1*** Settings *** 2 3Documentation VMI static/dynamic IP config tests. 4 5Resource ../../lib/external_intf/vmi_utils.robot 6 7Suite Setup Suite Setup Execution 8Test Teardown FFDC On Test Case Fail 9Suite Teardown Suite Teardown Execution 10 11*** Variables *** 12 13# users User Name password 14@{ADMIN} admin_user TestPwd123 15@{OPERATOR} operator_user TestPwd123 16@{ReadOnly} readonly_user TestPwd123 17@{NoAccess} noaccess_user TestPwd123 18&{USERS} Administrator=${ADMIN} Operator=${OPERATOR} ReadOnly=${ReadOnly} 19... NoAccess=${NoAccess} 20 21${test_ipv4} 10.6.6.6 22${test_gateway} 10.6.6.1 23${test_netmask} 255.255.252.0 24 25&{DHCP_ENABLED} DHCPEnabled=${${True}} 26&{DHCP_DISABLED} DHCPEnabled=${${False}} 27 28&{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} 29&{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} 30${wait_time} 10s 31 32 33*** Test Cases *** 34 35Verify All VMI EthernetInterfaces 36 [Documentation] Verify all VMI ethernet interfaces. 37 [Tags] Verify_All_VMI_EthernetInterfaces 38 39 Verify VMI EthernetInterfaces 40 41 42Verify Existing VMI Network Interface Details 43 [Documentation] Verify existing VMI network interface details. 44 [Tags] Verify_Existing_VMI_Network_Interface_Details 45 46 ${vmi_ip}= Get VMI Network Interface Details 47 ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP 48 Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} 49 Should Be Equal As Strings ${vmi_ip["Id"]} ${ethernet_interface} 50 Should Be Equal As Strings ${vmi_ip["Description"]} 51 ... Hypervisor's Virtual Management Ethernet Interface 52 Should Be Equal As Strings ${vmi_ip["Name"]} Hypervisor Ethernet Interface 53 Should Be True ${vmi_ip["InterfaceEnabled"]} 54 Run Keyword If ${vmi_ip["IPv4StaticAddresses"]} != @{empty} 55 ... Verify VMI Network Interface Details ${vmi_ip["IPv4_Address"]} 56 ... ${origin} ${vmi_ip["IPv4_Gateway"]} ${vmi_ip["IPv4_SubnetMask"]} 57 58 59Delete Existing Static VMI IP Address 60 [Documentation] Delete existing static VMI IP address. 61 [Tags] Delete_Existing_Static_VMI_IP_Address 62 63 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 64 Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} 65 66 Delete VMI IPv4 Address 67 68 69Verify User Cannot Delete ReadOnly Property IPv4Addresses 70 [Documentation] Verify user cannot delete readonly property IPv4Addresses. 71 [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses 72 73 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 74 Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} 75 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 76 Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_FORBIDDEN} 77 78 79Assign Valid And Invalid Static IPv4 Address To VMI 80 [Documentation] Assign static IPv4 address to VMI. 81 [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI 82 [Template] Set Static IPv4 Address To VMI And Verify 83 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 84 85 # ip gateway netmask valid_status_code 86 10.5.20.30 10.5.20.1 255.255.252.0 ${HTTP_ACCEPTED} 87 a.3.118.94 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} 88 10.5.20 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} 89 10.5.20.-5 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} 90 91 92Add Multiple IP Addresses On VMI Interface And Verify 93 [Documentation] Add multiple IP addresses on VMI interface and verify. 94 [Tags] Add_Multiple_IP_Addresses_On_VMI_Interface_And_Verify 95 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 96 97 ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=10.5.5.1 98 ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=10.5.5.1 99 ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=10.5.5.1 100 ${ips}= Create List ${ip1} ${ip2} ${ip3} 101 102 Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 103 ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_BAD_REQUEST}] 104 105 106Modify IP Addresses On VMI Interface And Verify 107 [Documentation] Modify IP addresses on VMI interface and verify. 108 [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify 109 [Template] Set Static IPv4 Address To VMI And Verify 110 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 111 112 # ip gateway netmask valid_status_code 113 10.5.5.10 10.5.5.1 255.255.252.0 ${HTTP_ACCEPTED} 114 10.5.5.11 10.5.5.1 255.255.252.0 ${HTTP_ACCEPTED} 115 116Switch Between IP Origins On VMI And Verify Details 117 [Documentation] Switch between IP origins on VMI and verify details. 118 [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details 119 120 Switch VMI IPv4 Origin And Verify Details 121 Switch VMI IPv4 Origin And Verify Details 122 123 124Verify Persistency Of VMI IPv4 Details After Host Reboot 125 [Documentation] Verify persistency of VMI IPv4 details after host reboot. 126 [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot 127 128 # Verifying persistency of dynamic address. 129 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 130 Redfish Power Off stack_mode=skip 131 Redfish Power On 132 ${default}= Set Variable 0.0.0.0 133 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 134 135 # Verifying persistency of static address. 136 Switch VMI IPv4 Origin And Verify Details 137 Redfish Power Off stack_mode=skip 138 Redfish Power On 139 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 140 141 142Delete VMI Static IP Address And Verify 143 [Documentation] Delete VMI static IP address and verify. 144 [Tags] Delete_VMI_Static_IP_Address_And_Verify 145 [Teardown] Test Teardown Execution 146 147 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 148 Delete VMI IPv4 Address 149 ${resp}= Redfish.Get 150 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 151 Should Be Empty ${resp.dict["IPv4Addresses"]} 152 153 154Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete 155 [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. 156 [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete 157 [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution 158 159 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 160 161 ${session_info}= Get Redfish Session Info 162 Redfish.Delete ${session_info["location"]} 163 164 # Create a new Redfish session 165 Redfish.Login 166 Redfish Power Off 167 Redfish Power On 168 169 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 170 171 172Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots 173 [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots 174 [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots 175 [Teardown] Test Teardown Execution 176 177 Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 178 ${vmi_ip_config}= Get VMI Network Interface Details 179 # Verifying persistency of dynamic address after multiple reboots. 180 FOR ${i} IN RANGE ${2} 181 Redfish Power Off 182 Redfish Power On 183 Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} 184 ... ${vmi_ip_config["IPv4_SubnetMask"]} 185 END 186 187 188Enable DHCP When Static IP Configured And Verify Static IP 189 [Documentation] Enable DHCP when static ip configured and verify static ip 190 [Tags] Enable_DHCP_When_Static_IP_Configured_And_Verify_Static_IP 191 [Setup] Redfish Power On 192 [Teardown] Test Teardown Execution 193 194 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 195 Set VMI IPv4 Origin ${True} 196 ${vmi_network_conf}= Get VMI Network Interface Details 197 Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]} 198 199 200Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot 201 [Documentation] Verify VMI static IP configuration persist on BMC reset. 202 [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot 203 [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail 204 205 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 206 OBMC Reboot (off) 207 Redfish Power On 208 # Verifying the VMI static configuration 209 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 210 211Add Static IP When Host Poweroff And Verify On Poweron 212 [Documentation] Add Static IP When Host Poweroff And Verify on power on 213 [Tags] Add_Static_IP_When_Host_Poweroff_And_Verify_On_Poweron 214 [Setup] Redfish Power Off 215 [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail 216 217 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 218 Redfish Power On 219 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 220 221Add VMI Static IP When Host Poweroff And Verify Static IP On BMC Reset 222 [Documentation] Add Static IP When Host Poweroff And Verify Static IP On BMC Reset. 223 [Tags] Add_VMI_Static_IP_When_Host_Poweroff_And_Verify_Static_IP_On_BMC_Reset 224 [Setup] Redfish Power Off 225 [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail 226 227 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 228 OBMC Reboot (off) 229 Redfish Power On 230 Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} 231 232Enable DHCP When No Static IP Configured And Verify DHCP IP 233 [Documentation] Enable DHCP when no static ip configured and verify dhcp ip 234 [Tags] Enable_DHCP_When_No_Static_IP_Configured_And_Verify_DHCP_IP 235 [Setup] Run Keyword And Ignore Error Delete VMI IPv4 Address 236 [Teardown] Test Teardown Execution 237 238 ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 239 Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} 240 ${vmi_ip_config}= Get VMI Network Interface Details 241 Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} 242 ... ${vmi_ip_config["IPv4_SubnetMask"]} 243 244Verify User Cannot Delete VMI DHCP IP Address 245 [Documentation] Verify user cannot delete VMI DHCP IP Address 246 [Tags] Verify_User_Cannot_Delete_VMI_DHCP_IP_Address 247 [Setup] Set VMI IPv4 Origin ${True} 248 [Teardown] Test Teardown Execution 249 250 Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_FORBIDDEN} 251 ${resp}= Redfish.Get 252 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 253 Should Not Be Empty ${resp.dict["IPv4Addresses"]} 254 255Enable DHCP When Static IP Configured DHCP Server Unavailable And Verify IP 256 [Documentation] Enable DHCP When Static IP Configured And DHCP Server Unavailable And Verify No IP. 257 [Tags] Enable_DHCP_When_Static_IP_Configured_DHCP_Server_Unavailable_And_Verify_IP 258 [Teardown] Test Teardown Execution 259 260 Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} 261 Set VMI IPv4 Origin ${True} 262 ${default}= Set Variable 0.0.0.0 263 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 264 265 266Verify To Configure VMI Static IP Address With Different User Roles 267 [Documentation] Verify to configure vmi static ip address with different user roles. 268 [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles 269 [Setup] Create Users With Different Roles users=${USERS} force=${True} 270 [Template] Config VMI Static IP Address Using Different Users 271 [Teardown] Delete BMC Users Using Redfish 272 273 # username password ip_address gateway nemask valid_status_code 274 admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED} 275 operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 276 readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 277 noaccess_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} 278 279 280Verify To Delete VMI Static IP Address With Different User Roles 281 [Documentation] Verify to delete vmi static IP address with different user roles. 282 [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles 283 [Setup] Create Users With Different Roles users=${USERS} force=${True} 284 [Template] Delete VMI Static IP Address Using Different Users 285 [Teardown] Delete BMC Users Using Redfish 286 287 # username password valid_status_code 288 admin_user TestPwd123 ${HTTP_ACCEPTED} 289 operator_user TestPwd123 ${HTTP_FORBIDDEN} 290 readonly_user TestPwd123 ${HTTP_FORBIDDEN} 291 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 292 293 294Verify To Update VMI Static IP Address With Different User Roles 295 [Documentation] Verify to update vmi static IP address with different user roles. 296 [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles 297 [Setup] Create Users With Different Roles users=${USERS} force=${True} 298 [Template] Config VMI Static IP Address Using Different Users 299 [Teardown] Delete BMC Users Using Redfish 300 301 # username password ip_address gateway netmask valid_status_code 302 admin_user TestPwd123 10.5.10.20 10.5.10.1 255.255.0.0 ${HTTP_ACCEPTED} 303 operator_user TestPwd123 10.5.10.30 10.5.10.1 255.255.0.0 ${HTTP_FORBIDDEN} 304 readonly_user TestPwd123 10.5.20.40 10.5.20.1 255.255.0.0 ${HTTP_FORBIDDEN} 305 noaccess_user TestPwd123 10.5.30.50 10.5.30.1 255.255.0.0 ${HTTP_FORBIDDEN} 306 307 308Verify To Read VMI Network Configuration With Different User Roles 309 [Documentation] Verify to read vmi network configuration with different user roles. 310 [Tags] Verify_To_Read_VMI_Network_Configuration_With_Different_User_Roles 311 [Setup] Create Users With Different Roles users=${USERS} force=${True} 312 [Template] Read VMI Static IP Address Using Different Users 313 [Teardown] Delete BMC Users Using Redfish 314 315 # username password valid_status_code 316 admin_user TestPwd123 ${HTTP_OK} 317 operator_user TestPwd123 ${HTTP_OK} 318 readonly_user TestPwd123 ${HTTP_OK} 319 noaccess_user TestPwd123 ${HTTP_FORBIDDEN} 320 321Enable DHCP On VMI Network Via Different Users Roles And Verify 322 [Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify. 323 [Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 324 [Setup] Create Users With Different Roles users=${USERS} force=${True} 325 [Template] Update User Role And Set VMI IPv4 Origin 326 [Teardown] Delete BMC Users Using Redfish 327 328 # username password dhcp_enabled valid_status_code 329 admin_user TestPwd123 ${True} ${HTTP_ACCEPTED} 330 operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 331 readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 332 noaccess_user TestPwd123 ${True} ${HTTP_FORBIDDEN} 333 334Disable DHCP On VMI Network Via Different Users Roles And Verify 335 [Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify. 336 [Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify 337 [Setup] Create Users With Different Roles users=${USERS} force=${True} 338 [Template] Update User Role And Set VMI IPv4 Origin 339 [Teardown] Delete BMC Users Using Redfish 340 341 # username password dhcp_enabled valid_status_code 342 admin_user TestPwd123 ${False} ${HTTP_ACCEPTED} 343 operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 344 readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 345 noaccess_user TestPwd123 ${False} ${HTTP_FORBIDDEN} 346 347 348Enable And Disable DHCP And Verify 349 [Documentation] verify enable DHCP and disable DHCP. 350 [Tags] Enable_And_Disable_DHCP_And_Verify 351 352 Set VMI IPv4 Origin ${True} 353 ${default}= Set Variable 0.0.0.0 354 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 355 Set VMI IPv4 Origin ${False} 356 ${vmi_ip}= Get VMI Network Interface Details 357 Should Be Empty ${vmi_ip["IPv4_Address"]} 358 359 360Multiple Times Enable And Disable DHCP And Verify 361 [Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP 362 ... each time when DHCP is enabled 363 [Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify 364 365 ${default}= Set Variable 0.0.0.0 366 FOR ${i} IN RANGE ${2} 367 Set VMI IPv4 Origin ${True} 368 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} 369 Set VMI IPv4 Origin ${False} 370 ${vmi_ip}= Get VMI Network Interface Details 371 Should Be Empty ${vmi_ip["IPv4_Address"]} 372 END 373 374 375Assign Static IPv4 Address With Invalid Netmask To VMI 376 [Documentation] Assign static IPv4 address with invalid netmask and expect error. 377 [Tags] Assign_Static_IPv4_Address_With_Invalid_Netmask_To_VMI 378 [Template] Set Static IPv4 Address To VMI And Verify 379 380 # ip gateway netmask valid_status_code 381 ${test_ipv4} ${test_gateway} 255.256.255.0 ${HTTP_BAD_REQUEST} 382 ${test_ipv4} ${test_gateway} ff.ff.ff.ff ${HTTP_BAD_REQUEST} 383 ${test_ipv4} ${test_gateway} 255.255.253.0 ${HTTP_BAD_REQUEST} 384 385 386Assign Static IPv4 Address With Invalid Gateway To VMI 387 [Documentation] Add static IPv4 address with invalid gateway and expect error. 388 [Tags] Assign_Static_IPv4_Address_With_Invalid_Gateway_To_VMI 389 [Template] Set Static IPv4 Address To VMI And Verify 390 391 # ip gateway netmask valid_status_code 392 ${test_ipv4} @@@.%%.44.11 ${test_netmask} ${HTTP_BAD_REQUEST} 393 ${test_ipv4} 0xa.0xb.0xc.0xd ${test_netmask} ${HTTP_BAD_REQUEST} 394 ${test_ipv4} 10.3.36 ${test_netmask} ${HTTP_BAD_REQUEST} 395 ${test_ipv4} 10.3.36.-10 ${test_netmask} ${HTTP_BAD_REQUEST} 396 397 398*** Keywords *** 399 400Suite Setup Execution 401 [Documentation] Do test setup execution task. 402 403 Redfish.Login 404 Redfish Power On 405 ${active_channel_config}= Get Active Channel Config 406 Set Suite Variable ${active_channel_config} 407 Set Suite Variable ${ethernet_interface} ${active_channel_config['${CHANNEL_NUMBER}']['name']} 408 ${resp}= Redfish.Get 409 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 410 ${ip_resp}= Evaluate json.loads(r'''${resp.text}''') json 411 ${length}= Get Length ${ip_resp["IPv4StaticAddresses"]} 412 ${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details 413 Set Suite Variable ${vmi_network_conf} 414 415 416Test Teardown Execution 417 [Documentation] Do test teardown execution task. 418 419 FFDC On Test Case Fail 420 ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 421 Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False} 422 Run Keyword If ${vmi_network_conf} != ${None} 423 ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} 424 ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} 425 426 427Get Immediate Child Parameter From VMI Network Interface 428 [Documentation] Get immediate child parameter from VMI network interface. 429 [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} 430 431 # Description of argument(s): 432 # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. 433 # valid_status_code Expected valid status code from GET request. 434 435 ${resp}= Redfish.Get 436 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 437 ... valid_status_codes=[${valid_status_code}] 438 439 ${ip_resp}= Evaluate json.loads(r'''${resp.text}''') json 440 ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} 441 ... ${ip_resp["DHCPv4"]["${parameter}"]} 442 443 [Return] ${value} 444 445 446Switch VMI IPv4 Origin And Verify Details 447 [Documentation] Switch VMI IPv4 origin and verify details. 448 449 ${dhcp_mode_before}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 450 ${dhcp_enabled}= Set Variable If ${dhcp_mode_before} == ${False} ${True} ${False} 451 452 ${default}= Set Variable 0.0.0.0 453 ${origin}= Set Variable If ${dhcp_mode_before} == ${False} DHCP Static 454 Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} 455 456 ${dhcp_mode_after}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled 457 Should Not Be Equal ${dhcp_mode_before} ${dhcp_mode_after} 458 459 Run Keyword If ${dhcp_mode_after} == ${True} 460 ... Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} 461 462 463Delete VMI Static IP Address Using Different Users 464 [Documentation] Update user role and delete vmi static IP address. 465 [Arguments] ${username} ${password} ${valid_status_code} 466 [Teardown] Run Keywords Redfish.Login AND 467 ... Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} 468 ... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout 469 470 # Description of argument(s): 471 # username The host username. 472 # password The host password. 473 # valid_status_code The expected valid status code. 474 475 Redfish.Login ${username} ${password} 476 Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code} 477 478 479Config VMI Static IP Address Using Different Users 480 [Documentation] Update user role and update vmi static ip address. 481 [Arguments] ${username} ${password} ${ip} ${gateway} ${netmask} 482 ... ${valid_status_code} 483 484 # Description of argument(s): 485 # username The host username. 486 # password The host password. 487 # ip IP address to be added (e.g. "10.7.7.7"). 488 # subnet_mask Subnet mask for the IP to be added 489 # (e.g. "255.255.0.0"). 490 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 491 # valid_status_code The expected valid status code. 492 493 Redfish.Login ${username} ${password} 494 Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code} 495 496 497Read VMI Static IP Address Using Different Users 498 [Documentation] Update user role and read vmi static ip address. 499 [Arguments] ${username} ${password} ${valid_status_code} 500 501 # Description of argument(s): 502 # username The host username. 503 # password The host password. 504 # valid_status_code The expected valid status code. 505 506 Redfish.Login ${username} ${password} 507 Redfish.Get 508 ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} 509 ... valid_status_codes=[${valid_status_code}] 510 511 512Delete BMC Users Using Redfish 513 [Documentation] Delete BMC users via redfish. 514 515 Redfish.Login 516 Delete BMC Users Via Redfish users=${USERS} 517 518 519Update User Role And Set VMI IPv4 Origin 520 [Documentation] Update User Role And Set VMI IPv4 Origin. 521 [Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code} 522 523 # Description of argument(s): 524 # username The host username. 525 # password The host password. 526 # dhcp_enabled Indicates whether dhcp should be enabled 527 # (${True}, ${False}). 528 # valid_status_code The expected valid status code. 529 530 Redfish.Login ${username} ${password} 531 Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code} 532 533 534Suite Teardown Execution 535 [Documentation] Do suite teardown execution task. 536 537 Run Keyword If ${vmi_network_conf} != ${None} 538 ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} 539 ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} 540 Delete All Redfish Sessions 541 Redfish.Logout 542