1# SPDX-License-Identifier: GPL-2.0 2include ../../../build/Build.include 3include ../../../scripts/Makefile.arch 4include ../../../scripts/Makefile.include 5 6CXX ?= $(CROSS_COMPILE)g++ 7 8CURDIR := $(abspath .) 9TOOLSDIR := $(abspath ../../..) 10LIBDIR := $(TOOLSDIR)/lib 11BPFDIR := $(LIBDIR)/bpf 12TOOLSINCDIR := $(TOOLSDIR)/include 13BPFTOOLDIR := $(TOOLSDIR)/bpf/bpftool 14APIDIR := $(TOOLSINCDIR)/uapi 15GENDIR := $(abspath ../../../../include/generated) 16GENHDR := $(GENDIR)/autoconf.h 17 18ifneq ($(wildcard $(GENHDR)),) 19 GENFLAGS := -DHAVE_GENHDR 20endif 21 22BPF_GCC ?= $(shell command -v bpf-gcc;) 23SAN_CFLAGS ?= 24CFLAGS += -g -O0 -rdynamic -Wall $(GENFLAGS) $(SAN_CFLAGS) \ 25 -I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) \ 26 -I$(TOOLSINCDIR) -I$(APIDIR) -I$(OUTPUT) \ 27 -Dbpf_prog_load=bpf_prog_test_load \ 28 -Dbpf_load_program=bpf_test_load_program 29LDLIBS += -lcap -lelf -lz -lrt -lpthread 30 31# Silence some warnings when compiled with clang 32ifneq ($(LLVM),) 33CFLAGS += -Wno-unused-command-line-argument 34endif 35 36# Order correspond to 'make run_tests' order 37TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \ 38 test_verifier_log test_dev_cgroup \ 39 test_sock test_sockmap get_cgroup_id_user \ 40 test_cgroup_storage \ 41 test_tcpnotify_user test_sysctl \ 42 test_progs-no_alu32 43 44# Also test bpf-gcc, if present 45ifneq ($(BPF_GCC),) 46TEST_GEN_PROGS += test_progs-bpf_gcc 47endif 48 49TEST_GEN_FILES = test_lwt_ip_encap.o \ 50 test_tc_edt.o 51TEST_FILES = xsk_prereqs.sh \ 52 $(wildcard progs/btf_dump_test_case_*.c) 53 54# Order correspond to 'make run_tests' order 55TEST_PROGS := test_kmod.sh \ 56 test_xdp_redirect.sh \ 57 test_xdp_redirect_multi.sh \ 58 test_xdp_meta.sh \ 59 test_xdp_veth.sh \ 60 test_offload.py \ 61 test_sock_addr.sh \ 62 test_tunnel.sh \ 63 test_lwt_seg6local.sh \ 64 test_lirc_mode2.sh \ 65 test_skb_cgroup_id.sh \ 66 test_flow_dissector.sh \ 67 test_xdp_vlan_mode_generic.sh \ 68 test_xdp_vlan_mode_native.sh \ 69 test_lwt_ip_encap.sh \ 70 test_tcp_check_syncookie.sh \ 71 test_tc_tunnel.sh \ 72 test_tc_edt.sh \ 73 test_xdping.sh \ 74 test_bpftool_build.sh \ 75 test_bpftool.sh \ 76 test_bpftool_metadata.sh \ 77 test_doc_build.sh \ 78 test_xsk.sh 79 80TEST_PROGS_EXTENDED := with_addr.sh \ 81 with_tunnels.sh \ 82 test_xdp_vlan.sh test_bpftool.py 83 84# Compile but not part of 'make run_tests' 85TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \ 86 flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \ 87 test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \ 88 xdpxceiver xdp_redirect_multi 89 90TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read 91 92# Emit succinct information message describing current building step 93# $1 - generic step name (e.g., CC, LINK, etc); 94# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor]; 95# $3 - target (assumed to be file); only file name will be emitted; 96# $4 - optional extra arg, emitted as-is, if provided. 97ifeq ($(V),1) 98Q = 99msg = 100else 101Q = @ 102msg = @printf ' %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))"; 103MAKEFLAGS += --no-print-directory 104submake_extras := feature_display=0 105endif 106 107# override lib.mk's default rules 108OVERRIDE_TARGETS := 1 109override define CLEAN 110 $(call msg,CLEAN) 111 $(Q)$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN) 112 $(Q)$(MAKE) -C bpf_testmod clean 113 $(Q)$(MAKE) docs-clean 114endef 115 116include ../lib.mk 117 118SCRATCH_DIR := $(OUTPUT)/tools 119BUILD_DIR := $(SCRATCH_DIR)/build 120INCLUDE_DIR := $(SCRATCH_DIR)/include 121BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a 122ifneq ($(CROSS_COMPILE),) 123HOST_BUILD_DIR := $(BUILD_DIR)/host 124HOST_SCRATCH_DIR := $(OUTPUT)/host-tools 125else 126HOST_BUILD_DIR := $(BUILD_DIR) 127HOST_SCRATCH_DIR := $(SCRATCH_DIR) 128endif 129HOST_BPFOBJ := $(HOST_BUILD_DIR)/libbpf/libbpf.a 130RESOLVE_BTFIDS := $(HOST_BUILD_DIR)/resolve_btfids/resolve_btfids 131 132VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ 133 $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ 134 ../../../../vmlinux \ 135 /sys/kernel/btf/vmlinux \ 136 /boot/vmlinux-$(shell uname -r) 137VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS)))) 138ifeq ($(VMLINUX_BTF),) 139$(error Cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)") 140endif 141 142# Define simple and short `make test_progs`, `make test_sysctl`, etc targets 143# to build individual tests. 144# NOTE: Semicolon at the end is critical to override lib.mk's default static 145# rule for binaries. 146$(notdir $(TEST_GEN_PROGS) \ 147 $(TEST_PROGS) \ 148 $(TEST_PROGS_EXTENDED) \ 149 $(TEST_GEN_PROGS_EXTENDED) \ 150 $(TEST_CUSTOM_PROGS)): %: $(OUTPUT)/% ; 151 152# sort removes libbpf duplicates when not cross-building 153MAKE_DIRS := $(sort $(BUILD_DIR)/libbpf $(HOST_BUILD_DIR)/libbpf \ 154 $(HOST_BUILD_DIR)/bpftool $(HOST_BUILD_DIR)/resolve_btfids \ 155 $(INCLUDE_DIR)) 156$(MAKE_DIRS): 157 $(call msg,MKDIR,,$@) 158 $(Q)mkdir -p $@ 159 160$(OUTPUT)/%.o: %.c 161 $(call msg,CC,,$@) 162 $(Q)$(CC) $(CFLAGS) -c $(filter %.c,$^) $(LDLIBS) -o $@ 163 164$(OUTPUT)/%:%.c 165 $(call msg,BINARY,,$@) 166 $(Q)$(LINK.c) $^ $(LDLIBS) -o $@ 167 168$(OUTPUT)/urandom_read: urandom_read.c 169 $(call msg,BINARY,,$@) 170 $(Q)$(CC) $(LDFLAGS) -o $@ $< $(LDLIBS) -Wl,--build-id=sha1 171 172$(OUTPUT)/bpf_testmod.ko: $(VMLINUX_BTF) $(wildcard bpf_testmod/Makefile bpf_testmod/*.[ch]) 173 $(call msg,MOD,,$@) 174 $(Q)$(RM) bpf_testmod/bpf_testmod.ko # force re-compilation 175 $(Q)$(MAKE) $(submake_extras) -C bpf_testmod 176 $(Q)cp bpf_testmod/bpf_testmod.ko $@ 177 178$(OUTPUT)/test_stub.o: test_stub.c $(BPFOBJ) 179 $(call msg,CC,,$@) 180 $(Q)$(CC) -c $(CFLAGS) -o $@ $< 181 182DEFAULT_BPFTOOL := $(HOST_SCRATCH_DIR)/sbin/bpftool 183 184$(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL) 185 $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \ 186 OUTPUT=$(SCRATCH_DIR)/ VMLINUX_BTF=$(VMLINUX_BTF) \ 187 BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) && \ 188 cp $(SCRATCH_DIR)/runqslower $@ 189 190TEST_GEN_PROGS_EXTENDED += $(DEFAULT_BPFTOOL) 191 192$(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ) 193 194$(OUTPUT)/test_dev_cgroup: cgroup_helpers.c 195$(OUTPUT)/test_skb_cgroup_id_user: cgroup_helpers.c 196$(OUTPUT)/test_sock: cgroup_helpers.c 197$(OUTPUT)/test_sock_addr: cgroup_helpers.c 198$(OUTPUT)/test_sockmap: cgroup_helpers.c 199$(OUTPUT)/test_tcpnotify_user: cgroup_helpers.c trace_helpers.c 200$(OUTPUT)/get_cgroup_id_user: cgroup_helpers.c 201$(OUTPUT)/test_cgroup_storage: cgroup_helpers.c 202$(OUTPUT)/test_sock_fields: cgroup_helpers.c 203$(OUTPUT)/test_sysctl: cgroup_helpers.c 204 205BPFTOOL ?= $(DEFAULT_BPFTOOL) 206$(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \ 207 $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/bpftool 208 $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ 209 CC=$(HOSTCC) LD=$(HOSTLD) \ 210 EXTRA_CFLAGS='-g -O0' \ 211 OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \ 212 prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install 213 214all: docs 215 216docs: 217 $(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras) \ 218 -f Makefile.docs \ 219 prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@ 220 221docs-clean: 222 $(Q)$(MAKE) $(submake_extras) \ 223 -f Makefile.docs \ 224 prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@ 225 226$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ 227 ../../../include/uapi/linux/bpf.h \ 228 | $(INCLUDE_DIR) $(BUILD_DIR)/libbpf 229 $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ 230 EXTRA_CFLAGS='-g -O0' \ 231 DESTDIR=$(SCRATCH_DIR) prefix= all install_headers 232 233ifneq ($(BPFOBJ),$(HOST_BPFOBJ)) 234$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ 235 ../../../include/uapi/linux/bpf.h \ 236 | $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf 237 $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \ 238 EXTRA_CFLAGS='-g -O0' \ 239 OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \ 240 DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers 241endif 242 243$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR) 244ifeq ($(VMLINUX_H),) 245 $(call msg,GEN,,$@) 246 $(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@ 247else 248 $(call msg,CP,,$@) 249 $(Q)cp "$(VMLINUX_H)" $@ 250endif 251 252$(RESOLVE_BTFIDS): $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/resolve_btfids \ 253 $(TOOLSDIR)/bpf/resolve_btfids/main.c \ 254 $(TOOLSDIR)/lib/rbtree.c \ 255 $(TOOLSDIR)/lib/zalloc.c \ 256 $(TOOLSDIR)/lib/string.c \ 257 $(TOOLSDIR)/lib/ctype.c \ 258 $(TOOLSDIR)/lib/str_error_r.c 259 $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/resolve_btfids \ 260 CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) \ 261 OUTPUT=$(HOST_BUILD_DIR)/resolve_btfids/ BPFOBJ=$(HOST_BPFOBJ) 262 263# Get Clang's default includes on this system, as opposed to those seen by 264# '-target bpf'. This fixes "missing" files on some architectures/distros, 265# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. 266# 267# Use '-idirafter': Don't interfere with include mechanics except where the 268# build would have failed anyways. 269define get_sys_includes 270$(shell $(1) -v -E - </dev/null 2>&1 \ 271 | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ 272$(shell $(1) -dM -E - </dev/null | grep '#define __riscv_xlen ' | sed 's/#define /-D/' | sed 's/ /=/') 273endef 274 275# Determine target endianness. 276IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \ 277 grep 'define __BYTE_ORDER__ __ORDER_LITTLE_ENDIAN__') 278MENDIAN=$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) 279 280CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG)) 281BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) $(MENDIAN) \ 282 -I$(INCLUDE_DIR) -I$(CURDIR) -I$(APIDIR) \ 283 -I$(abspath $(OUTPUT)/../usr/include) 284 285CLANG_CFLAGS = $(CLANG_SYS_INCLUDES) \ 286 -Wno-compare-distinct-pointer-types 287 288$(OUTPUT)/test_l4lb_noinline.o: BPF_CFLAGS += -fno-inline 289$(OUTPUT)/test_xdp_noinline.o: BPF_CFLAGS += -fno-inline 290 291$(OUTPUT)/flow_dissector_load.o: flow_dissector_load.h 292 293# Build BPF object using Clang 294# $1 - input .c file 295# $2 - output .o file 296# $3 - CFLAGS 297define CLANG_BPF_BUILD_RULE 298 $(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2) 299 $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v3 300endef 301# Similar to CLANG_BPF_BUILD_RULE, but with disabled alu32 302define CLANG_NOALU32_BPF_BUILD_RULE 303 $(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2) 304 $(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v2 305endef 306# Build BPF object using GCC 307define GCC_BPF_BUILD_RULE 308 $(call msg,GCC-BPF,$(TRUNNER_BINARY),$2) 309 $(Q)$(BPF_GCC) $3 -O2 -c $1 -o $2 310endef 311 312SKEL_BLACKLIST := btf__% test_pinning_invalid.c test_sk_assign.c 313 314LINKED_SKELS := test_static_linked.skel.h linked_funcs.skel.h \ 315 linked_vars.skel.h linked_maps.skel.h 316 317LSKELS := kfunc_call_test.c fentry_test.c fexit_test.c fexit_sleep.c \ 318 test_ksyms_module.c test_ringbuf.c atomics.c trace_printk.c 319SKEL_BLACKLIST += $$(LSKELS) 320 321test_static_linked.skel.h-deps := test_static_linked1.o test_static_linked2.o 322linked_funcs.skel.h-deps := linked_funcs1.o linked_funcs2.o 323linked_vars.skel.h-deps := linked_vars1.o linked_vars2.o 324linked_maps.skel.h-deps := linked_maps1.o linked_maps2.o 325 326LINKED_BPF_SRCS := $(patsubst %.o,%.c,$(foreach skel,$(LINKED_SKELS),$($(skel)-deps))) 327 328# Set up extra TRUNNER_XXX "temporary" variables in the environment (relies on 329# $eval()) and pass control to DEFINE_TEST_RUNNER_RULES. 330# Parameters: 331# $1 - test runner base binary name (e.g., test_progs) 332# $2 - test runner extra "flavor" (e.g., no_alu32, gcc-bpf, etc) 333define DEFINE_TEST_RUNNER 334 335TRUNNER_OUTPUT := $(OUTPUT)$(if $2,/)$2 336TRUNNER_BINARY := $1$(if $2,-)$2 337TRUNNER_TEST_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.test.o, \ 338 $$(notdir $$(wildcard $(TRUNNER_TESTS_DIR)/*.c))) 339TRUNNER_EXTRA_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.o, \ 340 $$(filter %.c,$(TRUNNER_EXTRA_SOURCES))) 341TRUNNER_EXTRA_HDRS := $$(filter %.h,$(TRUNNER_EXTRA_SOURCES)) 342TRUNNER_TESTS_HDR := $(TRUNNER_TESTS_DIR)/tests.h 343TRUNNER_BPF_SRCS := $$(notdir $$(wildcard $(TRUNNER_BPF_PROGS_DIR)/*.c)) 344TRUNNER_BPF_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.o, $$(TRUNNER_BPF_SRCS)) 345TRUNNER_BPF_SKELS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.skel.h, \ 346 $$(filter-out $(SKEL_BLACKLIST) $(LINKED_BPF_SRCS),\ 347 $$(TRUNNER_BPF_SRCS))) 348TRUNNER_BPF_LSKELS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.lskel.h, $$(LSKELS)) 349TRUNNER_BPF_SKELS_LINKED := $$(addprefix $$(TRUNNER_OUTPUT)/,$(LINKED_SKELS)) 350TEST_GEN_FILES += $$(TRUNNER_BPF_OBJS) 351 352# Evaluate rules now with extra TRUNNER_XXX variables above already defined 353$$(eval $$(call DEFINE_TEST_RUNNER_RULES,$1,$2)) 354 355endef 356 357# Using TRUNNER_XXX variables, provided by callers of DEFINE_TEST_RUNNER and 358# set up by DEFINE_TEST_RUNNER itself, create test runner build rules with: 359# $1 - test runner base binary name (e.g., test_progs) 360# $2 - test runner extra "flavor" (e.g., no_alu32, gcc-bpf, etc) 361define DEFINE_TEST_RUNNER_RULES 362 363ifeq ($($(TRUNNER_OUTPUT)-dir),) 364$(TRUNNER_OUTPUT)-dir := y 365$(TRUNNER_OUTPUT): 366 $$(call msg,MKDIR,,$$@) 367 $(Q)mkdir -p $$@ 368endif 369 370# ensure we set up BPF objects generation rule just once for a given 371# input/output directory combination 372ifeq ($($(TRUNNER_BPF_PROGS_DIR)$(if $2,-)$2-bpfobjs),) 373$(TRUNNER_BPF_PROGS_DIR)$(if $2,-)$2-bpfobjs := y 374$(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o: \ 375 $(TRUNNER_BPF_PROGS_DIR)/%.c \ 376 $(TRUNNER_BPF_PROGS_DIR)/*.h \ 377 $$(INCLUDE_DIR)/vmlinux.h \ 378 $(wildcard $(BPFDIR)/bpf_*.h) | $(TRUNNER_OUTPUT) 379 $$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@, \ 380 $(TRUNNER_BPF_CFLAGS)) 381 382$(TRUNNER_BPF_SKELS): %.skel.h: %.o $(BPFTOOL) | $(TRUNNER_OUTPUT) 383 $$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@) 384 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked1.o) $$< 385 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked2.o) $$(<:.o=.linked1.o) 386 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked3.o) $$(<:.o=.linked2.o) 387 $(Q)diff $$(<:.o=.linked2.o) $$(<:.o=.linked3.o) 388 $(Q)$$(BPFTOOL) gen skeleton $$(<:.o=.linked3.o) name $$(notdir $$(<:.o=)) > $$@ 389 390$(TRUNNER_BPF_LSKELS): %.lskel.h: %.o $(BPFTOOL) | $(TRUNNER_OUTPUT) 391 $$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@) 392 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked1.o) $$< 393 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked2.o) $$(<:.o=.linked1.o) 394 $(Q)$$(BPFTOOL) gen object $$(<:.o=.linked3.o) $$(<:.o=.linked2.o) 395 $(Q)diff $$(<:.o=.linked2.o) $$(<:.o=.linked3.o) 396 $(Q)$$(BPFTOOL) gen skeleton -L $$(<:.o=.linked3.o) name $$(notdir $$(<:.o=)) > $$@ 397 398$(TRUNNER_BPF_SKELS_LINKED): $(TRUNNER_BPF_OBJS) $(BPFTOOL) | $(TRUNNER_OUTPUT) 399 $$(call msg,LINK-BPF,$(TRUNNER_BINARY),$$(@:.skel.h=.o)) 400 $(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked1.o) $$(addprefix $(TRUNNER_OUTPUT)/,$$($$(@F)-deps)) 401 $(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked2.o) $$(@:.skel.h=.linked1.o) 402 $(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked3.o) $$(@:.skel.h=.linked2.o) 403 $(Q)diff $$(@:.skel.h=.linked2.o) $$(@:.skel.h=.linked3.o) 404 $$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@) 405 $(Q)$$(BPFTOOL) gen skeleton $$(@:.skel.h=.linked3.o) name $$(notdir $$(@:.skel.h=)) > $$@ 406endif 407 408# ensure we set up tests.h header generation rule just once 409ifeq ($($(TRUNNER_TESTS_DIR)-tests-hdr),) 410$(TRUNNER_TESTS_DIR)-tests-hdr := y 411$(TRUNNER_TESTS_HDR): $(TRUNNER_TESTS_DIR)/*.c 412 $$(call msg,TEST-HDR,$(TRUNNER_BINARY),$$@) 413 $$(shell ( cd $(TRUNNER_TESTS_DIR); \ 414 echo '/* Generated header, do not edit */'; \ 415 ls *.c 2> /dev/null | \ 416 sed -e 's@\([^\.]*\)\.c@DEFINE_TEST(\1)@'; \ 417 ) > $$@) 418endif 419 420# compile individual test files 421# Note: we cd into output directory to ensure embedded BPF object is found 422$(TRUNNER_TEST_OBJS): $(TRUNNER_OUTPUT)/%.test.o: \ 423 $(TRUNNER_TESTS_DIR)/%.c \ 424 $(TRUNNER_EXTRA_HDRS) \ 425 $(TRUNNER_BPF_OBJS) \ 426 $(TRUNNER_BPF_SKELS) \ 427 $(TRUNNER_BPF_LSKELS) \ 428 $(TRUNNER_BPF_SKELS_LINKED) \ 429 $$(BPFOBJ) | $(TRUNNER_OUTPUT) 430 $$(call msg,TEST-OBJ,$(TRUNNER_BINARY),$$@) 431 $(Q)cd $$(@D) && $$(CC) -I. $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F) 432 433$(TRUNNER_EXTRA_OBJS): $(TRUNNER_OUTPUT)/%.o: \ 434 %.c \ 435 $(TRUNNER_EXTRA_HDRS) \ 436 $(TRUNNER_TESTS_HDR) \ 437 $$(BPFOBJ) | $(TRUNNER_OUTPUT) 438 $$(call msg,EXT-OBJ,$(TRUNNER_BINARY),$$@) 439 $(Q)$$(CC) $$(CFLAGS) -c $$< $$(LDLIBS) -o $$@ 440 441# non-flavored in-srctree builds receive special treatment, in particular, we 442# do not need to copy extra resources (see e.g. test_btf_dump_case()) 443$(TRUNNER_BINARY)-extras: $(TRUNNER_EXTRA_FILES) | $(TRUNNER_OUTPUT) 444ifneq ($2:$(OUTPUT),:$(shell pwd)) 445 $$(call msg,EXT-COPY,$(TRUNNER_BINARY),$(TRUNNER_EXTRA_FILES)) 446 $(Q)rsync -aq $$^ $(TRUNNER_OUTPUT)/ 447endif 448 449$(OUTPUT)/$(TRUNNER_BINARY): $(TRUNNER_TEST_OBJS) \ 450 $(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) \ 451 $(RESOLVE_BTFIDS) \ 452 | $(TRUNNER_BINARY)-extras 453 $$(call msg,BINARY,,$$@) 454 $(Q)$$(CC) $$(CFLAGS) $$(filter %.a %.o,$$^) $$(LDLIBS) -o $$@ 455 $(Q)$(RESOLVE_BTFIDS) --no-fail --btf $(TRUNNER_OUTPUT)/btf_data.o $$@ 456 457endef 458 459# Define test_progs test runner. 460TRUNNER_TESTS_DIR := prog_tests 461TRUNNER_BPF_PROGS_DIR := progs 462TRUNNER_EXTRA_SOURCES := test_progs.c cgroup_helpers.c trace_helpers.c \ 463 network_helpers.c testing_helpers.c \ 464 btf_helpers.c flow_dissector_load.h 465TRUNNER_EXTRA_FILES := $(OUTPUT)/urandom_read $(OUTPUT)/bpf_testmod.ko \ 466 ima_setup.sh \ 467 $(wildcard progs/btf_dump_test_case_*.c) 468TRUNNER_BPF_BUILD_RULE := CLANG_BPF_BUILD_RULE 469TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS) 470TRUNNER_BPF_CFLAGS += -DENABLE_ATOMICS_TESTS 471$(eval $(call DEFINE_TEST_RUNNER,test_progs)) 472 473# Define test_progs-no_alu32 test runner. 474TRUNNER_BPF_BUILD_RULE := CLANG_NOALU32_BPF_BUILD_RULE 475TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS) 476$(eval $(call DEFINE_TEST_RUNNER,test_progs,no_alu32)) 477 478# Define test_progs BPF-GCC-flavored test runner. 479ifneq ($(BPF_GCC),) 480TRUNNER_BPF_BUILD_RULE := GCC_BPF_BUILD_RULE 481TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(call get_sys_includes,gcc) 482$(eval $(call DEFINE_TEST_RUNNER,test_progs,bpf_gcc)) 483endif 484 485# Define test_maps test runner. 486TRUNNER_TESTS_DIR := map_tests 487TRUNNER_BPF_PROGS_DIR := progs 488TRUNNER_EXTRA_SOURCES := test_maps.c 489TRUNNER_EXTRA_FILES := 490TRUNNER_BPF_BUILD_RULE := $$(error no BPF objects should be built) 491TRUNNER_BPF_CFLAGS := 492$(eval $(call DEFINE_TEST_RUNNER,test_maps)) 493 494# Define test_verifier test runner. 495# It is much simpler than test_maps/test_progs and sufficiently different from 496# them (e.g., test.h is using completely pattern), that it's worth just 497# explicitly defining all the rules explicitly. 498verifier/tests.h: verifier/*.c 499 $(shell ( cd verifier/; \ 500 echo '/* Generated header, do not edit */'; \ 501 echo '#ifdef FILL_ARRAY'; \ 502 ls *.c 2> /dev/null | sed -e 's@\(.*\)@#include \"\1\"@'; \ 503 echo '#endif' \ 504 ) > verifier/tests.h) 505$(OUTPUT)/test_verifier: test_verifier.c verifier/tests.h $(BPFOBJ) | $(OUTPUT) 506 $(call msg,BINARY,,$@) 507 $(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@ 508 509# Make sure we are able to include and link libbpf against c++. 510$(OUTPUT)/test_cpp: test_cpp.cpp $(OUTPUT)/test_core_extern.skel.h $(BPFOBJ) 511 $(call msg,CXX,,$@) 512 $(Q)$(CXX) $(CFLAGS) $(filter %.a %.o %.cpp,$^) $(LDLIBS) -o $@ 513 514# Benchmark runner 515$(OUTPUT)/bench_%.o: benchs/bench_%.c bench.h 516 $(call msg,CC,,$@) 517 $(Q)$(CC) $(CFLAGS) -c $(filter %.c,$^) $(LDLIBS) -o $@ 518$(OUTPUT)/bench_rename.o: $(OUTPUT)/test_overhead.skel.h 519$(OUTPUT)/bench_trigger.o: $(OUTPUT)/trigger_bench.skel.h 520$(OUTPUT)/bench_ringbufs.o: $(OUTPUT)/ringbuf_bench.skel.h \ 521 $(OUTPUT)/perfbuf_bench.skel.h 522$(OUTPUT)/bench.o: bench.h testing_helpers.h 523$(OUTPUT)/bench: LDLIBS += -lm 524$(OUTPUT)/bench: $(OUTPUT)/bench.o $(OUTPUT)/testing_helpers.o \ 525 $(OUTPUT)/bench_count.o \ 526 $(OUTPUT)/bench_rename.o \ 527 $(OUTPUT)/bench_trigger.o \ 528 $(OUTPUT)/bench_ringbufs.o 529 $(call msg,BINARY,,$@) 530 $(Q)$(CC) $(LDFLAGS) -o $@ $(filter %.a %.o,$^) $(LDLIBS) 531 532EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR) \ 533 prog_tests/tests.h map_tests/tests.h verifier/tests.h \ 534 feature \ 535 $(addprefix $(OUTPUT)/,*.o *.skel.h *.lskel.h no_alu32 bpf_gcc bpf_testmod.ko) 536 537.PHONY: docs docs-clean 538