1 /* SPDX-License-Identifier: LGPL-2.1 OR MIT */ 2 3 /* 4 * RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the 5 * access-register mode nor the linkage stack this instruction will always 6 * cause a special-operation exception (the trap-enabled bit in the DUCT 7 * is and will stay 0). The instruction pattern is 8 * b2 ff 0f ff trap4 4095(%r0) 9 */ 10 #define RSEQ_SIG 0xB2FF0FFF 11 12 #define rseq_smp_mb() __asm__ __volatile__ ("bcr 15,0" ::: "memory") 13 #define rseq_smp_rmb() rseq_smp_mb() 14 #define rseq_smp_wmb() rseq_smp_mb() 15 16 #define rseq_smp_load_acquire(p) \ 17 __extension__ ({ \ 18 __typeof(*p) ____p1 = RSEQ_READ_ONCE(*p); \ 19 rseq_barrier(); \ 20 ____p1; \ 21 }) 22 23 #define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb() 24 25 #define rseq_smp_store_release(p, v) \ 26 do { \ 27 rseq_barrier(); \ 28 RSEQ_WRITE_ONCE(*p, v); \ 29 } while (0) 30 31 #ifdef __s390x__ 32 33 #define LONG_L "lg" 34 #define LONG_S "stg" 35 #define LONG_LT_R "ltgr" 36 #define LONG_CMP "cg" 37 #define LONG_CMP_R "cgr" 38 #define LONG_ADDI "aghi" 39 #define LONG_ADD_R "agr" 40 41 #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ 42 start_ip, post_commit_offset, abort_ip) \ 43 ".pushsection __rseq_cs, \"aw\"\n\t" \ 44 ".balign 32\n\t" \ 45 __rseq_str(label) ":\n\t" \ 46 ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ 47 ".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \ 48 ".popsection\n\t" \ 49 ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ 50 ".quad " __rseq_str(label) "b\n\t" \ 51 ".popsection\n\t" 52 53 /* 54 * Exit points of a rseq critical section consist of all instructions outside 55 * of the critical section where a critical section can either branch to or 56 * reach through the normal course of its execution. The abort IP and the 57 * post-commit IP are already part of the __rseq_cs section and should not be 58 * explicitly defined as additional exit points. Knowing all exit points is 59 * useful to assist debuggers stepping over the critical section. 60 */ 61 #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ 62 ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ 63 ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \ 64 ".popsection\n\t" 65 66 #elif __s390__ 67 68 #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \ 69 start_ip, post_commit_offset, abort_ip) \ 70 ".pushsection __rseq_cs, \"aw\"\n\t" \ 71 ".balign 32\n\t" \ 72 __rseq_str(label) ":\n\t" \ 73 ".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \ 74 ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \ 75 ".popsection\n\t" \ 76 ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \ 77 ".long 0x0, " __rseq_str(label) "b\n\t" \ 78 ".popsection\n\t" 79 80 /* 81 * Exit points of a rseq critical section consist of all instructions outside 82 * of the critical section where a critical section can either branch to or 83 * reach through the normal course of its execution. The abort IP and the 84 * post-commit IP are already part of the __rseq_cs section and should not be 85 * explicitly defined as additional exit points. Knowing all exit points is 86 * useful to assist debuggers stepping over the critical section. 87 */ 88 #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \ 89 ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \ 90 ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \ 91 ".popsection\n\t" 92 93 #define LONG_L "l" 94 #define LONG_S "st" 95 #define LONG_LT_R "ltr" 96 #define LONG_CMP "c" 97 #define LONG_CMP_R "cr" 98 #define LONG_ADDI "ahi" 99 #define LONG_ADD_R "ar" 100 101 #endif 102 103 #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \ 104 __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \ 105 (post_commit_ip - start_ip), abort_ip) 106 107 #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ 108 RSEQ_INJECT_ASM(1) \ 109 "larl %%r0, " __rseq_str(cs_label) "\n\t" \ 110 LONG_S " %%r0, %[" __rseq_str(rseq_cs) "]\n\t" \ 111 __rseq_str(label) ":\n\t" 112 113 #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ 114 RSEQ_INJECT_ASM(2) \ 115 "c %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ 116 "jnz " __rseq_str(label) "\n\t" 117 118 #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ 119 ".pushsection __rseq_failure, \"ax\"\n\t" \ 120 ".long " __rseq_str(RSEQ_SIG) "\n\t" \ 121 __rseq_str(label) ":\n\t" \ 122 teardown \ 123 "jg %l[" __rseq_str(abort_label) "]\n\t" \ 124 ".popsection\n\t" 125 126 #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \ 127 ".pushsection __rseq_failure, \"ax\"\n\t" \ 128 __rseq_str(label) ":\n\t" \ 129 teardown \ 130 "jg %l[" __rseq_str(cmpfail_label) "]\n\t" \ 131 ".popsection\n\t" 132 133 /* Per-cpu-id indexing. */ 134 135 #define RSEQ_TEMPLATE_CPU_ID 136 #define RSEQ_TEMPLATE_MO_RELAXED 137 #include "rseq-s390-bits.h" 138 #undef RSEQ_TEMPLATE_MO_RELAXED 139 140 #define RSEQ_TEMPLATE_MO_RELEASE 141 #include "rseq-s390-bits.h" 142 #undef RSEQ_TEMPLATE_MO_RELEASE 143 #undef RSEQ_TEMPLATE_CPU_ID 144 145 /* Per-mm-cid indexing. */ 146 147 #define RSEQ_TEMPLATE_MM_CID 148 #define RSEQ_TEMPLATE_MO_RELAXED 149 #include "rseq-s390-bits.h" 150 #undef RSEQ_TEMPLATE_MO_RELAXED 151 152 #define RSEQ_TEMPLATE_MO_RELEASE 153 #include "rseq-s390-bits.h" 154 #undef RSEQ_TEMPLATE_MO_RELEASE 155 #undef RSEQ_TEMPLATE_MM_CID 156 157 /* APIs which are not based on cpu ids. */ 158 159 #define RSEQ_TEMPLATE_CPU_ID_NONE 160 #define RSEQ_TEMPLATE_MO_RELAXED 161 #include "rseq-s390-bits.h" 162 #undef RSEQ_TEMPLATE_MO_RELAXED 163 #undef RSEQ_TEMPLATE_CPU_ID_NONE 164