1*** Settings ***
2
3Documentation    Module to test IPMI SEL Time functionality.
4...              Pre-requisite Condition : Client Machine and BMC should be in
5...              Same TimeZone (example : UST)
6...
7...              IPMI Raw command variables are defined under
8...              ../data/ipmi_raw_command_table.py
9...
10...              Test the Set/Get SEL Time functionality and compare the result against
11...              BMC Native command (date).
12...
13...              Set the Time Sync Mode from NTP to Manual to Set SEL Time.
14...              Time Sync Mode change performed via REDFISH URI.
15...              Performs the change in Time Sync Mode with Test Setup and Teardown Execution
16...              with default NETWORK_TIMEOUT provided under ../lib/resource.robot.
17...
18...              NETWORK_RESTART_TIME added for Set SEL Time and Add SEL Entry as the corresponding
19...              command takes approx 5 seconds for the operation to reflect.
20...
21...              Current SEL time identified via BMC Native command (date) and perform SEL Time operations.
22...
23...              Script Verifies SEL Time for various scenarios such as,
24...              Get current time from BMC and add future year and compare against BMC native command (date),
25...              Gets BMC Current Time and Adds 15 minutes and compare against BMC native command (date),
26...              Gets BMC Current Time and subtracts 1 day and compare against BMC native command (date),
27...              Add SEL Entry for all the above scenarios and compare against BMC native command (date).
28
29Library          DateTime
30Library          Collections
31Library          String
32Library          ../lib/ipmi_utils.py
33Resource         ../lib/ipmi_client.robot
34Resource         ../lib/openbmc_ffdc.robot
35Variables        ../data/ipmi_raw_cmd_table.py
36
37Test Setup       Test Setup Execution
38Test Teardown    Test Teardown Execution
39
40*** Variables ***
41
42${NETWORK_RESTART_TIME}   5s
43@{time_difference_list}  +8760:153:25  -87600:453:120  +175200:40:15  -43800:10:05  +20:35:12  -8760:00:00
44
45# Based on 13th byte of add SEL entry command as per IPMI spec
46# event_dir and event_type variable value needs to be given.
47${sel_no_entry_msg}  SEL has no entries
48${event_type}        Lower Non-critical going low
49${event_dir}         Asserted
50# number_of_times_sel_entry_added this variable is used in Verify Multiple Set SEL Time With Multiple Add SEL Entry
51# test case. Need to give how many sel should be added with multiple date and time.
52${number_of_times_sel_entry_added}    6
53
54*** Test Cases ***
55
56Verify Default Get SEL Time
57    [Documentation]  Verify IPMI Get SEL Time.
58    [Tags]  Verify_Default_Get_SEL_Time
59    [Setup]  Printn
60    [Teardown]  FFDC On Test Case Fail
61
62    # Gets the current SEL time via Get SEL Time Command.
63    ${resp}=  Get SEL Time Command
64    Should Not Be Empty  ${resp}
65
66
67Verify Set SEL Time On NTP Mode
68    [Documentation]   IPMI Set SEL Time without NTP
69    [Tags]  Verify_Set_SEL_Time_On_NTP_Mode
70    [Setup]  Printn
71    [Teardown]  printn
72
73    # Get current time from BMC and add future year (here, 5years).
74    ${sel_date}=  Get Specific Sel Date  5
75
76    # Gives Hexa decimal raw command data request with the prefix of 0x.
77    ${sel_date_raw}=  Converting Date to HexaDecimal  ${sel_date}
78
79    ${Set_sel_time}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][2]}*
80    ...  Run IPMI Command  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw}
81    Should Contain  ${Set_sel_time}  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][1]}
82
83
84Verify SEL Set Time For Specific Time
85    [Documentation]  Verify IPMI Set SEL Time.
86    [Tags]  Verify_SEL_Set_Time_For_Specific_Time
87
88    # Get current time from BMC and add future year (here, 5years).
89    ${sel_date}=  Get Specific Sel Date  5
90
91    # Gives Hexa decimal raw command data request with the prefix of 0x.
92    ${sel_date_raw}=  Converting Date to HexaDecimal  ${sel_date}
93
94    # Set SEL Entry command.
95    Set SEL Time Entry Via Raw Command  ${sel_date_raw}
96
97    # Get SEL Time command.
98    ${get_sel_time}=  Check Current Date Time Via IPMI
99
100    # Identify Time difference and find the difference is less than 6 seconds.
101    # Command execution may happen at the end of millisecond so considered 6 seconds as difference.
102    ${time_difference}=  Get Time Difference  ${get_sel_time}  ${sel_date}
103    Should Be True  0<=${time_difference}<=5
104    ...  msg=Set SEL Time Not Working
105
106    # Get BMC time (native) and compare with set sel time given.
107    ${bmc_time}=  Get Current Date from BMC
108
109    ${difference}=  Get Time Difference  ${bmc_time}  ${sel_date}
110    Should Be True  0<=${difference}<=6
111
112
113Verify Set SEL Time With Future Date And Time
114    [Documentation]  Verify IPMI Get SEL Time by adding 15 minutes from current time.
115    [Tags]  Verify_Set_SEL_Time_With_Future_Date_And_Time
116
117    # Gets BMC Current Time and Adds 15 minutes and sets the SEL Time.
118    ${sel_time}  ${set_sel_time}=  Identify SEL Time  +06:15:00
119
120    # Set SEL Time via IPMI command.
121    Set SEL Time Via IPMI  ${sel_time}
122
123    # Get SEL Time Command.
124    ${get_sel_time}=  Check Current Date Time Via IPMI
125
126    # Difference of time between set sel time and get time.
127    ${difference}=  Get Time Difference  ${get_sel_time}  ${set_sel_time}
128    Should Be True  0<=${difference}<=2
129
130    # Difference of time between BMC Date and Get SEL Time.
131    ${bmc_time}=  Get Current Date from BMC
132    ${difference}=  Get Time Difference  ${get_sel_time}  ${bmc_time}
133    Should Be True  0<=${difference}<=2
134
135
136Verify Set SEL Time With Past Date And Time
137    [Documentation]  Verify IPMI Get SEL Time for yime delay of 1 day from current dat and time.
138    [Tags]  Verify_Set_SEL_Time_With_Past_Date_And_Time
139
140    # Gets BMC current time and subtracts 1 day and sets the SEL Time.
141    ${sel_time}  ${set_sel_time}=  Identify SEL Time  -24:00:00
142
143    ${status}=  Run Keyword And Return Status  Should Not Contain  ${sel_time}  1969
144    ...  msg=Date cannot be less than 1970.
145
146    IF  '${status}' == '${TRUE}'
147        # Set SEL Time via IPMI command.
148        Set SEL Time Via IPMI  ${sel_time}
149        # Get SEL Time Command.
150        ${get_sel_time}=  Check Current Date Time Via IPMI
151        # Difference of time between set sel time and get time.
152        ${difference}=  Get Time Difference  ${get_sel_time}  ${set_sel_time}
153        Should Be True  0<=${difference}<=2
154        # Difference of time between BMC Date and Get SEL Time.
155        ${bmc_time}=  Get Current Date from BMC
156        ${difference}=  Get Time Difference  ${get_sel_time}  ${bmc_time}
157        Should Be True  0<=${difference}<=2
158    ELSE
159        FAIL  SEL Time cannot set Date less than 1970
160    END
161
162
163Verify SEL Set Time For Invalid Data Request
164    [Documentation]  Verify IPMI Get SEL Time for invalid data request
165    [Tags]  Verify_SEL_Set_Time_For_Invalid_Data_Request
166    [Setup]  Printn
167    [Teardown]  FFDC On Test Case Fail
168
169    # Gets BMC current date via date command.
170    ${current_date}=  Get Current Date from BMC
171
172    # Gives hexa decimal Raw command data request with the prefix of 0x.
173    ${sel_date_raw}=  Converting Date to HexaDecimal  ${current_date}
174
175    # Set Invalid SEL Time with one extra request byte.
176    ${Set_seltime_invalid}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}*
177    ...  Run IPMI Command  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw} 0x00
178    Should Contain  ${Set_seltime_invalid}  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][3]}
179
180
181Verify SEL Set Time For Incomplete Data Request
182    [Documentation]  Verify IPMI Get SEL Time for invalid data with one byte less request data.
183    [Tags]  Verify_SEL_Set_Time_For_Incomplete_Data_Request
184    [Setup]  Printn
185    [Teardown]  FFDC On Test Case Fail
186
187    # Gets BMC current date via date command.
188    ${current_date}=  Get Current Date from BMC
189
190    # Gives hexa decimal raw command data request with the prefix of 0x.
191    ${sel_date_raw}=  Converting Date to HexaDecimal  ${current_date}
192
193    # For data request less than expected byes, remove last byte.
194    ${sel_date_raw}=  Split String  ${sel_date_raw}
195    Remove From List  ${sel_date_raw}  -1
196    ${sel_date_raw}=  Evaluate  " ".join(${sel_date_raw})
197
198    # Set incomplete SEL Time with one less request byte.
199    ${Set_seltime_incomplete}=
200    ...  Run Keyword and Expect Error  *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}*
201    ...  Run IPMI Command  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw}
202    Should Contain  ${Set_seltime_incomplete}  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][3]}
203
204
205Verify SEL Time In SEL Entry
206    [Documentation]  Verify Configured SEL Time reflects in newly added SEL Entry.
207    [Tags]  Verify_SEL_Time_In_SEL_Entry
208
209    Clear The SEL
210
211   # change to manual, get current time and add future year (here, 5years).
212    ${sel_date}=  Get Specific Sel Date  5
213
214    # Gives hexa decimal raw command data request with the prefix of 0x.
215    ${sel_date_raw}=  Converting Date to HexaDecimal  ${sel_date}
216
217    # Set SEL Entry Command.
218    Set SEL Time Entry Via Raw Command  ${sel_date_raw}
219
220    # Get SEL Time Command.
221    ${get_sel_time}=  Check Current Date Time Via IPMI
222
223    # Identify Time difference and find the difference is less than 6 seconds.
224    # Command execution may happen at the end of millisecond so considered 6 seconds as difference.
225    ${time_difference}=  Get Time Difference  ${get_sel_time}  ${sel_date}
226    Should Be True  0<=${time_difference}<=5
227    ...  msg=Set SEL Time Not Working
228
229    # Get BMC time (native) and compare with set sel time given.
230    ${bmc_time}=  Get Current Date from BMC
231
232    ${difference}=  Get Time Difference  ${bmc_time}  ${sel_date}
233    Should Be True  0<=${difference}<=6
234
235    # Get any Sensor available from Sensor list.
236    ${sensor_name}=  Fetch One Threshold Sensor From Sensor List
237
238    # Get Sensor ID from SDR Get "sensor".
239    ${sensor_data1}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor ID
240    ${sensor_number}=  Get Bytes From SDR Sensor  ${sensor_data1}
241
242    # Get Sensor Type from SDR Get "sensor".
243    ${sensor_data2}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor Type (Threshold)
244    ${sensor_type_id}=  Get Bytes From SDR Sensor  ${sensor_data2}
245
246    # Add SEL Entry.
247    ${sel_create_resp}=  Create SEL  ${sensor_type_id}  ${sensor_number}
248
249    # Finds the last added sel entry.
250    ${resp}=  Verify SEL Added  ${sensor_name}
251
252    # Fetches the date of the last added SEL Entry.
253    ${sel_entry_date}=  Fetch Added SEL Date  ${resp}
254
255    # Identify and find the time difference is less than 60 seconds.
256    # Finding the sensor details and execution may take up to a minute.
257    # Compare  date and time of Set SEL with sel entry.
258    ${d}=  Get Time Difference  ${sel_entry_date}  ${sel_date}
259    Should Be True  0<=${d}<=60
260
261
262Verify SEL Time In SEL Entry For Future Date and Time
263    [Documentation]  Verify configured SEL Time (Future Date & Time) in added SEL Entry.
264    [Tags]  Verify_SEL_Time_In_SEL_Entry_For_Future_Date_and_Time
265
266    Clear The SEL
267
268    # Gets BMC Current Time and Adds 15 minutes and sets the SEL Time.
269    ${sel_time}  ${set_sel_time}=  Identify SEL Time  +06:15:00
270
271    # Set SEL Time via IPMI command.
272    Set SEL Time Via IPMI  ${sel_time}
273
274    # Get SEL Time Command.
275    ${get_sel_time}=  Check Current Date Time Via IPMI
276
277    # Difference of time between set sel time and get time.
278    ${difference}=  Get Time Difference  ${get_sel_time}  ${set_sel_time}
279    Should Be True  0<=${difference}<=2
280
281    # Difference of time between BMC Date and Get SEL Time.
282    ${bmc_time}=  Get Current Date from BMC
283    ${difference}=  Get Time Difference  ${get_sel_time}  ${bmc_time}
284    Should Be True  0<=${difference}<=2
285
286    # Get any Sensor available from Sensor list.
287    ${sensor_name}=  Fetch One Threshold Sensor From Sensor List
288
289    # Get Sensor ID from SDR Get "sensor".
290    ${sensor_data1}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor ID
291    ${sensor_number}=  Get Bytes From SDR Sensor  ${sensor_data1}
292
293    # Get Sensor Type from SDR Get "sensor".
294    ${sensor_data2}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor Type (Threshold)
295    ${sensor_type_id}=  Get Bytes From SDR Sensor  ${sensor_data2}
296
297    # Add SEL Entry.
298    ${sel_create_resp}=  Create SEL  ${sensor_type_id}  ${sensor_number}
299
300    # Finds the last added sel entry.
301    ${resp}=  Verify SEL Added  ${sensor_name}
302
303    # Fetches the date of the last added SEL Entry.
304    ${sel_entry_date}=  Fetch Added SEL Date  ${resp}
305
306    # Identify and find the time difference is less than 60 seconds.
307    # Finding the sensor details and execution may take up to a minute.
308    # Compare  date and time of Set SEL with sel entry.
309    ${d}=  Get Time Difference  ${sel_entry_date}  ${set_sel_time}
310    Should Be True  0<=${d}<=60
311
312
313Verify SEL Time In SEL Entry For Past Date And Time
314    [Documentation]  Verify configured SEL Time (Past Date & Time) in added SEL Entry.
315    [Tags]  Verify_SEL_Time_In_SEL_Entry_For_Past_Date_And_Time
316
317    Clear The SEL
318
319    # Gets BMC Current Time and subtracts 1 day and sets the SEL Time.
320    ${sel_time}  ${set_sel_time}=  Identify SEL Time  -24:00:00
321
322    ${status}=  Run Keyword And Return Status  Should Not Contain  ${sel_time}  1969
323    ...  msg=Date cannot be less than 1970
324
325    IF  '${status}' == '${TRUE}'
326        # Set SEL Time via IPMI command.
327        Set SEL Time Via IPMI  ${sel_time}
328        # Get SEL Time Command.
329        ${get_sel_time}=  Check Current Date Time Via IPMI
330        # Difference of time between set sel time and get time.
331        ${difference}=  Get Time Difference  ${get_sel_time}  ${set_sel_time}
332        Should Be True  0<=${difference}<=2
333        # Difference of time between BMC Date and Get SEL Time.
334        ${bmc_time}=  Get Current Date from BMC
335        ${difference}=  Get Time Difference  ${get_sel_time}  ${bmc_time}
336        Should Be True  0<=${difference}<=2
337
338        # Get any Sensor available from Sensor list.
339        ${sensor_name}=  Fetch One Threshold Sensor From Sensor List
340        # Get Sensor ID from SDR Get "sensor".
341        ${sensor_data1}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor ID
342        ${sensor_number}=  Get Bytes From SDR Sensor  ${sensor_data1}
343
344        # Get Sensor Type from SDR Get "sensor".
345        ${sensor_data2}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor Type (Threshold)
346        ${sensor_type_id}=  Get Bytes From SDR Sensor  ${sensor_data2}
347
348        # Add SEL Entry.
349        ${sel_create_resp}=  Create SEL  ${sensor_type_id}  ${sensor_number}
350
351        # Finds the last added sel entry.
352        ${resp}=  Verify SEL Added  ${sensor_name}
353
354        # Fetches the date of the last added SEL Entry.
355        ${sel_entry_date}=  Fetch Added SEL Date  ${resp}
356
357        # Identify and find the time difference is less than 60 seconds.
358        # Finding the sensor details and execution may take up to a minute.
359        # Compare  date and time of Set SEL with sel entry.
360        ${d}=  Get Time Difference  ${sel_entry_date}  ${set_sel_time}
361        Should Be True  0<=${d}<=60
362    ELSE
363        FAIL  SEL Time cannot set Date less than 1970.
364    END
365
366
367Verify Multiple Set SEL Time With Multiple Add SEL Entry
368    [Documentation]  Verify SEL time in multiple addition Of SEL entry.
369    [Tags]  Verify_Multiple_Set_SEL_Time_With_Multiple_Add_SEL_Entry
370
371    FOR  ${i}  IN RANGE  ${number_of_times_sel_entry_added}
372
373      ${sel_time}  ${set_sel_time}=  Identify SEL Time  ${time_difference_list[${i}]}
374
375      # Set SEL Time via IPMI command.
376      Set SEL Time Via IPMI  ${sel_time}
377
378      # Clear the SEL.
379      Clear The SEL
380
381      # Get any Sensor available from Sensor list.
382      ${sensor_name}=  Fetch One Threshold Sensor From Sensor List
383
384      # Get Sensor ID from SDR Get "sensor" and Identify Sensor ID.
385      ${sensor_data1}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor ID
386      ${sensor_number}=  Get Bytes From SDR Sensor  ${sensor_data1}
387
388      # Get Sensor Type from SDR Get "sensor" and identify Sensor Type.
389      ${sensor_data2}=  Fetch Sensor Details From SDR  ${sensor_name}  Sensor Type (Threshold)
390      ${sensor_type_id}=  Get Bytes From SDR Sensor  ${sensor_data2}
391
392      # Add SEL Entry.
393      ${sel_create_resp}=  Create SEL  ${sensor_type_id}  ${sensor_number}
394
395      # Finds the last added sel entry.
396      ${resp}=  Verify SEL Added  ${sensor_name}
397
398      # Fetches the date of the last added SEL Entry.
399      ${sel_entry_date}=  Fetch Added SEL Date  ${resp}
400
401      # Identify and find the time difference is less than 60 seconds.
402      # Finding the sensor details and execution may take up to a minute.
403      # Compare  date and time of Set SEL with sel entry.
404      ${d}=  Get Time Difference  ${sel_entry_date}  ${set_sel_time}
405      Should Be True  ${d}<=60
406
407    END
408
409
410*** Keywords ***
411
412Time Sync Mode Change Through Redfish
413    [Documentation]  Export IP, token and change the time sync to manual.
414    [Arguments]   ${value}
415
416    # Description of argument(s):
417    # ${value}    Can be either ${FALSE} or ${TRUE}.
418
419    # May be changed to WebView.
420
421    # Changing Time Sync Mode to Manual.
422    Change Time Sync Mode Via Redfish  ${value}
423
424
425Change Time Sync Mode Via Redfish
426    [Documentation]  To change the time sync mode via Redfish.
427    [Arguments]   ${value}
428
429    # Description of argument(s):
430    # ${value}    Can be either ${FALSE} or ${TRUE}
431
432    # Creates request body for Redfish url.
433    ${mode}=  Create Dictionary  ProtocolEnabled=${value}
434    ${data}=  Create Dictionary  NTP=${mode}
435
436    # Patches the obtained body to the given url.
437    Redfish.patch  ${REDFISH_NW_PROTOCOL_URI}  body=&{data}
438    ...   valid_status_codes=[${HTTP_NO_CONTENT}]
439
440    Sleep  ${NETWORK_RESTART_TIME}
441
442
443Get SEL Time Command
444    [Documentation]  Get SEL Time command.
445
446    # The response will be 8 byte timestamp in hexadecimal.
447    # example: If current date and time is "Wed May  4 18:55:00 UTC 2022",
448    # then, ${get_sel_time} will be "07 cc 72 62".
449    ${get_sel_time}=  Run IPMI Command
450    ...  ${IPMI_RAW_CMD['SEL_entry']['Get_SEL_Time'][0]}
451
452    [Return]    ${get_sel_time}
453
454
455Set SEL Time Entry Via Raw Command
456    [Documentation]  Set SEL Time command.
457    [Arguments]  ${sel_date_raw}
458
459    # Description of argument(s):
460    # ${sel_date_raw}     Time to set in hexadecimal bytes.
461    # Example:
462    #    If date is 1st January 2022 12:30:00 PM,
463    #    the hexadecimal timestamp is, 61D04948.
464    #    then the request bytes are,
465    #    ${sel_date_raw}     0x48 0x49 0xd0 0x61
466
467    Run IPMI Command  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw}
468    Sleep  ${NETWORK_RESTART_TIME}
469
470
471Clear The SEL
472    [Documentation]  Clear SEL Command.
473
474    # Clear the SEL.
475    ${out}=  Run IPMI Standard Command  sel clear
476    Should Contain  ${out}  Clearing SEL
477    Sleep  2s
478
479
480Verify SEL Added
481    [Documentation]  Verify Added SEL.
482    [Arguments]  ${sensor_name}
483
484    # Description of argument(s):
485    # sensor_name         Name of the sensor.
486
487    ${resp}=  Run IPMI Standard Command  sel elist
488    Should Not Contain  ${resp}  ${sel_no_entry_msg}
489    ${get_sel_entry}=  Get Lines Containing String  ${resp}  ${sensor_name}
490    ${sel_entry}=  Get Lines Containing String  ${get_sel_entry}  ${event_type}
491    Should Contain  ${sel_entry}  ${event_dir}  msg=Add SEL Entry failed.
492
493    [Return]  ${sel_entry}
494
495
496Check Current Date Time Via IPMI
497    [Documentation]  Verify Current Date and Time Via IPMI user command.
498
499    ${resp}=  Run IPMI Standard Command  sel time get
500    [Return]  ${resp}
501
502
503Get Specific Sel Date
504    [Documentation]  Gets initial time and adds year to the current date and returns future date.
505    [Arguments]  ${year}
506
507    # Description of argument(s):
508    # ${year}             Can be any number of years (say 5 year).
509
510    ${current_date}=  Get Current Date from BMC
511
512    # Converting given years to days by multiplying with 365days and adding the days to current date.
513    ${days}=  Evaluate  365*${year}+1
514    ${date}=  Add Time To Date
515    ...  ${current_date}  ${days}d  result_format=%m/%d/%Y %H:%M:%S  date_format=%m/%d/%Y %H:%M:%S
516
517    [Return]   ${date}
518
519
520Converting Date to HexaDecimal
521    [Documentation]  Converting the date into hexa decimal values.
522    [Arguments]  ${date}
523
524    # Description of argument(s):
525    # ${date}             Can be any date in format %m/%d/%Y %H:%M:%S.
526
527    ${epoch_date}=  Convert Date  ${date}  epoch  exclude_millis=yes  date_format=%m/%d/%Y %H:%M:%S
528    ${date}=  Convert To Hex  ${epoch_date}  lowercase=yes
529
530    # function calls from utils.py.
531    # Length of the date byte should be 8 so that each bytes are separated.
532    ${date}=  Zfill Data  ${date}  8
533    # To split every two characters to form one byte each.
534    ${date}=  Split String With Index  ${date}  2
535    # Prefix every list index value with 0x.
536    ${date}=  Prefix Bytes  ${date}
537
538    # Reverse the bytes and join the list to form request Time stamp data.
539    Reverse List  ${date}
540    ${date}=  Evaluate  " ".join(${date})
541
542    [Return]  ${date}
543
544
545Get Time Difference
546    [Documentation]  Converting the date into hexa decimal values.
547    [Arguments]  ${date1}  ${date2}
548
549    # Description of argument(s):
550    # ${date1}             Can be any date in format %m/%d/%Y %H:%M:%S.
551    # ${date2}             Can be any date in format %m/%d/%Y %H:%M:%S.
552
553    ${epoch_date1}=  Convert Date  ${date1}  epoch  exclude_millis=yes  date_format=%m/%d/%Y %H:%M:%S
554    ${epoch_date2}=  Convert Date  ${date2}  epoch  exclude_millis=yes  date_format=%m/%d/%Y %H:%M:%S
555
556    ${diff}=  Evaluate  int(${epoch_date1}) - int(${epoch_date2})
557
558    [Return]  ${diff}
559
560
561Identify SEL Time
562    [Documentation]  Modify SEL Time From BMC For Set Sel Time Command.
563    [Arguments]  ${time}
564
565    # Description of argument(s):
566    # time             Can be any number of hours or minutes in format %H:%M:%S.
567
568    # Gets BMC current date via date command.
569    ${current_date}=  Get Current Date from BMC
570
571    ${modifying_date_status}=  Run Keyword And Return Status  Should Contain  ${time}  +
572
573    ${date_time}=  Set Variable IF
574    ...  ${modifying_date_status} == True  ${time.split("+")[-1]}
575    ...  ${modifying_date_status} == False  ${time.split("-")[-1]}
576
577    ${datetime} =  Run Keyword IF  ${modifying_date_status} == True
578    ...    Add Time To Date
579    ...    ${current_date}  ${date_time}  result_format=%m/%d/%Y %H:%M:%S  date_format=%m/%d/%Y %H:%M:%S
580    ...  ELSE IF  ${modifying_date_status} == False
581    ...    Subtract Time From Date
582    ...    ${current_date}  ${date_time}  result_format=%m/%d/%Y %H:%M:%S  date_format=%m/%d/%Y %H:%M:%S
583
584    #Set SEL Time.
585    ${quoted_date}=  Fetch Date  ${datetime}
586
587    [Return]  ${quoted_date}  ${datetime}
588
589
590Set SEL Time Via IPMI
591    [Documentation]  Set SEL Time for given date using IPMI.
592    [Arguments]  ${date_time}
593
594    # Description of argument(s):
595    # ${date_time}       Can be any date in format %m/%d/%Y %H:%M:%S.
596
597    ${resp}=  Run IPMI Standard Command  sel time set "${date_time}"
598    Should Not Contain  ${resp}  Unspecified error
599
600
601Test Setup Execution
602    [Documentation]  Test Setup Execution.
603
604    Redfish.Login
605    # Change timesync mode to manual with timeout as per resource.robot.
606    Time Sync Mode Change Through Redfish   ${FALSE}
607    Sleep  ${NETWORK_TIMEOUT}
608
609
610Test Teardown Execution
611    [Documentation]  For execution of Test teardown.
612
613    Clear The SEL
614
615    # Change TimeSync mode to NTP with Timeout as per default resource.robot.
616    Time Sync Mode Change Through Redfish  ${TRUE}
617    Sleep  ${NETWORK_TIMEOUT}
618    Redfish.Logout
619    FFDC On Test Case Fail
620