1*** Settings *** 2Resource ../lib/utils.robot 3Resource ../lib/connection_client.robot 4Resource ../lib/boot_utils.robot 5Library ../lib/gen_misc.py 6Library ../lib/utils.py 7Library ../lib/bmc_network_utils.py 8 9*** Variables *** 10# MAC input from user. 11${MAC_ADDRESS} ${EMPTY} 12 13 14*** Keywords *** 15 16Check And Reset MAC 17 [Documentation] Update BMC with user input MAC address. 18 [Arguments] ${mac_address}=${MAC_ADDRESS} 19 20 # Description of argument(s): 21 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 22 23 ${active_channel_config}= Get Active Channel Config 24 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 25 26 Should Not Be Empty ${mac_address} 27 Open Connection And Log In 28 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 29 ... cat /sys/class/net/${ethernet_interface}/address 30 Run Keyword If '${mac_address.lower()}' != '${bmc_mac_addr.lower()}' 31 ... Set MAC Address 32 33 34Set MAC Address 35 [Documentation] Update eth0 with input MAC address. 36 [Arguments] ${mac_address}=${MAC_ADDRESS} 37 38 # Description of argument(s): 39 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 40 41 ${active_channel_config}= Get Active Channel Config 42 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 43 44 Write fw_setenv ethaddr ${mac_address} 45 OBMC Reboot (off) 46 47 # Take SSH session post BMC reboot. 48 Open Connection And Log In 49 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 50 ... cat /sys/class/net/${ethernet_interface}/address 51 Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True 52 53 54Get BMC IP Info 55 [Documentation] Get system IP address and prefix length. 56 57 58 # Get system IP address and prefix length details using "ip addr" 59 # Sample Output of "ip addr": 60 # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000 61 # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff 62 # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0 63 64 ${active_channel_config}= Get Active Channel Config 65 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 66 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 67 ... /sbin/ip addr | grep ${ethernet_interface} 68 69 # Get line having IP address details. 70 ${lines}= Get Lines Containing String ${cmd_output} inet 71 72 # List IP address details. 73 @{ip_components}= Split To Lines ${lines} 74 75 @{ip_data}= Create List 76 77 # Get all IP addresses and prefix lengths on system. 78 FOR ${ip_component} IN @{ip_components} 79 @{if_info}= Split String ${ip_component} 80 ${ip_n_prefix}= Get From List ${if_info} 1 81 Append To List ${ip_data} ${ip_n_prefix} 82 END 83 84 [Return] ${ip_data} 85 86Get BMC Route Info 87 [Documentation] Get system route info. 88 89 90 # Sample output of "ip route": 91 # default via xx.xx.xx.x dev eth0 92 # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx 93 # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx 94 95 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 96 ... /sbin/ip route 97 98 [Return] ${cmd_output} 99 100# TODO: openbmc/openbmc-test-automation#1331 101Get BMC MAC Address 102 [Documentation] Get system MAC address. 103 104 105 # Sample output of "ip addr | grep ether": 106 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 107 108 ${active_channel_config}= Get Active Channel Config 109 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 110 111 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 112 ... /sbin/ip addr | grep ${ethernet_interface} -A 1 | grep ether 113 114 # Split the line and return MAC address. 115 # Split list data: 116 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 117 118 @{words}= Split String ${cmd_output} 119 120 [Return] ${words[1]} 121 122 123Get BMC MAC Address List 124 [Documentation] Get system MAC address 125 126 # Sample output of "ip addr | grep ether": 127 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 128 129 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 130 ... /sbin/ip addr | grep ether 131 132 # Split the line and return MAC address. 133 # Split list data: 134 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 135 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 136 137 ${mac_list}= Create List 138 @{lines}= Split To Lines ${cmd_output} 139 FOR ${line} IN @{lines} 140 @{words}= Split String ${line} 141 Append To List ${mac_list} ${words[1]} 142 END 143 144 [Return] ${mac_list} 145 146Get BMC Hostname 147 [Documentation] Get BMC hostname. 148 149 # Sample output of "hostname": 150 # test_hostname 151 152 ${output} ${stderr} ${rc}= BMC Execute Command hostname 153 154 [Return] ${output} 155 156Get FW_Env MAC Address 157 [Documentation] Get FW_Env MAC address. 158 159 # Sample output of "fw_printenv | grep ethaddr" 160 # ethaddr=xx:xx:xx:xx:xx:xx:xx 161 162 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 163 ... /sbin/fw_printenv | grep ethaddr 164 165 # Split the line and return MAC address. 166 # Split list data: 167 # ethaddr | xx:xx:xx:xx:xx:xx:xx 168 169 @{words}= Split String ${cmd_output} = 170 171 [Return] ${words[1]} 172 173 174Get List Of IP Address Via REST 175 [Documentation] Get list of IP address via REST. 176 [Arguments] @{ip_uri_list} 177 178 # Description of argument(s): 179 # ip_uri_list List of IP objects. 180 # Example: 181 # "data": [ 182 # "/xyz/openbmc_project/network/eth0/ipv4/e9767624", 183 # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b" 184 # ], 185 186 ${ip_list}= Create List 187 188 FOR ${ip_uri} IN @{ip_uri_list} 189 ${ip_addr}= Read Attribute ${ip_uri} Address 190 Append To List ${ip_list} ${ip_addr} 191 END 192 193 [Return] @{ip_list} 194 195Delete IP And Object 196 [Documentation] Delete IP and object. 197 [Arguments] ${ip_addr} @{ip_uri_list} 198 199 # Description of argument(s): 200 # ip_addr IP address to be deleted. 201 # ip_uri_list List of IP object URIs. 202 203 # Find IP object having this IP address. 204 205 FOR ${ip_uri} IN @{ip_uri_list} 206 ${ip_addr1}= Read Attribute ${ip_uri} Address 207 Run Keyword If '${ip_addr}' == '${ip_addr1}' Exit For Loop 208 END 209 210 # If the given IP address is not configured, return. 211 # Otherwise, delete the IP and object. 212 213 Run Keyword And Return If '${ip_addr}' != '${ip_addr1}' 214 ... Pass Execution IP address to be deleted is not configured. 215 216 Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri} 217 218 # After any modification on network interface, BMC restarts network 219 # module, wait until it is reachable. Then wait 15 seconds for new 220 # configuration to be updated on BMC. 221 222 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 223 ... ${NETWORK_RETRY_TIME} 224 Sleep 15s 225 226 # Verify whether deleted IP address is removed from BMC system. 227 228 ${ip_data}= Get BMC IP Info 229 Should Not Contain Match ${ip_data} ${ip_addr}* 230 ... msg=IP address not deleted. 231 232Get First Non Pingable IP From Subnet 233 [Documentation] Find first non-pingable IP from the subnet and return it. 234 [Arguments] ${host}=${OPENBMC_HOST} 235 236 # Description of argument(s): 237 # host Any valid host name or IP address 238 # (e.g. "machine1" or "9.xx.xx.31"). 239 240 # Non-pingable IP is unused IP address in the subnet. 241 ${host_name} ${ip_addr}= Get Host Name IP ${host} 242 243 # Split IP address into network part and host part. 244 # IP address will have 4 octets xx.xx.xx.xx. 245 # Sample output after split: 246 # split_ip [xx.xx.xx, xx] 247 248 ${split_ip}= Split String From Right ${ip_addr} . 1 249 # First element in list is Network part. 250 ${network_part}= Get From List ${split_ip} 0 251 252 FOR ${octet4} IN RANGE 1 255 253 ${new_ip}= Catenate ${network_part}.${octet4} 254 ${status}= Run Keyword And Return Status Ping Host ${new_ip} 255 # If IP is non-pingable, return it. 256 Return From Keyword If '${status}' == 'False' ${new_ip} 257 END 258 259 Fail msg=No non-pingable IP could be found in subnet ${network_part}. 260 261 262Validate MAC On BMC 263 [Documentation] Validate MAC on BMC. 264 [Arguments] ${mac_addr} 265 266 # Description of argument(s): 267 # mac_addr MAC address of the BMC. 268 269 ${system_mac}= Get BMC MAC Address 270 ${mac_new_addr}= Truncate MAC Address ${system_mac} ${mac_addr} 271 272 ${status}= Compare MAC Address ${system_mac} ${mac_new_addr} 273 Should Be True ${status} 274 ... msg=MAC address ${system_mac} does not match ${mac_new_addr}. 275 276Validate MAC On FW_Env 277 [Documentation] Validate MAC on FW_Env. 278 [Arguments] ${mac_addr} 279 280 # Description of argument(s): 281 # mac_addr MAC address of the BMC. 282 283 ${fw_env_addr}= Get FW_Env MAC Address 284 ${mac_new_addr}= Truncate MAC Address ${fw_env_addr} ${mac_addr} 285 286 ${status}= Compare MAC Address ${fw_env_addr} ${mac_new_addr} 287 Should Be True ${status} 288 ... msg=MAC address ${fw_env_addr} does not match ${mac_new_addr}. 289 290Truncate MAC Address 291 [Documentation] Truncates and returns user provided MAC address. 292 [Arguments] ${sys_mac_addr} ${user_mac_addr} 293 294 # Description of argument(s): 295 # sys_mac_addr MAC address of the BMC. 296 # user_mac_addr user provided MAC address. 297 298 ${mac_byte}= Set Variable ${0} 299 @{user_mac_list}= Split String ${user_mac_addr} : 300 @{sys_mac_list}= Split String ${sys_mac_addr} : 301 ${user_new_mac_list} Create List 302 303 # Truncate extra bytes and bits from MAC address 304 FOR ${mac_item} IN @{sys_mac_list} 305 ${invalid_mac_byte} = Get Regexp Matches ${user_mac_list}[${mac_byte}] [^A-Za-z0-9]+ 306 Return From Keyword If ${invalid_mac_byte} ${user_mac_addr} 307 ${mac_int} = Convert To Integer ${user_mac_list}[${mac_byte}] 16 308 ${user_mac_len} = Get Length ${user_mac_list} 309 ${user_mac_byte}= Run Keyword IF 310 ... ${mac_int} >= ${256} Truncate MAC Bits ${user_mac_list}[${mac_byte}] 311 ... ELSE Set Variable ${user_mac_list}[${mac_byte}] 312 313 Append To List ${user_new_mac_list} ${user_mac_byte} 314 ${mac_byte} = Set Variable ${mac_byte + 1} 315 Exit For Loop If '${mac_byte}' == '${user_mac_len}' 316 317 END 318 ${user_new_mac_string}= Evaluate ":".join(${user_new_mac_list}) 319 [Return] ${user_new_mac_string} 320 321Truncate MAC Bits 322 [Documentation] Truncates user provided MAC address byte to bits. 323 [Arguments] ${user_mac_addr_byte} 324 325 # Description of argument(s): 326 # user_mac_addr_byte user provided MAC address byte to truncate bits 327 328 ${user_mac_addr_int}= Convert To List ${user_mac_addr_byte} 329 ${user_mac_addr_byte}= Get Slice From List ${user_mac_addr_int} 0 2 330 ${user_mac_addr_byte_string}= Evaluate "".join(${user_mac_addr_byte}) 331 [Return] ${user_mac_addr_byte_string} 332 333 334Run Build Net 335 [Documentation] Run build_net to preconfigure the ethernet interfaces. 336 337 OS Execute Command build_net help y y 338 # Run pingum to check if the "build_net" was run correctly done. 339 ${output} ${stderr} ${rc}= OS Execute Command pingum 340 Should Contain ${output} All networks ping Ok 341 342 343Configure Hostname 344 [Documentation] Configure hostname on BMC via Redfish. 345 [Arguments] ${hostname} 346 347 # Description of argument(s): 348 # hostname A hostname value which is to be configured on BMC. 349 350 ${active_channel_config}= Get Active Channel Config 351 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 352 353 ${data}= Create Dictionary HostName=${hostname} 354 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 355 ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] 356 357 358Verify IP On BMC 359 [Documentation] Verify IP on BMC. 360 [Arguments] ${ip} 361 362 # Description of argument(s): 363 # ip IP address to be verified (e.g. "10.7.7.7"). 364 365 # Get IP address details on BMC using IP command. 366 @{ip_data}= Get BMC IP Info 367 Should Contain Match ${ip_data} ${ip}/* 368 ... msg=IP address does not exist. 369 370 371Verify Gateway On BMC 372 [Documentation] Verify gateway on BMC. 373 [Arguments] ${gateway_ip}=0.0.0.0 374 375 # Description of argument(s): 376 # gateway_ip Gateway IP address. 377 378 ${route_info}= Get BMC Route Info 379 380 # If gateway IP is empty or 0.0.0.0 it will not have route entry. 381 382 Run Keyword If '${gateway_ip}' == '0.0.0.0' 383 ... Pass Execution Gateway IP is "0.0.0.0". 384 ... ELSE 385 ... Should Contain ${route_info} ${gateway_ip} 386 ... msg=Gateway IP address not matching. 387 388 389Get BMC DNS Info 390 [Documentation] Get system DNS info. 391 392 393 # Sample output of "resolv.conf": 394 # ### Generated manually via dbus settings ### 395 # nameserver 8.8.8.8 396 397 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 398 ... cat /etc/resolv.conf 399 400 [Return] ${cmd_output} 401 402 403CLI Get Nameservers 404 [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list. 405 406 # Example of /etc/resolv.conf data: 407 # nameserver x.x.x.x 408 # nameserver y.y.y.y 409 410 ${stdout} ${stderr} ${rc}= BMC Execute Command egrep nameserver /etc/resolv.conf | cut -f2- -d ' ' 411 ${nameservers}= Split String ${stdout} 412 413 [Return] ${nameservers} 414 415 416Get Network Configuration 417 [Documentation] Get network configuration. 418 # Sample output: 419 #{ 420 # "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface", 421 # "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0", 422 # "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface", 423 # "Description": "Management Network Interface", 424 # "IPv4Addresses": [ 425 # { 426 # "Address": "169.254.xx.xx", 427 # "AddressOrigin": "IPv4LinkLocal", 428 # "Gateway": "0.0.0.0", 429 # "SubnetMask": "255.255.0.0" 430 # }, 431 # { 432 # "Address": "xx.xx.xx.xx", 433 # "AddressOrigin": "Static", 434 # "Gateway": "xx.xx.xx.1", 435 # "SubnetMask": "xx.xx.xx.xx" 436 # } 437 # ], 438 # "Id": "eth0", 439 # "MACAddress": "xx:xx:xx:xx:xx:xx", 440 # "Name": "Manager Ethernet Interface", 441 # "SpeedMbps": 0, 442 # "VLAN": { 443 # "VLANEnable": false, 444 # "VLANId": 0 445 # } 446 [Arguments] ${network_active_channel}=${CHANNEL_NUMBER} 447 448 # Description of argument(s): 449 # network_active_channel Ethernet channel number (eg. 1 or 2) 450 451 ${active_channel_config}= Get Active Channel Config 452 ${resp}= Redfish.Get 453 ... ${REDFISH_NW_ETH_IFACE}${active_channel_config['${network_active_channel}']['name']} 454 455 @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses 456 [Return] @{network_configurations} 457 458 459Add IP Address 460 [Documentation] Add IP Address To BMC. 461 [Arguments] ${ip} ${subnet_mask} ${gateway} 462 ... ${valid_status_codes}=${HTTP_OK} 463 464 # Description of argument(s): 465 # ip IP address to be added (e.g. "10.7.7.7"). 466 # subnet_mask Subnet mask for the IP to be added 467 # (e.g. "255.255.0.0"). 468 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 469 # valid_status_codes Expected return code from patch operation 470 # (e.g. "200"). See prolog of rest_request 471 # method in redfish_plus.py for details. 472 473 ${empty_dict}= Create Dictionary 474 ${ip_data}= Create Dictionary Address=${ip} 475 ... SubnetMask=${subnet_mask} Gateway=${gateway} 476 477 ${patch_list}= Create List 478 ${network_configurations}= Get Network Configuration 479 ${num_entries}= Get Length ${network_configurations} 480 481 FOR ${INDEX} IN RANGE 0 ${num_entries} 482 Append To List ${patch_list} ${empty_dict} 483 END 484 485 ${valid_status_codes}= Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 486 ... Set Variable ${HTTP_OK},${HTTP_NO_CONTENT} 487 ... ELSE Set Variable ${valid_status_codes} 488 489 # We need not check for existence of IP on BMC while adding. 490 Append To List ${patch_list} ${ip_data} 491 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 492 493 ${active_channel_config}= Get Active Channel Config 494 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 495 496 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 497 ... valid_status_codes=[${valid_status_codes}] 498 499 Return From Keyword If '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' 500 501 # Note: Network restart takes around 15-18s after patch request processing. 502 Sleep ${NETWORK_TIMEOUT}s 503 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 504 505 Verify IP On BMC ${ip} 506 Validate Network Config On BMC 507 508 509Delete IP Address 510 [Documentation] Delete IP Address Of BMC. 511 [Arguments] ${ip} ${valid_status_codes}=${HTTP_OK} 512 513 # Description of argument(s): 514 # ip IP address to be deleted (e.g. "10.7.7.7"). 515 # valid_status_codes Expected return code from patch operation 516 # (e.g. "200"). See prolog of rest_request 517 # method in redfish_plus.py for details. 518 519 ${empty_dict}= Create Dictionary 520 ${patch_list}= Create List 521 522 @{network_configurations}= Get Network Configuration 523 FOR ${network_configuration} IN @{network_configurations} 524 Run Keyword If '${network_configuration['Address']}' == '${ip}' 525 ... Append To List ${patch_list} ${null} 526 ... ELSE Append To List ${patch_list} ${empty_dict} 527 END 528 529 ${ip_found}= Run Keyword And Return Status List Should Contain Value 530 ... ${patch_list} ${null} msg=${ip} does not exist on BMC 531 Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC 532 533 # Run patch command only if given IP is found on BMC 534 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 535 536 ${active_channel_config}= Get Active Channel Config 537 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 538 539 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 540 ... valid_status_codes=[${valid_status_codes}] 541 542 # Note: Network restart takes around 15-18s after patch request processing 543 Sleep ${NETWORK_TIMEOUT}s 544 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 545 546 ${delete_status}= Run Keyword And Return Status Verify IP On BMC ${ip} 547 Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 548 ... Should Be True '${delete_status}' == '${False}' 549 ... ELSE Should Be True '${delete_status}' == '${True}' 550 551 Validate Network Config On BMC 552 553 554Validate Network Config On BMC 555 [Documentation] Check that network info obtained via redfish matches info 556 ... obtained via CLI. 557 558 @{network_configurations}= Get Network Configuration 559 ${ip_data}= Get BMC IP Info 560 FOR ${network_configuration} IN @{network_configurations} 561 Should Contain Match ${ip_data} ${network_configuration['Address']}/* 562 ... msg=IP address does not exist. 563 END 564 565 566Create VLAN 567 [Documentation] Create a VLAN. 568 [Arguments] ${id} ${interface}=eth0 ${expected_result}=valid 569 570 # Description of argument(s): 571 # id The VLAN ID (e.g. '53'). 572 # interface The physical interface for the VLAN(e.g. 'eth0'). 573 # expected_result Expected status of VLAN configuration. 574 575 @{data_vlan_id}= Create List ${interface} ${id} 576 ${data}= Create Dictionary data=@{data_vlan_id} 577 ${resp}= OpenBMC Post Request ${vlan_resource} data=${data} 578 ${resp.status_code}= Convert To String ${resp.status_code} 579 ${status}= Run Keyword And Return Status 580 ... Valid Value resp.status_code ["${HTTP_OK}"] 581 582 Run Keyword If '${expected_result}' == 'error' 583 ... Should Be Equal ${status} ${False} 584 ... msg=Configuration of an invalid VLAN ID Failed. 585 ... ELSE 586 ... Should Be Equal ${status} ${True} 587 ... msg=Configuration of a valid VLAN ID Failed. 588 589 Sleep ${NETWORK_TIMEOUT}s 590 591 592Configure Network Settings On VLAN 593 [Documentation] Configure network settings. 594 [Arguments] ${id} ${ip_addr} ${prefix_len} ${gateway_ip}=${gateway} 595 ... ${expected_result}=valid ${interface}=eth0 596 597 # Description of argument(s): 598 # id The VLAN ID (e.g. '53'). 599 # ip_addr IP address of VLAN Interface. 600 # prefix_len Prefix length of VLAN Interface. 601 # gateway_ip Gateway IP address of VLAN Interface. 602 # expected_result Expected status of network setting configuration. 603 # interface Physical Interface on which the VLAN is defined. 604 605 @{ip_parm_list}= Create List ${network_resource} 606 ... ${ip_addr} ${prefix_len} ${gateway_ip} 607 608 ${data}= Create Dictionary data=@{ip_parm_list} 609 610 Run Keyword And Ignore Error OpenBMC Post Request 611 ... ${NETWORK_MANAGER}${interface}_${id}/action/IP data=${data} 612 613 # After any modification on network interface, BMC restarts network 614 # module, wait until it is reachable. Then wait 15 seconds for new 615 # configuration to be updated on BMC. 616 617 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 618 ... ${NETWORK_RETRY_TIME} 619 Sleep ${NETWORK_TIMEOUT}s 620 621 # Verify whether new IP address is populated on BMC system. 622 # It should not allow to configure invalid settings. 623 ${status}= Run Keyword And Return Status 624 ... Verify IP On BMC ${ip_addr} 625 626 Run Keyword If '${expected_result}' == 'error' 627 ... Should Be Equal ${status} ${False} 628 ... msg=Configuration of invalid IP Failed. 629 ... ELSE 630 ... Should Be Equal ${status} ${True} 631 ... msg=Configuration of valid IP Failed. 632 633 634Get BMC Default Gateway 635 [Documentation] Get system default gateway. 636 637 ${route_info}= Get BMC Route Info 638 639 ${lines}= Get Lines Containing String ${route_info} default via 640 @{gateway_list}= Split To Lines ${lines} 641 642 # Extract first default gateway and return. 643 @{default_gw}= Split String ${gateway_list[0]} 644 645 [Return] ${default_gw[2]} 646 647 648Validate Hostname On BMC 649 [Documentation] Verify that the hostname read via Redfish is the same as the 650 ... hostname configured on system. 651 [Arguments] ${hostname} 652 653 # Description of argument(s): 654 # hostname A hostname value which is to be compared to the hostname 655 # configured on system. 656 657 ${sys_hostname}= Get BMC Hostname 658 Should Be Equal ${sys_hostname} ${hostname} 659 ... ignore_case=True msg=Hostname does not exist. 660