1*** Settings ***
2Resource                ../lib/utils.robot
3Resource                ../lib/connection_client.robot
4Resource                ../lib/boot_utils.robot
5Library                 ../lib/gen_misc.py
6Library                 ../lib/utils.py
7Library                 ../lib/bmc_network_utils.py
8
9*** Variables ***
10# MAC input from user.
11${MAC_ADDRESS}          ${EMPTY}
12
13
14*** Keywords ***
15
16Check And Reset MAC
17    [Documentation]  Update BMC with user input MAC address.
18    [Arguments]  ${mac_address}=${MAC_ADDRESS}
19
20    # Description of argument(s):
21    # mac_address  The mac address (e.g. 00:01:6c:80:02:28).
22
23    ${active_channel_config}=  Get Active Channel Config
24    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
25
26    Should Not Be Empty  ${mac_address}
27    Open Connection And Log In
28    ${bmc_mac_addr}  ${stderr}  ${rc}=  BMC Execute Command
29    ...  cat /sys/class/net/${ethernet_interface}/address
30    Run Keyword If  '${mac_address.lower()}' != '${bmc_mac_addr.lower()}'
31    ...  Set MAC Address
32
33
34Set MAC Address
35    [Documentation]  Update eth0 with input MAC address.
36    [Arguments]  ${mac_address}=${MAC_ADDRESS}
37
38    # Description of argument(s):
39    # mac_address  The mac address (e.g. 00:01:6c:80:02:28).
40
41    ${active_channel_config}=  Get Active Channel Config
42    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
43
44    Write  fw_setenv ethaddr ${mac_address}
45    OBMC Reboot (off)
46
47    # Take SSH session post BMC reboot.
48    Open Connection And Log In
49    ${bmc_mac_addr}  ${stderr}  ${rc}=  BMC Execute Command
50    ...  cat /sys/class/net/${ethernet_interface}/address
51    Should Be Equal  ${bmc_mac_addr}  ${mac_address}  ignore_case=True
52
53
54Get BMC IP Info
55    [Documentation]  Get system IP address and prefix length.
56
57
58    # Get system IP address and prefix length details using "ip addr"
59    # Sample Output of "ip addr":
60    # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000
61    #     link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
62    #     inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0
63
64    ${active_channel_config}=  Get Active Channel Config
65    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
66    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
67    ...  /sbin/ip addr | grep ${ethernet_interface}
68
69    # Get line having IP address details.
70    ${lines}=  Get Lines Containing String  ${cmd_output}  inet
71
72    # List IP address details.
73    @{ip_components}=  Split To Lines  ${lines}
74
75    @{ip_data}=  Create List
76
77    # Get all IP addresses and prefix lengths on system.
78    FOR  ${ip_component}  IN  @{ip_components}
79      @{if_info}=  Split String  ${ip_component}
80      ${ip_n_prefix}=  Get From List  ${if_info}  1
81      Append To List  ${ip_data}  ${ip_n_prefix}
82    END
83
84    [Return]  ${ip_data}
85
86Get BMC Route Info
87    [Documentation]  Get system route info.
88
89
90    # Sample output of "ip route":
91    # default via xx.xx.xx.x dev eth0
92    # xx.xx.xx.0/23 dev eth0  src xx.xx.xx.xx
93    # xx.xx.xx.0/24 dev eth0  src xx.xx.xx.xx
94
95    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
96    ...  /sbin/ip route
97
98    [Return]  ${cmd_output}
99
100# TODO: openbmc/openbmc-test-automation#1331
101Get BMC MAC Address
102    [Documentation]  Get system MAC address.
103
104
105    # Sample output of "ip addr | grep ether":
106    # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
107
108    ${active_channel_config}=  Get Active Channel Config
109    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
110
111    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
112    ...  /sbin/ip addr | grep ${ethernet_interface} -A 1 | grep ether
113
114    # Split the line and return MAC address.
115    # Split list data:
116    # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
117
118    @{words}=  Split String  ${cmd_output}
119
120    [Return]  ${words[1]}
121
122
123Get BMC MAC Address List
124    [Documentation]  Get system MAC address
125
126    # Sample output of "ip addr | grep ether":
127    # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
128
129    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
130    ...  /sbin/ip addr | grep ether
131
132    # Split the line and return MAC address.
133    # Split list data:
134    # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
135    # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
136
137    ${mac_list}=  Create List
138    @{lines}=  Split To Lines  ${cmd_output}
139    FOR  ${line}  IN  @{lines}
140      @{words}=  Split String  ${line}
141      Append To List  ${mac_list}  ${words[1]}
142    END
143
144    [Return]  ${mac_list}
145
146Get BMC Hostname
147    [Documentation]  Get BMC hostname.
148
149    # Sample output of  "hostname":
150    # test_hostname
151
152    ${output}  ${stderr}  ${rc}=  BMC Execute Command  hostname
153
154    [Return]  ${output}
155
156Get FW_Env MAC Address
157    [Documentation]  Get FW_Env MAC address.
158
159    # Sample output of "fw_printenv | grep ethaddr"
160    # ethaddr=xx:xx:xx:xx:xx:xx:xx
161
162    ${active_channel_config}=  Get Active Channel Config
163    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
164
165    ${ethernet_interface}=  Set Variable If
166    ...  "${ethernet_interface}"=="eth0"  ethaddr  eth1addr
167
168    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command  /sbin/fw_printenv | grep ${ethernet_interface}
169
170    # Split the line and return MAC address.
171    # Split list data:
172    # ethaddr | xx:xx:xx:xx:xx:xx:xx
173
174    @{words}=  Split String  ${cmd_output}  =
175
176    [Return]  ${words[1]}
177
178
179Get List Of IP Address Via REST
180    [Documentation]  Get list of IP address via REST.
181    [Arguments]  @{ip_uri_list}
182
183    # Description of argument(s):
184    # ip_uri_list  List of IP objects.
185    # Example:
186    #   "data": [
187    #     "/xyz/openbmc_project/network/eth0/ipv4/e9767624",
188    #     "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b"
189    #   ],
190
191    ${ip_list}=  Create List
192
193    FOR  ${ip_uri}  IN  @{ip_uri_list}
194      ${ip_addr}=  Read Attribute  ${ip_uri}  Address
195      Append To List  ${ip_list}  ${ip_addr}
196    END
197
198    [Return]  @{ip_list}
199
200Delete IP And Object
201    [Documentation]  Delete IP and object.
202    [Arguments]  ${ip_addr}  @{ip_uri_list}
203
204    # Description of argument(s):
205    # ip_addr      IP address to be deleted.
206    # ip_uri_list  List of IP object URIs.
207
208    # Find IP object having this IP address.
209
210     FOR  ${ip_uri}  IN  @{ip_uri_list}
211       ${ip_addr1}=  Read Attribute  ${ip_uri}  Address
212       Run Keyword If  '${ip_addr}' == '${ip_addr1}'  Exit For Loop
213     END
214
215    # If the given IP address is not configured, return.
216    # Otherwise, delete the IP and object.
217
218    Run Keyword And Return If  '${ip_addr}' != '${ip_addr1}'
219    ...  Pass Execution  IP address to be deleted is not configured.
220
221    Run Keyword And Ignore Error  OpenBMC Delete Request  ${ip_uri}
222
223    # After any modification on network interface, BMC restarts network
224    # module, wait until it is reachable. Then wait 15 seconds for new
225    # configuration to be updated on BMC.
226
227    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
228    ...  ${NETWORK_RETRY_TIME}
229    Sleep  15s
230
231    # Verify whether deleted IP address is removed from BMC system.
232
233    ${ip_data}=  Get BMC IP Info
234    Should Not Contain Match  ${ip_data}  ${ip_addr}*
235    ...  msg=IP address not deleted.
236
237Get First Non Pingable IP From Subnet
238    [Documentation]  Find first non-pingable IP from the subnet and return it.
239    [Arguments]  ${host}=${OPENBMC_HOST}
240
241    # Description of argument(s):
242    # host  Any valid host name or IP address
243    #       (e.g. "machine1" or "9.xx.xx.31").
244
245    # Non-pingable IP is unused IP address in the subnet.
246    ${host_name}  ${ip_addr}=  Get Host Name IP  ${host}
247
248    # Split IP address into network part and host part.
249    # IP address will have 4 octets xx.xx.xx.xx.
250    # Sample output after split:
251    # split_ip  [xx.xx.xx, xx]
252
253    ${split_ip}=  Split String From Right  ${ip_addr}  .  1
254    # First element in list is Network part.
255    ${network_part}=  Get From List  ${split_ip}  0
256
257    FOR  ${octet4}  IN RANGE  1  255
258      ${new_ip}=  Catenate  ${network_part}.${octet4}
259      ${status}=  Run Keyword And Return Status  Ping Host  ${new_ip}
260      # If IP is non-pingable, return it.
261      Return From Keyword If  '${status}' == 'False'  ${new_ip}
262    END
263
264    Fail  msg=No non-pingable IP could be found in subnet ${network_part}.
265
266
267Validate MAC On BMC
268    [Documentation]  Validate MAC on BMC.
269    [Arguments]  ${mac_addr}
270
271    # Description of argument(s):
272    # mac_addr  MAC address of the BMC.
273
274    ${system_mac}=  Get BMC MAC Address
275    ${mac_new_addr}=  Truncate MAC Address  ${system_mac}  ${mac_addr}
276
277    ${status}=  Compare MAC Address  ${system_mac}  ${mac_new_addr}
278    Should Be True  ${status}
279    ...  msg=MAC address ${system_mac} does not match ${mac_new_addr}.
280
281Validate MAC On FW_Env
282    [Documentation]  Validate MAC on FW_Env.
283    [Arguments]  ${mac_addr}
284
285    # Description of argument(s):
286    # mac_addr  MAC address of the BMC.
287
288    ${fw_env_addr}=  Get FW_Env MAC Address
289    ${mac_new_addr}=  Truncate MAC Address  ${fw_env_addr}  ${mac_addr}
290
291    ${status}=  Compare MAC Address  ${fw_env_addr}  ${mac_new_addr}
292    Should Be True  ${status}
293    ...  msg=MAC address ${fw_env_addr} does not match ${mac_new_addr}.
294
295Truncate MAC Address
296    [Documentation]  Truncates and returns user provided MAC address.
297    [Arguments]    ${sys_mac_addr}  ${user_mac_addr}
298
299    # Description of argument(s):
300    # sys_mac_addr  MAC address of the BMC.
301    # user_mac_addr user provided MAC address.
302
303    ${mac_byte}=  Set Variable  ${0}
304    @{user_mac_list}=  Split String  ${user_mac_addr}  :
305    @{sys_mac_list}=  Split String  ${sys_mac_addr}  :
306    ${user_new_mac_list}  Create List
307
308    # Truncate extra bytes and bits from MAC address
309    FOR  ${mac_item}  IN  @{sys_mac_list}
310        ${invalid_mac_byte} =  Get Regexp Matches  ${user_mac_list}[${mac_byte}]  [^A-Za-z0-9]+
311        Return From Keyword If  ${invalid_mac_byte}  ${user_mac_addr}
312        ${mac_int} =    Convert To Integer      ${user_mac_list}[${mac_byte}]   16
313        ${user_mac_len} =  Get Length  ${user_mac_list}
314        ${user_mac_byte}=  Run Keyword IF
315        ...  ${mac_int} >= ${256}  Truncate MAC Bits  ${user_mac_list}[${mac_byte}]
316        ...  ELSE  Set Variable  ${user_mac_list}[${mac_byte}]
317
318        Append To List  ${user_new_mac_list}  ${user_mac_byte}
319        ${mac_byte} =    Set Variable    ${mac_byte + 1}
320        Exit For Loop If  '${mac_byte}' == '${user_mac_len}'
321
322    END
323    ${user_new_mac_string}=   Evaluate  ":".join(${user_new_mac_list})
324    [Return]  ${user_new_mac_string}
325
326Truncate MAC Bits
327    [Documentation]  Truncates user provided MAC address byte to bits.
328    [Arguments]    ${user_mac_addr_byte}
329
330    # Description of argument(s):
331    # user_mac_addr_byte user provided MAC address byte to truncate bits
332
333    ${user_mac_addr_int}=   Convert To List  ${user_mac_addr_byte}
334    ${user_mac_addr_byte}=  Get Slice From List  ${user_mac_addr_int}  0  2
335    ${user_mac_addr_byte_string}=  Evaluate  "".join(${user_mac_addr_byte})
336    [Return]  ${user_mac_addr_byte_string}
337
338
339Run Build Net
340    [Documentation]  Run build_net to preconfigure the ethernet interfaces.
341
342    OS Execute Command  build_net help y y
343    # Run pingum to check if the "build_net" was run correctly done.
344    ${output}  ${stderr}  ${rc}=  OS Execute Command  pingum
345    Should Contain  ${output}  All networks ping Ok
346
347
348Configure Hostname
349    [Documentation]  Configure hostname on BMC via Redfish.
350    [Arguments]  ${hostname}  ${status_code}=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
351
352    # Description of argument(s):
353    # hostname  A hostname value which is to be configured on BMC.
354
355    ${active_channel_config}=  Get Active Channel Config
356    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
357
358    ${data}=  Create Dictionary  HostName=${hostname}
359    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
360    ...  valid_status_codes=${status_code}
361
362
363Verify IP On BMC
364    [Documentation]  Verify IP on BMC.
365    [Arguments]  ${ip}
366
367    # Description of argument(s):
368    # ip  IP address to be verified (e.g. "10.7.7.7").
369
370    # Get IP address details on BMC using IP command.
371    @{ip_data}=  Get BMC IP Info
372    Should Contain Match  ${ip_data}  ${ip}/*
373    ...  msg=IP address does not exist.
374
375
376Verify Gateway On BMC
377    [Documentation]  Verify gateway on BMC.
378    [Arguments]  ${gateway_ip}=0.0.0.0
379
380    # Description of argument(s):
381    # gateway_ip  Gateway IP address.
382
383    ${route_info}=  Get BMC Route Info
384
385    # If gateway IP is empty or 0.0.0.0 it will not have route entry.
386
387    Run Keyword If  '${gateway_ip}' == '0.0.0.0'
388    ...      Pass Execution  Gateway IP is "0.0.0.0".
389    ...  ELSE
390    ...      Should Contain  ${route_info}  ${gateway_ip}
391    ...      msg=Gateway IP address not matching.
392
393
394Get BMC DNS Info
395    [Documentation]  Get system DNS info.
396
397
398    # Sample output of "resolv.conf":
399    # ### Generated manually via dbus settings ###
400    # nameserver 8.8.8.8
401
402    ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
403    ...  cat /etc/resolv.conf
404
405    [Return]  ${cmd_output}
406
407
408CLI Get Nameservers
409    [Documentation]  Get the nameserver IPs from /etc/resolv.conf and return as a list.
410
411    # Example of /etc/resolv.conf data:
412    # nameserver x.x.x.x
413    # nameserver y.y.y.y
414
415    ${stdout}  ${stderr}  ${rc}=  BMC Execute Command
416    ...  egrep nameserver /etc/resolv.conf | cut -f2- -d ' '
417    ${nameservers}=  Split String  ${stdout}
418
419    [Return]  ${nameservers}
420
421
422Get Network Configuration
423    [Documentation]  Get network configuration.
424    # Sample output:
425    #{
426    #  "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface",
427    #  "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0",
428    #  "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface",
429    #  "Description": "Management Network Interface",
430    #  "IPv4Addresses": [
431    #    {
432    #      "Address": "169.254.xx.xx",
433    #      "AddressOrigin": "IPv4LinkLocal",
434    #      "Gateway": "0.0.0.0",
435    #      "SubnetMask": "255.255.0.0"
436    #    },
437    #    {
438    #      "Address": "xx.xx.xx.xx",
439    #      "AddressOrigin": "Static",
440    #      "Gateway": "xx.xx.xx.1",
441    #      "SubnetMask": "xx.xx.xx.xx"
442    #    }
443    #  ],
444    #  "Id": "eth0",
445    #  "MACAddress": "xx:xx:xx:xx:xx:xx",
446    #  "Name": "Manager Ethernet Interface",
447    #  "SpeedMbps": 0,
448    #  "VLAN": {
449    #    "VLANEnable": false,
450    #    "VLANId": 0
451    #  }
452    [Arguments]  ${network_active_channel}=${CHANNEL_NUMBER}
453
454    # Description of argument(s):
455    # network_active_channel   Ethernet channel number (eg. 1 or 2)
456
457    ${active_channel_config}=  Get Active Channel Config
458    ${resp}=  Redfish.Get
459    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${network_active_channel}']['name']}
460
461    @{network_configurations}=  Get From Dictionary  ${resp.dict}  IPv4StaticAddresses
462    [Return]  @{network_configurations}
463
464
465Add IP Address
466    [Documentation]  Add IP Address To BMC.
467    [Arguments]  ${ip}  ${subnet_mask}  ${gateway}
468    ...  ${valid_status_codes}=${HTTP_OK}
469
470    # Description of argument(s):
471    # ip                  IP address to be added (e.g. "10.7.7.7").
472    # subnet_mask         Subnet mask for the IP to be added
473    #                     (e.g. "255.255.0.0").
474    # gateway             Gateway for the IP to be added (e.g. "10.7.7.1").
475    # valid_status_codes  Expected return code from patch operation
476    #                     (e.g. "200").  See prolog of rest_request
477    #                     method in redfish_plus.py for details.
478
479    ${empty_dict}=  Create Dictionary
480    ${ip_data}=  Create Dictionary  Address=${ip}
481    ...  SubnetMask=${subnet_mask}  Gateway=${gateway}
482
483    ${patch_list}=  Create List
484    ${network_configurations}=  Get Network Configuration
485    ${num_entries}=  Get Length  ${network_configurations}
486
487    FOR  ${INDEX}  IN RANGE  0  ${num_entries}
488      Append To List  ${patch_list}  ${empty_dict}
489    END
490
491    ${valid_status_codes}=  Run Keyword If  '${valid_status_codes}' == '${HTTP_OK}'
492    ...  Set Variable   ${HTTP_OK},${HTTP_NO_CONTENT}
493    ...  ELSE  Set Variable  ${valid_status_codes}
494
495    # We need not check for existence of IP on BMC while adding.
496    Append To List  ${patch_list}  ${ip_data}
497    ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}
498
499    ${active_channel_config}=  Get Active Channel Config
500    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
501
502    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
503    ...  valid_status_codes=[${valid_status_codes}]
504
505    Return From Keyword If  '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}'
506
507    # Note: Network restart takes around 15-18s after patch request processing.
508    Sleep  ${NETWORK_TIMEOUT}s
509    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
510
511    Verify IP On BMC  ${ip}
512    Validate Network Config On BMC
513
514
515Delete IP Address
516    [Documentation]  Delete IP Address Of BMC.
517    [Arguments]  ${ip}  ${valid_status_codes}=${HTTP_OK}
518
519    # Description of argument(s):
520    # ip                  IP address to be deleted (e.g. "10.7.7.7").
521    # valid_status_codes  Expected return code from patch operation
522    #                     (e.g. "200").  See prolog of rest_request
523    #                     method in redfish_plus.py for details.
524
525    ${empty_dict}=  Create Dictionary
526    ${patch_list}=  Create List
527
528    @{network_configurations}=  Get Network Configuration
529    FOR  ${network_configuration}  IN  @{network_configurations}
530      Run Keyword If  '${network_configuration['Address']}' == '${ip}'
531      ...  Append To List  ${patch_list}  ${null}
532      ...  ELSE  Append To List  ${patch_list}  ${empty_dict}
533    END
534
535    ${ip_found}=  Run Keyword And Return Status  List Should Contain Value
536    ...  ${patch_list}  ${null}  msg=${ip} does not exist on BMC
537    Pass Execution If  ${ip_found} == ${False}  ${ip} does not exist on BMC
538
539    # Run patch command only if given IP is found on BMC
540    ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}
541
542    ${active_channel_config}=  Get Active Channel Config
543    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
544
545    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
546    ...  valid_status_codes=[${valid_status_codes}]
547
548    # Note: Network restart takes around 15-18s after patch request processing
549    Sleep  ${NETWORK_TIMEOUT}s
550    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
551
552    ${delete_status}=  Run Keyword And Return Status  Verify IP On BMC  ${ip}
553    Run Keyword If  '${valid_status_codes}' == '${HTTP_OK}'
554    ...  Should Be True  '${delete_status}' == '${False}'
555    ...  ELSE  Should Be True  '${delete_status}' == '${True}'
556
557    Validate Network Config On BMC
558
559
560Validate Network Config On BMC
561    [Documentation]  Check that network info obtained via redfish matches info
562    ...              obtained via CLI.
563
564    @{network_configurations}=  Get Network Configuration
565    ${ip_data}=  Get BMC IP Info
566    FOR  ${network_configuration}  IN  @{network_configurations}
567      Should Contain Match  ${ip_data}  ${network_configuration['Address']}/*
568      ...  msg=IP address does not exist.
569    END
570
571
572Create VLAN
573    [Documentation]  Create a VLAN.
574    [Arguments]  ${id}  ${interface}=eth0  ${expected_result}=valid
575
576    # Description of argument(s):
577    # id  The VLAN ID (e.g. '53').
578    # interface  The physical interface for the VLAN(e.g. 'eth0').
579    # expected_result  Expected status of VLAN configuration.
580
581    @{data_vlan_id}=  Create List  ${interface}  ${id}
582    ${data}=  Create Dictionary   data=@{data_vlan_id}
583    ${resp}=  OpenBMC Post Request  ${vlan_resource}  data=${data}
584    ${resp.status_code}=  Convert To String  ${resp.status_code}
585    ${status}=  Run Keyword And Return Status
586    ...  Valid Value  resp.status_code  ["${HTTP_OK}"]
587
588    Run Keyword If  '${expected_result}' == 'error'
589    ...      Should Be Equal  ${status}  ${False}
590    ...      msg=Configuration of an invalid VLAN ID Failed.
591    ...  ELSE
592    ...      Should Be Equal  ${status}  ${True}
593    ...      msg=Configuration of a valid VLAN ID Failed.
594
595    Sleep  ${NETWORK_TIMEOUT}s
596
597
598Configure Network Settings On VLAN
599    [Documentation]  Configure network settings.
600    [Arguments]  ${id}  ${ip_addr}  ${prefix_len}  ${gateway_ip}=${gateway}
601    ...  ${expected_result}=valid  ${interface}=eth0
602
603    # Description of argument(s):
604    # id               The VLAN ID (e.g. '53').
605    # ip_addr          IP address of VLAN Interface.
606    # prefix_len       Prefix length of VLAN Interface.
607    # gateway_ip       Gateway IP address of VLAN Interface.
608    # expected_result  Expected status of network setting configuration.
609    # interface        Physical Interface on which the VLAN is defined.
610
611    @{ip_parm_list}=  Create List  ${network_resource}
612    ...  ${ip_addr}  ${prefix_len}  ${gateway_ip}
613
614    ${data}=  Create Dictionary  data=@{ip_parm_list}
615
616    Run Keyword And Ignore Error  OpenBMC Post Request
617    ...  ${NETWORK_MANAGER}${interface}_${id}/action/IP  data=${data}
618
619    # After any modification on network interface, BMC restarts network
620    # module, wait until it is reachable. Then wait 15 seconds for new
621    # configuration to be updated on BMC.
622
623    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
624    ...  ${NETWORK_RETRY_TIME}
625    Sleep  ${NETWORK_TIMEOUT}s
626
627    # Verify whether new IP address is populated on BMC system.
628    # It should not allow to configure invalid settings.
629    ${status}=  Run Keyword And Return Status
630    ...  Verify IP On BMC  ${ip_addr}
631
632    Run Keyword If  '${expected_result}' == 'error'
633    ...      Should Be Equal  ${status}  ${False}
634    ...      msg=Configuration of invalid IP Failed.
635    ...  ELSE
636    ...      Should Be Equal  ${status}  ${True}
637    ...      msg=Configuration of valid IP Failed.
638
639
640Get BMC Default Gateway
641    [Documentation]  Get system default gateway.
642
643    ${route_info}=  Get BMC Route Info
644
645    ${lines}=  Get Lines Containing String  ${route_info}  default via
646
647    ${active_channel_config}=  Get Active Channel Config
648    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
649
650    # Extract the corresponding default gateway for eth0 and eth1
651    ${default_gw_line}=  Get Lines Containing String  ${lines}  ${ethernet_interface}
652    ${default_gw}=  Split String  ${default_gw_line}
653
654    # Example of the output
655    # default_gw:
656    #   [0]:   default
657    #   [1]:   via
658    #   [2]:   xx.xx.xx.1
659    #   [3]:   dev
660    #   [4]:   eth1
661
662    [Return]  ${default_gw[2]}
663
664
665Validate Hostname On BMC
666    [Documentation]  Verify that the hostname read via Redfish is the same as the
667    ...  hostname configured on system.
668    [Arguments]  ${hostname}
669
670    # Description of argument(s):
671    # hostname  A hostname value which is to be compared to the hostname
672    #           configured on system.
673
674    ${sys_hostname}=  Get BMC Hostname
675    Should Be Equal  ${sys_hostname}  ${hostname}
676    ...  ignore_case=True  msg=Hostname does not exist.
677
678Get Channel Number For All Interface
679    [Documentation]  Gets the Interface name and returns the channel number for the given interface.
680
681    ${valid_channel_number_interface_names}=  Get Channel Config
682
683    ${valid_channel_number_interface_names}=  Convert To Dictionary  ${valid_channel_number_interface_names}
684
685    [Return]  ${valid_channel_number_interface_names}
686
687Get Valid Channel Number
688    [Documentation]  Get Valid Channel Number.
689    [Arguments]  ${valid_channel_number_interface_names}
690
691    #Description of argument(s):
692    #valid_channel_number_interface_names   Contains channel names in dict.
693
694    &{valid_channel_number_interface_name}=  Create Dictionary
695
696    FOR  ${key}  ${values}  IN  &{valid_channel_number_interface_names}
697      Run Keyword If  '${values['is_valid']}' == 'True'
698      ...  Set To Dictionary  ${valid_channel_number_interface_name}  ${key}  ${values}
699    END
700
701    [Return]  ${valid_channel_number_interface_name}
702
703Get Invalid Channel Number List
704    [Documentation]  Get Invalid Channel and return as list.
705
706    ${available_channels}=  Get Channel Number For All Interface
707    # Get the channel which medium_type as 'reserved' and append it to a list.
708    @{invalid_channel_number_list}=  Create List
709
710    FOR  ${channel_number}  ${values}  IN  &{available_channels}
711       Run Keyword If  '${values['channel_info']['medium_type']}' == 'reserved'
712       ...  Append To List  ${invalid_channel_number_list}  ${channel_number}
713    END
714
715    [Return]  ${invalid_channel_number_list}
716
717
718Get Channel Number For Valid Ethernet Interface
719    [Documentation]  Get channel number for all ethernet interface.
720    [Arguments]  ${valid_channel_number_interface_name}
721
722    # Description of argument(s):
723    # channel_number_list  Contains channel names in list.
724
725    @{channel_number_list}=  Create List
726
727    FOR  ${channel_number}  ${values}  IN  &{valid_channel_number_interface_name}
728      ${usb_interface_status}=  Run Keyword And Return Status  Should Not Contain  ${values['name']}  usb
729      Continue For Loop IF  ${usb_interface_status} == False
730      Run Keyword If  '${values['channel_info']['medium_type']}' == 'lan-802.3'
731      ...  Append To List  ${channel_number_list}  ${channel_number}
732    END
733
734    [Return]  ${channel_number_list}
735
736
737Get Current Channel Name List
738    [Documentation]  Get Current Channel name and append it to active channel list.
739    [Arguments]  ${channel_list}  ${channel_config_json}
740
741    # Description of Arguments
742    # ${channel_list}        - list Contains all available active channels.
743    # ${channel_config_json} - output of /usr/share/ipmi-providers/channel_config.json file.
744
745    FOR  ${channel_number}  ${values}  IN  &{channel_config_json}
746        Run Keyword If  '${values['name']}' == 'SELF'
747        ...  Run Keyword  Append To List  ${channel_list}  ${channel_number}
748    END
749
750    [Return]  ${channel_list}
751
752
753Get Active Ethernet Channel List
754    [Documentation]  Get Available channels from channel_config.json file and return as list.
755    [Arguments]  ${current_channel}=${0}
756
757    ${valid_channel_number_interface_names}=  Get Channel Number For All Interface
758
759    ${valid_channel_number_interface_name}=  Get Valid Channel Number  ${valid_channel_number_interface_names}
760
761    ${channel_number_list}=  Get Channel Number For Valid Ethernet Interface
762    ...  ${valid_channel_number_interface_name}
763
764    Return From Keyword If  ${current_channel} == 0  ${channel_number_list}
765    ${channel_number_list}=  Get Current Channel Name List
766    ...  ${channel_number_list}  ${valid_channel_number_interface_names}
767
768    [Return]  ${channel_number_list}
769
770Update IP Address
771    [Documentation]  Update and verify IP address of BMC.
772    [Arguments]  ${ip}  ${new_ip}  ${netmask}  ${gw_ip}
773    ...  ${valid_status_codes}=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
774
775    # Description of argument(s):
776    # ip                  IP address to be replaced (e.g. "10.7.7.7").
777    # new_ip              New IP address to be configured.
778    # netmask             Netmask value.
779    # gw_ip               Gateway IP address.
780    # valid_status_codes  Expected return code from patch operation
781    #                     (e.g. "200").  See prolog of rest_request
782    #                     method in redfish_plus.py for details.
783
784    ${empty_dict}=  Create Dictionary
785    ${patch_list}=  Create List
786    ${ip_data}=  Create Dictionary
787    ...  Address=${new_ip}  SubnetMask=${netmask}  Gateway=${gw_ip}
788
789    # Find the position of IP address to be modified.
790    @{network_configurations}=  Get Network Configuration
791    FOR  ${network_configuration}  IN  @{network_configurations}
792      Run Keyword If  '${network_configuration['Address']}' == '${ip}'
793      ...  Append To List  ${patch_list}  ${ip_data}
794      ...  ELSE  Append To List  ${patch_list}  ${empty_dict}
795    END
796
797    # Modify the IP address only if given IP is found
798    ${ip_found}=  Run Keyword And Return Status  List Should Contain Value
799    ...  ${patch_list}  ${ip_data}  msg=${ip} does not exist on BMC
800    Pass Execution If  ${ip_found} == ${False}  ${ip} does not exist on BMC
801
802    ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}
803
804    ${active_channel_config}=  Get Active Channel Config
805    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
806
807    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}
808    ...  body=&{data}  valid_status_codes=${valid_status_codes}
809
810    # Note: Network restart takes around 15-18s after patch request processing.
811    Sleep  ${NETWORK_TIMEOUT}s
812    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}
813
814    Verify IP On BMC  ${new_ip}
815    Validate Network Config On BMC
816
817