1*** Settings *** 2 3Documentation VMI static/dynamic IP config tests. 4 5Resource ../../lib/resource.robot 6Resource ../../lib/bmc_redfish_resource.robot 7Resource ../../lib/openbmc_ffdc.robot 8Resource ../../lib/bmc_redfish_utils.robot 9Library ../../lib/bmc_network_utils.py 10 11Suite Setup Suite Setup Execution 12Test Teardown FFDC On Test Case Fail 13Suite Teardown Redfish.Logout 14 15*** Variables *** 16 17# users User Name password 18@{ADMIN} admin_user TestPwd123 19@{OPERATOR} operator_user TestPwd123 20@{ReadOnly} readonly_user TestPwd123 21@{NoAccess} noaccess_user TestPwd123 22&{USERS} Administrator=${ADMIN} Operator=${OPERATOR} ReadOnly=${ReadOnly} 23... NoAccess=${NoAccess} 24 25${test_ipv4} 10.6.6.6 26${test_gateway} 10.6.6.1 27${test_netmask} 255.255.252.0 28 29&{DHCP_ENABLED} DHCPEnabled=${${True}} 30&{DHCP_DISABLED} DHCPEnabled=${${False}} 31 32&{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} 33&{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} 34${wait_time} 10s 35 36 37*** Test Cases *** 38 39Verify All VMI EthernetInterfaces 40 [Documentation] Verify all VMI ethernet interfaces. 41 [Tags] Verify_All_VMI_EthernetINterfaces 42 43 Verify VMI EthernetInterfaces 44 45 46Verify Existing VMI Network Interface Details 47 [Documentation] Verify existing VMI network interface details. 48 [Tags] Verify_VMI_Network_Interface_Details 49 50 ${vmi_ip}= Get VMI Network Interface Details 51 ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP 52 53 Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} 54 Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} 55 Should Be Equal As Strings ${vmi_ip["Id"]} intf0 56 Should Be Equal As Strings ${vmi_ip["Description"]} 57 ... Ethernet Interface for Virtual Management Interface 58 Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface 59 Should Be True ${vmi_ip["InterfaceEnabled"]} 60 61 62Delete Existing Static VMI IP Address 63 [Documentation] Delete existing static VMI IP address. 64 [Tags] Delete_Existing_Static_VMI_IP_Address 65 66 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 67 Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} 68 69 Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED} 70 ${default}= Set Variable 0.0.0.0 71 Verify VMI Network Interface Details ${default} Static ${default} ${default} 72 73 74Verify User Cannot Delete ReadOnly Property IPv4Addresses 75 [Documentation] Verify user cannot delete readonly property IPv4Addresses. 76 [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses 77 78 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 79 Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 80 Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} 81 82 83Assign Valid And Invalid Static IPv4 Address To VMI 84 [Documentation] Assign static IPv4 address to VMI. 85 [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI 86 [Template] Set Static IPv4 Address To VMI And Verify 87 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 88 89 # ip gateway netmask valid_status_code 90 10.5.20.30 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 91 a.3.118.94 0.0.0.0 255.255.252.0 ${HTTP_BAD_REQUEST} 92 93 94Add Multiple IP Addreses On VMI Interface And Verify 95 [Documentation] Add multiple IP addreses on VMI interface and verify. 96 [Tags] Add_Multiple_IP_Addreses_On_VMI_Interface_And_Verify 97 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 98 99 ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=0.0.0.0 100 ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=0.0.0.0 101 ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=0.0.0.0 102 ${ips}= Create List ${ip1} ${ip2} ${ip3} 103 104 Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 105 ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_ACCEPTED}] 106 Verify VMI Network Interface Details ${ip1["Address"]} Static ${ip1["Gateway"]} ${ip1["SubnetMask"]} 107 108 109Modify IP Addresses On VMI Interface And Verify 110 [Documentation] Modify IP addresses on VMI interface and verify. 111 [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify 112 [Template] Set Static IPv4 Address To VMI And Verify 113 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 114 115 # ip gateway netmask valid_status_code 116 10.5.5.10 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 117 10.5.5.11 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 118 119Switch Between IP Origins On VMI And Verify Details 120 [Documentation] Switch between IP origins on VMI and verify details. 121 [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details 122 123 Switch VMI IPv4 Origin And Verify Details 124 Switch VMI IPv4 Origin And Verify Details 125 126 127Verify Persistency Of VMI IPv4 Details After Host Reboot 128 [Documentation] Verify persistency of VMI IPv4 details after host reboot. 129 [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot 130 131 # Verifying persistency of dynamic address. 132 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 133 ${default}= Set Variable 0.0.0.0 134 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 135 136 # Verifying persistency of static address. 137 Switch VMI IPv4 Origin And Verify Details 138 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 139 140 141Delete VMI Static IP Address And Verify 142 [Documentation] Delete VMI static IP address and verify. 143 [Tags] Delete_VMI_Static_IP_Address_And_Verify 144 [Teardown] Test Teardown Execution 145 146 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 147 Delete VMI IPv4 Address 148 ${resp}= Redfish.Get 149 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 150 Should Be Empty ${resp.dict["IPv4Addresses"]} 151 152 153Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete 154 [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. 155 [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete 156 [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Execution 157 158 Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} 159 160 ${session_info}= Get Redfish Session Info 161 Redfish.Delete ${session_info["location"]} 162 163 # Create a new Redfish session 164 Redfish Power Off 165 Redfish Power On 166 167 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 168 169 170Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots 171 [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots 172 [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots 173 [Teardown] Test Teardown Execution 174 175 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 176 ${vmi_ip_config}= Get VMI Network Interface Details 177 # Verifying persistency of dynamic address after multiple reboots. 178 FOR ${i} IN RANGE ${2} 179 Redfish Power Off 180 Redfish Power On 181 Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} 182 ... ${vmi_ip_config["IPv4_SubnetMask"]} 183 END 184 185 186Enable DHCP When Static IP Configured And Verify Static IP 187 [Documentation] Enable DHCP when static ip configured and verify static ip 188 [Tags] Enable_DHCP_when_Static_IP_Configured_And_Verify_Static_IP 189 [Teardown] Test Teardown Execution 190 191 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 192 Set VMI IPv4 Origin ${True} 193 ${vmi_network_conf}= Get VMI Network Interface Details 194 Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]} 195 196 197Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot 198 [Documentation] Verify VMI static IP configuration persist on BMC reset. 199 [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot 200 [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail 201 202 Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} 203 OBMC Reboot (off) 204 Redfish Power On 205 # Verifying the VMI static configuration 206 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 207 208 209Verify To Configure VMI Static IP Address With Different User Roles 210 [Documentation] Verify to configure vmi static ip address with different user roles. 211 [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles 212 [Setup] Create Users With Different Roles users=${USERS} force=${True} 213 [Template] Config VMI Static IP Address Using Different Users 214 [Teardown] Delete BMC Users Using Redfish 215 216 # username password ip_address gateway nemask valid_status_code 217 admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED} 218 operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 219 readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 220 noaccess_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 221 222 223Verify To Delete VMI Static IP Address With Different User Roles 224 [Documentation] Verify to delete vmi static IP address with different user roles. 225 [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles 226 [Setup] Create Users With Different Roles users=${USERS} force=${True} 227 [Template] Delete VMI Static IP Address Using Different Users 228 [Teardown] Delete BMC Users Using Redfish 229 230 # username password valid_status_code 231 admin_user TestPwd123 ${HTTP_ACCEPTED} 232 operator_user TestPwd123 ${HTTP_FORBIDDEN} 233 readonly_user TestPwd123 ${HTTP_FORBIDDEN} 234 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 235 236 237Verify To Update VMI Static IP Address With Different User Roles 238 [Documentation] Verify to update vmi static IP address with different user roles. 239 [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles_And_Verify 240 [Setup] Create Users With Different Roles users=${USERS} force=${True} 241 [Template] Config VMI Static IP Address Using Different Users 242 [Teardown] Delete BMC Users Using Redfish 243 244 # username password ip_address gateway nemask valid_status_code 245 admin_user TestPwd123 10.5.10.20 0.0.0.0 255.255.0.0 ${HTTP_ACCEPTED} 246 operator_user TestPwd123 10.5.10.30 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 247 readonly_user TestPwd123 10.5.20.40 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 248 noaccess_user TestPwd123 10.5.30.50 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 249 250 251Verify To Read VMI Network Configuration With Different User Roles 252 [Documentation] Verify to read vmi network configuration with different user roles. 253 [Tags] Verify_To_Read_VMI_Network_Configuration_Via_Different_User_Roles 254 [Setup] Create Users With Different Roles users=${USERS} force=${True} 255 [Template] Read VMI Static IP Address Using Different Users 256 [Teardown] Delete BMC Users Using Redfish 257 258 # username password valid_status_code 259 admin_user TestPwd123 ${HTTP_OK} 260 operator_user TestPwd123 ${HTTP_OK} 261 readonly_user TestPwd123 ${HTTP_OK} 262 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 263 264Enable DHCP On VMI Network Via Different Users Roles And Verify 265 [Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify. 266 [Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 267 [Setup] Create Users With Different Roles users=${USERS} force=${True} 268 [Template] Update User Role And Set VMI IPv4 Origin 269 [Teardown] Delete BMC Users Using Redfish 270 271 # username password dhcp_enabled valid_status_code 272 admin_user TestPwd123 ${True} ${HTTP_ACCEPTED} 273 operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 274 readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 275 noaccess_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 276 277Disable DHCP On VMI Network Via Different Users Roles And Verify 278 [Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify. 279 [Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 280 [Setup] Create Users With Different Roles users=${USERS} force=${True} 281 [Template] Update User Role And Set VMI IPv4 Origin 282 [Teardown] Delete BMC Users Using Redfish 283 284 # username password dhcp_enabled valid_status_code 285 admin_user TestPwd123 ${False} ${HTTP_ACCEPTED} 286 operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 287 readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 288 noaccess_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 289 290 291Enable And Disable DHCP And Verify 292 [Documentation] verify enable DHCP and disable DHCP. 293 [Tags] Enabled_And_Disabled_DHCP_Verify 294 295 Set VMI IPv4 Origin ${True} 296 ${default}= Set Variable 0.0.0.0 297 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 298 Set VMI IPv4 Origin ${False} 299 ${resp}= Redfish.Get 300 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 301 Should Be Empty ${resp.dict["IPv4Addresses"]} 302 303 304Multiple Times Enable And Disable DHCP And Verify 305 [Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP 306 ... each time when DHCP is enabled 307 [Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify 308 309 ${default}= Set Variable 0.0.0.0 310 FOR ${i} IN RANGE ${2} 311 Set VMI IPv4 Origin ${True} 312 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 313 Set VMI IPv4 Origin ${False} 314 ${resp}= Redfish.Get 315 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 316 Should Be Empty ${resp.dict["IPv4Addresses"]} 317 END 318 319 320*** Keywords *** 321 322Suite Setup Execution 323 [Documentation] Do test setup execution task. 324 325 Redfish.Login 326 Redfish Power On 327 ${active_channel_config}= Get Active Channel Config 328 Set Suite Variable ${active_channel_config} 329 ${resp}= Redfish.Get 330 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 331 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 332 ${length}= Get Length ${ip_resp["IPv4StaticAddresses"]} 333 ${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details 334 Set Suite Variable ${vmi_network_conf} 335 336 337Test Teardown Execution 338 [Documentation] Do test teardown execution task. 339 340 FFDC On Test Case Fail 341 ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 342 Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False} 343 Run Keyword If ${vmi_network_conf} != ${None} 344 ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} 345 ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} 346 347 348Get VMI Network Interface Details 349 [Documentation] Get VMI network interface details. 350 [Arguments] ${valid_status_code}=${HTTP_OK} 351 352 # Description of argument(s): 353 # valid_status_code Expected valid status code from GET request. 354 355 # Note: It returns a dictionary of VMI eth0 parameters. 356 357 ${active_channel_config}= Get Active Channel Config 358 ${resp}= Redfish.Get 359 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 360 ... valid_status_codes=[${valid_status_code}] 361 362 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 363 364 ${static_exists}= Run Keyword And Ignore Error 365 ... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]} 366 ${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False} 367 368 ${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]} 369 ... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]} 370 ... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]} 371 ... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]} 372 ... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}} 373 ... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} 374 ... IPv4StaticAddresses=${${static_exists}} 375 376 [Return] &{vmi_ip} 377 378 379Get Immediate Child Parameter From VMI Network Interface 380 [Documentation] Get immediate child parameter from VMI network interface. 381 [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} 382 383 # Description of argument(s): 384 # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. 385 # valid_status_code Expected valid status code from GET request. 386 387 ${active_channel_config}= Get Active Channel Config 388 ${resp}= Redfish.Get 389 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 390 ... valid_status_codes=[${valid_status_code}] 391 392 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 393 ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} 394 ... ${ip_resp["DHCPv4"]["${parameter}"]} 395 396 [Return] ${value} 397 398 399Verify VMI EthernetInterfaces 400 [Documentation] Verify VMI ethernet interfaces. 401 [Arguments] ${valid_status_code}=${HTTP_OK} 402 403 # Description of argument(s): 404 # valid_status_code Expected valid status code from GET request. 405 406 ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces 407 ... valid_status_codes=[${valid_status_code}] 408 409 ${resp}= Evaluate json.loads('''${resp.text}''') json 410 ${interfaces}= Set Variable ${resp["Members"]} 411 412 Should Be Equal As Strings ${interfaces[0]}[@odata.id] 413 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 414 Should Be Equal As Strings ${interfaces[1]}[@odata.id] 415 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1 416 417 Should Be Equal ${resp["Members@odata.count"]} ${2} 418 419 420Verify VMI Network Interface Details 421 [Documentation] Verify VMI network interface details. 422 [Arguments] ${ip} ${origin} ${gateway} ${netmask} 423 ... ${valid_status_code}=${HTTP_OK} 424 425 # Description of argument(s): 426 # ip VMI IPv4 address. 427 # origin Origin of IPv4 address eg. Static or DHCP. 428 # gateway Gateway for VMI IP. 429 # netmask Subnetmask for VMI IP. 430 # valid_status_code Expected valid status code from GET request. Default is HTTP_OK. 431 432 ${vmi_ip}= Get VMI Network Interface Details ${valid_status_code} 433 Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} 434 Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]} 435 Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]} 436 Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]} 437 438 439Set Static IPv4 Address To VMI And Verify 440 [Documentation] Set static IPv4 address to VMI. 441 [Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED} 442 443 # Description of argument(s): 444 # ip VMI IPv4 address. 445 # gateway Gateway for VMI IP. 446 # netmask Subnetmask for VMI IP. 447 # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. 448 449 ${data}= Set Variable 450 ... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]} 451 452 ${active_channel_config}= Get Active Channel Config 453 ${resp}= Redfish.Patch 454 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 455 ... body=${data} valid_status_codes=[${valid_status_code}] 456 457 # Wait few seconds for new configuration to get populated on runtime. 458 Sleep ${wait_time} 459 460 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 461 Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} 462 463 464Delete VMI IPv4 Address 465 [Documentation] Delete VMI IPv4 address. 466 [Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED} 467 468 # Description of argument(s): 469 # delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses. 470 # Default is IPv4StaticAddresses. 471 # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. 472 473 ${data}= Set Variable {"${delete_param}": [${Null}]} 474 ${active_channel_config}= Get Active Channel Config 475 ${resp}= Redfish.Patch 476 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 477 ... body=${data} valid_status_codes=[${valid_status_code}] 478 479 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 480 ${resp}= Redfish.Get 481 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 482 Should Be Empty ${resp.dict["IPv4StaticAddresses"]} 483 484 485Set VMI IPv4 Origin 486 [Documentation] Set VMI IPv4 origin. 487 [Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED} 488 489 # Description of argument(s): 490 # dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False. 491 # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. 492 493 ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} 494 ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data} 495 ... valid_status_codes=[${valid_status_code}] 496 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 497 ${resp}= Redfish.Get 498 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 499 Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} 500 501 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 502 ${resp}= Redfish.Get 503 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 504 Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} 505 506 507Switch VMI IPv4 Origin And Verify Details 508 [Documentation] Switch VMI IPv4 origin and verify details. 509 510 ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 511 ${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False} 512 513 ${default}= Set Variable 0.0.0.0 514 ${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static 515 Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} 516 Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} 517 518 519Delete VMI Static IP Address Using Different Users 520 [Documentation] Update user role and delete vmi static IP address. 521 [Arguments] ${username} ${password} ${valid_status_code} 522 [Teardown] Run Keywords Redfish.Login AND 523 ... Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} 524 ... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout 525 526 # Description of argument(s): 527 # username The host username. 528 # password The host password. 529 # valid_status_code The expected valid status code. 530 531 Redfish.Login ${username} ${password} 532 Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code} 533 Redfish.Logout 534 535 536Config VMI Static IP Address Using Different Users 537 [Documentation] Update user role and update vmi static ip address. 538 [Arguments] ${username} ${password} ${ip} ${gateway} ${netmask} 539 ... ${valid_status_code} 540 541 # Description of argument(s): 542 # username The host username. 543 # password The host password. 544 # ip IP address to be added (e.g. "10.7.7.7"). 545 # subnet_mask Subnet mask for the IP to be added 546 # (e.g. "255.255.0.0"). 547 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 548 # valid_status_code The expected valid status code. 549 550 Redfish.Login ${username} ${password} 551 Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code} 552 Redfish.Logout 553 554 555Read VMI Static IP Address Using Different Users 556 [Documentation] Update user role and read vmi static ip address. 557 [Arguments] ${username} ${password} ${valid_status_code} 558 559 # Description of argument(s): 560 # username The host username. 561 # password The host password. 562 # valid_status_code The expected valid status code. 563 564 Redfish.Login ${username} ${password} 565 Redfish.Get 566 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 567 ... valid_status_codes=[${valid_status_code}] 568 Redfish.Logout 569 570 571Delete BMC Users Using Redfish 572 [Documentation] Delete BMC users via redfish. 573 574 Redfish.Login 575 Delete BMC Users Via Redfish users=${USERS} 576 577Update User Role And Set VMI IPv4 Origin 578 [Documentation] Update User Role And Set VMI IPv4 Origin. 579 [Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code} 580 581 # Description of argument(s): 582 # username The host username. 583 # password The host password. 584 # dhcp_enabled Indicates whether dhcp should be enabled 585 # (${True}, ${False}). 586 # valid_status_code The expected valid status code. 587 588 Redfish.Login ${username} ${password} 589 Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code} 590 Redfish.Logout 591