1Installation Instructions 2************************* 3 4Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 52006, 2007 Free Software Foundation, Inc. 6 7This file is free documentation; the Free Software Foundation gives 8unlimited permission to copy, distribute and modify it. 9 10Basic Installation 11================== 12 13Briefly, the shell commands `./configure; make; make install' should 14configure, build, and install this package. The following 15more-detailed instructions are generic; see the `README' file for 16instructions specific to this package. 17 18 The `configure' shell script attempts to guess correct values for 19various system-dependent variables used during compilation. It uses 20those values to create a `Makefile' in each directory of the package. 21It may also create one or more `.h' files containing system-dependent 22definitions. Finally, it creates a shell script `config.status' that 23you can run in the future to recreate the current configuration, and a 24file `config.log' containing compiler output (useful mainly for 25debugging `configure'). 26 27 It can also use an optional file (typically called `config.cache' 28and enabled with `--cache-file=config.cache' or simply `-C') that saves 29the results of its tests to speed up reconfiguring. Caching is 30disabled by default to prevent problems with accidental use of stale 31cache files. 32 33 If you need to do unusual things to compile the package, please try 34to figure out how `configure' could check whether to do them, and mail 35diffs or instructions to the address given in the `README' so they can 36be considered for the next release. If you are using the cache, and at 37some point `config.cache' contains results you don't want to keep, you 38may remove or edit it. 39 40 The file `configure.ac' (or `configure.in') is used to create 41`configure' by a program called `autoconf'. You need `configure.ac' if 42you want to change it or regenerate `configure' using a newer version 43of `autoconf'. 44 45The simplest way to compile this package is: 46 47 1. `cd' to the directory containing the package's source code and type 48 `./configure' to configure the package for your system. 49 50 Running `configure' might take a while. While running, it prints 51 some messages telling which features it is checking for. 52 53 2. Type `make' to compile the package. 54 55 3. Optionally, type `make check' to run any self-tests that come with 56 the package. 57 58 4. Type `make install' to install the programs and any data files and 59 documentation. 60 61 5. You can remove the program binaries and object files from the 62 source code directory by typing `make clean'. To also remove the 63 files that `configure' created (so you can compile the package for 64 a different kind of computer), type `make distclean'. There is 65 also a `make maintainer-clean' target, but that is intended mainly 66 for the package's developers. If you use it, you may have to get 67 all sorts of other programs in order to regenerate files that came 68 with the distribution. 69 70 6. Often, you can also type `make uninstall' to remove the installed 71 files again. 72 73Compilers and Options 74===================== 75 76Some systems require unusual options for compilation or linking that the 77`configure' script does not know about. Run `./configure --help' for 78details on some of the pertinent environment variables. 79 80 You can give `configure' initial values for configuration parameters 81by setting variables in the command line or in the environment. Here 82is an example: 83 84 ./configure CC=c99 CFLAGS=-g LIBS=-lposix 85 86 *Note Defining Variables::, for more details. 87 88Compiling For Multiple Architectures 89==================================== 90 91You can compile the package for more than one kind of computer at the 92same time, by placing the object files for each architecture in their 93own directory. To do this, you can use GNU `make'. `cd' to the 94directory where you want the object files and executables to go and run 95the `configure' script. `configure' automatically checks for the 96source code in the directory that `configure' is in and in `..'. 97 98 With a non-GNU `make', it is safer to compile the package for one 99architecture at a time in the source code directory. After you have 100installed the package for one architecture, use `make distclean' before 101reconfiguring for another architecture. 102 103Installation Names 104================== 105 106By default, `make install' installs the package's commands under 107`/usr/local/bin', include files under `/usr/local/include', etc. You 108can specify an installation prefix other than `/usr/local' by giving 109`configure' the option `--prefix=PREFIX'. 110 111 You can specify separate installation prefixes for 112architecture-specific files and architecture-independent files. If you 113pass the option `--exec-prefix=PREFIX' to `configure', the package uses 114PREFIX as the prefix for installing programs and libraries. 115Documentation and other data files still use the regular prefix. 116 117 In addition, if you use an unusual directory layout you can give 118options like `--bindir=DIR' to specify different values for particular 119kinds of files. Run `configure --help' for a list of the directories 120you can set and what kinds of files go in them. 121 122 If the package supports it, you can cause programs to be installed 123with an extra prefix or suffix on their names by giving `configure' the 124option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. 125 126Optional Features 127================= 128 129Some packages pay attention to `--enable-FEATURE' options to 130`configure', where FEATURE indicates an optional part of the package. 131They may also pay attention to `--with-PACKAGE' options, where PACKAGE 132is something like `gnu-as' or `x' (for the X Window System). The 133`README' should mention any `--enable-' and `--with-' options that the 134package recognizes. 135 136 For packages that use the X Window System, `configure' can usually 137find the X include and library files automatically, but if it doesn't, 138you can use the `configure' options `--x-includes=DIR' and 139`--x-libraries=DIR' to specify their locations. 140 141Specifying the System Type 142========================== 143 144There may be some features `configure' cannot figure out automatically, 145but needs to determine by the type of machine the package will run on. 146Usually, assuming the package is built to be run on the _same_ 147architectures, `configure' can figure that out, but if it prints a 148message saying it cannot guess the machine type, give it the 149`--build=TYPE' option. TYPE can either be a short name for the system 150type, such as `sun4', or a canonical name which has the form: 151 152 CPU-COMPANY-SYSTEM 153 154where SYSTEM can have one of these forms: 155 156 OS KERNEL-OS 157 158 See the file `config.sub' for the possible values of each field. If 159`config.sub' isn't included in this package, then this package doesn't 160need to know the machine type. 161 162 If you are _building_ compiler tools for cross-compiling, you should 163use the option `--target=TYPE' to select the type of system they will 164produce code for. 165 166 If you want to _use_ a cross compiler, that generates code for a 167platform different from the build platform, you should specify the 168"host" platform (i.e., that on which the generated programs will 169eventually be run) with `--host=TYPE'. 170 171Sharing Defaults 172================ 173 174If you want to set default values for `configure' scripts to share, you 175can create a site shell script called `config.site' that gives default 176values for variables like `CC', `cache_file', and `prefix'. 177`configure' looks for `PREFIX/share/config.site' if it exists, then 178`PREFIX/etc/config.site' if it exists. Or, you can set the 179`CONFIG_SITE' environment variable to the location of the site script. 180A warning: not all `configure' scripts look for a site script. 181 182Defining Variables 183================== 184 185Variables not defined in a site shell script can be set in the 186environment passed to `configure'. However, some packages may run 187configure again during the build, and the customized values of these 188variables may be lost. In order to avoid this problem, you should set 189them in the `configure' command line, using `VAR=value'. For example: 190 191 ./configure CC=/usr/local2/bin/gcc 192 193causes the specified `gcc' to be used as the C compiler (unless it is 194overridden in the site shell script). 195 196Unfortunately, this technique does not work for `CONFIG_SHELL' due to 197an Autoconf bug. Until the bug is fixed you can use this workaround: 198 199 CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash 200 201`configure' Invocation 202====================== 203 204`configure' recognizes the following options to control how it operates. 205 206`--help' 207`-h' 208 Print a summary of the options to `configure', and exit. 209 210`--version' 211`-V' 212 Print the version of Autoconf used to generate the `configure' 213 script, and exit. 214 215`--cache-file=FILE' 216 Enable the cache: use and save the results of the tests in FILE, 217 traditionally `config.cache'. FILE defaults to `/dev/null' to 218 disable caching. 219 220`--config-cache' 221`-C' 222 Alias for `--cache-file=config.cache'. 223 224`--quiet' 225`--silent' 226`-q' 227 Do not print messages saying which checks are being made. To 228 suppress all normal output, redirect it to `/dev/null' (any error 229 messages will still be shown). 230 231`--srcdir=DIR' 232 Look for the package's source code in directory DIR. Usually 233 `configure' can determine that directory automatically. 234 235`configure' also accepts some other, not widely useful, options. Run 236`configure --help' for more details. 237 238