1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3 4# +-----------------------+ +------------------------+ 5# | H1 (vrf) | | H2 (vrf) | 6# | + $h1.10 | | + $h2.10 | 7# | | 192.0.2.1/28 | | | 192.0.2.2/28 | 8# | | 2001:db8:1::1/64 | | | 2001:db8:1::2/64 | 9# | | | | | | 10# | | + $h1.20 | | | + $h2.20 | 11# | \ | 198.51.100.1/24 | | \ | 198.51.100.2/24 | 12# | \ | 2001:db8:2::1/64 | | \ | 2001:db8:2::2/64 | 13# | \| | | \| | 14# | + $h1 | | + $h2 | 15# +----|------------------+ +----|-------------------+ 16# | | 17# +----|--------------------------------------------------|-------------------+ 18# | SW | | | 19# | +--|--------------------------------------------------|-----------------+ | 20# | | + $swp1 BR0 (802.1q) + $swp2 | | 21# | | vid 10 vid 10 | | 22# | | vid 20 vid 20 | | 23# | | | | 24# | +-----------------------------------------------------------------------+ | 25# +---------------------------------------------------------------------------+ 26 27ALL_TESTS=" 28 cfg_test 29 fwd_test 30 ctrl_test 31" 32 33NUM_NETIFS=4 34source lib.sh 35source tc_common.sh 36 37h1_create() 38{ 39 simple_if_init $h1 40 vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64 41 vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64 42} 43 44h1_destroy() 45{ 46 vlan_destroy $h1 20 47 vlan_destroy $h1 10 48 simple_if_fini $h1 49} 50 51h2_create() 52{ 53 simple_if_init $h2 54 vlan_create $h2 10 v$h2 192.0.2.2/28 55 vlan_create $h2 20 v$h2 198.51.100.2/24 56} 57 58h2_destroy() 59{ 60 vlan_destroy $h2 20 61 vlan_destroy $h2 10 62 simple_if_fini $h2 63} 64 65switch_create() 66{ 67 ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \ 68 mcast_snooping 1 mcast_igmp_version 3 mcast_mld_version 2 69 bridge vlan add vid 10 dev br0 self 70 bridge vlan add vid 20 dev br0 self 71 ip link set dev br0 up 72 73 ip link set dev $swp1 master br0 74 ip link set dev $swp1 up 75 bridge vlan add vid 10 dev $swp1 76 bridge vlan add vid 20 dev $swp1 77 78 ip link set dev $swp2 master br0 79 ip link set dev $swp2 up 80 bridge vlan add vid 10 dev $swp2 81 bridge vlan add vid 20 dev $swp2 82 83 tc qdisc add dev br0 clsact 84 tc qdisc add dev $h2 clsact 85} 86 87switch_destroy() 88{ 89 tc qdisc del dev $h2 clsact 90 tc qdisc del dev br0 clsact 91 92 bridge vlan del vid 20 dev $swp2 93 bridge vlan del vid 10 dev $swp2 94 ip link set dev $swp2 down 95 ip link set dev $swp2 nomaster 96 97 bridge vlan del vid 20 dev $swp1 98 bridge vlan del vid 10 dev $swp1 99 ip link set dev $swp1 down 100 ip link set dev $swp1 nomaster 101 102 ip link set dev br0 down 103 bridge vlan del vid 20 dev br0 self 104 bridge vlan del vid 10 dev br0 self 105 ip link del dev br0 106} 107 108setup_prepare() 109{ 110 h1=${NETIFS[p1]} 111 swp1=${NETIFS[p2]} 112 113 swp2=${NETIFS[p3]} 114 h2=${NETIFS[p4]} 115 116 vrf_prepare 117 forwarding_enable 118 119 h1_create 120 h2_create 121 switch_create 122} 123 124cleanup() 125{ 126 pre_cleanup 127 128 switch_destroy 129 h2_destroy 130 h1_destroy 131 132 forwarding_restore 133 vrf_cleanup 134} 135 136cfg_test_host_common() 137{ 138 local name=$1; shift 139 local grp=$1; shift 140 local src=$1; shift 141 local state=$1; shift 142 local invalid_state=$1; shift 143 144 RET=0 145 146 # Check basic add, replace and delete behavior. 147 bridge mdb add dev br0 port br0 grp $grp $state vid 10 148 bridge mdb show dev br0 vid 10 | grep -q "$grp" 149 check_err $? "Failed to add $name host entry" 150 151 bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null 152 check_fail $? "Managed to replace $name host entry" 153 154 bridge mdb del dev br0 port br0 grp $grp $state vid 10 155 bridge mdb show dev br0 vid 10 | grep -q "$grp" 156 check_fail $? "Failed to delete $name host entry" 157 158 # Check error cases. 159 bridge mdb add dev br0 port br0 grp $grp $invalid_state vid 10 \ 160 &> /dev/null 161 check_fail $? "Managed to add $name host entry with a $invalid_state state" 162 163 bridge mdb add dev br0 port br0 grp $grp src $src $state vid 10 \ 164 &> /dev/null 165 check_fail $? "Managed to add $name host entry with a source" 166 167 bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ 168 filter_mode exclude &> /dev/null 169 check_fail $? "Managed to add $name host entry with a filter mode" 170 171 bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ 172 source_list $src &> /dev/null 173 check_fail $? "Managed to add $name host entry with a source list" 174 175 bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ 176 proto 123 &> /dev/null 177 check_fail $? "Managed to add $name host entry with a protocol" 178 179 log_test "Common host entries configuration tests ($name)" 180} 181 182# Check configuration of host entries from all types. 183cfg_test_host() 184{ 185 echo 186 log_info "# Host entries configuration tests" 187 188 cfg_test_host_common "IPv4" "239.1.1.1" "192.0.2.1" "temp" "permanent" 189 cfg_test_host_common "IPv6" "ff0e::1" "2001:db8:1::1" "temp" "permanent" 190 cfg_test_host_common "L2" "01:02:03:04:05:06" "00:00:00:00:00:01" \ 191 "permanent" "temp" 192} 193 194cfg_test_port_common() 195{ 196 local name=$1;shift 197 local grp_key=$1; shift 198 199 RET=0 200 201 # Check basic add, replace and delete behavior. 202 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 203 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" 204 check_err $? "Failed to add $name entry" 205 206 bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \ 207 &> /dev/null 208 check_err $? "Failed to replace $name entry" 209 210 bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 211 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" 212 check_fail $? "Failed to delete $name entry" 213 214 # Check default protocol and replacement. 215 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 216 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "static" 217 check_err $? "$name entry not added with default \"static\" protocol" 218 219 bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \ 220 proto 123 221 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "123" 222 check_err $? "Failed to replace protocol of $name entry" 223 bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 224 225 # Check behavior when VLAN is not specified. 226 bridge mdb add dev br0 port $swp1 $grp_key permanent 227 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" 228 check_err $? "$name entry with VLAN 10 not added when VLAN was not specified" 229 bridge mdb show dev br0 vid 20 | grep -q "$grp_key" 230 check_err $? "$name entry with VLAN 20 not added when VLAN was not specified" 231 232 bridge mdb del dev br0 port $swp1 $grp_key permanent 233 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" 234 check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified" 235 bridge mdb show dev br0 vid 20 | grep -q "$grp_key" 236 check_fail $? "$name entry with VLAN 20 not deleted when VLAN was not specified" 237 238 # Check behavior when bridge port is down. 239 ip link set dev $swp1 down 240 241 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 242 check_err $? "Failed to add $name permanent entry when bridge port is down" 243 244 bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 245 246 bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 &> /dev/null 247 check_fail $? "Managed to add $name temporary entry when bridge port is down" 248 249 ip link set dev $swp1 up 250 setup_wait_dev $swp1 251 252 # Check error cases. 253 ip link set dev br0 down 254 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 \ 255 &> /dev/null 256 check_fail $? "Managed to add $name entry when bridge is down" 257 ip link set dev br0 up 258 259 ip link set dev br0 type bridge mcast_snooping 0 260 bridge mdb add dev br0 port $swp1 $grp_key permanent vid \ 261 10 &> /dev/null 262 check_fail $? "Managed to add $name entry when multicast snooping is disabled" 263 ip link set dev br0 type bridge mcast_snooping 1 264 265 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 5000 \ 266 &> /dev/null 267 check_fail $? "Managed to add $name entry with an invalid VLAN" 268 269 log_test "Common port group entries configuration tests ($name)" 270} 271 272src_list_create() 273{ 274 local src_prefix=$1; shift 275 local num_srcs=$1; shift 276 local src_list 277 local i 278 279 for i in $(seq 1 $num_srcs); do 280 src_list=${src_list},${src_prefix}${i} 281 done 282 283 echo $src_list | cut -c 2- 284} 285 286__cfg_test_port_ip_star_g() 287{ 288 local name=$1; shift 289 local grp=$1; shift 290 local invalid_grp=$1; shift 291 local src_prefix=$1; shift 292 local src1=${src_prefix}1 293 local src2=${src_prefix}2 294 local src3=${src_prefix}3 295 local max_srcs=31 296 local num_srcs 297 298 RET=0 299 300 bridge mdb add dev br0 port $swp1 grp $grp vid 10 301 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "exclude" 302 check_err $? "Default filter mode is not \"exclude\"" 303 bridge mdb del dev br0 port $swp1 grp $grp vid 10 304 305 # Check basic add and delete behavior. 306 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ 307 source_list $src1 308 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src" 309 check_err $? "(*, G) entry not created" 310 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" 311 check_err $? "(S, G) entry not created" 312 bridge mdb del dev br0 port $swp1 grp $grp vid 10 313 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src" 314 check_fail $? "(*, G) entry not deleted" 315 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" 316 check_fail $? "(S, G) entry not deleted" 317 318 ## State (permanent / temp) tests. 319 320 # Check that group and source timer are not set for permanent entries. 321 bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ 322 filter_mode exclude source_list $src1 323 324 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 325 grep -q "permanent" 326 check_err $? "(*, G) entry not added as \"permanent\" when should" 327 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 328 grep -q "permanent" 329 check_err $? "(S, G) entry not added as \"permanent\" when should" 330 331 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 332 grep -q " 0.00" 333 check_err $? "(*, G) \"permanent\" entry has a pending group timer" 334 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 335 grep -q "\/0.00" 336 check_err $? "\"permanent\" source entry has a pending source timer" 337 338 bridge mdb del dev br0 port $swp1 grp $grp vid 10 339 340 # Check that group timer is set for temporary (*, G) EXCLUDE, but not 341 # the source timer. 342 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 343 filter_mode exclude source_list $src1 344 345 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 346 grep -q "temp" 347 check_err $? "(*, G) EXCLUDE entry not added as \"temp\" when should" 348 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 349 grep -q "temp" 350 check_err $? "(S, G) \"blocked\" entry not added as \"temp\" when should" 351 352 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 353 grep -q " 0.00" 354 check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer" 355 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 356 grep -q "\/0.00" 357 check_err $? "\"blocked\" source entry has a pending source timer" 358 359 bridge mdb del dev br0 port $swp1 grp $grp vid 10 360 361 # Check that group timer is not set for temporary (*, G) INCLUDE, but 362 # that the source timer is set. 363 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 364 filter_mode include source_list $src1 365 366 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 367 grep -q "temp" 368 check_err $? "(*, G) INCLUDE entry not added as \"temp\" when should" 369 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 370 grep -q "temp" 371 check_err $? "(S, G) entry not added as \"temp\" when should" 372 373 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 374 grep -q " 0.00" 375 check_err $? "(*, G) INCLUDE entry has a pending group timer" 376 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 377 grep -q "\/0.00" 378 check_fail $? "Source entry does not have a pending source timer" 379 380 bridge mdb del dev br0 port $swp1 grp $grp vid 10 381 382 # Check that group timer is never set for (S, G) entries. 383 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 384 filter_mode include source_list $src1 385 386 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 387 grep -q " 0.00" 388 check_err $? "(S, G) entry has a pending group timer" 389 390 bridge mdb del dev br0 port $swp1 grp $grp vid 10 391 392 ## Filter mode (include / exclude) tests. 393 394 # Check that (*, G) INCLUDE entries are added with correct filter mode 395 # and that (S, G) entries are not marked as "blocked". 396 bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ 397 filter_mode include source_list $src1 398 399 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 400 grep -q "include" 401 check_err $? "(*, G) INCLUDE not added with \"include\" filter mode" 402 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 403 grep -q "blocked" 404 check_fail $? "(S, G) entry marked as \"blocked\" when should not" 405 406 bridge mdb del dev br0 port $swp1 grp $grp vid 10 407 408 # Check that (*, G) EXCLUDE entries are added with correct filter mode 409 # and that (S, G) entries are marked as "blocked". 410 bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ 411 filter_mode exclude source_list $src1 412 413 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 414 grep -q "exclude" 415 check_err $? "(*, G) EXCLUDE not added with \"exclude\" filter mode" 416 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 417 grep -q "blocked" 418 check_err $? "(S, G) entry not marked as \"blocked\" when should" 419 420 bridge mdb del dev br0 port $swp1 grp $grp vid 10 421 422 ## Protocol tests. 423 424 # Check that (*, G) and (S, G) entries are added with the specified 425 # protocol. 426 bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ 427 filter_mode exclude source_list $src1 proto zebra 428 429 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 430 grep -q "zebra" 431 check_err $? "(*, G) entry not added with \"zebra\" protocol" 432 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 433 grep -q "zebra" 434 check_err $? "(S, G) entry not marked added with \"zebra\" protocol" 435 436 bridge mdb del dev br0 port $swp1 grp $grp vid 10 437 438 ## Replace tests. 439 440 # Check that state can be modified. 441 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 442 filter_mode exclude source_list $src1 443 444 bridge mdb replace dev br0 port $swp1 grp $grp permanent vid 10 \ 445 filter_mode exclude source_list $src1 446 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 447 grep -q "permanent" 448 check_err $? "(*, G) entry not marked as \"permanent\" after replace" 449 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 450 grep -q "permanent" 451 check_err $? "(S, G) entry not marked as \"permanent\" after replace" 452 453 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 454 filter_mode exclude source_list $src1 455 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 456 grep -q "temp" 457 check_err $? "(*, G) entry not marked as \"temp\" after replace" 458 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 459 grep -q "temp" 460 check_err $? "(S, G) entry not marked as \"temp\" after replace" 461 462 bridge mdb del dev br0 port $swp1 grp $grp vid 10 463 464 # Check that filter mode can be modified. 465 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 466 filter_mode exclude source_list $src1 467 468 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 469 filter_mode include source_list $src1 470 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 471 grep -q "include" 472 check_err $? "(*, G) not marked with \"include\" filter mode after replace" 473 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 474 grep -q "blocked" 475 check_fail $? "(S, G) marked as \"blocked\" after replace" 476 477 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 478 filter_mode exclude source_list $src1 479 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 480 grep -q "exclude" 481 check_err $? "(*, G) not marked with \"exclude\" filter mode after replace" 482 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 483 grep -q "blocked" 484 check_err $? "(S, G) not marked as \"blocked\" after replace" 485 486 bridge mdb del dev br0 port $swp1 grp $grp vid 10 487 488 # Check that sources can be added to and removed from the source list. 489 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 490 filter_mode exclude source_list $src1 491 492 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 493 filter_mode exclude source_list $src1,$src2,$src3 494 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" 495 check_err $? "(S, G) entry for source $src1 not created after replace" 496 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2" 497 check_err $? "(S, G) entry for source $src2 not created after replace" 498 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3" 499 check_err $? "(S, G) entry for source $src3 not created after replace" 500 501 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 502 filter_mode exclude source_list $src1,$src3 503 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" 504 check_err $? "(S, G) entry for source $src1 not created after second replace" 505 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2" 506 check_fail $? "(S, G) entry for source $src2 created after second replace" 507 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3" 508 check_err $? "(S, G) entry for source $src3 not created after second replace" 509 510 bridge mdb del dev br0 port $swp1 grp $grp vid 10 511 512 # Check that protocol can be modified. 513 bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ 514 filter_mode exclude source_list $src1 proto zebra 515 516 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ 517 filter_mode exclude source_list $src1 proto bgp 518 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ 519 grep -q "bgp" 520 check_err $? "(*, G) protocol not changed to \"bgp\" after replace" 521 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ 522 grep -q "bgp" 523 check_err $? "(S, G) protocol not changed to \"bgp\" after replace" 524 525 bridge mdb del dev br0 port $swp1 grp $grp vid 10 526 527 ## Star exclude tests. 528 529 # Check star exclude functionality. When adding a new EXCLUDE (*, G), 530 # it needs to be also added to all (S, G) entries for proper 531 # replication. 532 bridge mdb add dev br0 port $swp2 grp $grp vid 10 \ 533 filter_mode include source_list $src1 534 bridge mdb add dev br0 port $swp1 grp $grp vid 10 535 bridge -d mdb show dev br0 vid 10 | grep "$swp1" | grep "$grp" | \ 536 grep "$src1" | grep -q "added_by_star_ex" 537 check_err $? "\"added_by_star_ex\" entry not created after adding (*, G) entry" 538 bridge mdb del dev br0 port $swp1 grp $grp vid 10 539 bridge mdb del dev br0 port $swp2 grp $grp src $src1 vid 10 540 541 ## Error cases tests. 542 543 bridge mdb add dev br0 port $swp1 grp $invalid_grp vid 10 &> /dev/null 544 check_fail $? "Managed to add an entry with an invalid group" 545 546 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ 547 &> /dev/null 548 check_fail $? "Managed to add an INCLUDE entry with an empty source list" 549 550 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ 551 source_list $grp &> /dev/null 552 check_fail $? "Managed to add an entry with an invalid source in source list" 553 554 bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ 555 source_list $src &> /dev/null 556 check_fail $? "Managed to add an entry with a source list and no filter mode" 557 558 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ 559 source_list $src1 560 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ 561 source_list $src1 &> /dev/null 562 check_fail $? "Managed to replace an entry without using replace" 563 bridge mdb del dev br0 port $swp1 grp $grp vid 10 564 565 bridge mdb add dev br0 port $swp1 grp $grp src $src2 vid 10 566 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ 567 source_list $src1,$src2,$src3 &> /dev/null 568 check_fail $? "Managed to add a source that already has a forwarding entry" 569 bridge mdb del dev br0 port $swp1 grp $grp src $src2 vid 10 570 571 # Check maximum number of sources. 572 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ 573 source_list $(src_list_create $src_prefix $max_srcs) 574 num_srcs=$(bridge -d mdb show dev br0 vid 10 | grep "$grp" | \ 575 grep "src" | wc -l) 576 [[ $num_srcs -eq $max_srcs ]] 577 check_err $? "Failed to configure maximum number of sources ($max_srcs)" 578 bridge mdb del dev br0 port $swp1 grp $grp vid 10 579 580 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ 581 source_list $(src_list_create $src_prefix $((max_srcs + 1))) \ 582 &> /dev/null 583 check_fail $? "Managed to exceed maximum number of sources ($max_srcs)" 584 585 log_test "$name (*, G) port group entries configuration tests" 586} 587 588cfg_test_port_ip_star_g() 589{ 590 echo 591 log_info "# Port group entries configuration tests - (*, G)" 592 593 cfg_test_port_common "IPv4 (*, G)" "grp 239.1.1.1" 594 cfg_test_port_common "IPv6 (*, G)" "grp ff0e::1" 595 __cfg_test_port_ip_star_g "IPv4" "239.1.1.1" "224.0.0.1" "192.0.2." 596 __cfg_test_port_ip_star_g "IPv6" "ff0e::1" "ff02::1" "2001:db8:1::" 597} 598 599__cfg_test_port_ip_sg() 600{ 601 local name=$1; shift 602 local grp=$1; shift 603 local src=$1; shift 604 local grp_key="grp $grp src $src" 605 606 RET=0 607 608 bridge mdb add dev br0 port $swp1 $grp_key vid 10 609 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "include" 610 check_err $? "Default filter mode is not \"include\"" 611 bridge mdb del dev br0 port $swp1 $grp_key vid 10 612 613 # Check that entries can be added as both permanent and temp and that 614 # group timer is set correctly. 615 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 616 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ 617 grep -q "permanent" 618 check_err $? "Entry not added as \"permanent\" when should" 619 bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ 620 grep -q "0.00" 621 check_err $? "\"permanent\" entry has a pending group timer" 622 bridge mdb del dev br0 port $swp1 $grp_key vid 10 623 624 bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 625 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ 626 grep -q "temp" 627 check_err $? "Entry not added as \"temp\" when should" 628 bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ 629 grep -q "0.00" 630 check_fail $? "\"temp\" entry has an unpending group timer" 631 bridge mdb del dev br0 port $swp1 $grp_key vid 10 632 633 # Check error cases. 634 bridge mdb add dev br0 port $swp1 $grp_key vid 10 \ 635 filter_mode include &> /dev/null 636 check_fail $? "Managed to add an entry with a filter mode" 637 638 bridge mdb add dev br0 port $swp1 $grp_key vid 10 \ 639 filter_mode include source_list $src &> /dev/null 640 check_fail $? "Managed to add an entry with a source list" 641 642 bridge mdb add dev br0 port $swp1 grp $grp src $grp vid 10 &> /dev/null 643 check_fail $? "Managed to add an entry with an invalid source" 644 645 bridge mdb add dev br0 port $swp1 $grp_key vid 10 temp 646 bridge mdb add dev br0 port $swp1 $grp_key vid 10 permanent &> /dev/null 647 check_fail $? "Managed to replace an entry without using replace" 648 bridge mdb del dev br0 port $swp1 $grp_key vid 10 649 650 # Check that we can replace available attributes. 651 bridge mdb add dev br0 port $swp1 $grp_key vid 10 proto 123 652 bridge mdb replace dev br0 port $swp1 $grp_key vid 10 proto 111 653 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ 654 grep -q "111" 655 check_err $? "Failed to replace protocol" 656 657 bridge mdb replace dev br0 port $swp1 $grp_key vid 10 permanent 658 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ 659 grep -q "permanent" 660 check_err $? "Entry not marked as \"permanent\" after replace" 661 bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ 662 grep -q "0.00" 663 check_err $? "Entry has a pending group timer after replace" 664 665 bridge mdb replace dev br0 port $swp1 $grp_key vid 10 temp 666 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ 667 grep -q "temp" 668 check_err $? "Entry not marked as \"temp\" after replace" 669 bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ 670 grep -q "0.00" 671 check_fail $? "Entry has an unpending group timer after replace" 672 bridge mdb del dev br0 port $swp1 $grp_key vid 10 673 674 # Check star exclude functionality. When adding a (S, G), all matching 675 # (*, G) ports need to be added to it. 676 bridge mdb add dev br0 port $swp2 grp $grp vid 10 677 bridge mdb add dev br0 port $swp1 $grp_key vid 10 678 bridge mdb show dev br0 vid 10 | grep "$grp_key" | grep $swp2 | \ 679 grep -q "added_by_star_ex" 680 check_err $? "\"added_by_star_ex\" entry not created after adding (S, G) entry" 681 bridge mdb del dev br0 port $swp1 $grp_key vid 10 682 bridge mdb del dev br0 port $swp2 grp $grp vid 10 683 684 log_test "$name (S, G) port group entries configuration tests" 685} 686 687cfg_test_port_ip_sg() 688{ 689 echo 690 log_info "# Port group entries configuration tests - (S, G)" 691 692 cfg_test_port_common "IPv4 (S, G)" "grp 239.1.1.1 src 192.0.2.1" 693 cfg_test_port_common "IPv6 (S, G)" "grp ff0e::1 src 2001:db8:1::1" 694 __cfg_test_port_ip_sg "IPv4" "239.1.1.1" "192.0.2.1" 695 __cfg_test_port_ip_sg "IPv6" "ff0e::1" "2001:db8:1::1" 696} 697 698cfg_test_port_ip() 699{ 700 cfg_test_port_ip_star_g 701 cfg_test_port_ip_sg 702} 703 704__cfg_test_port_l2() 705{ 706 local grp="01:02:03:04:05:06" 707 708 RET=0 709 710 bridge meb add dev br0 port $swp grp 00:01:02:03:04:05 \ 711 permanent vid 10 &> /dev/null 712 check_fail $? "Managed to add an entry with unicast MAC" 713 714 bridge mdb add dev br0 port $swp grp $grp src 00:01:02:03:04:05 \ 715 permanent vid 10 &> /dev/null 716 check_fail $? "Managed to add an entry with a source" 717 718 bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ 719 filter_mode include &> /dev/null 720 check_fail $? "Managed to add an entry with a filter mode" 721 722 bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ 723 source_list 00:01:02:03:04:05 &> /dev/null 724 check_fail $? "Managed to add an entry with a source list" 725 726 log_test "L2 (*, G) port group entries configuration tests" 727} 728 729cfg_test_port_l2() 730{ 731 echo 732 log_info "# Port group entries configuration tests - L2" 733 734 cfg_test_port_common "L2 (*, G)" "grp 01:02:03:04:05:06" 735 __cfg_test_port_l2 736} 737 738# Check configuration of regular (port) entries of all types. 739cfg_test_port() 740{ 741 cfg_test_port_ip 742 cfg_test_port_l2 743} 744 745cfg_test() 746{ 747 cfg_test_host 748 cfg_test_port 749} 750 751__fwd_test_host_ip() 752{ 753 local grp=$1; shift 754 local src=$1; shift 755 local mode=$1; shift 756 local name 757 local eth_type 758 759 RET=0 760 761 if [[ $mode == "-4" ]]; then 762 name="IPv4" 763 eth_type="ipv4" 764 else 765 name="IPv6" 766 eth_type="ipv6" 767 fi 768 769 tc filter add dev br0 ingress protocol 802.1q pref 1 handle 1 flower \ 770 vlan_ethtype $eth_type vlan_id 10 dst_ip $grp src_ip $src \ 771 action drop 772 773 # Packet should only be flooded to multicast router ports when there is 774 # no matching MDB entry. The bridge is not configured as a multicast 775 # router port. 776 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q 777 tc_check_packets "dev br0 ingress" 1 0 778 check_err $? "Packet locally received after flood" 779 780 # Install a regular port group entry and expect the packet to not be 781 # locally received. 782 bridge mdb add dev br0 port $swp2 grp $grp temp vid 10 783 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q 784 tc_check_packets "dev br0 ingress" 1 0 785 check_err $? "Packet locally received after installing a regular entry" 786 787 # Add a host entry and expect the packet to be locally received. 788 bridge mdb add dev br0 port br0 grp $grp temp vid 10 789 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q 790 tc_check_packets "dev br0 ingress" 1 1 791 check_err $? "Packet not locally received after adding a host entry" 792 793 # Remove the host entry and expect the packet to not be locally 794 # received. 795 bridge mdb del dev br0 port br0 grp $grp vid 10 796 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q 797 tc_check_packets "dev br0 ingress" 1 1 798 check_err $? "Packet locally received after removing a host entry" 799 800 bridge mdb del dev br0 port $swp2 grp $grp vid 10 801 802 tc filter del dev br0 ingress protocol 802.1q pref 1 handle 1 flower 803 804 log_test "$name host entries forwarding tests" 805} 806 807fwd_test_host_ip() 808{ 809 __fwd_test_host_ip "239.1.1.1" "192.0.2.1" "-4" 810 __fwd_test_host_ip "ff0e::1" "2001:db8:1::1" "-6" 811} 812 813fwd_test_host_l2() 814{ 815 local dmac=01:02:03:04:05:06 816 817 RET=0 818 819 tc filter add dev br0 ingress protocol all pref 1 handle 1 flower \ 820 dst_mac $dmac action drop 821 822 # Packet should be flooded and locally received when there is no 823 # matching MDB entry. 824 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 825 tc_check_packets "dev br0 ingress" 1 1 826 check_err $? "Packet not locally received after flood" 827 828 # Install a regular port group entry and expect the packet to not be 829 # locally received. 830 bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10 831 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 832 tc_check_packets "dev br0 ingress" 1 1 833 check_err $? "Packet locally received after installing a regular entry" 834 835 # Add a host entry and expect the packet to be locally received. 836 bridge mdb add dev br0 port br0 grp $dmac permanent vid 10 837 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 838 tc_check_packets "dev br0 ingress" 1 2 839 check_err $? "Packet not locally received after adding a host entry" 840 841 # Remove the host entry and expect the packet to not be locally 842 # received. 843 bridge mdb del dev br0 port br0 grp $dmac permanent vid 10 844 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 845 tc_check_packets "dev br0 ingress" 1 2 846 check_err $? "Packet locally received after removing a host entry" 847 848 bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10 849 850 tc filter del dev br0 ingress protocol all pref 1 handle 1 flower 851 852 log_test "L2 host entries forwarding tests" 853} 854 855fwd_test_host() 856{ 857 # Disable multicast router on the bridge to ensure that packets are 858 # only locally received when a matching host entry is present. 859 ip link set dev br0 type bridge mcast_router 0 860 861 fwd_test_host_ip 862 fwd_test_host_l2 863 864 ip link set dev br0 type bridge mcast_router 1 865} 866 867__fwd_test_port_ip() 868{ 869 local grp=$1; shift 870 local valid_src=$1; shift 871 local invalid_src=$1; shift 872 local mode=$1; shift 873 local filter_mode=$1; shift 874 local name 875 local eth_type 876 local src_list 877 878 RET=0 879 880 if [[ $mode == "-4" ]]; then 881 name="IPv4" 882 eth_type="ipv4" 883 else 884 name="IPv6" 885 eth_type="ipv6" 886 fi 887 888 # The valid source is the one we expect to get packets from after 889 # adding the entry. 890 if [[ $filter_mode == "include" ]]; then 891 src_list=$valid_src 892 else 893 src_list=$invalid_src 894 fi 895 896 tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 1 flower \ 897 vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \ 898 src_ip $valid_src action drop 899 tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 2 flower \ 900 vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \ 901 src_ip $invalid_src action drop 902 903 $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q 904 tc_check_packets "dev $h2 ingress" 1 0 905 check_err $? "Packet from valid source received on H2 before adding entry" 906 907 $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q 908 tc_check_packets "dev $h2 ingress" 2 0 909 check_err $? "Packet from invalid source received on H2 before adding entry" 910 911 bridge mdb add dev br0 port $swp2 grp $grp vid 10 \ 912 filter_mode $filter_mode source_list $src_list 913 914 $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q 915 tc_check_packets "dev $h2 ingress" 1 1 916 check_err $? "Packet from valid source not received on H2 after adding entry" 917 918 $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q 919 tc_check_packets "dev $h2 ingress" 2 0 920 check_err $? "Packet from invalid source received on H2 after adding entry" 921 922 bridge mdb replace dev br0 port $swp2 grp $grp vid 10 \ 923 filter_mode exclude 924 925 $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q 926 tc_check_packets "dev $h2 ingress" 1 2 927 check_err $? "Packet from valid source not received on H2 after allowing all sources" 928 929 $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q 930 tc_check_packets "dev $h2 ingress" 2 1 931 check_err $? "Packet from invalid source not received on H2 after allowing all sources" 932 933 bridge mdb del dev br0 port $swp2 grp $grp vid 10 934 935 $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q 936 tc_check_packets "dev $h2 ingress" 1 2 937 check_err $? "Packet from valid source received on H2 after deleting entry" 938 939 $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q 940 tc_check_packets "dev $h2 ingress" 2 1 941 check_err $? "Packet from invalid source received on H2 after deleting entry" 942 943 tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 2 flower 944 tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 1 flower 945 946 log_test "$name port group \"$filter_mode\" entries forwarding tests" 947} 948 949fwd_test_port_ip() 950{ 951 __fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "exclude" 952 __fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \ 953 "exclude" 954 __fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "include" 955 __fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \ 956 "include" 957} 958 959fwd_test_port_l2() 960{ 961 local dmac=01:02:03:04:05:06 962 963 RET=0 964 965 tc filter add dev $h2 ingress protocol all pref 1 handle 1 flower \ 966 dst_mac $dmac action drop 967 968 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 969 tc_check_packets "dev $h2 ingress" 1 0 970 check_err $? "Packet received on H2 before adding entry" 971 972 bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10 973 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 974 tc_check_packets "dev $h2 ingress" 1 1 975 check_err $? "Packet not received on H2 after adding entry" 976 977 bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10 978 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q 979 tc_check_packets "dev $h2 ingress" 1 1 980 check_err $? "Packet received on H2 after deleting entry" 981 982 tc filter del dev $h2 ingress protocol all pref 1 handle 1 flower 983 984 log_test "L2 port entries forwarding tests" 985} 986 987fwd_test_port() 988{ 989 # Disable multicast flooding to ensure that packets are only forwarded 990 # out of a port when a matching port group entry is present. 991 bridge link set dev $swp2 mcast_flood off 992 993 fwd_test_port_ip 994 fwd_test_port_l2 995 996 bridge link set dev $swp2 mcast_flood on 997} 998 999fwd_test() 1000{ 1001 echo 1002 log_info "# Forwarding tests" 1003 1004 # Forwarding according to MDB entries only takes place when the bridge 1005 # detects that there is a valid querier in the network. Set the bridge 1006 # as the querier and assign it a valid IPv6 link-local address to be 1007 # used as the source address for MLD queries. 1008 ip -6 address add fe80::1/64 nodad dev br0 1009 ip link set dev br0 type bridge mcast_querier 1 1010 # Wait the default Query Response Interval (10 seconds) for the bridge 1011 # to determine that there are no other queriers in the network. 1012 sleep 10 1013 1014 fwd_test_host 1015 fwd_test_port 1016 1017 ip link set dev br0 type bridge mcast_querier 0 1018 ip -6 address del fe80::1/64 dev br0 1019} 1020 1021igmpv3_is_in_get() 1022{ 1023 local igmpv3 1024 1025 igmpv3=$(: 1026 )"22:"$( : Type - Membership Report 1027 )"00:"$( : Reserved 1028 )"2a:f8:"$( : Checksum 1029 )"00:00:"$( : Reserved 1030 )"00:01:"$( : Number of Group Records 1031 )"01:"$( : Record Type - IS_IN 1032 )"00:"$( : Aux Data Len 1033 )"00:01:"$( : Number of Sources 1034 )"ef:01:01:01:"$( : Multicast Address - 239.1.1.1 1035 )"c0:00:02:02"$( : Source Address - 192.0.2.2 1036 ) 1037 1038 echo $igmpv3 1039} 1040 1041ctrl_igmpv3_is_in_test() 1042{ 1043 RET=0 1044 1045 # Add a permanent entry and check that it is not affected by the 1046 # received IGMP packet. 1047 bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 \ 1048 filter_mode include source_list 192.0.2.1 1049 1050 # IS_IN ( 192.0.2.2 ) 1051 $MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \ 1052 -t ip proto=2,p=$(igmpv3_is_in_get) -q 1053 1054 bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -q 192.0.2.2 1055 check_fail $? "Permanent entry affected by IGMP packet" 1056 1057 # Replace the permanent entry with a temporary one and check that after 1058 # processing the IGMP packet, a new source is added to the list along 1059 # with a new forwarding entry. 1060 bridge mdb replace dev br0 port $swp1 grp 239.1.1.1 temp vid 10 \ 1061 filter_mode include source_list 192.0.2.1 1062 1063 # IS_IN ( 192.0.2.2 ) 1064 $MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \ 1065 -t ip proto=2,p=$(igmpv3_is_in_get) -q 1066 1067 bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -v "src" | \ 1068 grep -q 192.0.2.2 1069 check_err $? "Source not add to source list" 1070 1071 bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | \ 1072 grep -q "src 192.0.2.2" 1073 check_err $? "(S, G) entry not created for new source" 1074 1075 bridge mdb del dev br0 port $swp1 grp 239.1.1.1 vid 10 1076 1077 log_test "IGMPv3 MODE_IS_INCLUE tests" 1078} 1079 1080mldv2_is_in_get() 1081{ 1082 local hbh 1083 local icmpv6 1084 1085 hbh=$(: 1086 )"3a:"$( : Next Header - ICMPv6 1087 )"00:"$( : Hdr Ext Len 1088 )"00:00:00:00:00:00:"$( : Options and Padding 1089 ) 1090 1091 icmpv6=$(: 1092 )"8f:"$( : Type - MLDv2 Report 1093 )"00:"$( : Code 1094 )"45:39:"$( : Checksum 1095 )"00:00:"$( : Reserved 1096 )"00:01:"$( : Number of Group Records 1097 )"01:"$( : Record Type - IS_IN 1098 )"00:"$( : Aux Data Len 1099 )"00:01:"$( : Number of Sources 1100 )"ff:0e:00:00:00:00:00:00:"$( : Multicast address - ff0e::1 1101 )"00:00:00:00:00:00:00:01:"$( : 1102 )"20:01:0d:b8:00:01:00:00:"$( : Source Address - 2001:db8:1::2 1103 )"00:00:00:00:00:00:00:02:"$( : 1104 ) 1105 1106 echo ${hbh}${icmpv6} 1107} 1108 1109ctrl_mldv2_is_in_test() 1110{ 1111 RET=0 1112 1113 # Add a permanent entry and check that it is not affected by the 1114 # received MLD packet. 1115 bridge mdb add dev br0 port $swp1 grp ff0e::1 permanent vid 10 \ 1116 filter_mode include source_list 2001:db8:1::1 1117 1118 # IS_IN ( 2001:db8:1::2 ) 1119 $MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \ 1120 -t ip hop=1,next=0,p=$(mldv2_is_in_get) -q 1121 1122 bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \ 1123 grep -q 2001:db8:1::2 1124 check_fail $? "Permanent entry affected by MLD packet" 1125 1126 # Replace the permanent entry with a temporary one and check that after 1127 # processing the MLD packet, a new source is added to the list along 1128 # with a new forwarding entry. 1129 bridge mdb replace dev br0 port $swp1 grp ff0e::1 temp vid 10 \ 1130 filter_mode include source_list 2001:db8:1::1 1131 1132 # IS_IN ( 2001:db8:1::2 ) 1133 $MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \ 1134 -t ip hop=1,next=0,p=$(mldv2_is_in_get) -q 1135 1136 bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | grep -v "src" | \ 1137 grep -q 2001:db8:1::2 1138 check_err $? "Source not add to source list" 1139 1140 bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \ 1141 grep -q "src 2001:db8:1::2" 1142 check_err $? "(S, G) entry not created for new source" 1143 1144 bridge mdb del dev br0 port $swp1 grp ff0e::1 vid 10 1145 1146 log_test "MLDv2 MODE_IS_INCLUDE tests" 1147} 1148 1149ctrl_test() 1150{ 1151 echo 1152 log_info "# Control packets tests" 1153 1154 ctrl_igmpv3_is_in_test 1155 ctrl_mldv2_is_in_test 1156} 1157 1158trap cleanup EXIT 1159 1160setup_prepare 1161setup_wait 1162tests_run 1163 1164exit $EXIT_STATUS 1165