1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3 4# This test is for checking IPv4 and IPv6 FIB behavior in response to 5# different events. 6 7ret=0 8# Kselftest framework requirement - SKIP code is 4. 9ksft_skip=4 10 11# all tests in this script. Can be overridden with -t option 12TESTS="unregister down carrier nexthop suppress ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr" 13 14VERBOSE=0 15PAUSE_ON_FAIL=no 16PAUSE=no 17IP="ip -netns ns1" 18NS_EXEC="ip netns exec ns1" 19 20which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) 21 22log_test() 23{ 24 local rc=$1 25 local expected=$2 26 local msg="$3" 27 28 if [ ${rc} -eq ${expected} ]; then 29 printf " TEST: %-60s [ OK ]\n" "${msg}" 30 nsuccess=$((nsuccess+1)) 31 else 32 ret=1 33 nfail=$((nfail+1)) 34 printf " TEST: %-60s [FAIL]\n" "${msg}" 35 if [ "${PAUSE_ON_FAIL}" = "yes" ]; then 36 echo 37 echo "hit enter to continue, 'q' to quit" 38 read a 39 [ "$a" = "q" ] && exit 1 40 fi 41 fi 42 43 if [ "${PAUSE}" = "yes" ]; then 44 echo 45 echo "hit enter to continue, 'q' to quit" 46 read a 47 [ "$a" = "q" ] && exit 1 48 fi 49} 50 51setup() 52{ 53 set -e 54 ip netns add ns1 55 ip netns set ns1 auto 56 $IP link set dev lo up 57 ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1 58 ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1 59 60 $IP link add dummy0 type dummy 61 $IP link set dev dummy0 up 62 $IP address add 198.51.100.1/24 dev dummy0 63 $IP -6 address add 2001:db8:1::1/64 dev dummy0 64 set +e 65 66} 67 68cleanup() 69{ 70 $IP link del dev dummy0 &> /dev/null 71 ip netns del ns1 72 ip netns del ns2 &> /dev/null 73} 74 75get_linklocal() 76{ 77 local dev=$1 78 local addr 79 80 addr=$($IP -6 -br addr show dev ${dev} | \ 81 awk '{ 82 for (i = 3; i <= NF; ++i) { 83 if ($i ~ /^fe80/) 84 print $i 85 } 86 }' 87 ) 88 addr=${addr/\/*} 89 90 [ -z "$addr" ] && return 1 91 92 echo $addr 93 94 return 0 95} 96 97fib_unreg_unicast_test() 98{ 99 echo 100 echo "Single path route test" 101 102 setup 103 104 echo " Start point" 105 $IP route get fibmatch 198.51.100.2 &> /dev/null 106 log_test $? 0 "IPv4 fibmatch" 107 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 108 log_test $? 0 "IPv6 fibmatch" 109 110 set -e 111 $IP link del dev dummy0 112 set +e 113 114 echo " Nexthop device deleted" 115 $IP route get fibmatch 198.51.100.2 &> /dev/null 116 log_test $? 2 "IPv4 fibmatch - no route" 117 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 118 log_test $? 2 "IPv6 fibmatch - no route" 119 120 cleanup 121} 122 123fib_unreg_multipath_test() 124{ 125 126 echo 127 echo "Multipath route test" 128 129 setup 130 131 set -e 132 $IP link add dummy1 type dummy 133 $IP link set dev dummy1 up 134 $IP address add 192.0.2.1/24 dev dummy1 135 $IP -6 address add 2001:db8:2::1/64 dev dummy1 136 137 $IP route add 203.0.113.0/24 \ 138 nexthop via 198.51.100.2 dev dummy0 \ 139 nexthop via 192.0.2.2 dev dummy1 140 $IP -6 route add 2001:db8:3::/64 \ 141 nexthop via 2001:db8:1::2 dev dummy0 \ 142 nexthop via 2001:db8:2::2 dev dummy1 143 set +e 144 145 echo " Start point" 146 $IP route get fibmatch 203.0.113.1 &> /dev/null 147 log_test $? 0 "IPv4 fibmatch" 148 $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null 149 log_test $? 0 "IPv6 fibmatch" 150 151 set -e 152 $IP link del dev dummy0 153 set +e 154 155 echo " One nexthop device deleted" 156 $IP route get fibmatch 203.0.113.1 &> /dev/null 157 log_test $? 2 "IPv4 - multipath route removed on delete" 158 159 $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null 160 # In IPv6 we do not flush the entire multipath route. 161 log_test $? 0 "IPv6 - multipath down to single path" 162 163 set -e 164 $IP link del dev dummy1 165 set +e 166 167 echo " Second nexthop device deleted" 168 $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null 169 log_test $? 2 "IPv6 - no route" 170 171 cleanup 172} 173 174fib_unreg_test() 175{ 176 fib_unreg_unicast_test 177 fib_unreg_multipath_test 178} 179 180fib_down_unicast_test() 181{ 182 echo 183 echo "Single path, admin down" 184 185 setup 186 187 echo " Start point" 188 $IP route get fibmatch 198.51.100.2 &> /dev/null 189 log_test $? 0 "IPv4 fibmatch" 190 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 191 log_test $? 0 "IPv6 fibmatch" 192 193 set -e 194 $IP link set dev dummy0 down 195 set +e 196 197 echo " Route deleted on down" 198 $IP route get fibmatch 198.51.100.2 &> /dev/null 199 log_test $? 2 "IPv4 fibmatch" 200 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 201 log_test $? 2 "IPv6 fibmatch" 202 203 cleanup 204} 205 206fib_down_multipath_test_do() 207{ 208 local down_dev=$1 209 local up_dev=$2 210 211 $IP route get fibmatch 203.0.113.1 \ 212 oif $down_dev &> /dev/null 213 log_test $? 2 "IPv4 fibmatch on down device" 214 $IP -6 route get fibmatch 2001:db8:3::1 \ 215 oif $down_dev &> /dev/null 216 log_test $? 2 "IPv6 fibmatch on down device" 217 218 $IP route get fibmatch 203.0.113.1 \ 219 oif $up_dev &> /dev/null 220 log_test $? 0 "IPv4 fibmatch on up device" 221 $IP -6 route get fibmatch 2001:db8:3::1 \ 222 oif $up_dev &> /dev/null 223 log_test $? 0 "IPv6 fibmatch on up device" 224 225 $IP route get fibmatch 203.0.113.1 | \ 226 grep $down_dev | grep -q "dead linkdown" 227 log_test $? 0 "IPv4 flags on down device" 228 $IP -6 route get fibmatch 2001:db8:3::1 | \ 229 grep $down_dev | grep -q "dead linkdown" 230 log_test $? 0 "IPv6 flags on down device" 231 232 $IP route get fibmatch 203.0.113.1 | \ 233 grep $up_dev | grep -q "dead linkdown" 234 log_test $? 1 "IPv4 flags on up device" 235 $IP -6 route get fibmatch 2001:db8:3::1 | \ 236 grep $up_dev | grep -q "dead linkdown" 237 log_test $? 1 "IPv6 flags on up device" 238} 239 240fib_down_multipath_test() 241{ 242 echo 243 echo "Admin down multipath" 244 245 setup 246 247 set -e 248 $IP link add dummy1 type dummy 249 $IP link set dev dummy1 up 250 251 $IP address add 192.0.2.1/24 dev dummy1 252 $IP -6 address add 2001:db8:2::1/64 dev dummy1 253 254 $IP route add 203.0.113.0/24 \ 255 nexthop via 198.51.100.2 dev dummy0 \ 256 nexthop via 192.0.2.2 dev dummy1 257 $IP -6 route add 2001:db8:3::/64 \ 258 nexthop via 2001:db8:1::2 dev dummy0 \ 259 nexthop via 2001:db8:2::2 dev dummy1 260 set +e 261 262 echo " Verify start point" 263 $IP route get fibmatch 203.0.113.1 &> /dev/null 264 log_test $? 0 "IPv4 fibmatch" 265 266 $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null 267 log_test $? 0 "IPv6 fibmatch" 268 269 set -e 270 $IP link set dev dummy0 down 271 set +e 272 273 echo " One device down, one up" 274 fib_down_multipath_test_do "dummy0" "dummy1" 275 276 set -e 277 $IP link set dev dummy0 up 278 $IP link set dev dummy1 down 279 set +e 280 281 echo " Other device down and up" 282 fib_down_multipath_test_do "dummy1" "dummy0" 283 284 set -e 285 $IP link set dev dummy0 down 286 set +e 287 288 echo " Both devices down" 289 $IP route get fibmatch 203.0.113.1 &> /dev/null 290 log_test $? 2 "IPv4 fibmatch" 291 $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null 292 log_test $? 2 "IPv6 fibmatch" 293 294 $IP link del dev dummy1 295 cleanup 296} 297 298fib_down_test() 299{ 300 fib_down_unicast_test 301 fib_down_multipath_test 302} 303 304# Local routes should not be affected when carrier changes. 305fib_carrier_local_test() 306{ 307 echo 308 echo "Local carrier tests - single path" 309 310 setup 311 312 set -e 313 $IP link set dev dummy0 carrier on 314 set +e 315 316 echo " Start point" 317 $IP route get fibmatch 198.51.100.1 &> /dev/null 318 log_test $? 0 "IPv4 fibmatch" 319 $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null 320 log_test $? 0 "IPv6 fibmatch" 321 322 $IP route get fibmatch 198.51.100.1 | \ 323 grep -q "linkdown" 324 log_test $? 1 "IPv4 - no linkdown flag" 325 $IP -6 route get fibmatch 2001:db8:1::1 | \ 326 grep -q "linkdown" 327 log_test $? 1 "IPv6 - no linkdown flag" 328 329 set -e 330 $IP link set dev dummy0 carrier off 331 sleep 1 332 set +e 333 334 echo " Carrier off on nexthop" 335 $IP route get fibmatch 198.51.100.1 &> /dev/null 336 log_test $? 0 "IPv4 fibmatch" 337 $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null 338 log_test $? 0 "IPv6 fibmatch" 339 340 $IP route get fibmatch 198.51.100.1 | \ 341 grep -q "linkdown" 342 log_test $? 1 "IPv4 - linkdown flag set" 343 $IP -6 route get fibmatch 2001:db8:1::1 | \ 344 grep -q "linkdown" 345 log_test $? 1 "IPv6 - linkdown flag set" 346 347 set -e 348 $IP address add 192.0.2.1/24 dev dummy0 349 $IP -6 address add 2001:db8:2::1/64 dev dummy0 350 set +e 351 352 echo " Route to local address with carrier down" 353 $IP route get fibmatch 192.0.2.1 &> /dev/null 354 log_test $? 0 "IPv4 fibmatch" 355 $IP -6 route get fibmatch 2001:db8:2::1 &> /dev/null 356 log_test $? 0 "IPv6 fibmatch" 357 358 $IP route get fibmatch 192.0.2.1 | \ 359 grep -q "linkdown" 360 log_test $? 1 "IPv4 linkdown flag set" 361 $IP -6 route get fibmatch 2001:db8:2::1 | \ 362 grep -q "linkdown" 363 log_test $? 1 "IPv6 linkdown flag set" 364 365 cleanup 366} 367 368fib_carrier_unicast_test() 369{ 370 ret=0 371 372 echo 373 echo "Single path route carrier test" 374 375 setup 376 377 set -e 378 $IP link set dev dummy0 carrier on 379 set +e 380 381 echo " Start point" 382 $IP route get fibmatch 198.51.100.2 &> /dev/null 383 log_test $? 0 "IPv4 fibmatch" 384 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 385 log_test $? 0 "IPv6 fibmatch" 386 387 $IP route get fibmatch 198.51.100.2 | \ 388 grep -q "linkdown" 389 log_test $? 1 "IPv4 no linkdown flag" 390 $IP -6 route get fibmatch 2001:db8:1::2 | \ 391 grep -q "linkdown" 392 log_test $? 1 "IPv6 no linkdown flag" 393 394 set -e 395 $IP link set dev dummy0 carrier off 396 sleep 1 397 set +e 398 399 echo " Carrier down" 400 $IP route get fibmatch 198.51.100.2 &> /dev/null 401 log_test $? 0 "IPv4 fibmatch" 402 $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null 403 log_test $? 0 "IPv6 fibmatch" 404 405 $IP route get fibmatch 198.51.100.2 | \ 406 grep -q "linkdown" 407 log_test $? 0 "IPv4 linkdown flag set" 408 $IP -6 route get fibmatch 2001:db8:1::2 | \ 409 grep -q "linkdown" 410 log_test $? 0 "IPv6 linkdown flag set" 411 412 set -e 413 $IP address add 192.0.2.1/24 dev dummy0 414 $IP -6 address add 2001:db8:2::1/64 dev dummy0 415 set +e 416 417 echo " Second address added with carrier down" 418 $IP route get fibmatch 192.0.2.2 &> /dev/null 419 log_test $? 0 "IPv4 fibmatch" 420 $IP -6 route get fibmatch 2001:db8:2::2 &> /dev/null 421 log_test $? 0 "IPv6 fibmatch" 422 423 $IP route get fibmatch 192.0.2.2 | \ 424 grep -q "linkdown" 425 log_test $? 0 "IPv4 linkdown flag set" 426 $IP -6 route get fibmatch 2001:db8:2::2 | \ 427 grep -q "linkdown" 428 log_test $? 0 "IPv6 linkdown flag set" 429 430 cleanup 431} 432 433fib_carrier_test() 434{ 435 fib_carrier_local_test 436 fib_carrier_unicast_test 437} 438 439fib_rp_filter_test() 440{ 441 echo 442 echo "IPv4 rp_filter tests" 443 444 setup 445 446 set -e 447 $IP link set dev lo address 52:54:00:6a:c7:5e 448 $IP link set dummy0 address 52:54:00:6a:c7:5e 449 $IP link add dummy1 type dummy 450 $IP link set dummy1 address 52:54:00:6a:c7:5e 451 $IP link set dev dummy1 up 452 $NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1 453 $NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1 454 $NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1 455 456 $NS_EXEC tc qd add dev dummy1 parent root handle 1: fq_codel 457 $NS_EXEC tc filter add dev dummy1 parent 1: protocol arp basic action mirred egress redirect dev lo 458 $NS_EXEC tc filter add dev dummy1 parent 1: protocol ip basic action mirred egress redirect dev lo 459 set +e 460 461 run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 198.51.100.1" 462 log_test $? 0 "rp_filter passes local packets" 463 464 run_cmd "ip netns exec ns1 ping -I dummy1 -w1 -c1 127.0.0.1" 465 log_test $? 0 "rp_filter passes loopback packets" 466 467 cleanup 468} 469 470################################################################################ 471# Tests on nexthop spec 472 473# run 'ip route add' with given spec 474add_rt() 475{ 476 local desc="$1" 477 local erc=$2 478 local vrf=$3 479 local pfx=$4 480 local gw=$5 481 local dev=$6 482 local cmd out rc 483 484 [ "$vrf" = "-" ] && vrf="default" 485 [ -n "$gw" ] && gw="via $gw" 486 [ -n "$dev" ] && dev="dev $dev" 487 488 cmd="$IP route add vrf $vrf $pfx $gw $dev" 489 if [ "$VERBOSE" = "1" ]; then 490 printf "\n COMMAND: $cmd\n" 491 fi 492 493 out=$(eval $cmd 2>&1) 494 rc=$? 495 if [ "$VERBOSE" = "1" -a -n "$out" ]; then 496 echo " $out" 497 fi 498 log_test $rc $erc "$desc" 499} 500 501fib4_nexthop() 502{ 503 echo 504 echo "IPv4 nexthop tests" 505 506 echo "<<< write me >>>" 507} 508 509fib6_nexthop() 510{ 511 local lldummy=$(get_linklocal dummy0) 512 local llv1=$(get_linklocal dummy0) 513 514 if [ -z "$lldummy" ]; then 515 echo "Failed to get linklocal address for dummy0" 516 return 1 517 fi 518 if [ -z "$llv1" ]; then 519 echo "Failed to get linklocal address for veth1" 520 return 1 521 fi 522 523 echo 524 echo "IPv6 nexthop tests" 525 526 add_rt "Directly connected nexthop, unicast address" 0 \ 527 - 2001:db8:101::/64 2001:db8:1::2 528 add_rt "Directly connected nexthop, unicast address with device" 0 \ 529 - 2001:db8:102::/64 2001:db8:1::2 "dummy0" 530 add_rt "Gateway is linklocal address" 0 \ 531 - 2001:db8:103::1/64 $llv1 "veth0" 532 533 # fails because LL address requires a device 534 add_rt "Gateway is linklocal address, no device" 2 \ 535 - 2001:db8:104::1/64 $llv1 536 537 # local address can not be a gateway 538 add_rt "Gateway can not be local unicast address" 2 \ 539 - 2001:db8:105::/64 2001:db8:1::1 540 add_rt "Gateway can not be local unicast address, with device" 2 \ 541 - 2001:db8:106::/64 2001:db8:1::1 "dummy0" 542 add_rt "Gateway can not be a local linklocal address" 2 \ 543 - 2001:db8:107::1/64 $lldummy "dummy0" 544 545 # VRF tests 546 add_rt "Gateway can be local address in a VRF" 0 \ 547 - 2001:db8:108::/64 2001:db8:51::2 548 add_rt "Gateway can be local address in a VRF, with device" 0 \ 549 - 2001:db8:109::/64 2001:db8:51::2 "veth0" 550 add_rt "Gateway can be local linklocal address in a VRF" 0 \ 551 - 2001:db8:110::1/64 $llv1 "veth0" 552 553 add_rt "Redirect to VRF lookup" 0 \ 554 - 2001:db8:111::/64 "" "red" 555 556 add_rt "VRF route, gateway can be local address in default VRF" 0 \ 557 red 2001:db8:112::/64 2001:db8:51::1 558 559 # local address in same VRF fails 560 add_rt "VRF route, gateway can not be a local address" 2 \ 561 red 2001:db8:113::1/64 2001:db8:2::1 562 add_rt "VRF route, gateway can not be a local addr with device" 2 \ 563 red 2001:db8:114::1/64 2001:db8:2::1 "dummy1" 564} 565 566# Default VRF: 567# dummy0 - 198.51.100.1/24 2001:db8:1::1/64 568# veth0 - 192.0.2.1/24 2001:db8:51::1/64 569# 570# VRF red: 571# dummy1 - 192.168.2.1/24 2001:db8:2::1/64 572# veth1 - 192.0.2.2/24 2001:db8:51::2/64 573# 574# [ dummy0 veth0 ]--[ veth1 dummy1 ] 575 576fib_nexthop_test() 577{ 578 setup 579 580 set -e 581 582 $IP -4 rule add pref 32765 table local 583 $IP -4 rule del pref 0 584 $IP -6 rule add pref 32765 table local 585 $IP -6 rule del pref 0 586 587 $IP link add red type vrf table 1 588 $IP link set red up 589 $IP -4 route add vrf red unreachable default metric 4278198272 590 $IP -6 route add vrf red unreachable default metric 4278198272 591 592 $IP link add veth0 type veth peer name veth1 593 $IP link set dev veth0 up 594 $IP address add 192.0.2.1/24 dev veth0 595 $IP -6 address add 2001:db8:51::1/64 dev veth0 596 597 $IP link set dev veth1 vrf red up 598 $IP address add 192.0.2.2/24 dev veth1 599 $IP -6 address add 2001:db8:51::2/64 dev veth1 600 601 $IP link add dummy1 type dummy 602 $IP link set dev dummy1 vrf red up 603 $IP address add 192.168.2.1/24 dev dummy1 604 $IP -6 address add 2001:db8:2::1/64 dev dummy1 605 set +e 606 607 sleep 1 608 fib4_nexthop 609 fib6_nexthop 610 611 ( 612 $IP link del dev dummy1 613 $IP link del veth0 614 $IP link del red 615 ) 2>/dev/null 616 cleanup 617} 618 619fib_suppress_test() 620{ 621 $IP link add dummy1 type dummy 622 $IP link set dummy1 up 623 $IP -6 route add default dev dummy1 624 $IP -6 rule add table main suppress_prefixlength 0 625 ping -f -c 1000 -W 1 1234::1 || true 626 $IP -6 rule del table main suppress_prefixlength 0 627 $IP link del dummy1 628 629 # If we got here without crashing, we're good. 630 return 0 631} 632 633################################################################################ 634# Tests on route add and replace 635 636run_cmd() 637{ 638 local cmd="$1" 639 local out 640 local stderr="2>/dev/null" 641 642 if [ "$VERBOSE" = "1" ]; then 643 printf " COMMAND: $cmd\n" 644 stderr= 645 fi 646 647 out=$(eval $cmd $stderr) 648 rc=$? 649 if [ "$VERBOSE" = "1" -a -n "$out" ]; then 650 echo " $out" 651 fi 652 653 [ "$VERBOSE" = "1" ] && echo 654 655 return $rc 656} 657 658check_expected() 659{ 660 local out="$1" 661 local expected="$2" 662 local rc=0 663 664 [ "${out}" = "${expected}" ] && return 0 665 666 if [ -z "${out}" ]; then 667 if [ "$VERBOSE" = "1" ]; then 668 printf "\nNo route entry found\n" 669 printf "Expected:\n" 670 printf " ${expected}\n" 671 fi 672 return 1 673 fi 674 675 # tricky way to convert output to 1-line without ip's 676 # messy '\'; this drops all extra white space 677 out=$(echo ${out}) 678 if [ "${out}" != "${expected}" ]; then 679 rc=1 680 if [ "${VERBOSE}" = "1" ]; then 681 printf " Unexpected route entry. Have:\n" 682 printf " ${out}\n" 683 printf " Expected:\n" 684 printf " ${expected}\n\n" 685 fi 686 fi 687 688 return $rc 689} 690 691# add route for a prefix, flushing any existing routes first 692# expected to be the first step of a test 693add_route6() 694{ 695 local pfx="$1" 696 local nh="$2" 697 local out 698 699 if [ "$VERBOSE" = "1" ]; then 700 echo 701 echo " ##################################################" 702 echo 703 fi 704 705 run_cmd "$IP -6 ro flush ${pfx}" 706 [ $? -ne 0 ] && exit 1 707 708 out=$($IP -6 ro ls match ${pfx}) 709 if [ -n "$out" ]; then 710 echo "Failed to flush routes for prefix used for tests." 711 exit 1 712 fi 713 714 run_cmd "$IP -6 ro add ${pfx} ${nh}" 715 if [ $? -ne 0 ]; then 716 echo "Failed to add initial route for test." 717 exit 1 718 fi 719} 720 721# add initial route - used in replace route tests 722add_initial_route6() 723{ 724 add_route6 "2001:db8:104::/64" "$1" 725} 726 727check_route6() 728{ 729 local pfx 730 local expected="$1" 731 local out 732 local rc=0 733 734 set -- $expected 735 pfx=$1 736 737 out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//') 738 check_expected "${out}" "${expected}" 739} 740 741route_cleanup() 742{ 743 $IP li del red 2>/dev/null 744 $IP li del dummy1 2>/dev/null 745 $IP li del veth1 2>/dev/null 746 $IP li del veth3 2>/dev/null 747 748 cleanup &> /dev/null 749} 750 751route_setup() 752{ 753 route_cleanup 754 setup 755 756 [ "${VERBOSE}" = "1" ] && set -x 757 set -e 758 759 ip netns add ns2 760 ip netns set ns2 auto 761 ip -netns ns2 link set dev lo up 762 ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1 763 ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1 764 765 $IP li add veth1 type veth peer name veth2 766 $IP li add veth3 type veth peer name veth4 767 768 $IP li set veth1 up 769 $IP li set veth3 up 770 $IP li set veth2 netns ns2 up 771 $IP li set veth4 netns ns2 up 772 ip -netns ns2 li add dummy1 type dummy 773 ip -netns ns2 li set dummy1 up 774 775 $IP -6 addr add 2001:db8:101::1/64 dev veth1 nodad 776 $IP -6 addr add 2001:db8:103::1/64 dev veth3 nodad 777 $IP addr add 172.16.101.1/24 dev veth1 778 $IP addr add 172.16.103.1/24 dev veth3 779 780 ip -netns ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad 781 ip -netns ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad 782 ip -netns ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad 783 784 ip -netns ns2 addr add 172.16.101.2/24 dev veth2 785 ip -netns ns2 addr add 172.16.103.2/24 dev veth4 786 ip -netns ns2 addr add 172.16.104.1/24 dev dummy1 787 788 set +e 789} 790 791# assumption is that basic add of a single path route works 792# otherwise just adding an address on an interface is broken 793ipv6_rt_add() 794{ 795 local rc 796 797 echo 798 echo "IPv6 route add / append tests" 799 800 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 801 add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" 802 run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2" 803 log_test $? 2 "Attempt to add duplicate route - gw" 804 805 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 806 add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" 807 run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3" 808 log_test $? 2 "Attempt to add duplicate route - dev only" 809 810 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 811 add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" 812 run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" 813 log_test $? 2 "Attempt to add duplicate route - reject route" 814 815 # route append with same prefix adds a new route 816 # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND 817 add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" 818 run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" 819 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 820 log_test $? 0 "Append nexthop to existing route - gw" 821 822 # insert mpath directly 823 add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 824 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 825 log_test $? 0 "Add multipath route" 826 827 add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 828 run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 829 log_test $? 2 "Attempt to add duplicate multipath route" 830 831 # insert of a second route without append but different metric 832 add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" 833 run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512" 834 rc=$? 835 if [ $rc -eq 0 ]; then 836 run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256" 837 rc=$? 838 fi 839 log_test $rc 0 "Route add with different metrics" 840 841 run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512" 842 rc=$? 843 if [ $rc -eq 0 ]; then 844 check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" 845 rc=$? 846 fi 847 log_test $rc 0 "Route delete with metric" 848} 849 850ipv6_rt_replace_single() 851{ 852 # single path with single path 853 # 854 add_initial_route6 "via 2001:db8:101::2" 855 run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2" 856 check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" 857 log_test $? 0 "Single path with single path" 858 859 # single path with multipath 860 # 861 add_initial_route6 "nexthop via 2001:db8:101::2" 862 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2" 863 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 864 log_test $? 0 "Single path with multipath" 865 866 # single path with single path using MULTIPATH attribute 867 # 868 add_initial_route6 "via 2001:db8:101::2" 869 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2" 870 check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" 871 log_test $? 0 "Single path with single path via multipath attribute" 872 873 # route replace fails - invalid nexthop 874 add_initial_route6 "via 2001:db8:101::2" 875 run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2" 876 if [ $? -eq 0 ]; then 877 # previous command is expected to fail so if it returns 0 878 # that means the test failed. 879 log_test 0 1 "Invalid nexthop" 880 else 881 check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024" 882 log_test $? 0 "Invalid nexthop" 883 fi 884 885 # replace non-existent route 886 # - note use of change versus replace since ip adds NLM_F_CREATE 887 # for replace 888 add_initial_route6 "via 2001:db8:101::2" 889 run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2" 890 log_test $? 2 "Single path - replace of non-existent route" 891} 892 893ipv6_rt_replace_mpath() 894{ 895 # multipath with multipath 896 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 897 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" 898 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1" 899 log_test $? 0 "Multipath with multipath" 900 901 # multipath with single 902 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 903 run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3" 904 check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" 905 log_test $? 0 "Multipath with single path" 906 907 # multipath with single 908 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 909 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3" 910 check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" 911 log_test $? 0 "Multipath with single path via multipath attribute" 912 913 # route replace fails - invalid nexthop 1 914 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 915 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3" 916 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 917 log_test $? 0 "Multipath - invalid first nexthop" 918 919 # route replace fails - invalid nexthop 2 920 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 921 run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3" 922 check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 923 log_test $? 0 "Multipath - invalid second nexthop" 924 925 # multipath non-existent route 926 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 927 run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3" 928 log_test $? 2 "Multipath - replace of non-existent route" 929} 930 931ipv6_rt_replace() 932{ 933 echo 934 echo "IPv6 route replace tests" 935 936 ipv6_rt_replace_single 937 ipv6_rt_replace_mpath 938} 939 940ipv6_route_test() 941{ 942 route_setup 943 944 ipv6_rt_add 945 ipv6_rt_replace 946 947 route_cleanup 948} 949 950ip_addr_metric_check() 951{ 952 ip addr help 2>&1 | grep -q metric 953 if [ $? -ne 0 ]; then 954 echo "iproute2 command does not support metric for addresses. Skipping test" 955 return 1 956 fi 957 958 return 0 959} 960 961ipv6_addr_metric_test() 962{ 963 local rc 964 965 echo 966 echo "IPv6 prefix route tests" 967 968 ip_addr_metric_check || return 1 969 970 setup 971 972 set -e 973 $IP li add dummy1 type dummy 974 $IP li add dummy2 type dummy 975 $IP li set dummy1 up 976 $IP li set dummy2 up 977 978 # default entry is metric 256 979 run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64" 980 run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64" 981 set +e 982 983 check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256" 984 log_test $? 0 "Default metric" 985 986 set -e 987 run_cmd "$IP -6 addr flush dev dummy1" 988 run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257" 989 set +e 990 991 check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257" 992 log_test $? 0 "User specified metric on first device" 993 994 set -e 995 run_cmd "$IP -6 addr flush dev dummy2" 996 run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258" 997 set +e 998 999 check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258" 1000 log_test $? 0 "User specified metric on second device" 1001 1002 run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257" 1003 rc=$? 1004 if [ $rc -eq 0 ]; then 1005 check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258" 1006 rc=$? 1007 fi 1008 log_test $rc 0 "Delete of address on first device" 1009 1010 run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259" 1011 rc=$? 1012 if [ $rc -eq 0 ]; then 1013 check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259" 1014 rc=$? 1015 fi 1016 log_test $rc 0 "Modify metric of address" 1017 1018 # verify prefix route removed on down 1019 run_cmd "ip netns exec ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1" 1020 run_cmd "$IP li set dev dummy2 down" 1021 rc=$? 1022 if [ $rc -eq 0 ]; then 1023 out=$($IP -6 ro ls match 2001:db8:104::/64) 1024 check_expected "${out}" "" 1025 rc=$? 1026 fi 1027 log_test $rc 0 "Prefix route removed on link down" 1028 1029 # verify prefix route re-inserted with assigned metric 1030 run_cmd "$IP li set dev dummy2 up" 1031 rc=$? 1032 if [ $rc -eq 0 ]; then 1033 check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259" 1034 rc=$? 1035 fi 1036 log_test $rc 0 "Prefix route with metric on link up" 1037 1038 $IP li del dummy1 1039 $IP li del dummy2 1040 cleanup 1041} 1042 1043ipv6_route_metrics_test() 1044{ 1045 local rc 1046 1047 echo 1048 echo "IPv6 routes with metrics" 1049 1050 route_setup 1051 1052 # 1053 # single path with metrics 1054 # 1055 run_cmd "$IP -6 ro add 2001:db8:111::/64 via 2001:db8:101::2 mtu 1400" 1056 rc=$? 1057 if [ $rc -eq 0 ]; then 1058 check_route6 "2001:db8:111::/64 via 2001:db8:101::2 dev veth1 metric 1024 mtu 1400" 1059 rc=$? 1060 fi 1061 log_test $rc 0 "Single path route with mtu metric" 1062 1063 1064 # 1065 # multipath via separate routes with metrics 1066 # 1067 run_cmd "$IP -6 ro add 2001:db8:112::/64 via 2001:db8:101::2 mtu 1400" 1068 run_cmd "$IP -6 ro append 2001:db8:112::/64 via 2001:db8:103::2" 1069 rc=$? 1070 if [ $rc -eq 0 ]; then 1071 check_route6 "2001:db8:112::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 1072 rc=$? 1073 fi 1074 log_test $rc 0 "Multipath route via 2 single routes with mtu metric on first" 1075 1076 # second route is coalesced to first to make a multipath route. 1077 # MTU of the second path is hidden from display! 1078 run_cmd "$IP -6 ro add 2001:db8:113::/64 via 2001:db8:101::2" 1079 run_cmd "$IP -6 ro append 2001:db8:113::/64 via 2001:db8:103::2 mtu 1400" 1080 rc=$? 1081 if [ $rc -eq 0 ]; then 1082 check_route6 "2001:db8:113::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 1083 rc=$? 1084 fi 1085 log_test $rc 0 "Multipath route via 2 single routes with mtu metric on 2nd" 1086 1087 run_cmd "$IP -6 ro del 2001:db8:113::/64 via 2001:db8:101::2" 1088 if [ $? -eq 0 ]; then 1089 check_route6 "2001:db8:113::/64 via 2001:db8:103::2 dev veth3 metric 1024 mtu 1400" 1090 log_test $? 0 " MTU of second leg" 1091 fi 1092 1093 # 1094 # multipath with metrics 1095 # 1096 run_cmd "$IP -6 ro add 2001:db8:115::/64 mtu 1400 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" 1097 rc=$? 1098 if [ $rc -eq 0 ]; then 1099 check_route6 "2001:db8:115::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" 1100 rc=$? 1101 fi 1102 log_test $rc 0 "Multipath route with mtu metric" 1103 1104 $IP -6 ro add 2001:db8:104::/64 via 2001:db8:101::2 mtu 1300 1105 run_cmd "ip netns exec ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1" 1106 log_test $? 0 "Using route with mtu metric" 1107 1108 run_cmd "$IP -6 ro add 2001:db8:114::/64 via 2001:db8:101::2 congctl lock foo" 1109 log_test $? 2 "Invalid metric (fails metric_convert)" 1110 1111 route_cleanup 1112} 1113 1114# add route for a prefix, flushing any existing routes first 1115# expected to be the first step of a test 1116add_route() 1117{ 1118 local pfx="$1" 1119 local nh="$2" 1120 local out 1121 1122 if [ "$VERBOSE" = "1" ]; then 1123 echo 1124 echo " ##################################################" 1125 echo 1126 fi 1127 1128 run_cmd "$IP ro flush ${pfx}" 1129 [ $? -ne 0 ] && exit 1 1130 1131 out=$($IP ro ls match ${pfx}) 1132 if [ -n "$out" ]; then 1133 echo "Failed to flush routes for prefix used for tests." 1134 exit 1 1135 fi 1136 1137 run_cmd "$IP ro add ${pfx} ${nh}" 1138 if [ $? -ne 0 ]; then 1139 echo "Failed to add initial route for test." 1140 exit 1 1141 fi 1142} 1143 1144# add initial route - used in replace route tests 1145add_initial_route() 1146{ 1147 add_route "172.16.104.0/24" "$1" 1148} 1149 1150check_route() 1151{ 1152 local pfx 1153 local expected="$1" 1154 local out 1155 1156 set -- $expected 1157 pfx=$1 1158 [ "${pfx}" = "unreachable" ] && pfx=$2 1159 1160 out=$($IP ro ls match ${pfx}) 1161 check_expected "${out}" "${expected}" 1162} 1163 1164# assumption is that basic add of a single path route works 1165# otherwise just adding an address on an interface is broken 1166ipv4_rt_add() 1167{ 1168 local rc 1169 1170 echo 1171 echo "IPv4 route add / append tests" 1172 1173 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 1174 add_route "172.16.104.0/24" "via 172.16.101.2" 1175 run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2" 1176 log_test $? 2 "Attempt to add duplicate route - gw" 1177 1178 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 1179 add_route "172.16.104.0/24" "via 172.16.101.2" 1180 run_cmd "$IP ro add 172.16.104.0/24 dev veth3" 1181 log_test $? 2 "Attempt to add duplicate route - dev only" 1182 1183 # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL 1184 add_route "172.16.104.0/24" "via 172.16.101.2" 1185 run_cmd "$IP ro add unreachable 172.16.104.0/24" 1186 log_test $? 2 "Attempt to add duplicate route - reject route" 1187 1188 # iproute2 prepend only sets NLM_F_CREATE 1189 # - adds a new route; does NOT convert existing route to ECMP 1190 add_route "172.16.104.0/24" "via 172.16.101.2" 1191 run_cmd "$IP ro prepend 172.16.104.0/24 via 172.16.103.2" 1192 check_route "172.16.104.0/24 via 172.16.103.2 dev veth3 172.16.104.0/24 via 172.16.101.2 dev veth1" 1193 log_test $? 0 "Add new nexthop for existing prefix" 1194 1195 # route append with same prefix adds a new route 1196 # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND 1197 add_route "172.16.104.0/24" "via 172.16.101.2" 1198 run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2" 1199 check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.2 dev veth3" 1200 log_test $? 0 "Append nexthop to existing route - gw" 1201 1202 add_route "172.16.104.0/24" "via 172.16.101.2" 1203 run_cmd "$IP ro append 172.16.104.0/24 dev veth3" 1204 check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 dev veth3 scope link" 1205 log_test $? 0 "Append nexthop to existing route - dev only" 1206 1207 add_route "172.16.104.0/24" "via 172.16.101.2" 1208 run_cmd "$IP ro append unreachable 172.16.104.0/24" 1209 check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 unreachable 172.16.104.0/24" 1210 log_test $? 0 "Append nexthop to existing route - reject route" 1211 1212 run_cmd "$IP ro flush 172.16.104.0/24" 1213 run_cmd "$IP ro add unreachable 172.16.104.0/24" 1214 run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2" 1215 check_route "unreachable 172.16.104.0/24 172.16.104.0/24 via 172.16.103.2 dev veth3" 1216 log_test $? 0 "Append nexthop to existing reject route - gw" 1217 1218 run_cmd "$IP ro flush 172.16.104.0/24" 1219 run_cmd "$IP ro add unreachable 172.16.104.0/24" 1220 run_cmd "$IP ro append 172.16.104.0/24 dev veth3" 1221 check_route "unreachable 172.16.104.0/24 172.16.104.0/24 dev veth3 scope link" 1222 log_test $? 0 "Append nexthop to existing reject route - dev only" 1223 1224 # insert mpath directly 1225 add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1226 check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1227 log_test $? 0 "add multipath route" 1228 1229 add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1230 run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1231 log_test $? 2 "Attempt to add duplicate multipath route" 1232 1233 # insert of a second route without append but different metric 1234 add_route "172.16.104.0/24" "via 172.16.101.2" 1235 run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2 metric 512" 1236 rc=$? 1237 if [ $rc -eq 0 ]; then 1238 run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.3 metric 256" 1239 rc=$? 1240 fi 1241 log_test $rc 0 "Route add with different metrics" 1242 1243 run_cmd "$IP ro del 172.16.104.0/24 metric 512" 1244 rc=$? 1245 if [ $rc -eq 0 ]; then 1246 check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.3 dev veth3 metric 256" 1247 rc=$? 1248 fi 1249 log_test $rc 0 "Route delete with metric" 1250} 1251 1252ipv4_rt_replace_single() 1253{ 1254 # single path with single path 1255 # 1256 add_initial_route "via 172.16.101.2" 1257 run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.103.2" 1258 check_route "172.16.104.0/24 via 172.16.103.2 dev veth3" 1259 log_test $? 0 "Single path with single path" 1260 1261 # single path with multipath 1262 # 1263 add_initial_route "nexthop via 172.16.101.2" 1264 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.2" 1265 check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1266 log_test $? 0 "Single path with multipath" 1267 1268 # single path with reject 1269 # 1270 add_initial_route "nexthop via 172.16.101.2" 1271 run_cmd "$IP ro replace unreachable 172.16.104.0/24" 1272 check_route "unreachable 172.16.104.0/24" 1273 log_test $? 0 "Single path with reject route" 1274 1275 # single path with single path using MULTIPATH attribute 1276 # 1277 add_initial_route "via 172.16.101.2" 1278 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.103.2" 1279 check_route "172.16.104.0/24 via 172.16.103.2 dev veth3" 1280 log_test $? 0 "Single path with single path via multipath attribute" 1281 1282 # route replace fails - invalid nexthop 1283 add_initial_route "via 172.16.101.2" 1284 run_cmd "$IP ro replace 172.16.104.0/24 via 2001:db8:104::2" 1285 if [ $? -eq 0 ]; then 1286 # previous command is expected to fail so if it returns 0 1287 # that means the test failed. 1288 log_test 0 1 "Invalid nexthop" 1289 else 1290 check_route "172.16.104.0/24 via 172.16.101.2 dev veth1" 1291 log_test $? 0 "Invalid nexthop" 1292 fi 1293 1294 # replace non-existent route 1295 # - note use of change versus replace since ip adds NLM_F_CREATE 1296 # for replace 1297 add_initial_route "via 172.16.101.2" 1298 run_cmd "$IP ro change 172.16.105.0/24 via 172.16.101.2" 1299 log_test $? 2 "Single path - replace of non-existent route" 1300} 1301 1302ipv4_rt_replace_mpath() 1303{ 1304 # multipath with multipath 1305 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1306 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3" 1307 check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.3 dev veth3 weight 1" 1308 log_test $? 0 "Multipath with multipath" 1309 1310 # multipath with single 1311 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1312 run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.101.3" 1313 check_route "172.16.104.0/24 via 172.16.101.3 dev veth1" 1314 log_test $? 0 "Multipath with single path" 1315 1316 # multipath with single 1317 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1318 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3" 1319 check_route "172.16.104.0/24 via 172.16.101.3 dev veth1" 1320 log_test $? 0 "Multipath with single path via multipath attribute" 1321 1322 # multipath with reject 1323 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1324 run_cmd "$IP ro replace unreachable 172.16.104.0/24" 1325 check_route "unreachable 172.16.104.0/24" 1326 log_test $? 0 "Multipath with reject route" 1327 1328 # route replace fails - invalid nexthop 1 1329 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1330 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.111.3 nexthop via 172.16.103.3" 1331 check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1332 log_test $? 0 "Multipath - invalid first nexthop" 1333 1334 # route replace fails - invalid nexthop 2 1335 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1336 run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.113.3" 1337 check_route "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1338 log_test $? 0 "Multipath - invalid second nexthop" 1339 1340 # multipath non-existent route 1341 add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1342 run_cmd "$IP ro change 172.16.105.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3" 1343 log_test $? 2 "Multipath - replace of non-existent route" 1344} 1345 1346ipv4_rt_replace() 1347{ 1348 echo 1349 echo "IPv4 route replace tests" 1350 1351 ipv4_rt_replace_single 1352 ipv4_rt_replace_mpath 1353} 1354 1355ipv4_route_test() 1356{ 1357 route_setup 1358 1359 ipv4_rt_add 1360 ipv4_rt_replace 1361 1362 route_cleanup 1363} 1364 1365ipv4_addr_metric_test() 1366{ 1367 local rc 1368 1369 echo 1370 echo "IPv4 prefix route tests" 1371 1372 ip_addr_metric_check || return 1 1373 1374 setup 1375 1376 set -e 1377 $IP li add dummy1 type dummy 1378 $IP li add dummy2 type dummy 1379 $IP li set dummy1 up 1380 $IP li set dummy2 up 1381 1382 # default entry is metric 256 1383 run_cmd "$IP addr add dev dummy1 172.16.104.1/24" 1384 run_cmd "$IP addr add dev dummy2 172.16.104.2/24" 1385 set +e 1386 1387 check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2" 1388 log_test $? 0 "Default metric" 1389 1390 set -e 1391 run_cmd "$IP addr flush dev dummy1" 1392 run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257" 1393 set +e 1394 1395 check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257" 1396 log_test $? 0 "User specified metric on first device" 1397 1398 set -e 1399 run_cmd "$IP addr flush dev dummy2" 1400 run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258" 1401 set +e 1402 1403 check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258" 1404 log_test $? 0 "User specified metric on second device" 1405 1406 run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257" 1407 rc=$? 1408 if [ $rc -eq 0 ]; then 1409 check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258" 1410 rc=$? 1411 fi 1412 log_test $rc 0 "Delete of address on first device" 1413 1414 run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259" 1415 rc=$? 1416 if [ $rc -eq 0 ]; then 1417 check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259" 1418 rc=$? 1419 fi 1420 log_test $rc 0 "Modify metric of address" 1421 1422 # verify prefix route removed on down 1423 run_cmd "$IP li set dev dummy2 down" 1424 rc=$? 1425 if [ $rc -eq 0 ]; then 1426 out=$($IP ro ls match 172.16.104.0/24) 1427 check_expected "${out}" "" 1428 rc=$? 1429 fi 1430 log_test $rc 0 "Prefix route removed on link down" 1431 1432 # verify prefix route re-inserted with assigned metric 1433 run_cmd "$IP li set dev dummy2 up" 1434 rc=$? 1435 if [ $rc -eq 0 ]; then 1436 check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259" 1437 rc=$? 1438 fi 1439 log_test $rc 0 "Prefix route with metric on link up" 1440 1441 # explicitly check for metric changes on edge scenarios 1442 run_cmd "$IP addr flush dev dummy2" 1443 run_cmd "$IP addr add dev dummy2 172.16.104.0/24 metric 259" 1444 run_cmd "$IP addr change dev dummy2 172.16.104.0/24 metric 260" 1445 rc=$? 1446 if [ $rc -eq 0 ]; then 1447 check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.0 metric 260" 1448 rc=$? 1449 fi 1450 log_test $rc 0 "Modify metric of .0/24 address" 1451 1452 run_cmd "$IP addr flush dev dummy2" 1453 run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260" 1454 run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 261" 1455 rc=$? 1456 if [ $rc -eq 0 ]; then 1457 check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" 1458 rc=$? 1459 fi 1460 log_test $rc 0 "Modify metric of address with peer route" 1461 1462 $IP li del dummy1 1463 $IP li del dummy2 1464 cleanup 1465} 1466 1467ipv4_route_metrics_test() 1468{ 1469 local rc 1470 1471 echo 1472 echo "IPv4 route add / append tests" 1473 1474 route_setup 1475 1476 run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 mtu 1400" 1477 rc=$? 1478 if [ $rc -eq 0 ]; then 1479 check_route "172.16.111.0/24 via 172.16.101.2 dev veth1 mtu 1400" 1480 rc=$? 1481 fi 1482 log_test $rc 0 "Single path route with mtu metric" 1483 1484 1485 run_cmd "$IP ro add 172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 nexthop via 172.16.103.2" 1486 rc=$? 1487 if [ $rc -eq 0 ]; then 1488 check_route "172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1489 rc=$? 1490 fi 1491 log_test $rc 0 "Multipath route with mtu metric" 1492 1493 $IP ro add 172.16.104.0/24 via 172.16.101.2 mtu 1300 1494 run_cmd "ip netns exec ns1 ping -w1 -c1 -s 1500 172.16.104.1" 1495 log_test $? 0 "Using route with mtu metric" 1496 1497 run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 congctl lock foo" 1498 log_test $? 2 "Invalid metric (fails metric_convert)" 1499 1500 route_cleanup 1501} 1502 1503ipv4_del_addr_test() 1504{ 1505 echo 1506 echo "IPv4 delete address route tests" 1507 1508 setup 1509 1510 set -e 1511 $IP li add dummy1 type dummy 1512 $IP li set dummy1 up 1513 $IP li add dummy2 type dummy 1514 $IP li set dummy2 up 1515 $IP li add red type vrf table 1111 1516 $IP li set red up 1517 $IP ro add vrf red unreachable default 1518 $IP li set dummy2 vrf red 1519 1520 $IP addr add dev dummy1 172.16.104.1/24 1521 $IP addr add dev dummy1 172.16.104.11/24 1522 $IP addr add dev dummy2 172.16.104.1/24 1523 $IP addr add dev dummy2 172.16.104.11/24 1524 $IP route add 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11 1525 $IP route add vrf red 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11 1526 set +e 1527 1528 # removing address from device in vrf should only remove route from vrf table 1529 $IP addr del dev dummy2 172.16.104.11/24 1530 $IP ro ls vrf red | grep -q 172.16.105.0/24 1531 log_test $? 1 "Route removed from VRF when source address deleted" 1532 1533 $IP ro ls | grep -q 172.16.105.0/24 1534 log_test $? 0 "Route in default VRF not removed" 1535 1536 $IP addr add dev dummy2 172.16.104.11/24 1537 $IP route add vrf red 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11 1538 1539 $IP addr del dev dummy1 172.16.104.11/24 1540 $IP ro ls | grep -q 172.16.105.0/24 1541 log_test $? 1 "Route removed in default VRF when source address deleted" 1542 1543 $IP ro ls vrf red | grep -q 172.16.105.0/24 1544 log_test $? 0 "Route in VRF is not removed by address delete" 1545 1546 $IP li del dummy1 1547 $IP li del dummy2 1548 cleanup 1549} 1550 1551 1552ipv4_route_v6_gw_test() 1553{ 1554 local rc 1555 1556 echo 1557 echo "IPv4 route with IPv6 gateway tests" 1558 1559 route_setup 1560 sleep 2 1561 1562 # 1563 # single path route 1564 # 1565 run_cmd "$IP ro add 172.16.104.0/24 via inet6 2001:db8:101::2" 1566 rc=$? 1567 log_test $rc 0 "Single path route with IPv6 gateway" 1568 if [ $rc -eq 0 ]; then 1569 check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1" 1570 fi 1571 1572 run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1" 1573 log_test $rc 0 "Single path route with IPv6 gateway - ping" 1574 1575 run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2" 1576 rc=$? 1577 log_test $rc 0 "Single path route delete" 1578 if [ $rc -eq 0 ]; then 1579 check_route "172.16.112.0/24" 1580 fi 1581 1582 # 1583 # multipath - v6 then v4 1584 # 1585 run_cmd "$IP ro add 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" 1586 rc=$? 1587 log_test $rc 0 "Multipath route add - v6 nexthop then v4" 1588 if [ $rc -eq 0 ]; then 1589 check_route "172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1" 1590 fi 1591 1592 run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" 1593 log_test $? 2 " Multipath route delete - nexthops in wrong order" 1594 1595 run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" 1596 log_test $? 0 " Multipath route delete exact match" 1597 1598 # 1599 # multipath - v4 then v6 1600 # 1601 run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" 1602 rc=$? 1603 log_test $rc 0 "Multipath route add - v4 nexthop then v6" 1604 if [ $rc -eq 0 ]; then 1605 check_route "172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 weight 1 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1" 1606 fi 1607 1608 run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3" 1609 log_test $? 2 " Multipath route delete - nexthops in wrong order" 1610 1611 run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1" 1612 log_test $? 0 " Multipath route delete exact match" 1613 1614 route_cleanup 1615} 1616 1617################################################################################ 1618# usage 1619 1620usage() 1621{ 1622 cat <<EOF 1623usage: ${0##*/} OPTS 1624 1625 -t <test> Test(s) to run (default: all) 1626 (options: $TESTS) 1627 -p Pause on fail 1628 -P Pause after each test before cleanup 1629 -v verbose mode (show commands and output) 1630EOF 1631} 1632 1633################################################################################ 1634# main 1635 1636while getopts :t:pPhv o 1637do 1638 case $o in 1639 t) TESTS=$OPTARG;; 1640 p) PAUSE_ON_FAIL=yes;; 1641 P) PAUSE=yes;; 1642 v) VERBOSE=$(($VERBOSE + 1));; 1643 h) usage; exit 0;; 1644 *) usage; exit 1;; 1645 esac 1646done 1647 1648PEER_CMD="ip netns exec ${PEER_NS}" 1649 1650# make sure we don't pause twice 1651[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no 1652 1653if [ "$(id -u)" -ne 0 ];then 1654 echo "SKIP: Need root privileges" 1655 exit $ksft_skip; 1656fi 1657 1658if [ ! -x "$(command -v ip)" ]; then 1659 echo "SKIP: Could not run test without ip tool" 1660 exit $ksft_skip 1661fi 1662 1663ip route help 2>&1 | grep -q fibmatch 1664if [ $? -ne 0 ]; then 1665 echo "SKIP: iproute2 too old, missing fibmatch" 1666 exit $ksft_skip 1667fi 1668 1669# start clean 1670cleanup &> /dev/null 1671 1672for t in $TESTS 1673do 1674 case $t in 1675 fib_unreg_test|unregister) fib_unreg_test;; 1676 fib_down_test|down) fib_down_test;; 1677 fib_carrier_test|carrier) fib_carrier_test;; 1678 fib_rp_filter_test|rp_filter) fib_rp_filter_test;; 1679 fib_nexthop_test|nexthop) fib_nexthop_test;; 1680 fib_suppress_test|suppress) fib_suppress_test;; 1681 ipv6_route_test|ipv6_rt) ipv6_route_test;; 1682 ipv4_route_test|ipv4_rt) ipv4_route_test;; 1683 ipv6_addr_metric) ipv6_addr_metric_test;; 1684 ipv4_addr_metric) ipv4_addr_metric_test;; 1685 ipv4_del_addr) ipv4_del_addr_test;; 1686 ipv6_route_metrics) ipv6_route_metrics_test;; 1687 ipv4_route_metrics) ipv4_route_metrics_test;; 1688 ipv4_route_v6_gw) ipv4_route_v6_gw_test;; 1689 1690 help) echo "Test names: $TESTS"; exit 0;; 1691 esac 1692done 1693 1694if [ "$TESTS" != "none" ]; then 1695 printf "\nTests passed: %3d\n" ${nsuccess} 1696 printf "Tests failed: %3d\n" ${nfail} 1697fi 1698 1699exit $ret 1700