1*** Settings *** 2 3Documentation VMI static/dynamic IP config tests. 4 5Resource ../../lib/resource.robot 6Resource ../../lib/bmc_redfish_resource.robot 7Resource ../../lib/openbmc_ffdc.robot 8Resource ../../lib/bmc_redfish_utils.robot 9Library ../../lib/bmc_network_utils.py 10 11Suite Setup Suite Setup Execution 12Test Teardown FFDC On Test Case Fail 13Suite Teardown Redfish.Logout 14 15*** Variables *** 16 17# users User Name password 18@{ADMIN} admin_user TestPwd123 19@{OPERATOR} operator_user TestPwd123 20@{ReadOnly} readonly_user TestPwd123 21@{NoAccess} noaccess_user TestPwd123 22&{USERS} Administrator=${ADMIN} Operator=${OPERATOR} ReadOnly=${ReadOnly} 23... NoAccess=${NoAccess} 24 25${test_ipv4} 10.6.6.6 26${test_gateway} 10.6.6.1 27${test_netmask} 255.255.252.0 28 29&{DHCP_ENABLED} DHCPEnabled=${${True}} 30&{DHCP_DISABLED} DHCPEnabled=${${False}} 31 32&{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} 33&{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} 34${wait_time} 10s 35 36 37*** Test Cases *** 38 39Verify All VMI EthernetInterfaces 40 [Documentation] Verify all VMI ethernet interfaces. 41 [Tags] Verify_All_VMI_EthernetINterfaces 42 43 Verify VMI EthernetInterfaces 44 45 46Verify Existing VMI Network Interface Details 47 [Documentation] Verify existing VMI network interface details. 48 [Tags] Verify_VMI_Network_Interface_Details 49 50 ${vmi_ip}= Get VMI Network Interface Details 51 ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP 52 53 Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} 54 Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} 55 Should Be Equal As Strings ${vmi_ip["Id"]} intf0 56 Should Be Equal As Strings ${vmi_ip["Description"]} 57 ... Ethernet Interface for Virtual Management Interface 58 Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface 59 Should Be True ${vmi_ip["InterfaceEnabled"]} 60 61 62Delete Existing Static VMI IP Address 63 [Documentation] Delete existing static VMI IP address. 64 [Tags] Delete_Existing_Static_VMI_IP_Address 65 66 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 67 Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} 68 69 Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED} 70 ${default}= Set Variable 0.0.0.0 71 Verify VMI Network Interface Details ${default} Static ${default} ${default} 72 73 74Verify User Cannot Delete ReadOnly Property IPv4Addresses 75 [Documentation] Verify user cannot delete readonly property IPv4Addresses. 76 [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses 77 78 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 79 Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 80 Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} 81 82 83Assign Valid And Invalid Static IPv4 Address To VMI 84 [Documentation] Assign static IPv4 address to VMI. 85 [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI 86 [Template] Set Static IPv4 Address To VMI And Verify 87 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 88 89 # ip gateway netmask valid_status_code 90 10.5.20.30 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 91 a.3.118.94 0.0.0.0 255.255.252.0 ${HTTP_BAD_REQUEST} 92 93 94Add Multiple IP Addreses On VMI Interface And Verify 95 [Documentation] Add multiple IP addreses on VMI interface and verify. 96 [Tags] Add_Multiple_IP_Addreses_On_VMI_Interface_And_Verify 97 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 98 99 ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=0.0.0.0 100 ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=0.0.0.0 101 ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=0.0.0.0 102 ${ips}= Create List ${ip1} ${ip2} ${ip3} 103 104 Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 105 ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_ACCEPTED}] 106 Verify VMI Network Interface Details ${ip1["Address"]} Static ${ip1["Gateway"]} ${ip1["SubnetMask"]} 107 108 109Modify IP Addresses On VMI Interface And Verify 110 [Documentation] Modify IP addresses on VMI interface and verify. 111 [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify 112 [Template] Set Static IPv4 Address To VMI And Verify 113 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 114 115 # ip gateway netmask valid_status_code 116 10.5.5.10 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 117 10.5.5.11 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} 118 119Switch Between IP Origins On VMI And Verify Details 120 [Documentation] Switch between IP origins on VMI and verify details. 121 [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details 122 123 Switch VMI IPv4 Origin And Verify Details 124 Switch VMI IPv4 Origin And Verify Details 125 126 127Verify Persistency Of VMI IPv4 Details After Host Reboot 128 [Documentation] Verify persistency of VMI IPv4 details after host reboot. 129 [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot 130 131 # Verifying persistency of dynamic address. 132 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 133 ${default}= Set Variable 0.0.0.0 134 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 135 136 # Verifying persistency of static address. 137 Switch VMI IPv4 Origin And Verify Details 138 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 139 140 141Delete VMI Static IP Address And Verify 142 [Documentation] Delete VMI static IP address and verify. 143 [Tags] Delete_VMI_Static_IP_Address_And_Verify 144 [Teardown] Test Teardown Execution 145 146 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 147 Delete VMI IPv4 Address 148 ${resp}= Redfish.Get 149 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 150 Should Be Empty ${resp.dict["IPv4Addresses"]} 151 152 153Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete 154 [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. 155 [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete 156 [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Execution 157 158 Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} 159 160 ${session_info}= Get Redfish Session Info 161 Redfish.Delete ${session_info["location"]} 162 163 # Create a new Redfish session 164 Redfish Power Off 165 Redfish Power On 166 167 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 168 169 170Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots 171 [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots 172 [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots 173 [Teardown] Test Teardown Execution 174 175 ${LOOP_COUNT}= Set Variable ${3} 176 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 177 Run Keywords Redfish Power Off AND Redfish Power On 178 ${vmi_ip_config}= Get VMI Network Interface Details 179 # Verifying persistency of dynamic address after multiple reboots. 180 Repeat Keyword ${LOOP_COUNT} times 181 ... Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} 182 ... ${vmi_ip_config["IPv4_SubnetMask"]} 183 184 185Enable DHCP When Static IP Configured And Verify Static IP 186 [Documentation] Enable DHCP when static ip configured and verify static ip 187 [Tags] Enable_DHCP_when_Static_IP_Configured_And_Verify_Static_IP 188 [Teardown] Test Teardown Execution 189 190 Verify Assigning Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} 191 Set VMI IPv4 Origin ${True} 192 ${vmi_network_conf}= Get VMI Network Interface Details 193 Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]} 194 195 196Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot 197 [Documentation] Verify VMI static IP configuration persist on BMC reset. 198 [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot 199 [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail 200 201 Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} 202 OBMC Reboot (off) 203 Redfish Power On 204 # Verifying the VMI static configuration 205 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 206 207 208Verify To Configure VMI Static IP Address With Different User Roles 209 [Documentation] Verify to configure vmi static ip address with different user roles. 210 [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles 211 [Setup] Create Users With Different Roles users=${USERS} force=${True} 212 [Template] Config VMI Static IP Address Using Different Users 213 [Teardown] Delete BMC Users Using Redfish 214 215 # username password ip_address gateway nemask valid_status_code 216 admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED} 217 operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 218 readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 219 noaccess_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 220 221 222Verify To Delete VMI Static IP Address With Different User Roles 223 [Documentation] Verify to delete vmi static IP address with different user roles. 224 [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles 225 [Setup] Create Users With Different Roles users=${USERS} force=${True} 226 [Template] Delete VMI Static IP Address Using Different Users 227 [Teardown] Delete BMC Users Using Redfish 228 229 # username password valid_status_code 230 admin_user TestPwd123 ${HTTP_ACCEPTED} 231 operator_user TestPwd123 ${HTTP_FORBIDDEN} 232 readonly_user TestPwd123 ${HTTP_FORBIDDEN} 233 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 234 235 236Verify To Update VMI Static IP Address With Different User Roles 237 [Documentation] Verify to update vmi static IP address with different user roles. 238 [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles_And_Verify 239 [Setup] Create Users With Different Roles users=${USERS} force=${True} 240 [Template] Config VMI Static IP Address Using Different Users 241 [Teardown] Delete BMC Users Using Redfish 242 243 # username password ip_address gateway nemask valid_status_code 244 admin_user TestPwd123 10.5.10.20 0.0.0.0 255.255.0.0 ${HTTP_ACCEPTED} 245 operator_user TestPwd123 10.5.10.30 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 246 readonly_user TestPwd123 10.5.20.40 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 247 noaccess_user TestPwd123 10.5.30.50 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} 248 249 250Verify To Read VMI Network Configuration With Different User Roles 251 [Documentation] Verify to read vmi network configuration with different user roles. 252 [Tags] Verify_To_Read_VMI_Network_Configuration_Via_Different_User_Roles 253 [Setup] Create Users With Different Roles users=${USERS} force=${True} 254 [Template] Read VMI Static IP Address Using Different Users 255 [Teardown] Delete BMC Users Using Redfish 256 257 # username password valid_status_code 258 admin_user TestPwd123 ${HTTP_OK} 259 operator_user TestPwd123 ${HTTP_OK} 260 readonly_user TestPwd123 ${HTTP_OK} 261 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 262 263Enable DHCP On VMI Network Via Different Users Roles And Verify 264 [Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify. 265 [Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 266 [Setup] Create Users With Different Roles users=${USERS} force=${True} 267 [Template] Update User Role And Set VMI IPv4 Origin 268 [Teardown] Delete BMC Users Using Redfish 269 270 # username password dhcp_enabled valid_status_code 271 admin_user TestPwd123 ${True} ${HTTP_ACCEPTED} 272 operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 273 readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 274 noaccess_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 275 276Disable DHCP On VMI Network Via Different Users Roles And Verify 277 [Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify. 278 [Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 279 [Setup] Create Users With Different Roles users=${USERS} force=${True} 280 [Template] Update User Role And Set VMI IPv4 Origin 281 [Teardown] Delete BMC Users Using Redfish 282 283 # username password dhcp_enabled valid_status_code 284 admin_user TestPwd123 ${False} ${HTTP_ACCEPTED} 285 operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 286 readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 287 noaccess_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 288 289 290Enable And Disable DHCP And Verify 291 [Documentation] verify enable DHCP and disable DHCP. 292 [Tags] Enabled_And_Disabled_DHCP_Verify 293 294 Set VMI IPv4 Origin ${True} 295 ${default}= Set Variable 0.0.0.0 296 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 297 Set VMI IPv4 Origin ${False} 298 Verify VMI Network Interface Details ${default} Static ${default} ${default} 299 300 301Multiple Times Enable And Disable DHCP And Verify 302 [Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP 303 ... each time when DHCP is enabled 304 [Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify 305 306 ${default}= Set Variable 0.0.0.0 307 FOR ${i} IN RANGE ${2} 308 Set VMI IPv4 Origin ${True} 309 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 310 Set VMI IPv4 Origin ${False} 311 Verify VMI Network Interface Details ${default} Static ${default} ${default} 312 END 313 314 315*** Keywords *** 316 317Suite Setup Execution 318 [Documentation] Do test setup execution task. 319 320 Redfish.Login 321 Redfish Power On 322 ${active_channel_config}= Get Active Channel Config 323 Set Suite Variable ${active_channel_config} 324 ${resp}= Redfish.Get 325 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 326 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 327 ${length}= Get Length ${ip_resp["IPv4StaticAddresses"]} 328 ${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details 329 Set Suite Variable ${vmi_network_conf} 330 331 332Test Teardown Execution 333 [Documentation] Do test teardown execution task. 334 335 FFDC On Test Case Fail 336 ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 337 Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False} 338 Run Keyword If ${vmi_network_conf} != ${None} 339 ... Verify Assigning Static IPv4 Address To VMI ${vmi_network_conf["IPv4_Address"]} 340 ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} 341 342 343Get VMI Network Interface Details 344 [Documentation] Get VMI network interface details. 345 [Arguments] ${valid_status_code}=${HTTP_OK} 346 347 # Description of argument(s): 348 # valid_status_code Expected valid status code from GET request. 349 350 # Note: It returns a dictionary of VMI eth0 parameters. 351 352 ${active_channel_config}= Get Active Channel Config 353 ${resp}= Redfish.Get 354 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 355 ... valid_status_codes=[${valid_status_code}] 356 357 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 358 359 ${static_exists}= Run Keyword And Ignore Error 360 ... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]} 361 ${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False} 362 363 ${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]} 364 ... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]} 365 ... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]} 366 ... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]} 367 ... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}} 368 ... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} 369 ... IPv4StaticAddresses=${${static_exists}} 370 371 [Return] &{vmi_ip} 372 373 374Get Immediate Child Parameter From VMI Network Interface 375 [Documentation] Get immediate child parameter from VMI network interface. 376 [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} 377 378 # Description of argument(s): 379 # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. 380 # valid_status_code Expected valid status code from GET request. 381 382 ${active_channel_config}= Get Active Channel Config 383 ${resp}= Redfish.Get 384 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 385 ... valid_status_codes=[${valid_status_code}] 386 387 ${ip_resp}= Evaluate json.loads('''${resp.text}''') json 388 ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} 389 ... ${ip_resp["DHCPv4"]["${parameter}"]} 390 391 [Return] ${value} 392 393 394Verify VMI EthernetInterfaces 395 [Documentation] Verify VMI ethernet interfaces. 396 [Arguments] ${valid_status_code}=${HTTP_OK} 397 398 # Description of argument(s): 399 # valid_status_code Expected valid status code from GET request. 400 401 ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces 402 ... valid_status_codes=[${valid_status_code}] 403 404 ${resp}= Evaluate json.loads('''${resp.text}''') json 405 ${interfaces}= Set Variable ${resp["Members"]} 406 407 Should Be Equal As Strings ${interfaces[0]}[@odata.id] 408 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 409 Should Be Equal As Strings ${interfaces[1]}[@odata.id] 410 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1 411 412 Should Be Equal ${resp["Members@odata.count"]} ${2} 413 414 415Verify VMI Network Interface Details 416 [Documentation] Verify VMI network interface details. 417 [Arguments] ${ip} ${origin} ${gateway} ${netmask} 418 ... ${valid_status_code}=${HTTP_OK} 419 420 # Description of argument(s): 421 # ip VMI IPv4 address. 422 # origin Origin of IPv4 address eg. Static or DHCP. 423 # gateway Gateway for VMI IP. 424 # netmask Subnetmask for VMI IP. 425 # valid_status_code Expected valid status code from GET request. Default is HTTP_OK. 426 427 ${vmi_ip}= Get VMI Network Interface Details ${valid_status_code} 428 Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} 429 Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]} 430 Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]} 431 Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]} 432 433 434Set Static IPv4 Address To VMI And Verify 435 [Documentation] Set static IPv4 address to VMI. 436 [Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED} 437 438 # Description of argument(s): 439 # ip VMI IPv4 address. 440 # gateway Gateway for VMI IP. 441 # netmask Subnetmask for VMI IP. 442 # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. 443 444 ${data}= Set Variable 445 ... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]} 446 447 ${active_channel_config}= Get Active Channel Config 448 ${resp}= Redfish.Patch 449 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 450 ... body=${data} valid_status_codes=[${valid_status_code}] 451 452 # Wait few seconds for new configuration to get populated on runtime. 453 Sleep ${wait_time} 454 455 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 456 Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} 457 458 459Delete VMI IPv4 Address 460 [Documentation] Delete VMI IPv4 address. 461 [Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED} 462 463 # Description of argument(s): 464 # delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses. 465 # Default is IPv4StaticAddresses. 466 # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. 467 468 ${data}= Set Variable {"${delete_param}": [${Null}]} 469 ${active_channel_config}= Get Active Channel Config 470 ${resp}= Redfish.Patch 471 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 472 ... body=${data} valid_status_codes=[${valid_status_code}] 473 474 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 475 ${resp}= Redfish.Get 476 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 477 Should Be Empty ${resp.dict["IPv4StaticAddresses"]} 478 479 480Set VMI IPv4 Origin 481 [Documentation] Set VMI IPv4 origin. 482 [Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED} 483 484 # Description of argument(s): 485 # dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False. 486 # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. 487 488 ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} 489 ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data} 490 ... valid_status_codes=[${valid_status_code}] 491 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 492 ${resp}= Redfish.Get 493 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 494 Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} 495 496 Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} 497 ${resp}= Redfish.Get 498 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 499 Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} 500 501 502Switch VMI IPv4 Origin And Verify Details 503 [Documentation] Switch VMI IPv4 origin and verify details. 504 505 ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 506 ${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False} 507 508 ${default}= Set Variable 0.0.0.0 509 ${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static 510 Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} 511 Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} 512 513 514Delete VMI Static IP Address Using Different Users 515 [Documentation] Update user role and delete vmi static IP address. 516 [Arguments] ${username} ${password} ${valid_status_code} 517 [Teardown] Run Keywords Redfish.Login AND 518 ... Verify Assigning Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} 519 ... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout 520 521 # Description of argument(s): 522 # username The host username. 523 # password The host password. 524 # valid_status_code The expected valid status code. 525 526 Redfish.Login ${username} ${password} 527 Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code} 528 Redfish.Logout 529 530 531Config VMI Static IP Address Using Different Users 532 [Documentation] Update user role and update vmi static ip address. 533 [Arguments] ${username} ${password} ${ip} ${gateway} ${netmask} 534 ... ${valid_status_code} 535 536 # Description of argument(s): 537 # username The host username. 538 # password The host password. 539 # ip IP address to be added (e.g. "10.7.7.7"). 540 # subnet_mask Subnet mask for the IP to be added 541 # (e.g. "255.255.0.0"). 542 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 543 # valid_status_code The expected valid status code. 544 545 Redfish.Login ${username} ${password} 546 Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code} 547 Redfish.Logout 548 549 550Read VMI Static IP Address Using Different Users 551 [Documentation] Update user role and read vmi static ip address. 552 [Arguments] ${username} ${password} ${valid_status_code} 553 554 # Description of argument(s): 555 # username The host username. 556 # password The host password. 557 # valid_status_code The expected valid status code. 558 559 Redfish.Login ${username} ${password} 560 Redfish.Get 561 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} 562 ... valid_status_codes=[${valid_status_code}] 563 Redfish.Logout 564 565 566Delete BMC Users Using Redfish 567 [Documentation] Delete BMC users via redfish. 568 569 Redfish.Login 570 Delete BMC Users Via Redfish users=${USERS} 571 572Update User Role And Set VMI IPv4 Origin 573 [Documentation] Update User Role And Set VMI IPv4 Origin. 574 [Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code} 575 576 # Description of argument(s): 577 # username The host username. 578 # password The host password. 579 # dhcp_enabled Indicates whether dhcp should be enabled 580 # (${True}, ${False}). 581 # valid_status_code The expected valid status code. 582 583 Redfish.Login ${username} ${password} 584 Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code} 585 Redfish.Logout 586