1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3 4lib_dir=$(dirname $0)/../../../net/forwarding 5 6ALL_TESTS="fw_flash_test params_test regions_test reload_test \ 7 netns_reload_test resource_test dev_info_test \ 8 empty_reporter_test dummy_reporter_test rate_test" 9NUM_NETIFS=0 10source $lib_dir/lib.sh 11 12BUS_ADDR=10 13PORT_COUNT=4 14VF_COUNT=4 15DEV_NAME=netdevsim$BUS_ADDR 16SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ 17DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ 18DL_HANDLE=netdevsim/$DEV_NAME 19 20fw_flash_test() 21{ 22 RET=0 23 24 devlink dev flash $DL_HANDLE file dummy 25 check_err $? "Failed to flash with status updates on" 26 27 devlink dev flash $DL_HANDLE file dummy component fw.mgmt 28 check_err $? "Failed to flash with component attribute" 29 30 devlink dev flash $DL_HANDLE file dummy overwrite settings 31 check_fail $? "Flash with overwrite settings should be rejected" 32 33 echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask 34 check_err $? "Failed to change allowed overwrite mask" 35 36 devlink dev flash $DL_HANDLE file dummy overwrite settings 37 check_err $? "Failed to flash with settings overwrite enabled" 38 39 devlink dev flash $DL_HANDLE file dummy overwrite identifiers 40 check_fail $? "Flash with overwrite settings should be identifiers" 41 42 echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask 43 check_err $? "Failed to change allowed overwrite mask" 44 45 devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings 46 check_err $? "Failed to flash with settings and identifiers overwrite enabled" 47 48 echo "n"> $DEBUGFS_DIR/fw_update_status 49 check_err $? "Failed to disable status updates" 50 51 devlink dev flash $DL_HANDLE file dummy 52 check_err $? "Failed to flash with status updates off" 53 54 log_test "fw flash test" 55} 56 57param_get() 58{ 59 local name=$1 60 61 cmd_jq "devlink dev param show $DL_HANDLE name $name -j" \ 62 '.[][][].values[] | select(.cmode == "driverinit").value' 63} 64 65param_set() 66{ 67 local name=$1 68 local value=$2 69 70 devlink dev param set $DL_HANDLE name $name cmode driverinit value $value 71} 72 73check_value() 74{ 75 local name=$1 76 local phase_name=$2 77 local expected_param_value=$3 78 local expected_debugfs_value=$4 79 local value 80 81 value=$(param_get $name) 82 check_err $? "Failed to get $name param value" 83 [ "$value" == "$expected_param_value" ] 84 check_err $? "Unexpected $phase_name $name param value" 85 value=$(<$DEBUGFS_DIR/$name) 86 check_err $? "Failed to get $name debugfs value" 87 [ "$value" == "$expected_debugfs_value" ] 88 check_err $? "Unexpected $phase_name $name debugfs value" 89} 90 91params_test() 92{ 93 RET=0 94 95 local max_macs 96 local test1 97 98 check_value max_macs initial 32 32 99 check_value test1 initial true Y 100 101 param_set max_macs 16 102 check_err $? "Failed to set max_macs param value" 103 param_set test1 false 104 check_err $? "Failed to set test1 param value" 105 106 check_value max_macs post-set 16 32 107 check_value test1 post-set false Y 108 109 devlink dev reload $DL_HANDLE 110 111 check_value max_macs post-reload 16 16 112 check_value test1 post-reload false N 113 114 log_test "params test" 115} 116 117check_region_size() 118{ 119 local name=$1 120 local size 121 122 size=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].size') 123 check_err $? "Failed to get $name region size" 124 [ $size -eq 32768 ] 125 check_err $? "Invalid $name region size" 126} 127 128check_region_snapshot_count() 129{ 130 local name=$1 131 local phase_name=$2 132 local expected_count=$3 133 local count 134 135 count=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].snapshot | length') 136 [ $count -eq $expected_count ] 137 check_err $? "Unexpected $phase_name snapshot count" 138} 139 140regions_test() 141{ 142 RET=0 143 144 local count 145 146 check_region_size dummy 147 check_region_snapshot_count dummy initial 0 148 149 echo ""> $DEBUGFS_DIR/take_snapshot 150 check_err $? "Failed to take first dummy region snapshot" 151 check_region_snapshot_count dummy post-first-snapshot 1 152 153 echo ""> $DEBUGFS_DIR/take_snapshot 154 check_err $? "Failed to take second dummy region snapshot" 155 check_region_snapshot_count dummy post-second-snapshot 2 156 157 echo ""> $DEBUGFS_DIR/take_snapshot 158 check_err $? "Failed to take third dummy region snapshot" 159 check_region_snapshot_count dummy post-third-snapshot 3 160 161 devlink region del $DL_HANDLE/dummy snapshot 1 162 check_err $? "Failed to delete first dummy region snapshot" 163 164 check_region_snapshot_count dummy post-first-delete 2 165 166 devlink region new $DL_HANDLE/dummy snapshot 25 167 check_err $? "Failed to create a new snapshot with id 25" 168 169 check_region_snapshot_count dummy post-first-request 3 170 171 devlink region dump $DL_HANDLE/dummy snapshot 25 >> /dev/null 172 check_err $? "Failed to dump snapshot with id 25" 173 174 devlink region read $DL_HANDLE/dummy snapshot 25 addr 0 len 1 >> /dev/null 175 check_err $? "Failed to read snapshot with id 25 (1 byte)" 176 177 devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len 128 >> /dev/null 178 check_err $? "Failed to read snapshot with id 25 (128 bytes)" 179 180 devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len $((1<<32)) >> /dev/null 181 check_err $? "Failed to read snapshot with id 25 (oversized)" 182 183 devlink region read $DL_HANDLE/dummy snapshot 25 addr $((1<<32)) len 128 >> /dev/null 2>&1 184 check_fail $? "Bad read of snapshot with id 25 did not fail" 185 186 devlink region del $DL_HANDLE/dummy snapshot 25 187 check_err $? "Failed to delete snapshot with id 25" 188 189 check_region_snapshot_count dummy post-second-delete 2 190 191 sid=$(devlink -j region new $DL_HANDLE/dummy | jq '.[][][][]') 192 check_err $? "Failed to create a new snapshot with id allocated by the kernel" 193 194 check_region_snapshot_count dummy post-first-request 3 195 196 devlink region dump $DL_HANDLE/dummy snapshot $sid >> /dev/null 197 check_err $? "Failed to dump a snapshot with id allocated by the kernel" 198 199 devlink region del $DL_HANDLE/dummy snapshot $sid 200 check_err $? "Failed to delete snapshot with id allocated by the kernel" 201 202 check_region_snapshot_count dummy post-first-request 2 203 204 log_test "regions test" 205} 206 207reload_test() 208{ 209 RET=0 210 211 devlink dev reload $DL_HANDLE 212 check_err $? "Failed to reload" 213 214 echo "y"> $DEBUGFS_DIR/fail_reload 215 check_err $? "Failed to setup devlink reload to fail" 216 217 devlink dev reload $DL_HANDLE 218 check_fail $? "Unexpected success of devlink reload" 219 220 echo "n"> $DEBUGFS_DIR/fail_reload 221 check_err $? "Failed to setup devlink reload not to fail" 222 223 devlink dev reload $DL_HANDLE 224 check_err $? "Failed to reload after set not to fail" 225 226 echo "y"> $DEBUGFS_DIR/dont_allow_reload 227 check_err $? "Failed to forbid devlink reload" 228 229 devlink dev reload $DL_HANDLE 230 check_fail $? "Unexpected success of devlink reload" 231 232 echo "n"> $DEBUGFS_DIR/dont_allow_reload 233 check_err $? "Failed to re-enable devlink reload" 234 235 devlink dev reload $DL_HANDLE 236 check_err $? "Failed to reload after re-enable" 237 238 log_test "reload test" 239} 240 241netns_reload_test() 242{ 243 RET=0 244 245 ip netns add testns1 246 check_err $? "Failed add netns \"testns1\"" 247 ip netns add testns2 248 check_err $? "Failed add netns \"testns2\"" 249 250 devlink dev reload $DL_HANDLE netns testns1 251 check_err $? "Failed to reload into netns \"testns1\"" 252 253 devlink -N testns1 dev reload $DL_HANDLE netns testns2 254 check_err $? "Failed to reload from netns \"testns1\" into netns \"testns2\"" 255 256 ip netns del testns2 257 ip netns del testns1 258 259 log_test "netns reload test" 260} 261 262DUMMYDEV="dummytest" 263 264res_val_get() 265{ 266 local netns=$1 267 local parentname=$2 268 local name=$3 269 local type=$4 270 271 cmd_jq "devlink -N $netns resource show $DL_HANDLE -j" \ 272 ".[][][] | select(.name == \"$parentname\").resources[] \ 273 | select(.name == \"$name\").$type" 274} 275 276resource_test() 277{ 278 RET=0 279 280 ip netns add testns1 281 check_err $? "Failed add netns \"testns1\"" 282 ip netns add testns2 283 check_err $? "Failed add netns \"testns2\"" 284 285 devlink dev reload $DL_HANDLE netns testns1 286 check_err $? "Failed to reload into netns \"testns1\"" 287 288 # Create dummy dev to add the address and routes on. 289 290 ip -n testns1 link add name $DUMMYDEV type dummy 291 check_err $? "Failed create dummy device" 292 ip -n testns1 link set $DUMMYDEV up 293 check_err $? "Failed bring up dummy device" 294 ip -n testns1 a a 192.0.1.1/24 dev $DUMMYDEV 295 check_err $? "Failed add an IP address to dummy device" 296 297 local occ=$(res_val_get testns1 IPv4 fib occ) 298 local limit=$((occ+1)) 299 300 # Set fib size limit to handle one another route only. 301 302 devlink -N testns1 resource set $DL_HANDLE path IPv4/fib size $limit 303 check_err $? "Failed to set IPv4/fib resource size" 304 local size_new=$(res_val_get testns1 IPv4 fib size_new) 305 [ "$size_new" -eq "$limit" ] 306 check_err $? "Unexpected \"size_new\" value (got $size_new, expected $limit)" 307 308 devlink -N testns1 dev reload $DL_HANDLE 309 check_err $? "Failed to reload" 310 local size=$(res_val_get testns1 IPv4 fib size) 311 [ "$size" -eq "$limit" ] 312 check_err $? "Unexpected \"size\" value (got $size, expected $limit)" 313 314 # Insert 2 routes, the first is going to be inserted, 315 # the second is expected to fail to be inserted. 316 317 ip -n testns1 r a 192.0.2.0/24 via 192.0.1.2 318 check_err $? "Failed to add route" 319 320 ip -n testns1 r a 192.0.3.0/24 via 192.0.1.2 321 check_fail $? "Unexpected successful route add over limit" 322 323 # Now create another dummy in second network namespace and 324 # insert two routes. That is over the limit of the netdevsim 325 # instance in the first namespace. Move the netdevsim instance 326 # into the second namespace and expect it to fail. 327 328 ip -n testns2 link add name $DUMMYDEV type dummy 329 check_err $? "Failed create dummy device" 330 ip -n testns2 link set $DUMMYDEV up 331 check_err $? "Failed bring up dummy device" 332 ip -n testns2 a a 192.0.1.1/24 dev $DUMMYDEV 333 check_err $? "Failed add an IP address to dummy device" 334 ip -n testns2 r a 192.0.2.0/24 via 192.0.1.2 335 check_err $? "Failed to add route" 336 ip -n testns2 r a 192.0.3.0/24 via 192.0.1.2 337 check_err $? "Failed to add route" 338 339 devlink -N testns1 dev reload $DL_HANDLE netns testns2 340 check_fail $? "Unexpected successful reload from netns \"testns1\" into netns \"testns2\"" 341 342 devlink -N testns2 resource set $DL_HANDLE path IPv4/fib size ' -1' 343 check_err $? "Failed to reset IPv4/fib resource size" 344 345 devlink -N testns2 dev reload $DL_HANDLE netns 1 346 check_err $? "Failed to reload devlink back" 347 348 ip netns del testns2 349 ip netns del testns1 350 351 log_test "resource test" 352} 353 354info_get() 355{ 356 local name=$1 357 358 cmd_jq "devlink dev info $DL_HANDLE -j" ".[][][\"$name\"]" "-e" 359} 360 361dev_info_test() 362{ 363 RET=0 364 365 driver=$(info_get "driver") 366 check_err $? "Failed to get driver name" 367 [ "$driver" == "netdevsim" ] 368 check_err $? "Unexpected driver name $driver" 369 370 log_test "dev_info test" 371} 372 373empty_reporter_test() 374{ 375 RET=0 376 377 devlink health show $DL_HANDLE reporter empty >/dev/null 378 check_err $? "Failed show empty reporter" 379 380 devlink health dump show $DL_HANDLE reporter empty >/dev/null 381 check_err $? "Failed show dump of empty reporter" 382 383 devlink health diagnose $DL_HANDLE reporter empty >/dev/null 384 check_err $? "Failed diagnose empty reporter" 385 386 devlink health recover $DL_HANDLE reporter empty 387 check_err $? "Failed recover empty reporter" 388 389 log_test "empty reporter test" 390} 391 392check_reporter_info() 393{ 394 local name=$1 395 local expected_state=$2 396 local expected_error=$3 397 local expected_recover=$4 398 local expected_grace_period=$5 399 local expected_auto_recover=$6 400 401 local show=$(devlink health show $DL_HANDLE reporter $name -j | jq -e -r ".[][][]") 402 check_err $? "Failed show $name reporter" 403 404 local state=$(echo $show | jq -r ".state") 405 [ "$state" == "$expected_state" ] 406 check_err $? "Unexpected \"state\" value (got $state, expected $expected_state)" 407 408 local error=$(echo $show | jq -r ".error") 409 [ "$error" == "$expected_error" ] 410 check_err $? "Unexpected \"error\" value (got $error, expected $expected_error)" 411 412 local recover=`echo $show | jq -r ".recover"` 413 [ "$recover" == "$expected_recover" ] 414 check_err $? "Unexpected \"recover\" value (got $recover, expected $expected_recover)" 415 416 local grace_period=$(echo $show | jq -r ".grace_period") 417 check_err $? "Failed get $name reporter grace_period" 418 [ "$grace_period" == "$expected_grace_period" ] 419 check_err $? "Unexpected \"grace_period\" value (got $grace_period, expected $expected_grace_period)" 420 421 local auto_recover=$(echo $show | jq -r ".auto_recover") 422 [ "$auto_recover" == "$expected_auto_recover" ] 423 check_err $? "Unexpected \"auto_recover\" value (got $auto_recover, expected $expected_auto_recover)" 424} 425 426dummy_reporter_test() 427{ 428 RET=0 429 430 check_reporter_info dummy healthy 0 0 0 true 431 432 devlink health set $DL_HANDLE reporter dummy auto_recover false 433 check_err $? "Failed to dummy reporter auto_recover option" 434 435 check_reporter_info dummy healthy 0 0 0 false 436 437 local BREAK_MSG="foo bar" 438 echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health 439 check_err $? "Failed to break dummy reporter" 440 441 check_reporter_info dummy error 1 0 0 false 442 443 local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) 444 check_err $? "Failed show dump of dummy reporter" 445 446 local dump_break_msg=$(echo $dump | jq -r ".break_message") 447 [ "$dump_break_msg" == "$BREAK_MSG" ] 448 check_err $? "Unexpected dump break message value (got $dump_break_msg, expected $BREAK_MSG)" 449 450 devlink health dump clear $DL_HANDLE reporter dummy 451 check_err $? "Failed clear dump of dummy reporter" 452 453 devlink health recover $DL_HANDLE reporter dummy 454 check_err $? "Failed recover dummy reporter" 455 456 check_reporter_info dummy healthy 1 1 0 false 457 458 devlink health set $DL_HANDLE reporter dummy auto_recover true 459 check_err $? "Failed to dummy reporter auto_recover option" 460 461 check_reporter_info dummy healthy 1 1 0 true 462 463 echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health 464 check_err $? "Failed to break dummy reporter" 465 466 check_reporter_info dummy healthy 2 2 0 true 467 468 local diagnose=$(devlink health diagnose $DL_HANDLE reporter dummy -j -p) 469 check_err $? "Failed show diagnose of dummy reporter" 470 471 local rcvrd_break_msg=$(echo $diagnose | jq -r ".recovered_break_message") 472 [ "$rcvrd_break_msg" == "$BREAK_MSG" ] 473 check_err $? "Unexpected recovered break message value (got $rcvrd_break_msg, expected $BREAK_MSG)" 474 475 devlink health set $DL_HANDLE reporter dummy grace_period 10 476 check_err $? "Failed to dummy reporter grace_period option" 477 478 check_reporter_info dummy healthy 2 2 10 true 479 480 echo "Y"> $DEBUGFS_DIR/health/fail_recover 481 check_err $? "Failed set dummy reporter recovery to fail" 482 483 echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health 484 check_fail $? "Unexpected success of dummy reporter break" 485 486 check_reporter_info dummy error 3 2 10 true 487 488 devlink health recover $DL_HANDLE reporter dummy 489 check_fail $? "Unexpected success of dummy reporter recover" 490 491 echo "N"> $DEBUGFS_DIR/health/fail_recover 492 check_err $? "Failed set dummy reporter recovery to be successful" 493 494 devlink health recover $DL_HANDLE reporter dummy 495 check_err $? "Failed recover dummy reporter" 496 497 check_reporter_info dummy healthy 3 3 10 true 498 499 echo 8192 > $DEBUGFS_DIR/health/binary_len 500 check_err $? "Failed set dummy reporter binary len to 8192" 501 502 local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) 503 check_err $? "Failed show dump of dummy reporter" 504 505 devlink health dump clear $DL_HANDLE reporter dummy 506 check_err $? "Failed clear dump of dummy reporter" 507 508 log_test "dummy reporter test" 509} 510 511rate_leafs_get() 512{ 513 local handle=$1 514 515 cmd_jq "devlink port function rate show -j" \ 516 '.[] | to_entries | .[] | select(.value.type == "leaf") | .key | select(contains("'$handle'"))' 517} 518 519rate_nodes_get() 520{ 521 local handle=$1 522 523 cmd_jq "devlink port function rate show -j" \ 524 '.[] | to_entries | .[] | select(.value.type == "node") | .key | select(contains("'$handle'"))' 525} 526 527rate_attr_set() 528{ 529 local handle=$1 530 local name=$2 531 local value=$3 532 local units=$4 533 534 devlink port function rate set $handle $name $value$units 535} 536 537rate_attr_get() 538{ 539 local handle=$1 540 local name=$2 541 542 cmd_jq "devlink port function rate show $handle -j" '.[][].'$name 543} 544 545rate_attr_tx_rate_check() 546{ 547 local handle=$1 548 local name=$2 549 local rate=$3 550 local debug_file=$4 551 552 rate_attr_set $handle $name $rate mbit 553 check_err $? "Failed to set $name value" 554 555 local debug_value=$(cat $debug_file) 556 check_err $? "Failed to read $name value from debugfs" 557 [ "$debug_value" == "$rate" ] 558 check_err $? "Unexpected $name debug value $debug_value != $rate" 559 560 local api_value=$(( $(rate_attr_get $handle $name) * 8 / 1000000 )) 561 check_err $? "Failed to get $name attr value" 562 [ "$api_value" == "$rate" ] 563 check_err $? "Unexpected $name attr value $api_value != $rate" 564} 565 566rate_attr_parent_check() 567{ 568 local handle=$1 569 local parent=$2 570 local debug_file=$3 571 572 rate_attr_set $handle parent $parent 573 check_err $? "Failed to set parent" 574 575 debug_value=$(cat $debug_file) 576 check_err $? "Failed to get parent debugfs value" 577 [ "$debug_value" == "$parent" ] 578 check_err $? "Unexpected parent debug value $debug_value != $parent" 579 580 api_value=$(rate_attr_get $r_obj parent) 581 check_err $? "Failed to get parent attr value" 582 [ "$api_value" == "$parent" ] 583 check_err $? "Unexpected parent attr value $api_value != $parent" 584} 585 586rate_node_add() 587{ 588 local handle=$1 589 590 devlink port function rate add $handle 591} 592 593rate_node_del() 594{ 595 local handle=$1 596 597 devlink port function rate del $handle 598} 599 600rate_test() 601{ 602 RET=0 603 604 echo $VF_COUNT > /sys/bus/netdevsim/devices/$DEV_NAME/sriov_numvfs 605 devlink dev eswitch set $DL_HANDLE mode switchdev 606 local leafs=`rate_leafs_get $DL_HANDLE` 607 local num_leafs=`echo $leafs | wc -w` 608 [ "$num_leafs" == "$VF_COUNT" ] 609 check_err $? "Expected $VF_COUNT rate leafs but got $num_leafs" 610 611 rate=10 612 for r_obj in $leafs 613 do 614 rate_attr_tx_rate_check $r_obj tx_share $rate \ 615 $DEBUGFS_DIR/ports/${r_obj##*/}/tx_share 616 rate=$(($rate+10)) 617 done 618 619 rate=100 620 for r_obj in $leafs 621 do 622 rate_attr_tx_rate_check $r_obj tx_max $rate \ 623 $DEBUGFS_DIR/ports/${r_obj##*/}/tx_max 624 rate=$(($rate+100)) 625 done 626 627 local node1_name='group1' 628 local node1="$DL_HANDLE/$node1_name" 629 rate_node_add "$node1" 630 check_err $? "Failed to add node $node1" 631 632 local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` 633 [ $num_nodes == 1 ] 634 check_err $? "Expected 1 rate node in output but got $num_nodes" 635 636 local node_tx_share=10 637 rate_attr_tx_rate_check $node1 tx_share $node_tx_share \ 638 $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_share 639 640 local node_tx_max=100 641 rate_attr_tx_rate_check $node1 tx_max $node_tx_max \ 642 $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_max 643 644 rate_node_del "$node1" 645 check_err $? "Failed to delete node $node1" 646 local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` 647 [ $num_nodes == 0 ] 648 check_err $? "Expected 0 rate node but got $num_nodes" 649 650 local node1_name='group1' 651 local node1="$DL_HANDLE/$node1_name" 652 rate_node_add "$node1" 653 check_err $? "Failed to add node $node1" 654 655 rate_attr_parent_check $r_obj $node1_name \ 656 $DEBUGFS_DIR/ports/${r_obj##*/}/rate_parent 657 658 local node2_name='group2' 659 local node2="$DL_HANDLE/$node2_name" 660 rate_node_add "$node2" 661 check_err $? "Failed to add node $node2" 662 663 rate_attr_parent_check $node2 $node1_name \ 664 $DEBUGFS_DIR/rate_nodes/$node2_name/rate_parent 665 rate_node_del "$node2" 666 check_err $? "Failed to delete node $node2" 667 rate_attr_set "$r_obj" noparent 668 check_err $? "Failed to unset $r_obj parent node" 669 rate_node_del "$node1" 670 check_err $? "Failed to delete node $node1" 671 672 log_test "rate test" 673} 674 675setup_prepare() 676{ 677 modprobe netdevsim 678 echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device 679 while [ ! -d $SYSFS_NET_DIR ] ; do :; done 680} 681 682cleanup() 683{ 684 pre_cleanup 685 echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device 686 modprobe -r netdevsim 687} 688 689trap cleanup EXIT 690 691setup_prepare 692 693tests_run 694 695exit $EXIT_STATUS 696