1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3# 4# Test devlink-trap policer functionality over mlxsw. 5 6# +---------------------------------+ 7# | H1 (vrf) | 8# | + $h1 | 9# | | 192.0.2.1/24 | 10# | | | 11# | | default via 192.0.2.2 | 12# +----|----------------------------+ 13# | 14# +----|----------------------------------------------------------------------+ 15# | SW | | 16# | + $rp1 | 17# | 192.0.2.2/24 | 18# | | 19# | 198.51.100.2/24 | 20# | + $rp2 | 21# | | | 22# +----|----------------------------------------------------------------------+ 23# | 24# +----|----------------------------+ 25# | | default via 198.51.100.2 | 26# | | | 27# | | 198.51.100.1/24 | 28# | + $h2 | 29# | H2 (vrf) | 30# +---------------------------------+ 31 32lib_dir=$(dirname $0)/../../../net/forwarding 33 34ALL_TESTS=" 35 rate_limits_test 36 burst_limits_test 37 rate_test 38 burst_test 39" 40NUM_NETIFS=4 41source $lib_dir/tc_common.sh 42source $lib_dir/lib.sh 43source $lib_dir/devlink_lib.sh 44 45h1_create() 46{ 47 simple_if_init $h1 192.0.2.1/24 48 mtu_set $h1 10000 49 50 ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 51} 52 53h1_destroy() 54{ 55 ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 56 57 mtu_restore $h1 58 simple_if_fini $h1 192.0.2.1/24 59} 60 61h2_create() 62{ 63 simple_if_init $h2 198.51.100.1/24 64 mtu_set $h2 10000 65 66 ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 67} 68 69h2_destroy() 70{ 71 ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 72 73 mtu_restore $h2 74 simple_if_fini $h2 198.51.100.1/24 75} 76 77router_create() 78{ 79 ip link set dev $rp1 up 80 ip link set dev $rp2 up 81 82 __addr_add_del $rp1 add 192.0.2.2/24 83 __addr_add_del $rp2 add 198.51.100.2/24 84 mtu_set $rp1 10000 85 mtu_set $rp2 10000 86 87 ip -4 route add blackhole 198.51.100.100 88 89 devlink trap set $DEVLINK_DEV trap blackhole_route action trap 90} 91 92router_destroy() 93{ 94 devlink trap set $DEVLINK_DEV trap blackhole_route action drop 95 96 ip -4 route del blackhole 198.51.100.100 97 98 mtu_restore $rp2 99 mtu_restore $rp1 100 __addr_add_del $rp2 del 198.51.100.2/24 101 __addr_add_del $rp1 del 192.0.2.2/24 102 103 ip link set dev $rp2 down 104 ip link set dev $rp1 down 105} 106 107setup_prepare() 108{ 109 h1=${NETIFS[p1]} 110 rp1=${NETIFS[p2]} 111 112 rp2=${NETIFS[p3]} 113 h2=${NETIFS[p4]} 114 115 rp1_mac=$(mac_get $rp1) 116 117 vrf_prepare 118 119 h1_create 120 h2_create 121 122 router_create 123} 124 125cleanup() 126{ 127 pre_cleanup 128 129 router_destroy 130 131 h2_destroy 132 h1_destroy 133 134 vrf_cleanup 135 136 # Reload to ensure devlink-trap settings are back to default. 137 devlink_reload 138} 139 140rate_limits_test() 141{ 142 RET=0 143 144 devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null 145 check_fail $? "Policer rate was changed to rate lower than limit" 146 devlink trap policer set $DEVLINK_DEV policer 1 \ 147 rate 2000000001 &> /dev/null 148 check_fail $? "Policer rate was changed to rate higher than limit" 149 150 devlink trap policer set $DEVLINK_DEV policer 1 rate 1 151 check_err $? "Failed to set policer rate to minimum" 152 devlink trap policer set $DEVLINK_DEV policer 1 rate 2000000000 153 check_err $? "Failed to set policer rate to maximum" 154 155 log_test "Trap policer rate limits" 156} 157 158burst_limits_test() 159{ 160 RET=0 161 162 devlink trap policer set $DEVLINK_DEV policer 1 burst 0 &> /dev/null 163 check_fail $? "Policer burst size was changed to 0" 164 devlink trap policer set $DEVLINK_DEV policer 1 burst 17 &> /dev/null 165 check_fail $? "Policer burst size was changed to burst size that is not power of 2" 166 devlink trap policer set $DEVLINK_DEV policer 1 burst 8 &> /dev/null 167 check_fail $? "Policer burst size was changed to burst size lower than limit" 168 devlink trap policer set $DEVLINK_DEV policer 1 \ 169 burst $((2**25)) &> /dev/null 170 check_fail $? "Policer burst size was changed to burst size higher than limit" 171 172 devlink trap policer set $DEVLINK_DEV policer 1 burst 16 173 check_err $? "Failed to set policer burst size to minimum" 174 devlink trap policer set $DEVLINK_DEV policer 1 burst $((2**24)) 175 check_err $? "Failed to set policer burst size to maximum" 176 177 log_test "Trap policer burst size limits" 178} 179 180trap_rate_get() 181{ 182 local t0 t1 183 184 t0=$(devlink_trap_rx_packets_get blackhole_route) 185 sleep 10 186 t1=$(devlink_trap_rx_packets_get blackhole_route) 187 188 echo $(((t1 - t0) / 10)) 189} 190 191policer_drop_rate_get() 192{ 193 local id=$1; shift 194 local t0 t1 195 196 t0=$(devlink_trap_policer_rx_dropped_get $id) 197 sleep 10 198 t1=$(devlink_trap_policer_rx_dropped_get $id) 199 200 echo $(((t1 - t0) / 10)) 201} 202 203__rate_test() 204{ 205 local rate pct drop_rate 206 local id=$1; shift 207 208 RET=0 209 210 devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 211 devlink trap group set $DEVLINK_DEV group l3_drops policer $id 212 213 # Send packets at highest possible rate and make sure they are dropped 214 # by the policer. Make sure measured received rate is about 1000 pps 215 log_info "=== Tx rate: Highest, Policer rate: 1000 pps ===" 216 217 start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac 218 219 sleep 5 # Take measurements when rate is stable 220 221 rate=$(trap_rate_get) 222 pct=$((100 * (rate - 1000) / 1000)) 223 ((-10 <= pct && pct <= 10)) 224 check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%" 225 log_info "Expected rate 1000 pps, measured rate $rate pps" 226 227 drop_rate=$(policer_drop_rate_get $id) 228 (( drop_rate > 0 )) 229 check_err $? "Expected non-zero policer drop rate, got 0" 230 log_info "Measured policer drop rate of $drop_rate pps" 231 232 stop_traffic 233 234 # Send packets at a rate of 1000 pps and make sure they are not dropped 235 # by the policer 236 log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ===" 237 238 start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec 239 240 sleep 5 # Take measurements when rate is stable 241 242 drop_rate=$(policer_drop_rate_get $id) 243 (( drop_rate == 0 )) 244 check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" 245 log_info "Measured policer drop rate of $drop_rate pps" 246 247 stop_traffic 248 249 # Unbind the policer and send packets at highest possible rate. Make 250 # sure they are not dropped by the policer and that the measured 251 # received rate is higher than 1000 pps 252 log_info "=== Tx rate: Highest, Policer rate: No policer ===" 253 254 devlink trap group set $DEVLINK_DEV group l3_drops nopolicer 255 256 start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac 257 258 rate=$(trap_rate_get) 259 (( rate > 1000 )) 260 check_err $? "Expected rate higher than 1000 pps, got $rate pps" 261 log_info "Measured rate $rate pps" 262 263 drop_rate=$(policer_drop_rate_get $id) 264 (( drop_rate == 0 )) 265 check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" 266 log_info "Measured policer drop rate of $drop_rate pps" 267 268 stop_traffic 269 270 log_test "Trap policer rate" 271} 272 273rate_test() 274{ 275 local id 276 277 for id in $(devlink_trap_policer_ids_get); do 278 echo 279 log_info "Running rate test for policer $id" 280 __rate_test $id 281 done 282} 283 284__burst_test() 285{ 286 local t0_rx t0_drop t1_rx t1_drop rx drop 287 local id=$1; shift 288 289 RET=0 290 291 devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 292 devlink trap group set $DEVLINK_DEV group l3_drops policer $id 293 294 # Send a burst of 16 packets and make sure that 16 are received 295 # and that none are dropped by the policer 296 log_info "=== Tx burst size: 16, Policer burst size: 512 ===" 297 298 t0_rx=$(devlink_trap_rx_packets_get blackhole_route) 299 t0_drop=$(devlink_trap_policer_rx_dropped_get $id) 300 301 start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 16 302 303 t1_rx=$(devlink_trap_rx_packets_get blackhole_route) 304 t1_drop=$(devlink_trap_policer_rx_dropped_get $id) 305 306 rx=$((t1_rx - t0_rx)) 307 (( rx == 16 )) 308 check_err $? "Expected burst size of 16 packets, got $rx packets" 309 log_info "Expected burst size of 16 packets, measured burst size of $rx packets" 310 311 drop=$((t1_drop - t0_drop)) 312 (( drop == 0 )) 313 check_err $? "Expected zero policer drops, got $drop" 314 log_info "Measured policer drops of $drop packets" 315 316 # Unbind the policer and send a burst of 64 packets. Make sure that 317 # 64 packets are received and that none are dropped by the policer 318 log_info "=== Tx burst size: 64, Policer burst size: No policer ===" 319 320 devlink trap group set $DEVLINK_DEV group l3_drops nopolicer 321 322 t0_rx=$(devlink_trap_rx_packets_get blackhole_route) 323 t0_drop=$(devlink_trap_policer_rx_dropped_get $id) 324 325 start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64 326 327 t1_rx=$(devlink_trap_rx_packets_get blackhole_route) 328 t1_drop=$(devlink_trap_policer_rx_dropped_get $id) 329 330 rx=$((t1_rx - t0_rx)) 331 (( rx == 64 )) 332 check_err $? "Expected burst size of 64 packets, got $rx packets" 333 log_info "Expected burst size of 64 packets, measured burst size of $rx packets" 334 335 drop=$((t1_drop - t0_drop)) 336 (( drop == 0 )) 337 check_err $? "Expected zero policer drops, got $drop" 338 log_info "Measured policer drops of $drop packets" 339 340 log_test "Trap policer burst size" 341} 342 343burst_test() 344{ 345 local id 346 347 for id in $(devlink_trap_policer_ids_get); do 348 echo 349 log_info "Running burst size test for policer $id" 350 __burst_test $id 351 done 352} 353 354trap cleanup EXIT 355 356setup_prepare 357setup_wait 358 359tests_run 360 361exit $EXIT_STATUS 362