1*** Settings *** 2Resource ../lib/utils.robot 3Resource ../lib/connection_client.robot 4Resource ../lib/boot_utils.robot 5Library ../lib/gen_misc.py 6Library ../lib/utils.py 7 8*** Variables *** 9# MAC input from user. 10${MAC_ADDRESS} ${EMPTY} 11 12 13*** Keywords *** 14 15Check And Reset MAC 16 [Documentation] Update BMC with user input MAC address. 17 [Arguments] ${mac_address}=${MAC_ADDRESS} 18 19 # Description of argument(s): 20 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 21 22 Should Not Be Empty ${mac_address} 23 Open Connection And Log In 24 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 25 ... cat /sys/class/net/eth0/address 26 Run Keyword If '${mac_address.lower()}' != '${bmc_mac_addr.lower()}' 27 ... Set MAC Address 28 29 30Set MAC Address 31 [Documentation] Update eth0 with input MAC address. 32 [Arguments] ${mac_address}=${MAC_ADDRESS} 33 34 # Description of argument(s): 35 # mac_address The mac address (e.g. 00:01:6c:80:02:28). 36 37 Write fw_setenv ethaddr ${mac_address} 38 OBMC Reboot (off) 39 40 # Take SSH session post BMC reboot. 41 Open Connection And Log In 42 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command 43 ... cat /sys/class/net/eth0/address 44 Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True 45 46 47Get BMC IP Info 48 [Documentation] Get system IP address and prefix length. 49 50 51 # Get system IP address and prefix length details using "ip addr" 52 # Sample Output of "ip addr": 53 # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000 54 # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff 55 # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0 56 57 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 58 ... /sbin/ip addr | grep eth0 59 60 # Get line having IP address details. 61 ${lines}= Get Lines Containing String ${cmd_output} inet 62 63 # List IP address details. 64 @{ip_components}= Split To Lines ${lines} 65 66 @{ip_data}= Create List 67 68 # Get all IP addresses and prefix lengths on system. 69 :FOR ${ip_component} IN @{ip_components} 70 \ @{if_info}= Split String ${ip_component} 71 \ ${ip_n_prefix}= Get From List ${if_info} 1 72 \ Append To List ${ip_data} ${ip_n_prefix} 73 74 [Return] ${ip_data} 75 76Get BMC Route Info 77 [Documentation] Get system route info. 78 79 80 # Sample output of "ip route": 81 # default via xx.xx.xx.x dev eth0 82 # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx 83 # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx 84 85 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 86 ... /sbin/ip route 87 88 [Return] ${cmd_output} 89 90# TODO: openbmc/openbmc-test-automation#1331 91Get BMC MAC Address 92 [Documentation] Get system MAC address. 93 94 95 # Sample output of "ip addr | grep ether": 96 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 97 98 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 99 ... /sbin/ip addr | grep ether 100 101 # Split the line and return MAC address. 102 # Split list data: 103 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 104 105 @{words}= Split String ${cmd_output} 106 107 [Return] ${words[1]} 108 109 110Get BMC MAC Address List 111 [Documentation] Get system MAC address 112 113 # Sample output of "ip addr | grep ether": 114 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff 115 116 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 117 ... /sbin/ip addr | grep ether 118 119 # Split the line and return MAC address. 120 # Split list data: 121 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 122 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff 123 124 ${mac_list}= Create List 125 @{lines}= Split To Lines ${cmd_output} 126 :FOR ${line} IN @{lines} 127 \ @{words}= Split String ${line} 128 \ Append To List ${mac_list} ${words[1]} 129 130 [Return] ${mac_list} 131 132Get BMC Hostname 133 [Documentation] Get BMC hostname. 134 135 # Sample output of "hostname": 136 # test_hostname 137 138 ${output} ${stderr} ${rc}= BMC Execute Command hostname 139 140 [Return] ${output} 141 142Get List Of IP Address Via REST 143 [Documentation] Get list of IP address via REST. 144 [Arguments] @{ip_uri_list} 145 146 # Description of argument(s): 147 # ip_uri_list List of IP objects. 148 # Example: 149 # "data": [ 150 # "/xyz/openbmc_project/network/eth0/ipv4/e9767624", 151 # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b" 152 # ], 153 154 ${ip_list}= Create List 155 156 : FOR ${ip_uri} IN @{ip_uri_list} 157 \ ${ip_addr}= Read Attribute ${ip_uri} Address 158 \ Append To List ${ip_list} ${ip_addr} 159 160 [Return] @{ip_list} 161 162Delete IP And Object 163 [Documentation] Delete IP and object. 164 [Arguments] ${ip_addr} @{ip_uri_list} 165 166 # Description of argument(s): 167 # ip_addr IP address to be deleted. 168 # ip_uri_list List of IP object URIs. 169 170 # Find IP object having this IP address. 171 172 : FOR ${ip_uri} IN @{ip_uri_list} 173 \ ${ip_addr1}= Read Attribute ${ip_uri} Address 174 \ Run Keyword If '${ip_addr}' == '${ip_addr1}' Exit For Loop 175 176 # If the given IP address is not configured, return. 177 # Otherwise, delete the IP and object. 178 179 Run Keyword And Return If '${ip_addr}' != '${ip_addr1}' 180 ... Pass Execution IP address to be deleted is not configured. 181 182 Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri} 183 184 # After any modification on network interface, BMC restarts network 185 # module, wait until it is reachable. Then wait 15 seconds for new 186 # configuration to be updated on BMC. 187 188 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} 189 ... ${NETWORK_RETRY_TIME} 190 Sleep 15s 191 192 # Verify whether deleted IP address is removed from BMC system. 193 194 ${ip_data}= Get BMC IP Info 195 Should Not Contain Match ${ip_data} ${ip_addr}* 196 ... msg=IP address not deleted. 197 198Get First Non Pingable IP From Subnet 199 [Documentation] Find first non-pingable IP from the subnet and return it. 200 [Arguments] ${host}=${OPENBMC_HOST} 201 202 # Description of argument(s): 203 # host Any valid host name or IP address 204 # (e.g. "machine1" or "9.xx.xx.31"). 205 206 # Non-pingable IP is unused IP address in the subnet. 207 ${host_name} ${ip_addr}= Get Host Name IP 208 209 # Split IP address into network part and host part. 210 # IP address will have 4 octets xx.xx.xx.xx. 211 # Sample output after split: 212 # split_ip [xx.xx.xx, xx] 213 214 ${split_ip}= Split String From Right ${ip_addr} . 1 215 # First element in list is Network part. 216 ${network_part}= Get From List ${split_ip} 0 217 218 : FOR ${octet4} IN RANGE 1 255 219 \ ${new_ip}= Catenate ${network_part}.${octet4} 220 \ ${status}= Run Keyword And Return Status Ping Host ${new_ip} 221 # If IP is non-pingable, return it. 222 \ Return From Keyword If '${status}' == 'False' ${new_ip} 223 224 Fail msg=No non-pingable IP could be found in subnet ${network_part}. 225 226 227Validate MAC On BMC 228 [Documentation] Validate MAC on BMC. 229 [Arguments] ${mac_addr} 230 231 # Description of argument(s): 232 # mac_addr MAC address of the BMC. 233 234 ${system_mac}= Get BMC MAC Address 235 236 ${status}= Compare MAC Address ${system_mac} ${mac_addr} 237 Should Be True ${status} 238 ... msg=MAC address ${system_mac} does not match ${mac_addr}. 239 240 241Run Build Net 242 [Documentation] Run build_net to preconfigure the ethernet interfaces. 243 244 OS Execute Command build_net help y y 245 # Run pingum to check if the "build_net" was run correctly done. 246 ${output} ${stderr} ${rc}= OS Execute Command pingum 247 Should Contain ${output} All networks ping Ok 248 249 250Configure Hostname 251 [Documentation] Configure hostname on BMC via Redfish. 252 [Arguments] ${hostname} 253 254 # Description of argument(s): 255 # hostname A hostname value which is to be configured on BMC. 256 257 ${data}= Create Dictionary HostName=${hostname} 258 Redfish.patch ${REDFISH_NW_PROTOCOL_URI} body=&{data} 259 260 261Verify IP On BMC 262 [Documentation] Verify IP on BMC. 263 [Arguments] ${ip} 264 265 # Description of argument(s): 266 # ip IP address to be verified (e.g. "10.7.7.7"). 267 268 # Get IP address details on BMC using IP command. 269 @{ip_data}= Get BMC IP Info 270 Should Contain Match ${ip_data} ${ip}/* 271 ... msg=IP address does not exist. 272 273 274Verify Gateway On BMC 275 [Documentation] Verify gateway on BMC. 276 [Arguments] ${gateway_ip}=0.0.0.0 277 278 # Description of argument(s): 279 # gateway_ip Gateway IP address. 280 281 ${route_info}= Get BMC Route Info 282 283 # If gateway IP is empty or 0.0.0.0 it will not have route entry. 284 285 Run Keyword If '${gateway_ip}' == '0.0.0.0' 286 ... Pass Execution Gateway IP is "0.0.0.0". 287 ... ELSE 288 ... Should Contain ${route_info} ${gateway_ip} 289 ... msg=Gateway IP address not matching. 290 291 292Get BMC DNS Info 293 [Documentation] Get system DNS info. 294 295 296 # Sample output of "resolv.conf": 297 # ### Generated manually via dbus settings ### 298 # nameserver 8.8.8.8 299 300 ${cmd_output} ${stderr} ${rc}= BMC Execute Command 301 ... cat /etc/resolv.conf 302 303 [Return] ${cmd_output} 304 305 306CLI Get Nameservers 307 [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list. 308 309 # Example of /etc/resolv.conf data: 310 # nameserver x.x.x.x 311 # nameserver y.y.y.y 312 313 ${stdout} ${stderr} ${rc}= BMC Execute Command egrep nameserver /etc/resolv.conf | cut -f2- -d ' ' 314 ${nameservers}= Split String ${stdout} 315 316 [Return] ${nameservers} 317