1*** Settings ***
2Documentation  Verify the port recovery by simulating its disconnection.
3
4# Test Parameters:
5
6# OS_HOST             The OS host name or IP Address.
7# OS_USERNAME         The OS login userid (usually root).
8# OS_PASSWORD         The OS login password.
9# DEVICE_HOST         The network device hostname or IP where the ports will
10#                     be shutdown.
11# DEVICE_USERNAME     The network device username.
12# DEVICE_PASSWORD     The network device password.
13# PORT_NUMBER         The switch port where the server is connected (e.g.
14#                     "1", "2", etc).
15# NET_INTERFACE       The network interface name that will be tested (e.g.
16#                     "enP5s1f0", "eth0").
17
18Library         ../lib/bmc_ssh_utils.py
19Resource        ../lib/resource.robot
20Resource        ../lib/os_utilities.robot
21
22Suite Setup     Test Setup Execution
23
24Test Tags      Cable_Pull_Recover
25
26*** Variables ***
27
28${PORT_NUMBER}  ${EMPTY}
29
30*** Test Cases ***
31
32Verify Network Interface Recovery
33    [Documentation]  Test the recovery of the network interface that has been
34    ...  shutdown from the switch port.
35    [Tags]  Verify_Network_Interface_Recovery
36
37    Printn
38    Set Switch Port State  DOWN
39    Set Switch Port State  UP
40
41*** Keywords ***
42
43Set Switch Port State
44    [Documentation]  Disable the port connected to the server.
45    [Arguments]  ${port_number}=${PORT_NUMBER}  ${state}=${EMPTY}
46
47    # Description of argument(s):
48    # port_number     The switch port where the server is connected (e.g.
49    #                 "1", "2", etc).
50    # state           The state to be set in the network interface ("UP" or
51    #                 "DOWN").
52
53    Device Write  enable
54    Device Write  configure terminal
55    Device Write  interface port ${PORT_NUMBER}
56    Run Keyword If  '${state}' == 'DOWN'
57    ...    Device Write  shutdown
58    ...  ELSE
59    ...    Device Write  no shutdown
60    Wait Until Keyword Succeeds  30 sec  5 sec
61    ...  Check Network Interface State  ${state}
62
63Check Network Interface State
64    [Documentation]  Check the status of the network interface.
65    [Arguments]  ${NET_INTERFACE}=${NET_INTERFACE}  ${state}=${EMPTY}
66
67    # Description of argument(s):
68    # NET_INTERFACE   The network interface name that will be tested (e.g.
69    #                 "enP5s1f0", "eth0").
70    # state           The network interface expected state ("UP" or "DOWN").
71
72    ${stdout}  ${stderr}  ${rc}=  OS Execute Command
73    ...  ip link | grep "${NET_INTERFACE}" | cut -d " " -f9
74    Should Contain  ${stdout}  ${state}  msg=State not found as expected.
75
76Test Setup Execution
77    [Documentation]  Do suite setup tasks.
78
79    Should Not Be Empty  ${PORT_NUMBER}
80    Should Not Be Empty  ${NET_INTERFACE}
81