1# translation of cs.po to Czech 2# Czech translation for cpufrequtils package 3# Czech messages for cpufrequtils. 4# Copyright (C) 2007 kavol 5# This file is distributed under the same license as the cpufrequtils package. 6# 7# Karel Volný <kavol@seznam.cz>, 2007, 2008. 8msgid "" 9msgstr "" 10"Project-Id-Version: cs\n" 11"Report-Msgid-Bugs-To: \n" 12"POT-Creation-Date: 2011-03-08 17:03+0100\n" 13"PO-Revision-Date: 2008-06-11 16:26+0200\n" 14"Last-Translator: Karel Volný <kavol@seznam.cz>\n" 15"Language-Team: Czech <diskuze@lists.l10n.cz>\n" 16"Language: cs\n" 17"MIME-Version: 1.0\n" 18"Content-Type: text/plain; charset=UTF-8\n" 19"Content-Transfer-Encoding: 8bit\n" 20"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" 21"X-Generator: KBabel 1.11.4\n" 22 23#: utils/idle_monitor/nhm_idle.c:36 24msgid "Processor Core C3" 25msgstr "" 26 27#: utils/idle_monitor/nhm_idle.c:43 28msgid "Processor Core C6" 29msgstr "" 30 31#: utils/idle_monitor/nhm_idle.c:51 32msgid "Processor Package C3" 33msgstr "" 34 35#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 36msgid "Processor Package C6" 37msgstr "" 38 39#: utils/idle_monitor/snb_idle.c:33 40msgid "Processor Core C7" 41msgstr "" 42 43#: utils/idle_monitor/snb_idle.c:40 44msgid "Processor Package C2" 45msgstr "" 46 47#: utils/idle_monitor/snb_idle.c:47 48msgid "Processor Package C7" 49msgstr "" 50 51#: utils/idle_monitor/amd_fam14h_idle.c:56 52msgid "Package in sleep state (PC1 or deeper)" 53msgstr "" 54 55#: utils/idle_monitor/amd_fam14h_idle.c:63 56msgid "Processor Package C1" 57msgstr "" 58 59#: utils/idle_monitor/amd_fam14h_idle.c:77 60msgid "North Bridge P1 boolean counter (returns 0 or 1)" 61msgstr "" 62 63#: utils/idle_monitor/mperf_monitor.c:35 64msgid "Processor Core not idle" 65msgstr "" 66 67#: utils/idle_monitor/mperf_monitor.c:42 68msgid "Processor Core in an idle state" 69msgstr "" 70 71#: utils/idle_monitor/mperf_monitor.c:50 72msgid "Average Frequency (including boost) in MHz" 73msgstr "" 74 75#: utils/idle_monitor/cpupower-monitor.c:66 76#, c-format 77msgid "" 78"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " 79"interval_sec | -c command ...]\n" 80msgstr "" 81 82#: utils/idle_monitor/cpupower-monitor.c:69 83#, c-format 84msgid "" 85"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " 86"interval_sec | -c command ...]\n" 87msgstr "" 88 89#: utils/idle_monitor/cpupower-monitor.c:71 90#, c-format 91msgid "\t -v: be more verbose\n" 92msgstr "" 93 94#: utils/idle_monitor/cpupower-monitor.c:73 95#, c-format 96msgid "\t -h: print this help\n" 97msgstr "" 98 99#: utils/idle_monitor/cpupower-monitor.c:74 100#, c-format 101msgid "\t -i: time intervall to measure for in seconds (default 1)\n" 102msgstr "" 103 104#: utils/idle_monitor/cpupower-monitor.c:75 105#, c-format 106msgid "\t -t: show CPU topology/hierarchy\n" 107msgstr "" 108 109#: utils/idle_monitor/cpupower-monitor.c:76 110#, c-format 111msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" 112msgstr "" 113 114#: utils/idle_monitor/cpupower-monitor.c:77 115#, c-format 116msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" 117msgstr "" 118 119#: utils/idle_monitor/cpupower-monitor.c:79 120#, c-format 121msgid "" 122"only one of: -t, -l, -m are allowed\n" 123"If none of them is passed," 124msgstr "" 125 126#: utils/idle_monitor/cpupower-monitor.c:80 127#, c-format 128msgid " all supported monitors are shown\n" 129msgstr "" 130 131#: utils/idle_monitor/cpupower-monitor.c:197 132#, c-format 133msgid "Monitor %s, Counter %s has no count function. Implementation error\n" 134msgstr "" 135 136#: utils/idle_monitor/cpupower-monitor.c:207 137#, c-format 138msgid " *is offline\n" 139msgstr "" 140 141#: utils/idle_monitor/cpupower-monitor.c:236 142#, c-format 143msgid "%s: max monitor name length (%d) exceeded\n" 144msgstr "" 145 146#: utils/idle_monitor/cpupower-monitor.c:250 147#, c-format 148msgid "No matching monitor found in %s, try -l option\n" 149msgstr "" 150 151#: utils/idle_monitor/cpupower-monitor.c:266 152#, c-format 153msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" 154msgstr "" 155 156#: utils/idle_monitor/cpupower-monitor.c:319 157#, c-format 158msgid "%s took %.5f seconds and exited with status %d\n" 159msgstr "" 160 161#: utils/idle_monitor/cpupower-monitor.c:406 162#, c-format 163msgid "Cannot read number of available processors\n" 164msgstr "" 165 166#: utils/idle_monitor/cpupower-monitor.c:417 167#, c-format 168msgid "Available monitor %s needs root access\n" 169msgstr "" 170 171#: utils/idle_monitor/cpupower-monitor.c:428 172#, c-format 173msgid "No HW Cstate monitors found\n" 174msgstr "" 175 176#: utils/cpupower.c:78 177#, c-format 178msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" 179msgstr "" 180 181#: utils/cpupower.c:79 182#, c-format 183msgid "cpupower --version\n" 184msgstr "" 185 186#: utils/cpupower.c:80 187#, c-format 188msgid "Supported subcommands are:\n" 189msgstr "" 190 191#: utils/cpupower.c:83 192#, c-format 193msgid "" 194"\n" 195"Some subcommands can make use of the -c cpulist option.\n" 196msgstr "" 197 198#: utils/cpupower.c:84 199#, c-format 200msgid "Look at the general cpupower manpage how to use it\n" 201msgstr "" 202 203#: utils/cpupower.c:85 204#, c-format 205msgid "and read up the subcommand's manpage whether it is supported.\n" 206msgstr "" 207 208#: utils/cpupower.c:86 209#, c-format 210msgid "" 211"\n" 212"Use cpupower help subcommand for getting help for above subcommands.\n" 213msgstr "" 214 215#: utils/cpupower.c:91 216#, c-format 217msgid "Report errors and bugs to %s, please.\n" 218msgstr "" 219"Chyby v programu prosím hlaste na %s (anglicky).\n" 220"Chyby v překladu prosím hlaste na kavol@seznam.cz (česky ;-)\n" 221 222#: utils/cpupower.c:114 223#, c-format 224msgid "Error parsing cpu list\n" 225msgstr "" 226 227#: utils/cpupower.c:172 228#, c-format 229msgid "Subcommand %s needs root privileges\n" 230msgstr "" 231 232#: utils/cpufreq-info.c:31 233#, c-format 234msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" 235msgstr "Nelze zjistit počet CPU (%s: %s), předpokládá se 1.\n" 236 237#: utils/cpufreq-info.c:63 238#, c-format 239msgid "" 240" minimum CPU frequency - maximum CPU frequency - governor\n" 241msgstr "" 242" minimální frekvence CPU - maximální frekvence CPU - regulátor\n" 243 244#: utils/cpufreq-info.c:151 245#, c-format 246msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" 247msgstr "" 248 249#. P state changes via MSR are identified via cpuid 80000007 250#. on Intel and AMD, but we assume boost capable machines can do that 251#. if (cpuid_eax(0x80000000) >= 0x80000007 252#. && (cpuid_edx(0x80000007) & (1 << 7))) 253#. 254#: utils/cpufreq-info.c:161 255#, c-format 256msgid " boost state support: \n" 257msgstr "" 258 259#: utils/cpufreq-info.c:163 260#, c-format 261msgid " Supported: %s\n" 262msgstr "" 263 264#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 265msgid "yes" 266msgstr "" 267 268#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 269msgid "no" 270msgstr "" 271 272#: utils/cpufreq-info.c:164 273#, fuzzy, c-format 274msgid " Active: %s\n" 275msgstr " ovladač: %s\n" 276 277#: utils/cpufreq-info.c:177 278#, c-format 279msgid " Boost States: %d\n" 280msgstr "" 281 282#: utils/cpufreq-info.c:178 283#, c-format 284msgid " Total States: %d\n" 285msgstr "" 286 287#: utils/cpufreq-info.c:181 288#, c-format 289msgid " Pstate-Pb%d: %luMHz (boost state)\n" 290msgstr "" 291 292#: utils/cpufreq-info.c:184 293#, c-format 294msgid " Pstate-P%d: %luMHz\n" 295msgstr "" 296 297#: utils/cpufreq-info.c:211 298#, c-format 299msgid " no or unknown cpufreq driver is active on this CPU\n" 300msgstr " pro tento CPU není aktivní žádný známý ovladač cpufreq\n" 301 302#: utils/cpufreq-info.c:213 303#, c-format 304msgid " driver: %s\n" 305msgstr " ovladač: %s\n" 306 307#: utils/cpufreq-info.c:219 308#, fuzzy, c-format 309msgid " CPUs which run at the same hardware frequency: " 310msgstr " CPU, které musí měnit frekvenci zároveň: " 311 312#: utils/cpufreq-info.c:230 313#, fuzzy, c-format 314msgid " CPUs which need to have their frequency coordinated by software: " 315msgstr " CPU, které musí měnit frekvenci zároveň: " 316 317#: utils/cpufreq-info.c:241 318#, c-format 319msgid " maximum transition latency: " 320msgstr "" 321 322#: utils/cpufreq-info.c:247 323#, c-format 324msgid " hardware limits: " 325msgstr " hardwarové meze: " 326 327#: utils/cpufreq-info.c:256 328#, c-format 329msgid " available frequency steps: " 330msgstr " dostupné frekvence: " 331 332#: utils/cpufreq-info.c:269 333#, c-format 334msgid " available cpufreq governors: " 335msgstr " dostupné regulátory: " 336 337#: utils/cpufreq-info.c:280 338#, c-format 339msgid " current policy: frequency should be within " 340msgstr " současná taktika: frekvence by měla být mezi " 341 342#: utils/cpufreq-info.c:282 343#, c-format 344msgid " and " 345msgstr " a " 346 347#: utils/cpufreq-info.c:286 348#, c-format 349msgid "" 350"The governor \"%s\" may decide which speed to use\n" 351" within this range.\n" 352msgstr "" 353" Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n" 354" v těchto mezích.\n" 355 356#: utils/cpufreq-info.c:293 357#, c-format 358msgid " current CPU frequency is " 359msgstr " současná frekvence CPU je " 360 361#: utils/cpufreq-info.c:296 362#, c-format 363msgid " (asserted by call to hardware)" 364msgstr " (zjištěno hardwarovým voláním)" 365 366#: utils/cpufreq-info.c:304 367#, c-format 368msgid " cpufreq stats: " 369msgstr " statistika cpufreq: " 370 371#: utils/cpufreq-info.c:472 372#, fuzzy, c-format 373msgid "Usage: cpupower freqinfo [options]\n" 374msgstr "Užití: cpufreq-info [přepínače]\n" 375 376#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 377#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 378#, c-format 379msgid "Options:\n" 380msgstr "Přepínače:\n" 381 382#: utils/cpufreq-info.c:474 383#, fuzzy, c-format 384msgid " -e, --debug Prints out debug information [default]\n" 385msgstr " -e, --debug Vypíše ladicí informace\n" 386 387#: utils/cpufreq-info.c:475 388#, c-format 389msgid "" 390" -f, --freq Get frequency the CPU currently runs at, according\n" 391" to the cpufreq core *\n" 392msgstr "" 393" -f, --freq Zjistí aktuální frekvenci, na které CPU běží\n" 394" podle cpufreq *\n" 395 396#: utils/cpufreq-info.c:477 397#, c-format 398msgid "" 399" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" 400" it from hardware (only available to root) *\n" 401msgstr "" 402" -w, --hwfreq Zjistí aktuální frekvenci, na které CPU běží\n" 403" z hardware (dostupné jen uživateli root) *\n" 404 405#: utils/cpufreq-info.c:479 406#, c-format 407msgid "" 408" -l, --hwlimits Determine the minimum and maximum CPU frequency " 409"allowed *\n" 410msgstr "" 411" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " 412"*\n" 413 414#: utils/cpufreq-info.c:480 415#, c-format 416msgid " -d, --driver Determines the used cpufreq kernel driver *\n" 417msgstr " -d, --driver Zjistí aktivní ovladač cpufreq *\n" 418 419#: utils/cpufreq-info.c:481 420#, c-format 421msgid " -p, --policy Gets the currently used cpufreq policy *\n" 422msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" 423 424#: utils/cpufreq-info.c:482 425#, c-format 426msgid " -g, --governors Determines available cpufreq governors *\n" 427msgstr " -g, --governors Zjistí dostupné regulátory cpufreq *\n" 428 429#: utils/cpufreq-info.c:483 430#, fuzzy, c-format 431msgid "" 432" -r, --related-cpus Determines which CPUs run at the same hardware " 433"frequency *\n" 434msgstr "" 435" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" 436 437#: utils/cpufreq-info.c:484 438#, fuzzy, c-format 439msgid "" 440" -a, --affected-cpus Determines which CPUs need to have their frequency\n" 441" coordinated by software *\n" 442msgstr "" 443" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" 444 445#: utils/cpufreq-info.c:486 446#, c-format 447msgid " -s, --stats Shows cpufreq statistics if available\n" 448msgstr " -s, --stats Zobrazí statistiku cpufreq, je-li dostupná\n" 449 450#: utils/cpufreq-info.c:487 451#, fuzzy, c-format 452msgid "" 453" -y, --latency Determines the maximum latency on CPU frequency " 454"changes *\n" 455msgstr "" 456" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " 457"*\n" 458 459#: utils/cpufreq-info.c:488 460#, c-format 461msgid " -b, --boost Checks for turbo or boost modes *\n" 462msgstr "" 463 464#: utils/cpufreq-info.c:489 465#, c-format 466msgid "" 467" -o, --proc Prints out information like provided by the /proc/" 468"cpufreq\n" 469" interface in 2.4. and early 2.6. kernels\n" 470msgstr "" 471" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" 472" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" 473 474#: utils/cpufreq-info.c:491 475#, fuzzy, c-format 476msgid "" 477" -m, --human human-readable output for the -f, -w, -s and -y " 478"parameters\n" 479msgstr "" 480" -m, --human Výstup parametrů -f, -w a -s v „lidmi čitelném“ " 481"formátu\n" 482 483#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 484#, c-format 485msgid " -h, --help Prints out this screen\n" 486msgstr " -h, --help Vypíše tuto nápovědu\n" 487 488#: utils/cpufreq-info.c:495 489#, c-format 490msgid "" 491"If no argument or only the -c, --cpu parameter is given, debug output about\n" 492"cpufreq is printed which is useful e.g. for reporting bugs.\n" 493msgstr "" 494"Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, " 495"jsou\n" 496"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n" 497 498#: utils/cpufreq-info.c:497 499#, c-format 500msgid "" 501"For the arguments marked with *, omitting the -c or --cpu argument is\n" 502"equivalent to setting it to zero\n" 503msgstr "" 504"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" 505"předpokládá se jeho hodnota 0.\n" 506 507#: utils/cpufreq-info.c:580 508#, c-format 509msgid "" 510"The argument passed to this tool can't be combined with passing a --cpu " 511"argument\n" 512msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n" 513 514#: utils/cpufreq-info.c:596 515#, c-format 516msgid "" 517"You can't specify more than one --cpu parameter and/or\n" 518"more than one output-specific argument\n" 519msgstr "" 520"Nelze zadat více než jeden parametr -c nebo --cpu\n" 521"anebo více než jeden parametr určující výstup\n" 522 523#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 524#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 525#, c-format 526msgid "invalid or unknown argument\n" 527msgstr "neplatný nebo neznámý parametr\n" 528 529#: utils/cpufreq-info.c:617 530#, c-format 531msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" 532msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n" 533 534#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 535#, c-format 536msgid "analyzing CPU %d:\n" 537msgstr "analyzuji CPU %d:\n" 538 539#: utils/cpufreq-set.c:25 540#, fuzzy, c-format 541msgid "Usage: cpupower frequency-set [options]\n" 542msgstr "Užití: cpufreq-set [přepínače]\n" 543 544#: utils/cpufreq-set.c:27 545#, c-format 546msgid "" 547" -d FREQ, --min FREQ new minimum CPU frequency the governor may " 548"select\n" 549msgstr "" 550" -d FREQ, --min FREQ Nová nejnižší frekvence, kterou může regulátor " 551"vybrat\n" 552 553#: utils/cpufreq-set.c:28 554#, c-format 555msgid "" 556" -u FREQ, --max FREQ new maximum CPU frequency the governor may " 557"select\n" 558msgstr "" 559" -u FREQ, --max FREQ Nová nejvyšší frekvence, kterou může regulátor " 560"zvolit\n" 561 562#: utils/cpufreq-set.c:29 563#, c-format 564msgid " -g GOV, --governor GOV new cpufreq governor\n" 565msgstr " -g GOV, --governors GOV Nový regulátor cpufreq\n" 566 567#: utils/cpufreq-set.c:30 568#, c-format 569msgid "" 570" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" 571" governor to be available and loaded\n" 572msgstr "" 573" -f FREQ, --freq FREQ Frekvence, která má být nastavena. Vyžaduje, aby " 574"byl\n" 575" v jádře nahrán regulátor ‚userspace‘.\n" 576 577#: utils/cpufreq-set.c:32 578#, c-format 579msgid " -r, --related Switches all hardware-related CPUs\n" 580msgstr "" 581 582#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 583#, fuzzy, c-format 584msgid " -h, --help Prints out this screen\n" 585msgstr " -h, --help Vypíše tuto nápovědu\n" 586 587#: utils/cpufreq-set.c:35 588#, fuzzy, c-format 589msgid "" 590"Notes:\n" 591"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" 592msgstr "" 593"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" 594"předpokládá se jeho hodnota 0.\n" 595 596#: utils/cpufreq-set.c:37 597#, fuzzy, c-format 598msgid "" 599"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " 600"parameter\n" 601" except the -c CPU, --cpu CPU parameter\n" 602"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" 603" by postfixing the value with the wanted unit name, without any space\n" 604" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" 605msgstr "" 606"Poznámky:\n" 607"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n" 608"2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -" 609"c\n" 610" nebo --cpu\n" 611"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n" 612" připojením názvu jednotky bez mezery mezi číslem a jednotkou\n" 613" (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n" 614 615#: utils/cpufreq-set.c:57 616#, c-format 617msgid "" 618"Error setting new values. Common errors:\n" 619"- Do you have proper administration rights? (super-user?)\n" 620"- Is the governor you requested available and modprobed?\n" 621"- Trying to set an invalid policy?\n" 622"- Trying to set a specific frequency, but userspace governor is not " 623"available,\n" 624" for example because of hardware which cannot be set to a specific " 625"frequency\n" 626" or because the userspace governor isn't loaded?\n" 627msgstr "" 628"Chyba při nastavování nových hodnot. Obvyklé problémy:\n" 629"- Máte patřičná administrátorská práva? (root?)\n" 630"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n" 631"- Snažíte se nastavit neplatnou taktiku?\n" 632"- Snažíte se nastavit určitou frekvenci, ale není dostupný\n" 633" regulátor ‚userspace‘, například protože není nahrán v jádře,\n" 634" nebo nelze na tomto hardware nastavit určitou frekvenci?\n" 635 636#: utils/cpufreq-set.c:170 637#, c-format 638msgid "wrong, unknown or unhandled CPU?\n" 639msgstr "neznámý nebo nepodporovaný CPU?\n" 640 641#: utils/cpufreq-set.c:302 642#, c-format 643msgid "" 644"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" 645"-g/--governor parameters\n" 646msgstr "" 647"přepínač -f/--freq nemůže být použit zároveň\n" 648"s přepínačem -d/--min, -u/--max nebo -g/--governor\n" 649 650#: utils/cpufreq-set.c:308 651#, c-format 652msgid "" 653"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" 654"-g/--governor must be passed\n" 655msgstr "" 656"Musí být zadán alespoň jeden přepínač\n" 657"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n" 658 659#: utils/cpufreq-set.c:347 660#, c-format 661msgid "Setting cpu: %d\n" 662msgstr "" 663 664#: utils/cpupower-set.c:22 665#, c-format 666msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" 667msgstr "" 668 669#: utils/cpupower-set.c:24 670#, c-format 671msgid "" 672" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" 673" Intel models [0-15], see manpage for details\n" 674msgstr "" 675 676#: utils/cpupower-set.c:26 677#, c-format 678msgid "" 679" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" 680msgstr "" 681 682#: utils/cpupower-set.c:27 683#, c-format 684msgid "" 685" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " 686"policy.\n" 687msgstr "" 688 689#: utils/cpupower-set.c:80 690#, c-format 691msgid "--perf-bias param out of range [0-%d]\n" 692msgstr "" 693 694#: utils/cpupower-set.c:91 695#, c-format 696msgid "--sched-mc param out of range [0-%d]\n" 697msgstr "" 698 699#: utils/cpupower-set.c:102 700#, c-format 701msgid "--sched-smt param out of range [0-%d]\n" 702msgstr "" 703 704#: utils/cpupower-set.c:121 705#, c-format 706msgid "Error setting sched-mc %s\n" 707msgstr "" 708 709#: utils/cpupower-set.c:127 710#, c-format 711msgid "Error setting sched-smt %s\n" 712msgstr "" 713 714#: utils/cpupower-set.c:146 715#, c-format 716msgid "Error setting perf-bias value on CPU %d\n" 717msgstr "" 718 719#: utils/cpupower-info.c:21 720#, c-format 721msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" 722msgstr "" 723 724#: utils/cpupower-info.c:23 725#, c-format 726msgid "" 727" -b, --perf-bias Gets CPU's power vs performance policy on some\n" 728" Intel models [0-15], see manpage for details\n" 729msgstr "" 730 731#: utils/cpupower-info.c:25 732#, fuzzy, c-format 733msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" 734msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" 735 736#: utils/cpupower-info.c:26 737#, c-format 738msgid "" 739" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" 740msgstr "" 741 742#: utils/cpupower-info.c:28 743#, c-format 744msgid "" 745"\n" 746"Passing no option will show all info, by default only on core 0\n" 747msgstr "" 748 749#: utils/cpupower-info.c:102 750#, c-format 751msgid "System's multi core scheduler setting: " 752msgstr "" 753 754#. if sysfs file is missing it's: errno == ENOENT 755#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 756#, c-format 757msgid "not supported\n" 758msgstr "" 759 760#: utils/cpupower-info.c:111 761#, c-format 762msgid "System's thread sibling scheduler setting: " 763msgstr "" 764 765#: utils/cpupower-info.c:126 766#, c-format 767msgid "Intel's performance bias setting needs root privileges\n" 768msgstr "" 769 770#: utils/cpupower-info.c:128 771#, c-format 772msgid "System does not support Intel's performance bias setting\n" 773msgstr "" 774 775#: utils/cpupower-info.c:147 776#, c-format 777msgid "Could not read perf-bias value\n" 778msgstr "" 779 780#: utils/cpupower-info.c:150 781#, c-format 782msgid "perf-bias: %d\n" 783msgstr "" 784 785#: utils/cpuidle-info.c:28 786#, fuzzy, c-format 787msgid "Analyzing CPU %d:\n" 788msgstr "analyzuji CPU %d:\n" 789 790#: utils/cpuidle-info.c:32 791#, c-format 792msgid "CPU %u: No idle states\n" 793msgstr "" 794 795#: utils/cpuidle-info.c:36 796#, c-format 797msgid "CPU %u: Can't read idle state info\n" 798msgstr "" 799 800#: utils/cpuidle-info.c:41 801#, c-format 802msgid "Could not determine max idle state %u\n" 803msgstr "" 804 805#: utils/cpuidle-info.c:46 806#, c-format 807msgid "Number of idle states: %d\n" 808msgstr "" 809 810#: utils/cpuidle-info.c:48 811#, fuzzy, c-format 812msgid "Available idle states:" 813msgstr " dostupné frekvence: " 814 815#: utils/cpuidle-info.c:71 816#, c-format 817msgid "Flags/Description: %s\n" 818msgstr "" 819 820#: utils/cpuidle-info.c:74 821#, c-format 822msgid "Latency: %lu\n" 823msgstr "" 824 825#: utils/cpuidle-info.c:76 826#, c-format 827msgid "Usage: %lu\n" 828msgstr "" 829 830#: utils/cpuidle-info.c:78 831#, c-format 832msgid "Duration: %llu\n" 833msgstr "" 834 835#: utils/cpuidle-info.c:90 836#, c-format 837msgid "Could not determine cpuidle driver\n" 838msgstr "" 839 840#: utils/cpuidle-info.c:94 841#, fuzzy, c-format 842msgid "CPUidle driver: %s\n" 843msgstr " ovladač: %s\n" 844 845#: utils/cpuidle-info.c:99 846#, c-format 847msgid "Could not determine cpuidle governor\n" 848msgstr "" 849 850#: utils/cpuidle-info.c:103 851#, c-format 852msgid "CPUidle governor: %s\n" 853msgstr "" 854 855#: utils/cpuidle-info.c:122 856#, c-format 857msgid "CPU %u: Can't read C-state info\n" 858msgstr "" 859 860#. printf("Cstates: %d\n", cstates); 861#: utils/cpuidle-info.c:127 862#, c-format 863msgid "active state: C0\n" 864msgstr "" 865 866#: utils/cpuidle-info.c:128 867#, c-format 868msgid "max_cstate: C%u\n" 869msgstr "" 870 871#: utils/cpuidle-info.c:129 872#, c-format 873msgid "maximum allowed latency: %lu usec\n" 874msgstr "" 875 876#: utils/cpuidle-info.c:130 877#, c-format 878msgid "states:\t\n" 879msgstr "" 880 881#: utils/cpuidle-info.c:132 882#, c-format 883msgid " C%d: type[C%d] " 884msgstr "" 885 886#: utils/cpuidle-info.c:134 887#, c-format 888msgid "promotion[--] demotion[--] " 889msgstr "" 890 891#: utils/cpuidle-info.c:135 892#, c-format 893msgid "latency[%03lu] " 894msgstr "" 895 896#: utils/cpuidle-info.c:137 897#, c-format 898msgid "usage[%08lu] " 899msgstr "" 900 901#: utils/cpuidle-info.c:139 902#, c-format 903msgid "duration[%020Lu] \n" 904msgstr "" 905 906#: utils/cpuidle-info.c:147 907#, fuzzy, c-format 908msgid "Usage: cpupower idleinfo [options]\n" 909msgstr "Užití: cpufreq-info [přepínače]\n" 910 911#: utils/cpuidle-info.c:149 912#, fuzzy, c-format 913msgid " -s, --silent Only show general C-state information\n" 914msgstr " -e, --debug Vypíše ladicí informace\n" 915 916#: utils/cpuidle-info.c:150 917#, fuzzy, c-format 918msgid "" 919" -o, --proc Prints out information like provided by the /proc/" 920"acpi/processor/*/power\n" 921" interface in older kernels\n" 922msgstr "" 923" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" 924" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" 925 926#: utils/cpuidle-info.c:209 927#, fuzzy, c-format 928msgid "You can't specify more than one output-specific argument\n" 929msgstr "" 930"Nelze zadat více než jeden parametr -c nebo --cpu\n" 931"anebo více než jeden parametr určující výstup\n" 932 933#~ msgid "" 934#~ " -c CPU, --cpu CPU CPU number which information shall be determined " 935#~ "about\n" 936#~ msgstr "" 937#~ " -c CPU, --cpu CPU Číslo CPU, o kterém se mají zjistit informace\n" 938 939#~ msgid "" 940#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " 941#~ "modified\n" 942#~ msgstr "" 943#~ " -c CPU, --cpu CPU Číslo CPU pro který se má provést nastavení " 944#~ "cpufreq\n" 945