1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# A test for strict prioritization of traffic in the switch. Run two streams of
5# traffic, each through a different ingress port, one tagged with PCP of 1, the
6# other with PCP of 2. Both streams converge at one egress port, where they are
7# assigned TC of, respectively, 1 and 2, with strict priority configured between
8# them. In H3, we expect to see (almost) exclusively the high-priority traffic.
9#
10# Please see qos_mc_aware.sh for an explanation of why we use mausezahn and
11# counters instead of just running iperf3.
12#
13# +---------------------------+                 +-----------------------------+
14# | H1                        |                 |                          H2 |
15# |         $h1.111 +         |                 |         + $h2.222           |
16# |   192.0.2.33/28 |         |                 |         | 192.0.2.65/28     |
17# |   e-qos-map 0:1 |         |                 |         | e-qos-map 0:2     |
18# |                 |         |                 |         |                   |
19# |             $h1 +         |                 |         + $h2               |
20# +-----------------|---------+                 +---------|-------------------+
21#                   |                                     |
22# +-----------------|-------------------------------------|-------------------+
23# |           $swp1 +                                     + $swp2             |
24# |          >1Gbps |                                     | >1Gbps            |
25# | +---------------|-----------+              +----------|----------------+  |
26# | |     $swp1.111 +           |              |          + $swp2.222      |  |
27# | |                     BR111 |       SW     | BR222                     |  |
28# | |     $swp3.111 +           |              |          + $swp3.222      |  |
29# | +---------------|-----------+              +----------|----------------+  |
30# |                 \_____________________________________/                   |
31# |                                    |                                      |
32# |                                    + $swp3                                |
33# |                                    | 1Gbps bottleneck                     |
34# |                                    | ETS: (up n->tc n for n in 0..7)      |
35# |                                    |      strict priority                 |
36# +------------------------------------|--------------------------------------+
37#                                      |
38#                 +--------------------|--------------------+
39#                 |                    + $h3             H3 |
40#                 |                   / \                   |
41#                 |                  /   \                  |
42#                 |         $h3.111 +     + $h3.222         |
43#                 |  192.0.2.34/28          192.0.2.66/28   |
44#                 +-----------------------------------------+
45
46ALL_TESTS="
47	ping_ipv4
48	test_ets_strict
49"
50
51lib_dir=$(dirname $0)/../../../net/forwarding
52
53NUM_NETIFS=6
54source $lib_dir/lib.sh
55source $lib_dir/devlink_lib.sh
56source qos_lib.sh
57
58h1_create()
59{
60	simple_if_init $h1
61	mtu_set $h1 10000
62
63	vlan_create $h1 111 v$h1 192.0.2.33/28
64	ip link set dev $h1.111 type vlan egress-qos-map 0:1
65}
66
67h1_destroy()
68{
69	vlan_destroy $h1 111
70
71	mtu_restore $h1
72	simple_if_fini $h1
73}
74
75h2_create()
76{
77	simple_if_init $h2
78	mtu_set $h2 10000
79
80	vlan_create $h2 222 v$h2 192.0.2.65/28
81	ip link set dev $h2.222 type vlan egress-qos-map 0:2
82}
83
84h2_destroy()
85{
86	vlan_destroy $h2 222
87
88	mtu_restore $h2
89	simple_if_fini $h2
90}
91
92h3_create()
93{
94	simple_if_init $h3
95	mtu_set $h3 10000
96
97	vlan_create $h3 111 v$h3 192.0.2.34/28
98	vlan_create $h3 222 v$h3 192.0.2.66/28
99}
100
101h3_destroy()
102{
103	vlan_destroy $h3 222
104	vlan_destroy $h3 111
105
106	mtu_restore $h3
107	simple_if_fini $h3
108}
109
110switch_create()
111{
112	ip link set dev $swp1 up
113	mtu_set $swp1 10000
114
115	ip link set dev $swp2 up
116	mtu_set $swp2 10000
117
118	# prio n -> TC n, strict scheduling
119	lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7
120	lldptool -T -i $swp3 -V ETS-CFG tsa=$(
121			)"0:strict,"$(
122			)"1:strict,"$(
123			)"2:strict,"$(
124			)"3:strict,"$(
125			)"4:strict,"$(
126			)"5:strict,"$(
127			)"6:strict,"$(
128			)"7:strict"
129	sleep 1
130
131	ip link set dev $swp3 up
132	mtu_set $swp3 10000
133	tc qdisc replace dev $swp3 root handle 101: tbf rate 1gbit \
134		burst 128K limit 1G
135
136	vlan_create $swp1 111
137	vlan_create $swp2 222
138	vlan_create $swp3 111
139	vlan_create $swp3 222
140
141	ip link add name br111 type bridge vlan_filtering 0
142	ip link set dev br111 addrgenmode none
143	ip link set dev br111 up
144	ip link set dev $swp1.111 master br111
145	ip link set dev $swp3.111 master br111
146
147	ip link add name br222 type bridge vlan_filtering 0
148	ip link set dev br222 addrgenmode none
149	ip link set dev br222 up
150	ip link set dev $swp2.222 master br222
151	ip link set dev $swp3.222 master br222
152
153	# Make sure that ingress quotas are smaller than egress so that there is
154	# room for both streams of traffic to be admitted to shared buffer.
155	devlink_pool_size_thtype_save 0
156	devlink_pool_size_thtype_set 0 dynamic 10000000
157	devlink_pool_size_thtype_save 4
158	devlink_pool_size_thtype_set 4 dynamic 10000000
159
160	devlink_port_pool_th_save $swp1 0
161	devlink_port_pool_th_set $swp1 0 6
162	devlink_tc_bind_pool_th_save $swp1 1 ingress
163	devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6
164
165	devlink_port_pool_th_save $swp2 0
166	devlink_port_pool_th_set $swp2 0 6
167	devlink_tc_bind_pool_th_save $swp2 2 ingress
168	devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6
169
170	devlink_tc_bind_pool_th_save $swp3 1 egress
171	devlink_tc_bind_pool_th_set $swp3 1 egress 4 7
172	devlink_tc_bind_pool_th_save $swp3 2 egress
173	devlink_tc_bind_pool_th_set $swp3 2 egress 4 7
174	devlink_port_pool_th_save $swp3 4
175	devlink_port_pool_th_set $swp3 4 7
176}
177
178switch_destroy()
179{
180	devlink_port_pool_th_restore $swp3 4
181	devlink_tc_bind_pool_th_restore $swp3 2 egress
182	devlink_tc_bind_pool_th_restore $swp3 1 egress
183
184	devlink_tc_bind_pool_th_restore $swp2 2 ingress
185	devlink_port_pool_th_restore $swp2 0
186
187	devlink_tc_bind_pool_th_restore $swp1 1 ingress
188	devlink_port_pool_th_restore $swp1 0
189
190	devlink_pool_size_thtype_restore 4
191	devlink_pool_size_thtype_restore 0
192
193	ip link del dev br222
194	ip link del dev br111
195
196	vlan_destroy $swp3 222
197	vlan_destroy $swp3 111
198	vlan_destroy $swp2 222
199	vlan_destroy $swp1 111
200
201	tc qdisc del dev $swp3 root handle 101:
202	mtu_restore $swp3
203	ip link set dev $swp3 down
204	lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0
205
206	mtu_restore $swp2
207	ip link set dev $swp2 down
208
209	mtu_restore $swp1
210	ip link set dev $swp1 down
211}
212
213setup_prepare()
214{
215	h1=${NETIFS[p1]}
216	swp1=${NETIFS[p2]}
217
218	swp2=${NETIFS[p3]}
219	h2=${NETIFS[p4]}
220
221	swp3=${NETIFS[p5]}
222	h3=${NETIFS[p6]}
223
224	h3mac=$(mac_get $h3)
225
226	vrf_prepare
227
228	h1_create
229	h2_create
230	h3_create
231	switch_create
232}
233
234cleanup()
235{
236	pre_cleanup
237
238	switch_destroy
239	h3_destroy
240	h2_destroy
241	h1_destroy
242
243	vrf_cleanup
244}
245
246ping_ipv4()
247{
248	ping_test $h1 192.0.2.34 " from H1"
249	ping_test $h2 192.0.2.66 " from H2"
250}
251
252rel()
253{
254	local old=$1; shift
255	local new=$1; shift
256
257	bc <<< "
258	    scale=2
259	    ret = 100 * $new / $old
260	    if (ret > 0) { ret } else { 0 }
261	"
262}
263
264test_ets_strict()
265{
266	RET=0
267
268	# Run high-prio traffic on its own.
269	start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac
270	local -a rate_2
271	rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2"))
272	check_err $? "Could not get high enough prio-2 ingress rate"
273	local rate_2_in=${rate_2[0]}
274	local rate_2_eg=${rate_2[1]}
275	stop_traffic # $h2.222
276
277	# Start low-prio stream.
278	start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac
279
280	local -a rate_1
281	rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1"))
282	check_err $? "Could not get high enough prio-1 ingress rate"
283	local rate_1_in=${rate_1[0]}
284	local rate_1_eg=${rate_1[1]}
285
286	# High-prio and low-prio on their own should have about the same
287	# throughput.
288	local rel21=$(rel $rate_1_eg $rate_2_eg)
289	check_err $(bc <<< "$rel21 < 95")
290	check_err $(bc <<< "$rel21 > 105")
291
292	# Start the high-prio stream--now both streams run.
293	start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac
294	rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1"))
295	check_err $? "Could not get high enough prio-2 ingress rate with prio-1"
296	local rate_3_in=${rate_3[0]}
297	local rate_3_eg=${rate_3[1]}
298	stop_traffic # $h2.222
299
300	stop_traffic # $h1.111
301
302	# High-prio should have about the same throughput whether or not
303	# low-prio is in the system.
304	local rel32=$(rel $rate_2_eg $rate_3_eg)
305	check_err $(bc <<< "$rel32 < 95")
306
307	log_test "strict priority"
308	echo "Ingress to switch:"
309	echo "  p1 in rate            $(humanize $rate_1_in)"
310	echo "  p2 in rate            $(humanize $rate_2_in)"
311	echo "  p2 in rate w/ p1      $(humanize $rate_3_in)"
312	echo "Egress from switch:"
313	echo "  p1 eg rate            $(humanize $rate_1_eg)"
314	echo "  p2 eg rate            $(humanize $rate_2_eg) ($rel21% of p1)"
315	echo "  p2 eg rate w/ p1      $(humanize $rate_3_eg) ($rel32% of p2)"
316}
317
318trap cleanup EXIT
319
320setup_prepare
321setup_wait
322
323tests_run
324
325exit $EXIT_STATUS
326