1*** Settings *** 2Resource ../lib/utils.robot 3Resource ../lib/connection_client.robot 4Resource ../lib/boot_utils.robot 5Library ../lib/gen_misc.py 6Library ../lib/utils.py 7Library ../lib/bmc_network_utils.py 8 9*** Variables *** 10# MAC input from user. 11${MAC_ADDRESS} ${EMPTY} 12 13 14*** Keywords *** 15 16Check And Reset MAC 17 [Documentation] Update BMC with user input MAC address. 18 [Arguments] ${mac_address}=${MAC_ADDRESS} 19 20 # Description of argument(s): 21 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 22 23 ${active_channel_config}= Get Active Channel Config 24 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 25 26 Should Not Be Empty ${mac_address} 27 Open Connection And Log In 28 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 29 ... cat /sys/class/net/${ethernet_interface}/address 30 Run Keyword If '${mac_address.lower()}' != '${bmc_mac_addr.lower()}' 31 ... Set MAC Address 32 33 34Set MAC Address 35 [Documentation] Update eth0 with input MAC address. 36 [Arguments] ${mac_address}=${MAC_ADDRESS} 37 38 # Description of argument(s): 39 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 40 41 ${active_channel_config}= Get Active Channel Config 42 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 43 44 Write fw_setenv ethaddr ${mac_address} 45 OBMC Reboot (off) 46 47 # Take SSH session post BMC reboot. 48 Open Connection And Log In 49 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 50 ... cat /sys/class/net/${ethernet_interface}/address 51 Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True 52 53 54Get BMC IP Info 55 [Documentation] Get system IP address and prefix length. 56 57 58 # Get system IP address and prefix length details using "ip addr" 59 # Sample Output of "ip addr": 60 # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000 61 # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff 62 # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0 63 64 ${active_channel_config}= Get Active Channel Config 65 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 66 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 67 ... /sbin/ip addr | grep ${ethernet_interface} 68 69 # Get line having IP address details. 70 ${lines}= Get Lines Containing String ${cmd_output} inet 71 72 # List IP address details. 73 @{ip_components}= Split To Lines ${lines} 74 75 @{ip_data}= Create List 76 77 # Get all IP addresses and prefix lengths on system. 78 FOR ${ip_component} IN @{ip_components} 79 @{if_info}= Split String ${ip_component} 80 ${ip_n_prefix}= Get From List ${if_info} 1 81 Append To List ${ip_data} ${ip_n_prefix} 82 END 83 84 [Return] ${ip_data} 85 86Get BMC Route Info 87 [Documentation] Get system route info. 88 89 90 # Sample output of "ip route": 91 # default via xx.xx.xx.x dev eth0 92 # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx 93 # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx 94 95 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 96 ... /sbin/ip route 97 98 [Return] ${cmd_output} 99 100# TODO: openbmc/openbmc-test-automation#1331 101Get BMC MAC Address 102 [Documentation] Get system MAC address. 103 104 105 # Sample output of "ip addr | grep ether": 106 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 107 108 ${active_channel_config}= Get Active Channel Config 109 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 110 111 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 112 ... /sbin/ip addr | grep ${ethernet_interface} -A 1 | grep ether 113 114 # Split the line and return MAC address. 115 # Split list data: 116 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 117 118 @{words}= Split String ${cmd_output} 119 120 [Return] ${words[1]} 121 122 123Get BMC MAC Address List 124 [Documentation] Get system MAC address 125 126 # Sample output of "ip addr | grep ether": 127 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 128 129 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 130 ... /sbin/ip addr | grep ether 131 132 # Split the line and return MAC address. 133 # Split list data: 134 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 135 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 136 137 ${mac_list}= Create List 138 @{lines}= Split To Lines ${cmd_output} 139 FOR ${line} IN @{lines} 140 @{words}= Split String ${line} 141 Append To List ${mac_list} ${words[1]} 142 END 143 144 [Return] ${mac_list} 145 146Get BMC Hostname 147 [Documentation] Get BMC hostname. 148 149 # Sample output of "hostname": 150 # test_hostname 151 152 ${output} ${stderr} ${rc}= BMC Execute Command hostname 153 154 [Return] ${output} 155 156Get FW_Env MAC Address 157 [Documentation] Get FW_Env MAC address. 158 159 # Sample output of "fw_printenv | grep ethaddr" 160 # ethaddr=xx:xx:xx:xx:xx:xx:xx 161 162 ${active_channel_config}= Get Active Channel Config 163 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 164 165 ${ethernet_interface}= Set Variable If 166 ... "${ethernet_interface}"=="eth0" ethaddr eth1addr 167 168 ${cmd_output} ${stderr} ${rc}= BMC Execute Command /sbin/fw_printenv | grep ${ethernet_interface} 169 170 # Split the line and return MAC address. 171 # Split list data: 172 # ethaddr | xx:xx:xx:xx:xx:xx:xx 173 174 @{words}= Split String ${cmd_output} = 175 176 [Return] ${words[1]} 177 178 179Get List Of IP Address Via REST 180 [Documentation] Get list of IP address via REST. 181 [Arguments] @{ip_uri_list} 182 183 # Description of argument(s): 184 # ip_uri_list List of IP objects. 185 # Example: 186 # "data": [ 187 # "/xyz/openbmc_project/network/eth0/ipv4/e9767624", 188 # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b" 189 # ], 190 191 ${ip_list}= Create List 192 193 FOR ${ip_uri} IN @{ip_uri_list} 194 ${ip_addr}= Read Attribute ${ip_uri} Address 195 Append To List ${ip_list} ${ip_addr} 196 END 197 198 [Return] @{ip_list} 199 200Delete IP And Object 201 [Documentation] Delete IP and object. 202 [Arguments] ${ip_addr} @{ip_uri_list} 203 204 # Description of argument(s): 205 # ip_addr IP address to be deleted. 206 # ip_uri_list List of IP object URIs. 207 208 # Find IP object having this IP address. 209 210 FOR ${ip_uri} IN @{ip_uri_list} 211 ${ip_addr1}= Read Attribute ${ip_uri} Address 212 Run Keyword If '${ip_addr}' == '${ip_addr1}' Exit For Loop 213 END 214 215 # If the given IP address is not configured, return. 216 # Otherwise, delete the IP and object. 217 218 Run Keyword And Return If '${ip_addr}' != '${ip_addr1}' 219 ... Pass Execution IP address to be deleted is not configured. 220 221 Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri} 222 223 # After any modification on network interface, BMC restarts network 224 # module, wait until it is reachable. Then wait 15 seconds for new 225 # configuration to be updated on BMC. 226 227 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 228 ... ${NETWORK_RETRY_TIME} 229 Sleep 15s 230 231 # Verify whether deleted IP address is removed from BMC system. 232 233 ${ip_data}= Get BMC IP Info 234 Should Not Contain Match ${ip_data} ${ip_addr}* 235 ... msg=IP address not deleted. 236 237Get First Non Pingable IP From Subnet 238 [Documentation] Find first non-pingable IP from the subnet and return it. 239 [Arguments] ${host}=${OPENBMC_HOST} 240 241 # Description of argument(s): 242 # host Any valid host name or IP address 243 # (e.g. "machine1" or "9.xx.xx.31"). 244 245 # Non-pingable IP is unused IP address in the subnet. 246 ${host_name} ${ip_addr}= Get Host Name IP ${host} 247 248 # Split IP address into network part and host part. 249 # IP address will have 4 octets xx.xx.xx.xx. 250 # Sample output after split: 251 # split_ip [xx.xx.xx, xx] 252 253 ${split_ip}= Split String From Right ${ip_addr} . 1 254 # First element in list is Network part. 255 ${network_part}= Get From List ${split_ip} 0 256 257 FOR ${octet4} IN RANGE 1 255 258 ${new_ip}= Catenate ${network_part}.${octet4} 259 ${status}= Run Keyword And Return Status Ping Host ${new_ip} 260 # If IP is non-pingable, return it. 261 Return From Keyword If '${status}' == 'False' ${new_ip} 262 END 263 264 Fail msg=No non-pingable IP could be found in subnet ${network_part}. 265 266 267Validate MAC On BMC 268 [Documentation] Validate MAC on BMC. 269 [Arguments] ${mac_addr} 270 271 # Description of argument(s): 272 # mac_addr MAC address of the BMC. 273 274 ${system_mac}= Get BMC MAC Address 275 ${mac_new_addr}= Truncate MAC Address ${system_mac} ${mac_addr} 276 277 ${status}= Compare MAC Address ${system_mac} ${mac_new_addr} 278 Should Be True ${status} 279 ... msg=MAC address ${system_mac} does not match ${mac_new_addr}. 280 281Validate MAC On FW_Env 282 [Documentation] Validate MAC on FW_Env. 283 [Arguments] ${mac_addr} 284 285 # Description of argument(s): 286 # mac_addr MAC address of the BMC. 287 288 ${fw_env_addr}= Get FW_Env MAC Address 289 ${mac_new_addr}= Truncate MAC Address ${fw_env_addr} ${mac_addr} 290 291 ${status}= Compare MAC Address ${fw_env_addr} ${mac_new_addr} 292 Should Be True ${status} 293 ... msg=MAC address ${fw_env_addr} does not match ${mac_new_addr}. 294 295Truncate MAC Address 296 [Documentation] Truncates and returns user provided MAC address. 297 [Arguments] ${sys_mac_addr} ${user_mac_addr} 298 299 # Description of argument(s): 300 # sys_mac_addr MAC address of the BMC. 301 # user_mac_addr user provided MAC address. 302 303 ${mac_byte}= Set Variable ${0} 304 @{user_mac_list}= Split String ${user_mac_addr} : 305 @{sys_mac_list}= Split String ${sys_mac_addr} : 306 ${user_new_mac_list} Create List 307 308 # Truncate extra bytes and bits from MAC address 309 FOR ${mac_item} IN @{sys_mac_list} 310 ${invalid_mac_byte} = Get Regexp Matches ${user_mac_list}[${mac_byte}] [^A-Za-z0-9]+ 311 Return From Keyword If ${invalid_mac_byte} ${user_mac_addr} 312 ${mac_int} = Convert To Integer ${user_mac_list}[${mac_byte}] 16 313 ${user_mac_len} = Get Length ${user_mac_list} 314 ${user_mac_byte}= Run Keyword IF 315 ... ${mac_int} >= ${256} Truncate MAC Bits ${user_mac_list}[${mac_byte}] 316 ... ELSE Set Variable ${user_mac_list}[${mac_byte}] 317 318 Append To List ${user_new_mac_list} ${user_mac_byte} 319 ${mac_byte} = Set Variable ${mac_byte + 1} 320 Exit For Loop If '${mac_byte}' == '${user_mac_len}' 321 322 END 323 ${user_new_mac_string}= Evaluate ":".join(${user_new_mac_list}) 324 [Return] ${user_new_mac_string} 325 326Truncate MAC Bits 327 [Documentation] Truncates user provided MAC address byte to bits. 328 [Arguments] ${user_mac_addr_byte} 329 330 # Description of argument(s): 331 # user_mac_addr_byte user provided MAC address byte to truncate bits 332 333 ${user_mac_addr_int}= Convert To List ${user_mac_addr_byte} 334 ${user_mac_addr_byte}= Get Slice From List ${user_mac_addr_int} 0 2 335 ${user_mac_addr_byte_string}= Evaluate "".join(${user_mac_addr_byte}) 336 [Return] ${user_mac_addr_byte_string} 337 338 339Run Build Net 340 [Documentation] Run build_net to preconfigure the ethernet interfaces. 341 342 OS Execute Command build_net help y y 343 # Run pingum to check if the "build_net" was run correctly done. 344 ${output} ${stderr} ${rc}= OS Execute Command pingum 345 Should Contain ${output} All networks ping Ok 346 347 348Configure Hostname 349 [Documentation] Configure hostname on BMC via Redfish. 350 [Arguments] ${hostname} 351 352 # Description of argument(s): 353 # hostname A hostname value which is to be configured on BMC. 354 355 ${active_channel_config}= Get Active Channel Config 356 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 357 358 ${data}= Create Dictionary HostName=${hostname} 359 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 360 ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] 361 362 363Verify IP On BMC 364 [Documentation] Verify IP on BMC. 365 [Arguments] ${ip} 366 367 # Description of argument(s): 368 # ip IP address to be verified (e.g. "10.7.7.7"). 369 370 # Get IP address details on BMC using IP command. 371 @{ip_data}= Get BMC IP Info 372 Should Contain Match ${ip_data} ${ip}/* 373 ... msg=IP address does not exist. 374 375 376Verify Gateway On BMC 377 [Documentation] Verify gateway on BMC. 378 [Arguments] ${gateway_ip}=0.0.0.0 379 380 # Description of argument(s): 381 # gateway_ip Gateway IP address. 382 383 ${route_info}= Get BMC Route Info 384 385 # If gateway IP is empty or 0.0.0.0 it will not have route entry. 386 387 Run Keyword If '${gateway_ip}' == '0.0.0.0' 388 ... Pass Execution Gateway IP is "0.0.0.0". 389 ... ELSE 390 ... Should Contain ${route_info} ${gateway_ip} 391 ... msg=Gateway IP address not matching. 392 393 394Get BMC DNS Info 395 [Documentation] Get system DNS info. 396 397 398 # Sample output of "resolv.conf": 399 # ### Generated manually via dbus settings ### 400 # nameserver 8.8.8.8 401 402 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 403 ... cat /etc/resolv.conf 404 405 [Return] ${cmd_output} 406 407 408CLI Get Nameservers 409 [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list. 410 411 # Example of /etc/resolv.conf data: 412 # nameserver x.x.x.x 413 # nameserver y.y.y.y 414 415 ${stdout} ${stderr} ${rc}= BMC Execute Command egrep nameserver /etc/resolv.conf | cut -f2- -d ' ' 416 ${nameservers}= Split String ${stdout} 417 418 [Return] ${nameservers} 419 420 421Get Network Configuration 422 [Documentation] Get network configuration. 423 # Sample output: 424 #{ 425 # "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface", 426 # "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0", 427 # "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface", 428 # "Description": "Management Network Interface", 429 # "IPv4Addresses": [ 430 # { 431 # "Address": "169.254.xx.xx", 432 # "AddressOrigin": "IPv4LinkLocal", 433 # "Gateway": "0.0.0.0", 434 # "SubnetMask": "255.255.0.0" 435 # }, 436 # { 437 # "Address": "xx.xx.xx.xx", 438 # "AddressOrigin": "Static", 439 # "Gateway": "xx.xx.xx.1", 440 # "SubnetMask": "xx.xx.xx.xx" 441 # } 442 # ], 443 # "Id": "eth0", 444 # "MACAddress": "xx:xx:xx:xx:xx:xx", 445 # "Name": "Manager Ethernet Interface", 446 # "SpeedMbps": 0, 447 # "VLAN": { 448 # "VLANEnable": false, 449 # "VLANId": 0 450 # } 451 [Arguments] ${network_active_channel}=${CHANNEL_NUMBER} 452 453 # Description of argument(s): 454 # network_active_channel Ethernet channel number (eg. 1 or 2) 455 456 ${active_channel_config}= Get Active Channel Config 457 ${resp}= Redfish.Get 458 ... ${REDFISH_NW_ETH_IFACE}${active_channel_config['${network_active_channel}']['name']} 459 460 @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses 461 [Return] @{network_configurations} 462 463 464Add IP Address 465 [Documentation] Add IP Address To BMC. 466 [Arguments] ${ip} ${subnet_mask} ${gateway} 467 ... ${valid_status_codes}=${HTTP_OK} 468 469 # Description of argument(s): 470 # ip IP address to be added (e.g. "10.7.7.7"). 471 # subnet_mask Subnet mask for the IP to be added 472 # (e.g. "255.255.0.0"). 473 # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). 474 # valid_status_codes Expected return code from patch operation 475 # (e.g. "200"). See prolog of rest_request 476 # method in redfish_plus.py for details. 477 478 ${empty_dict}= Create Dictionary 479 ${ip_data}= Create Dictionary Address=${ip} 480 ... SubnetMask=${subnet_mask} Gateway=${gateway} 481 482 ${patch_list}= Create List 483 ${network_configurations}= Get Network Configuration 484 ${num_entries}= Get Length ${network_configurations} 485 486 FOR ${INDEX} IN RANGE 0 ${num_entries} 487 Append To List ${patch_list} ${empty_dict} 488 END 489 490 ${valid_status_codes}= Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 491 ... Set Variable ${HTTP_OK},${HTTP_NO_CONTENT} 492 ... ELSE Set Variable ${valid_status_codes} 493 494 # We need not check for existence of IP on BMC while adding. 495 Append To List ${patch_list} ${ip_data} 496 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 497 498 ${active_channel_config}= Get Active Channel Config 499 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 500 501 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 502 ... valid_status_codes=[${valid_status_codes}] 503 504 Return From Keyword If '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' 505 506 # Note: Network restart takes around 15-18s after patch request processing. 507 Sleep ${NETWORK_TIMEOUT}s 508 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 509 510 Verify IP On BMC ${ip} 511 Validate Network Config On BMC 512 513 514Delete IP Address 515 [Documentation] Delete IP Address Of BMC. 516 [Arguments] ${ip} ${valid_status_codes}=${HTTP_OK} 517 518 # Description of argument(s): 519 # ip IP address to be deleted (e.g. "10.7.7.7"). 520 # valid_status_codes Expected return code from patch operation 521 # (e.g. "200"). See prolog of rest_request 522 # method in redfish_plus.py for details. 523 524 ${empty_dict}= Create Dictionary 525 ${patch_list}= Create List 526 527 @{network_configurations}= Get Network Configuration 528 FOR ${network_configuration} IN @{network_configurations} 529 Run Keyword If '${network_configuration['Address']}' == '${ip}' 530 ... Append To List ${patch_list} ${null} 531 ... ELSE Append To List ${patch_list} ${empty_dict} 532 END 533 534 ${ip_found}= Run Keyword And Return Status List Should Contain Value 535 ... ${patch_list} ${null} msg=${ip} does not exist on BMC 536 Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC 537 538 # Run patch command only if given IP is found on BMC 539 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} 540 541 ${active_channel_config}= Get Active Channel Config 542 ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} 543 544 Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} 545 ... valid_status_codes=[${valid_status_codes}] 546 547 # Note: Network restart takes around 15-18s after patch request processing 548 Sleep ${NETWORK_TIMEOUT}s 549 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 550 551 ${delete_status}= Run Keyword And Return Status Verify IP On BMC ${ip} 552 Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' 553 ... Should Be True '${delete_status}' == '${False}' 554 ... ELSE Should Be True '${delete_status}' == '${True}' 555 556 Validate Network Config On BMC 557 558 559Validate Network Config On BMC 560 [Documentation] Check that network info obtained via redfish matches info 561 ... obtained via CLI. 562 563 @{network_configurations}= Get Network Configuration 564 ${ip_data}= Get BMC IP Info 565 FOR ${network_configuration} IN @{network_configurations} 566 Should Contain Match ${ip_data} ${network_configuration['Address']}/* 567 ... msg=IP address does not exist. 568 END 569 570 571Create VLAN 572 [Documentation] Create a VLAN. 573 [Arguments] ${id} ${interface}=eth0 ${expected_result}=valid 574 575 # Description of argument(s): 576 # id The VLAN ID (e.g. '53'). 577 # interface The physical interface for the VLAN(e.g. 'eth0'). 578 # expected_result Expected status of VLAN configuration. 579 580 @{data_vlan_id}= Create List ${interface} ${id} 581 ${data}= Create Dictionary data=@{data_vlan_id} 582 ${resp}= OpenBMC Post Request ${vlan_resource} data=${data} 583 ${resp.status_code}= Convert To String ${resp.status_code} 584 ${status}= Run Keyword And Return Status 585 ... Valid Value resp.status_code ["${HTTP_OK}"] 586 587 Run Keyword If '${expected_result}' == 'error' 588 ... Should Be Equal ${status} ${False} 589 ... msg=Configuration of an invalid VLAN ID Failed. 590 ... ELSE 591 ... Should Be Equal ${status} ${True} 592 ... msg=Configuration of a valid VLAN ID Failed. 593 594 Sleep ${NETWORK_TIMEOUT}s 595 596 597Configure Network Settings On VLAN 598 [Documentation] Configure network settings. 599 [Arguments] ${id} ${ip_addr} ${prefix_len} ${gateway_ip}=${gateway} 600 ... ${expected_result}=valid ${interface}=eth0 601 602 # Description of argument(s): 603 # id The VLAN ID (e.g. '53'). 604 # ip_addr IP address of VLAN Interface. 605 # prefix_len Prefix length of VLAN Interface. 606 # gateway_ip Gateway IP address of VLAN Interface. 607 # expected_result Expected status of network setting configuration. 608 # interface Physical Interface on which the VLAN is defined. 609 610 @{ip_parm_list}= Create List ${network_resource} 611 ... ${ip_addr} ${prefix_len} ${gateway_ip} 612 613 ${data}= Create Dictionary data=@{ip_parm_list} 614 615 Run Keyword And Ignore Error OpenBMC Post Request 616 ... ${NETWORK_MANAGER}${interface}_${id}/action/IP data=${data} 617 618 # After any modification on network interface, BMC restarts network 619 # module, wait until it is reachable. Then wait 15 seconds for new 620 # configuration to be updated on BMC. 621 622 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 623 ... ${NETWORK_RETRY_TIME} 624 Sleep ${NETWORK_TIMEOUT}s 625 626 # Verify whether new IP address is populated on BMC system. 627 # It should not allow to configure invalid settings. 628 ${status}= Run Keyword And Return Status 629 ... Verify IP On BMC ${ip_addr} 630 631 Run Keyword If '${expected_result}' == 'error' 632 ... Should Be Equal ${status} ${False} 633 ... msg=Configuration of invalid IP Failed. 634 ... ELSE 635 ... Should Be Equal ${status} ${True} 636 ... msg=Configuration of valid IP Failed. 637 638 639Get BMC Default Gateway 640 [Documentation] Get system default gateway. 641 642 ${route_info}= Get BMC Route Info 643 644 ${lines}= Get Lines Containing String ${route_info} default via 645 @{gateway_list}= Split To Lines ${lines} 646 647 # Extract first default gateway and return. 648 @{default_gw}= Split String ${gateway_list[0]} 649 650 [Return] ${default_gw[2]} 651 652 653Validate Hostname On BMC 654 [Documentation] Verify that the hostname read via Redfish is the same as the 655 ... hostname configured on system. 656 [Arguments] ${hostname} 657 658 # Description of argument(s): 659 # hostname A hostname value which is to be compared to the hostname 660 # configured on system. 661 662 ${sys_hostname}= Get BMC Hostname 663 Should Be Equal ${sys_hostname} ${hostname} 664 ... ignore_case=True msg=Hostname does not exist. 665 666Get Channel Number For All Interface 667 [Documentation] Gets the Interface name and returns the channel number for the given interface. 668 669 ${valid_channel_number_interface_names}= Get Channel Config 670 671 ${valid_channel_number_interface_names}= Convert To Dictionary ${valid_channel_number_interface_names} 672 673 [Return] ${valid_channel_number_interface_names} 674 675Get Valid Channel Number 676 [Documentation] Get Valid Channel Number. 677 [Arguments] ${valid_channel_number_interface_names} 678 679 #Description of argument(s): 680 #valid_channel_number_interface_names Contains channel names in dict. 681 682 &{valid_channel_number_interface_name}= Create Dictionary 683 684 FOR ${key} ${values} IN &{valid_channel_number_interface_names} 685 Run Keyword If '${values['is_valid']}' == 'True' 686 ... Set To Dictionary ${valid_channel_number_interface_name} ${key} ${values} 687 END 688 689 [Return] ${valid_channel_number_interface_name} 690 691Get Invalid Channel Number List 692 [Documentation] Get Invalid Channel and return as list. 693 694 ${available_channels}= Get Channel Number For All Interface 695 # Get the channel which medium_type as 'reserved' and append it to a list. 696 @{invalid_channel_number_list}= Create List 697 698 FOR ${channel_number} ${values} IN &{available_channels} 699 Run Keyword If '${values['channel_info']['medium_type']}' == 'reserved' 700 ... Append To List ${invalid_channel_number_list} ${channel_number} 701 END 702 703 [Return] ${invalid_channel_number_list} 704 705 706Get Channel Number For Valid Ethernet Interface 707 [Documentation] Get channel number for all ethernet interface. 708 [Arguments] ${valid_channel_number_interface_name} 709 710 # Description of argument(s): 711 # channel_number_list Contains channel names in list. 712 713 @{channel_number_list}= Create List 714 715 FOR ${channel_number} ${values} IN &{valid_channel_number_interface_name} 716 Run Keyword If '${values['channel_info']['medium_type']}' == 'lan-802.3' 717 ... Append To List ${channel_number_list} ${channel_number} 718 END 719 720 [Return] ${channel_number_list} 721 722 723Get Current Channel Name List 724 [Documentation] Get Current Channel name and append it to active channel list. 725 [Arguments] ${channel_list} ${channel_config_json} 726 727 # Description of Arguments 728 # ${channel_list} - list Contains all available active channels. 729 # ${channel_config_json} - output of /usr/share/ipmi-providers/channel_config.json file. 730 731 FOR ${channel_number} ${values} IN &{channel_config_json} 732 Run Keyword If '${values['name']}' == 'SELF' 733 ... Run Keyword Append To List ${channel_list} ${channel_number} 734 END 735 736 [Return] ${channel_list} 737 738 739Get Active Ethernet Channel List 740 [Documentation] Get Available channels from channel_config.json file and return as list. 741 [Arguments] ${current_channel}=${0} 742 743 ${valid_channel_number_interface_names}= Get Channel Number For All Interface 744 745 ${valid_channel_number_interface_name}= Get Valid Channel Number ${valid_channel_number_interface_names} 746 747 ${channel_number_list}= Get Channel Number For Valid Ethernet Interface 748 ... ${valid_channel_number_interface_name} 749 750 Return From Keyword If ${current_channel} == 0 ${channel_number_list} 751 ${channel_number_list}= Get Current Channel Name List 752 ... ${channel_number_list} ${valid_channel_number_interface_names} 753 754 [Return] ${channel_number_list} 755