1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * SPI testing utility (using spidev driver)
4 *
5 * Copyright (c) 2007 MontaVista Software, Inc.
6 * Copyright (c) 2007 Anton Vorontsov <avorontsov@ru.mvista.com>
7 *
8 * Cross-compile with cross-gcc -I/path/to/cross-kernel/include
9 */
10
11 #include <stdint.h>
12 #include <unistd.h>
13 #include <stdio.h>
14 #include <stdlib.h>
15 #include <string.h>
16 #include <errno.h>
17 #include <getopt.h>
18 #include <fcntl.h>
19 #include <time.h>
20 #include <sys/ioctl.h>
21 #include <linux/ioctl.h>
22 #include <sys/stat.h>
23 #include <linux/types.h>
24 #include <linux/spi/spidev.h>
25
26 #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
27
pabort(const char * s)28 static void pabort(const char *s)
29 {
30 if (errno != 0)
31 perror(s);
32 else
33 printf("%s\n", s);
34
35 abort();
36 }
37
38 static const char *device = "/dev/spidev1.1";
39 static uint32_t mode;
40 static uint8_t bits = 8;
41 static char *input_file;
42 static char *output_file;
43 static uint32_t speed = 500000;
44 static uint16_t delay;
45 static int verbose;
46 static int transfer_size;
47 static int iterations;
48 static int interval = 5; /* interval in seconds for showing transfer rate */
49
50 static uint8_t default_tx[] = {
51 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
52 0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
53 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
54 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
55 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
56 0xF0, 0x0D,
57 };
58
59 static uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
60 static char *input_tx;
61
hex_dump(const void * src,size_t length,size_t line_size,char * prefix)62 static void hex_dump(const void *src, size_t length, size_t line_size,
63 char *prefix)
64 {
65 int i = 0;
66 const unsigned char *address = src;
67 const unsigned char *line = address;
68 unsigned char c;
69
70 printf("%s | ", prefix);
71 while (length-- > 0) {
72 printf("%02X ", *address++);
73 if (!(++i % line_size) || (length == 0 && i % line_size)) {
74 if (length == 0) {
75 while (i++ % line_size)
76 printf("__ ");
77 }
78 printf(" |");
79 while (line < address) {
80 c = *line++;
81 printf("%c", (c < 32 || c > 126) ? '.' : c);
82 }
83 printf("|\n");
84 if (length > 0)
85 printf("%s | ", prefix);
86 }
87 }
88 }
89
90 /*
91 * Unescape - process hexadecimal escape character
92 * converts shell input "\x23" -> 0x23
93 */
unescape(char * _dst,char * _src,size_t len)94 static int unescape(char *_dst, char *_src, size_t len)
95 {
96 int ret = 0;
97 int match;
98 char *src = _src;
99 char *dst = _dst;
100 unsigned int ch;
101
102 while (*src) {
103 if (*src == '\\' && *(src+1) == 'x') {
104 match = sscanf(src + 2, "%2x", &ch);
105 if (!match)
106 pabort("malformed input string");
107
108 src += 4;
109 *dst++ = (unsigned char)ch;
110 } else {
111 *dst++ = *src++;
112 }
113 ret++;
114 }
115 return ret;
116 }
117
transfer(int fd,uint8_t const * tx,uint8_t const * rx,size_t len)118 static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
119 {
120 int ret;
121 int out_fd;
122 struct spi_ioc_transfer tr = {
123 .tx_buf = (unsigned long)tx,
124 .rx_buf = (unsigned long)rx,
125 .len = len,
126 .delay_usecs = delay,
127 .speed_hz = speed,
128 .bits_per_word = bits,
129 };
130
131 if (mode & SPI_TX_OCTAL)
132 tr.tx_nbits = 8;
133 else if (mode & SPI_TX_QUAD)
134 tr.tx_nbits = 4;
135 else if (mode & SPI_TX_DUAL)
136 tr.tx_nbits = 2;
137 if (mode & SPI_RX_OCTAL)
138 tr.rx_nbits = 8;
139 else if (mode & SPI_RX_QUAD)
140 tr.rx_nbits = 4;
141 else if (mode & SPI_RX_DUAL)
142 tr.rx_nbits = 2;
143 if (!(mode & SPI_LOOP)) {
144 if (mode & (SPI_TX_OCTAL | SPI_TX_QUAD | SPI_TX_DUAL))
145 tr.rx_buf = 0;
146 else if (mode & (SPI_RX_OCTAL | SPI_RX_QUAD | SPI_RX_DUAL))
147 tr.tx_buf = 0;
148 }
149
150 ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
151 if (ret < 1)
152 pabort("can't send spi message");
153
154 if (verbose)
155 hex_dump(tx, len, 32, "TX");
156
157 if (output_file) {
158 out_fd = open(output_file, O_WRONLY | O_CREAT | O_TRUNC, 0666);
159 if (out_fd < 0)
160 pabort("could not open output file");
161
162 ret = write(out_fd, rx, len);
163 if (ret != len)
164 pabort("not all bytes written to output file");
165
166 close(out_fd);
167 }
168
169 if (verbose)
170 hex_dump(rx, len, 32, "RX");
171 }
172
print_usage(const char * prog)173 static void print_usage(const char *prog)
174 {
175 printf("Usage: %s [-2348CDFHILMNORSZbdilopsv]\n", prog);
176 puts("general device settings:\n"
177 " -D --device device to use (default /dev/spidev1.1)\n"
178 " -s --speed max speed (Hz)\n"
179 " -d --delay delay (usec)\n"
180 " -l --loop loopback\n"
181 "spi mode:\n"
182 " -H --cpha clock phase\n"
183 " -O --cpol clock polarity\n"
184 " -F --rx-cpha-flip flip CPHA on Rx only xfer\n"
185 "number of wires for transmission:\n"
186 " -2 --dual dual transfer\n"
187 " -4 --quad quad transfer\n"
188 " -8 --octal octal transfer\n"
189 " -3 --3wire SI/SO signals shared\n"
190 " -Z --3wire-hiz high impedance turnaround\n"
191 "data:\n"
192 " -i --input input data from a file (e.g. \"test.bin\")\n"
193 " -o --output output data to a file (e.g. \"results.bin\")\n"
194 " -p Send data (e.g. \"1234\\xde\\xad\")\n"
195 " -S --size transfer size\n"
196 " -I --iter iterations\n"
197 "additional parameters:\n"
198 " -b --bpw bits per word\n"
199 " -L --lsb least significant bit first\n"
200 " -C --cs-high chip select active high\n"
201 " -N --no-cs no chip select\n"
202 " -R --ready slave pulls low to pause\n"
203 " -M --mosi-idle-low leave mosi line low when idle\n"
204 "misc:\n"
205 " -v --verbose Verbose (show tx buffer)\n");
206 exit(1);
207 }
208
parse_opts(int argc,char * argv[])209 static void parse_opts(int argc, char *argv[])
210 {
211 while (1) {
212 static const struct option lopts[] = {
213 { "device", 1, 0, 'D' },
214 { "speed", 1, 0, 's' },
215 { "delay", 1, 0, 'd' },
216 { "loop", 0, 0, 'l' },
217 { "cpha", 0, 0, 'H' },
218 { "cpol", 0, 0, 'O' },
219 { "rx-cpha-flip", 0, 0, 'F' },
220 { "dual", 0, 0, '2' },
221 { "quad", 0, 0, '4' },
222 { "octal", 0, 0, '8' },
223 { "3wire", 0, 0, '3' },
224 { "3wire-hiz", 0, 0, 'Z' },
225 { "input", 1, 0, 'i' },
226 { "output", 1, 0, 'o' },
227 { "size", 1, 0, 'S' },
228 { "iter", 1, 0, 'I' },
229 { "bpw", 1, 0, 'b' },
230 { "lsb", 0, 0, 'L' },
231 { "cs-high", 0, 0, 'C' },
232 { "no-cs", 0, 0, 'N' },
233 { "ready", 0, 0, 'R' },
234 { "mosi-idle-low", 0, 0, 'M' },
235 { "verbose", 0, 0, 'v' },
236 { NULL, 0, 0, 0 },
237 };
238 int c;
239
240 c = getopt_long(argc, argv, "D:s:d:b:i:o:lHOLC3ZFMNR248p:vS:I:",
241 lopts, NULL);
242
243 if (c == -1)
244 break;
245
246 switch (c) {
247 case 'D':
248 device = optarg;
249 break;
250 case 's':
251 speed = atoi(optarg);
252 break;
253 case 'd':
254 delay = atoi(optarg);
255 break;
256 case 'b':
257 bits = atoi(optarg);
258 break;
259 case 'i':
260 input_file = optarg;
261 break;
262 case 'o':
263 output_file = optarg;
264 break;
265 case 'l':
266 mode |= SPI_LOOP;
267 break;
268 case 'H':
269 mode |= SPI_CPHA;
270 break;
271 case 'O':
272 mode |= SPI_CPOL;
273 break;
274 case 'L':
275 mode |= SPI_LSB_FIRST;
276 break;
277 case 'C':
278 mode |= SPI_CS_HIGH;
279 break;
280 case '3':
281 mode |= SPI_3WIRE;
282 break;
283 case 'Z':
284 mode |= SPI_3WIRE_HIZ;
285 break;
286 case 'F':
287 mode |= SPI_RX_CPHA_FLIP;
288 break;
289 case 'M':
290 mode |= SPI_MOSI_IDLE_LOW;
291 break;
292 case 'N':
293 mode |= SPI_NO_CS;
294 break;
295 case 'v':
296 verbose = 1;
297 break;
298 case 'R':
299 mode |= SPI_READY;
300 break;
301 case 'p':
302 input_tx = optarg;
303 break;
304 case '2':
305 mode |= SPI_TX_DUAL;
306 break;
307 case '4':
308 mode |= SPI_TX_QUAD;
309 break;
310 case '8':
311 mode |= SPI_TX_OCTAL;
312 break;
313 case 'S':
314 transfer_size = atoi(optarg);
315 break;
316 case 'I':
317 iterations = atoi(optarg);
318 break;
319 default:
320 print_usage(argv[0]);
321 }
322 }
323 if (mode & SPI_LOOP) {
324 if (mode & SPI_TX_DUAL)
325 mode |= SPI_RX_DUAL;
326 if (mode & SPI_TX_QUAD)
327 mode |= SPI_RX_QUAD;
328 if (mode & SPI_TX_OCTAL)
329 mode |= SPI_RX_OCTAL;
330 }
331 }
332
transfer_escaped_string(int fd,char * str)333 static void transfer_escaped_string(int fd, char *str)
334 {
335 size_t size = strlen(str);
336 uint8_t *tx;
337 uint8_t *rx;
338
339 tx = malloc(size);
340 if (!tx)
341 pabort("can't allocate tx buffer");
342
343 rx = malloc(size);
344 if (!rx)
345 pabort("can't allocate rx buffer");
346
347 size = unescape((char *)tx, str, size);
348 transfer(fd, tx, rx, size);
349 free(rx);
350 free(tx);
351 }
352
transfer_file(int fd,char * filename)353 static void transfer_file(int fd, char *filename)
354 {
355 ssize_t bytes;
356 struct stat sb;
357 int tx_fd;
358 uint8_t *tx;
359 uint8_t *rx;
360
361 if (stat(filename, &sb) == -1)
362 pabort("can't stat input file");
363
364 tx_fd = open(filename, O_RDONLY);
365 if (tx_fd < 0)
366 pabort("can't open input file");
367
368 tx = malloc(sb.st_size);
369 if (!tx)
370 pabort("can't allocate tx buffer");
371
372 rx = malloc(sb.st_size);
373 if (!rx)
374 pabort("can't allocate rx buffer");
375
376 bytes = read(tx_fd, tx, sb.st_size);
377 if (bytes != sb.st_size)
378 pabort("failed to read input file");
379
380 transfer(fd, tx, rx, sb.st_size);
381 free(rx);
382 free(tx);
383 close(tx_fd);
384 }
385
386 static uint64_t _read_count;
387 static uint64_t _write_count;
388
show_transfer_rate(void)389 static void show_transfer_rate(void)
390 {
391 static uint64_t prev_read_count, prev_write_count;
392 double rx_rate, tx_rate;
393
394 rx_rate = ((_read_count - prev_read_count) * 8) / (interval*1000.0);
395 tx_rate = ((_write_count - prev_write_count) * 8) / (interval*1000.0);
396
397 printf("rate: tx %.1fkbps, rx %.1fkbps\n", rx_rate, tx_rate);
398
399 prev_read_count = _read_count;
400 prev_write_count = _write_count;
401 }
402
transfer_buf(int fd,int len)403 static void transfer_buf(int fd, int len)
404 {
405 uint8_t *tx;
406 uint8_t *rx;
407 int i;
408
409 tx = malloc(len);
410 if (!tx)
411 pabort("can't allocate tx buffer");
412 for (i = 0; i < len; i++)
413 tx[i] = random();
414
415 rx = malloc(len);
416 if (!rx)
417 pabort("can't allocate rx buffer");
418
419 transfer(fd, tx, rx, len);
420
421 _write_count += len;
422 _read_count += len;
423
424 if (mode & SPI_LOOP) {
425 if (memcmp(tx, rx, len)) {
426 fprintf(stderr, "transfer error !\n");
427 hex_dump(tx, len, 32, "TX");
428 hex_dump(rx, len, 32, "RX");
429 exit(1);
430 }
431 }
432
433 free(rx);
434 free(tx);
435 }
436
main(int argc,char * argv[])437 int main(int argc, char *argv[])
438 {
439 int ret = 0;
440 int fd;
441 uint32_t request;
442
443 parse_opts(argc, argv);
444
445 if (input_tx && input_file)
446 pabort("only one of -p and --input may be selected");
447
448 fd = open(device, O_RDWR);
449 if (fd < 0)
450 pabort("can't open device");
451
452 /*
453 * spi mode
454 */
455 /* WR is make a request to assign 'mode' */
456 request = mode;
457 ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode);
458 if (ret == -1)
459 pabort("can't set spi mode");
460
461 /* RD is read what mode the device actually is in */
462 ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode);
463 if (ret == -1)
464 pabort("can't get spi mode");
465 /* Drivers can reject some mode bits without returning an error.
466 * Read the current value to identify what mode it is in, and if it
467 * differs from the requested mode, warn the user.
468 */
469 if (request != mode)
470 printf("WARNING device does not support requested mode 0x%x\n",
471 request);
472
473 /*
474 * bits per word
475 */
476 ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits);
477 if (ret == -1)
478 pabort("can't set bits per word");
479
480 ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits);
481 if (ret == -1)
482 pabort("can't get bits per word");
483
484 /*
485 * max speed hz
486 */
487 ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed);
488 if (ret == -1)
489 pabort("can't set max speed hz");
490
491 ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed);
492 if (ret == -1)
493 pabort("can't get max speed hz");
494
495 printf("spi mode: 0x%x\n", mode);
496 printf("bits per word: %u\n", bits);
497 printf("max speed: %u Hz (%u kHz)\n", speed, speed/1000);
498
499 if (input_tx)
500 transfer_escaped_string(fd, input_tx);
501 else if (input_file)
502 transfer_file(fd, input_file);
503 else if (transfer_size) {
504 struct timespec last_stat;
505
506 clock_gettime(CLOCK_MONOTONIC, &last_stat);
507
508 while (iterations-- > 0) {
509 struct timespec current;
510
511 transfer_buf(fd, transfer_size);
512
513 clock_gettime(CLOCK_MONOTONIC, ¤t);
514 if (current.tv_sec - last_stat.tv_sec > interval) {
515 show_transfer_rate();
516 last_stat = current;
517 }
518 }
519 printf("total: tx %.1fKB, rx %.1fKB\n",
520 _write_count/1024.0, _read_count/1024.0);
521 } else
522 transfer(fd, default_tx, default_rx, sizeof(default_tx));
523
524 close(fd);
525
526 return ret;
527 }
528