1[ 2 { 3 "BriefDescription": "Percentage of cycles that are run cycles", 4 "MetricExpr": "PM_RUN_CYC / PM_CYC * 100", 5 "MetricGroup": "General", 6 "MetricName": "RUN_CYCLES_RATE", 7 "ScaleUnit": "1%" 8 }, 9 { 10 "BriefDescription": "Average cycles per completed instruction", 11 "MetricExpr": "PM_CYC / PM_INST_CMPL", 12 "MetricGroup": "CPI", 13 "MetricName": "CYCLES_PER_INSTRUCTION" 14 }, 15 { 16 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled for any reason", 17 "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL", 18 "MetricGroup": "CPI;CPI_STALL_RATIO", 19 "MetricName": "DISPATCHED_CPI" 20 }, 21 { 22 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because there was a flush", 23 "MetricExpr": "PM_DISP_STALL_FLUSH / PM_RUN_INST_CMPL", 24 "MetricGroup": "CPI", 25 "MetricName": "DISPATCHED_FLUSH_CPI" 26 }, 27 { 28 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because the MMU was handling a translation miss", 29 "MetricExpr": "PM_DISP_STALL_TRANSLATION / PM_RUN_INST_CMPL", 30 "MetricGroup": "CPI", 31 "MetricName": "DISPATCHED_TRANSLATION_CPI" 32 }, 33 { 34 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled waiting to resolve an instruction ERAT miss", 35 "MetricExpr": "PM_DISP_STALL_IERAT_ONLY_MISS / PM_RUN_INST_CMPL", 36 "MetricGroup": "CPI", 37 "MetricName": "DISPATCHED_IERAT_ONLY_MISS_CPI" 38 }, 39 { 40 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled waiting to resolve an instruction TLB miss", 41 "MetricExpr": "PM_DISP_STALL_ITLB_MISS / PM_RUN_INST_CMPL", 42 "MetricGroup": "CPI", 43 "MetricName": "DISPATCHED_ITLB_MISS_CPI" 44 }, 45 { 46 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to an icache miss", 47 "MetricExpr": "PM_DISP_STALL_IC_MISS / PM_RUN_INST_CMPL", 48 "MetricGroup": "CPI", 49 "MetricName": "DISPATCHED_IC_MISS_CPI" 50 }, 51 { 52 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from the local L2", 53 "MetricExpr": "PM_DISP_STALL_IC_L2 / PM_RUN_INST_CMPL", 54 "MetricGroup": "CPI", 55 "MetricName": "DISPATCHED_IC_L2_CPI" 56 }, 57 { 58 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from the local L3", 59 "MetricExpr": "PM_DISP_STALL_IC_L3 / PM_RUN_INST_CMPL", 60 "MetricGroup": "CPI", 61 "MetricName": "DISPATCHED_IC_L3_CPI" 62 }, 63 { 64 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while the instruction was fetched from any source beyond the local L3", 65 "MetricExpr": "PM_DISP_STALL_IC_L3MISS / PM_RUN_INST_CMPL", 66 "MetricGroup": "CPI", 67 "MetricName": "DISPATCHED_IC_L3MISS_CPI" 68 }, 69 { 70 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to an icache miss after a branch mispredict", 71 "MetricExpr": "PM_DISP_STALL_BR_MPRED_ICMISS / PM_RUN_INST_CMPL", 72 "MetricGroup": "CPI", 73 "MetricName": "DISPATCHED_BR_MPRED_ICMISS_CPI" 74 }, 75 { 76 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from the local L2 after suffering a branch mispredict", 77 "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L2 / PM_RUN_INST_CMPL", 78 "MetricGroup": "CPI", 79 "MetricName": "DISPATCHED_BR_MPRED_IC_L2_CPI" 80 }, 81 { 82 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from the local L3 after suffering a branch mispredict", 83 "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3 / PM_RUN_INST_CMPL", 84 "MetricGroup": "CPI", 85 "MetricName": "DISPATCHED_BR_MPRED_IC_L3_CPI" 86 }, 87 { 88 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled while instruction was fetched from any source beyond the local L3 after suffering a branch mispredict", 89 "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3MISS / PM_RUN_INST_CMPL", 90 "MetricGroup": "CPI", 91 "MetricName": "DISPATCHED_BR_MPRED_IC_L3MISS_CPI" 92 }, 93 { 94 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled due to a branch mispredict", 95 "MetricExpr": "PM_DISP_STALL_BR_MPRED / PM_RUN_INST_CMPL", 96 "MetricGroup": "CPI", 97 "MetricName": "DISPATCHED_BR_MPRED_CPI" 98 }, 99 { 100 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch for any reason", 101 "MetricExpr": "PM_DISP_STALL_HELD_CYC / PM_RUN_INST_CMPL", 102 "MetricGroup": "CPI", 103 "MetricName": "DISPATCHED_HELD_CPI" 104 }, 105 { 106 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because of a synchronizing instruction that requires the ICT to be empty before dispatch", 107 "MetricExpr": "PM_DISP_STALL_HELD_SYNC_CYC / PM_RUN_INST_CMPL", 108 "MetricGroup": "CPI", 109 "MetricName": "DISP_HELD_STALL_SYNC_CPI" 110 }, 111 { 112 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch while waiting on the scoreboard", 113 "MetricExpr": "PM_DISP_STALL_HELD_SCOREBOARD_CYC / PM_RUN_INST_CMPL", 114 "MetricGroup": "CPI", 115 "MetricName": "DISP_HELD_STALL_SCOREBOARD_CPI" 116 }, 117 { 118 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch due to issue queue full", 119 "MetricExpr": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC / PM_RUN_INST_CMPL", 120 "MetricGroup": "CPI", 121 "MetricName": "DISP_HELD_STALL_ISSQ_FULL_CPI" 122 }, 123 { 124 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the mapper/SRB was full", 125 "MetricExpr": "PM_DISP_STALL_HELD_RENAME_CYC / PM_RUN_INST_CMPL", 126 "MetricGroup": "CPI", 127 "MetricName": "DISPATCHED_HELD_RENAME_CPI" 128 }, 129 { 130 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the STF mapper/SRB was full", 131 "MetricExpr": "PM_DISP_STALL_HELD_STF_MAPPER_CYC / PM_RUN_INST_CMPL", 132 "MetricGroup": "CPI", 133 "MetricName": "DISPATCHED_HELD_STF_MAPPER_CPI" 134 }, 135 { 136 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because the XVFC mapper/SRB was full", 137 "MetricExpr": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC / PM_RUN_INST_CMPL", 138 "MetricGroup": "CPI", 139 "MetricName": "DISPATCHED_HELD_XVFC_MAPPER_CPI" 140 }, 141 { 142 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch for any other reason", 143 "MetricExpr": "PM_DISP_STALL_HELD_OTHER_CYC / PM_RUN_INST_CMPL", 144 "MetricGroup": "CPI", 145 "MetricName": "DISPATCHED_HELD_OTHER_CPI" 146 }, 147 { 148 "BriefDescription": "Average cycles per completed instruction when the NTC instruction has been dispatched but not issued for any reason", 149 "MetricExpr": "PM_ISSUE_STALL / PM_RUN_INST_CMPL", 150 "MetricGroup": "CPI;CPI_STALL_RATIO", 151 "MetricName": "ISSUE_STALL_CPI" 152 }, 153 { 154 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting to be finished in one of the execution units", 155 "MetricExpr": "PM_EXEC_STALL / PM_RUN_INST_CMPL", 156 "MetricGroup": "CPI;CPI_STALL_RATIO", 157 "MetricName": "EXECUTION_STALL_CPI" 158 }, 159 { 160 "BriefDescription": "Average cycles per completed instruction spent executing an NTC instruction that gets flushed some time after dispatch", 161 "MetricExpr": "PM_EXEC_STALL_NTC_FLUSH / PM_RUN_INST_CMPL", 162 "MetricGroup": "CPI", 163 "MetricName": "NTC_FLUSH_STALL_CPI" 164 }, 165 { 166 "BriefDescription": "Average cycles per completed instruction when the NTF instruction finishes at dispatch", 167 "MetricExpr": "PM_EXEC_STALL_FIN_AT_DISP / PM_RUN_INST_CMPL", 168 "MetricGroup": "CPI", 169 "MetricName": "FIN_AT_DISP_STALL_CPI" 170 }, 171 { 172 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the branch unit", 173 "MetricExpr": "PM_EXEC_STALL_BRU / PM_RUN_INST_CMPL", 174 "MetricGroup": "CPI", 175 "MetricName": "BRU_STALL_CPI" 176 }, 177 { 178 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a simple fixed point instruction that is executing in the LSU", 179 "MetricExpr": "PM_EXEC_STALL_SIMPLE_FX / PM_RUN_INST_CMPL", 180 "MetricGroup": "CPI", 181 "MetricName": "SIMPLE_FX_STALL_CPI" 182 }, 183 { 184 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the VSU", 185 "MetricExpr": "PM_EXEC_STALL_VSU / PM_RUN_INST_CMPL", 186 "MetricGroup": "CPI", 187 "MetricName": "VSU_STALL_CPI" 188 }, 189 { 190 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting to be finished in one of the execution units", 191 "MetricExpr": "PM_EXEC_STALL_TRANSLATION / PM_RUN_INST_CMPL", 192 "MetricGroup": "CPI", 193 "MetricName": "TRANSLATION_STALL_CPI" 194 }, 195 { 196 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a load or store that suffered a translation miss", 197 "MetricExpr": "PM_EXEC_STALL_DERAT_ONLY_MISS / PM_RUN_INST_CMPL", 198 "MetricGroup": "CPI", 199 "MetricName": "DERAT_ONLY_MISS_STALL_CPI" 200 }, 201 { 202 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is recovering from a TLB miss", 203 "MetricExpr": "PM_EXEC_STALL_DERAT_DTLB_MISS / PM_RUN_INST_CMPL", 204 "MetricGroup": "CPI", 205 "MetricName": "DERAT_DTLB_MISS_STALL_CPI" 206 }, 207 { 208 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing in the LSU", 209 "MetricExpr": "PM_EXEC_STALL_LSU / PM_RUN_INST_CMPL", 210 "MetricGroup": "CPI", 211 "MetricName": "LSU_STALL_CPI" 212 }, 213 { 214 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a load that is executing in the LSU", 215 "MetricExpr": "PM_EXEC_STALL_LOAD / PM_RUN_INST_CMPL", 216 "MetricGroup": "CPI", 217 "MetricName": "LOAD_STALL_CPI" 218 }, 219 { 220 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3", 221 "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3 / PM_RUN_INST_CMPL", 222 "MetricGroup": "CPI", 223 "MetricName": "DMISS_L2L3_STALL_CPI" 224 }, 225 { 226 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, with an RC dispatch conflict", 227 "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT / PM_RUN_INST_CMPL", 228 "MetricGroup": "CPI", 229 "MetricName": "DMISS_L2L3_CONFLICT_STALL_CPI" 230 }, 231 { 232 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from either the local L2 or local L3, without an RC dispatch conflict", 233 "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT / PM_RUN_INST_CMPL", 234 "MetricGroup": "CPI", 235 "MetricName": "DMISS_L2L3_NOCONFLICT_STALL_CPI" 236 }, 237 { 238 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a source beyond the local L2 and local L3", 239 "MetricExpr": "PM_EXEC_STALL_DMISS_L3MISS / PM_RUN_INST_CMPL", 240 "MetricGroup": "CPI", 241 "MetricName": "DMISS_L3MISS_STALL_CPI" 242 }, 243 { 244 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a neighbor chiplet's L2 or L3 in the same chip", 245 "MetricExpr": "PM_EXEC_STALL_DMISS_L21_L31 / PM_RUN_INST_CMPL", 246 "MetricGroup": "CPI", 247 "MetricName": "DMISS_L21_L31_STALL_CPI" 248 }, 249 { 250 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from L4, local memory or OpenCAPI chip", 251 "MetricExpr": "PM_EXEC_STALL_DMISS_LMEM / PM_RUN_INST_CMPL", 252 "MetricGroup": "CPI", 253 "MetricName": "DMISS_LMEM_STALL_CPI" 254 }, 255 { 256 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a remote chip (cache, L4, memory or OpenCAPI) in the same group", 257 "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_CHIP / PM_RUN_INST_CMPL", 258 "MetricGroup": "CPI", 259 "MetricName": "DMISS_OFF_CHIP_STALL_CPI" 260 }, 261 { 262 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is waiting for a load miss to resolve from a distant chip (cache, L4, memory or OpenCAPI chip)", 263 "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_NODE / PM_RUN_INST_CMPL", 264 "MetricGroup": "CPI", 265 "MetricName": "DMISS_OFF_NODE_STALL_CPI" 266 }, 267 { 268 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing a TLBIEL instruction", 269 "MetricExpr": "PM_EXEC_STALL_TLBIEL / PM_RUN_INST_CMPL", 270 "MetricGroup": "CPI", 271 "MetricName": "TLBIEL_STALL_CPI" 272 }, 273 { 274 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is finishing a load after its data has been reloaded from a data source beyond the local L1, OR when the LSU is processing an L1-hit, OR when the NTF instruction merged with another load in the LMQ", 275 "MetricExpr": "PM_EXEC_STALL_LOAD_FINISH / PM_RUN_INST_CMPL", 276 "MetricGroup": "CPI", 277 "MetricName": "LOAD_FINISH_STALL_CPI" 278 }, 279 { 280 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a store that is executing in the LSU", 281 "MetricExpr": "PM_EXEC_STALL_STORE / PM_RUN_INST_CMPL", 282 "MetricGroup": "CPI", 283 "MetricName": "STORE_STALL_CPI" 284 }, 285 { 286 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is in the store unit outside of handling store misses or other special store operations", 287 "MetricExpr": "PM_EXEC_STALL_STORE_PIPE / PM_RUN_INST_CMPL", 288 "MetricGroup": "CPI", 289 "MetricName": "STORE_PIPE_STALL_CPI" 290 }, 291 { 292 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a store whose cache line was not resident in the L1 and had to wait for allocation of the missing line into the L1", 293 "MetricExpr": "PM_EXEC_STALL_STORE_MISS / PM_RUN_INST_CMPL", 294 "MetricGroup": "CPI", 295 "MetricName": "STORE_MISS_STALL_CPI" 296 }, 297 { 298 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a TLBIE instruction waiting for a response from the L2", 299 "MetricExpr": "PM_EXEC_STALL_TLBIE / PM_RUN_INST_CMPL", 300 "MetricGroup": "CPI", 301 "MetricName": "TLBIE_STALL_CPI" 302 }, 303 { 304 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is executing a PTESYNC instruction", 305 "MetricExpr": "PM_EXEC_STALL_PTESYNC / PM_RUN_INST_CMPL", 306 "MetricGroup": "CPI", 307 "MetricName": "PTESYNC_STALL_CPI" 308 }, 309 { 310 "BriefDescription": "Average cycles per completed instruction when the NTC instruction cannot complete because the thread was blocked", 311 "MetricExpr": "PM_CMPL_STALL / PM_RUN_INST_CMPL", 312 "MetricGroup": "CPI;CPI_STALL_RATIO", 313 "MetricName": "COMPLETION_STALL_CPI" 314 }, 315 { 316 "BriefDescription": "Average cycles per completed instruction when the NTC instruction cannot complete because it was interrupted by ANY exception", 317 "MetricExpr": "PM_CMPL_STALL_EXCEPTION / PM_RUN_INST_CMPL", 318 "MetricGroup": "CPI", 319 "MetricName": "EXCEPTION_COMPLETION_STALL_CPI" 320 }, 321 { 322 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is stuck at finish waiting for the non-speculative finish of either a STCX instruction waiting for its result or a load waiting for non-critical sectors of data and ECC", 323 "MetricExpr": "PM_CMPL_STALL_MEM_ECC / PM_RUN_INST_CMPL", 324 "MetricGroup": "CPI", 325 "MetricName": "MEM_ECC_COMPLETION_STALL_CPI" 326 }, 327 { 328 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a STCX instruction waiting for resolution from the nest", 329 "MetricExpr": "PM_CMPL_STALL_STCX / PM_RUN_INST_CMPL", 330 "MetricGroup": "CPI", 331 "MetricName": "STCX_COMPLETION_STALL_CPI" 332 }, 333 { 334 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a LWSYNC instruction waiting to complete", 335 "MetricExpr": "PM_CMPL_STALL_LWSYNC / PM_RUN_INST_CMPL", 336 "MetricGroup": "CPI", 337 "MetricName": "LWSYNC_COMPLETION_STALL_CPI" 338 }, 339 { 340 "BriefDescription": "Average cycles per completed instruction when the NTC instruction is a HWSYNC instruction stuck at finish waiting for a response from the L2", 341 "MetricExpr": "PM_CMPL_STALL_HWSYNC / PM_RUN_INST_CMPL", 342 "MetricGroup": "CPI", 343 "MetricName": "HWSYNC_COMPLETION_STALL_CPI" 344 }, 345 { 346 "BriefDescription": "Average cycles per completed instruction when the NTC instruction required special handling before completion", 347 "MetricExpr": "PM_CMPL_STALL_SPECIAL / PM_RUN_INST_CMPL", 348 "MetricGroup": "CPI", 349 "MetricName": "SPECIAL_COMPLETION_STALL_CPI" 350 }, 351 { 352 "BriefDescription": "Average cycles per completed instruction when dispatch was stalled because fetch was being held, so there was nothing in the pipeline for this thread", 353 "MetricExpr": "PM_DISP_STALL_FETCH / PM_RUN_INST_CMPL", 354 "MetricGroup": "CPI", 355 "MetricName": "DISPATCHED_FETCH_CPI" 356 }, 357 { 358 "BriefDescription": "Average cycles per completed instruction when the NTC instruction was held at dispatch because of power management", 359 "MetricExpr": "PM_DISP_STALL_HELD_HALT_CYC / PM_RUN_INST_CMPL", 360 "MetricGroup": "CPI", 361 "MetricName": "DISPATCHED_HELD_HALT_CPI" 362 }, 363 { 364 "BriefDescription": "Percentage of flushes per completed instruction", 365 "MetricExpr": "PM_FLUSH / PM_RUN_INST_CMPL * 100", 366 "MetricGroup": "Others", 367 "MetricName": "FLUSH_RATE", 368 "ScaleUnit": "1%" 369 }, 370 { 371 "BriefDescription": "Percentage of flushes due to a branch mispredict per completed instruction", 372 "MetricExpr": "PM_FLUSH_MPRED / PM_RUN_INST_CMPL * 100", 373 "MetricGroup": "Others", 374 "MetricName": "BR_MPRED_FLUSH_RATE", 375 "ScaleUnit": "1%" 376 }, 377 { 378 "BriefDescription": "Percentage of branch mispredictions per completed instruction", 379 "MetricExpr": "PM_BR_MPRED_CMPL / PM_RUN_INST_CMPL", 380 "MetricGroup": "Others", 381 "MetricName": "BRANCH_MISPREDICTION_RATE" 382 }, 383 { 384 "BriefDescription": "Percentage of finished loads that missed in the L1", 385 "MetricExpr": "PM_LD_MISS_L1 / PM_LD_REF_L1 * 100", 386 "MetricGroup": "Others", 387 "MetricName": "L1_LD_MISS_RATIO", 388 "ScaleUnit": "1%" 389 }, 390 { 391 "BriefDescription": "Percentage of completed instructions that were loads that missed the L1", 392 "MetricExpr": "PM_LD_MISS_L1 / PM_RUN_INST_CMPL * 100", 393 "MetricGroup": "Others", 394 "MetricName": "L1_LD_MISS_RATE", 395 "ScaleUnit": "1%" 396 }, 397 { 398 "BriefDescription": "Percentage of completed instructions when the DPTEG required for the load/store instruction in execution was missing from the TLB", 399 "MetricExpr": "PM_DTLB_MISS / PM_RUN_INST_CMPL * 100", 400 "MetricGroup": "Others", 401 "MetricName": "DTLB_MISS_RATE", 402 "ScaleUnit": "1%" 403 }, 404 { 405 "BriefDescription": "Average number of completed instructions dispatched per instruction completed", 406 "MetricExpr": "PM_INST_DISP / PM_RUN_INST_CMPL", 407 "MetricGroup": "General", 408 "MetricName": "DISPATCH_PER_INST_CMPL" 409 }, 410 { 411 "BriefDescription": "Percentage of completed instructions that were a demand load that did not hit in the L1 or L2", 412 "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100", 413 "MetricGroup": "General", 414 "MetricName": "L2_LD_MISS_RATE", 415 "ScaleUnit": "1%" 416 }, 417 { 418 "BriefDescription": "Percentage of completed instructions that were demand fetches that missed the L1 icache", 419 "MetricExpr": "PM_L1_ICACHE_MISS / PM_RUN_INST_CMPL * 100", 420 "MetricGroup": "Instruction_Misses", 421 "MetricName": "L1_INST_MISS_RATE", 422 "ScaleUnit": "1%" 423 }, 424 { 425 "BriefDescription": "Percentage of completed instructions that were demand fetches that reloaded from beyond the L3 icache", 426 "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100", 427 "MetricGroup": "General", 428 "MetricName": "L3_INST_MISS_RATE", 429 "ScaleUnit": "1%" 430 }, 431 { 432 "BriefDescription": "Average number of completed instructions per cycle", 433 "MetricExpr": "PM_INST_CMPL / PM_CYC", 434 "MetricGroup": "General", 435 "MetricName": "IPC" 436 }, 437 { 438 "BriefDescription": "Average number of cycles per completed instruction group", 439 "MetricExpr": "PM_CYC / PM_1PLUS_PPC_CMPL", 440 "MetricGroup": "General", 441 "MetricName": "CYCLES_PER_COMPLETED_INSTRUCTIONS_SET" 442 }, 443 { 444 "BriefDescription": "Percentage of cycles when at least 1 instruction dispatched", 445 "MetricExpr": "PM_1PLUS_PPC_DISP / PM_RUN_CYC * 100", 446 "MetricGroup": "General", 447 "MetricName": "CYCLES_ATLEAST_ONE_INST_DISPATCHED", 448 "ScaleUnit": "1%" 449 }, 450 { 451 "BriefDescription": "Average number of finished loads per completed instruction", 452 "MetricExpr": "PM_LD_REF_L1 / PM_RUN_INST_CMPL", 453 "MetricGroup": "General", 454 "MetricName": "LOADS_PER_INST" 455 }, 456 { 457 "BriefDescription": "Percentage of demand loads that reloaded from beyond the L2 per completed instruction", 458 "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100", 459 "MetricGroup": "dL1_Reloads", 460 "MetricName": "DL1_RELOAD_FROM_L2_MISS_RATE", 461 "ScaleUnit": "1%" 462 }, 463 { 464 "BriefDescription": "Percentage of demand loads that reloaded from beyond the L3 per completed instruction", 465 "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100", 466 "MetricGroup": "dL1_Reloads", 467 "MetricName": "DL1_RELOAD_FROM_L3_MISS_RATE", 468 "ScaleUnit": "1%" 469 }, 470 { 471 "BriefDescription": "Percentage of DERAT misses with 4k page size per completed instruction", 472 "MetricExpr": "PM_DERAT_MISS_4K / PM_RUN_INST_CMPL * 100", 473 "MetricGroup": "Translation", 474 "MetricName": "DERAT_4K_MISS_RATE", 475 "ScaleUnit": "1%" 476 }, 477 { 478 "BriefDescription": "Percentage of DERAT misses with 64k page size per completed instruction", 479 "MetricExpr": "PM_DERAT_MISS_64K / PM_RUN_INST_CMPL * 100", 480 "MetricGroup": "Translation", 481 "MetricName": "DERAT_64K_MISS_RATE", 482 "ScaleUnit": "1%" 483 }, 484 { 485 "BriefDescription": "Average number of run cycles per completed instruction", 486 "MetricExpr": "PM_RUN_CYC / PM_RUN_INST_CMPL", 487 "MetricGroup": "General", 488 "MetricName": "RUN_CPI" 489 }, 490 { 491 "BriefDescription": "Percentage of DERAT misses per completed instruction", 492 "MetricExpr": "PM_DERAT_MISS / PM_RUN_INST_CMPL * 100", 493 "MetricGroup": "Translation", 494 "MetricName": "DERAT_MISS_RATE", 495 "ScaleUnit": "1%" 496 }, 497 { 498 "BriefDescription": "Average number of completed instructions per run cycle", 499 "MetricExpr": "PM_RUN_INST_CMPL / PM_RUN_CYC", 500 "MetricGroup": "General", 501 "MetricName": "RUN_IPC" 502 }, 503 { 504 "BriefDescription": "Average number of completed instructions per instruction group", 505 "MetricExpr": "PM_RUN_INST_CMPL / PM_1PLUS_PPC_CMPL", 506 "MetricGroup": "General", 507 "MetricName": "AVERAGE_COMPLETED_INSTRUCTION_SET_SIZE" 508 }, 509 { 510 "BriefDescription": "Average number of finished instructions per completed instructions", 511 "MetricExpr": "PM_INST_FIN / PM_RUN_INST_CMPL", 512 "MetricGroup": "General", 513 "MetricName": "INST_FIN_PER_CMPL" 514 }, 515 { 516 "BriefDescription": "Average cycles per completed instruction when the NTF instruction is completing and the finish was overlooked", 517 "MetricExpr": "PM_EXEC_STALL_UNKNOWN / PM_RUN_INST_CMPL", 518 "MetricGroup": "General", 519 "MetricName": "EXEC_STALL_UNKOWN_CPI" 520 }, 521 { 522 "BriefDescription": "Percentage of finished branches that were taken", 523 "MetricExpr": "PM_BR_TAKEN_CMPL / PM_BR_FIN * 100", 524 "MetricGroup": "General", 525 "MetricName": "TAKEN_BRANCHES", 526 "ScaleUnit": "1%" 527 }, 528 { 529 "BriefDescription": "Percentage of completed instructions that were a demand load that did not hit in the L1, L2, or the L3", 530 "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100", 531 "MetricGroup": "General", 532 "MetricName": "L3_LD_MISS_RATE", 533 "ScaleUnit": "1%" 534 }, 535 { 536 "BriefDescription": "Average number of finished branches per completed instruction", 537 "MetricExpr": "PM_BR_FIN / PM_RUN_INST_CMPL", 538 "MetricGroup": "General", 539 "MetricName": "BRANCHES_PER_INST" 540 }, 541 { 542 "BriefDescription": "Average number of instructions finished in the LSU per completed instruction", 543 "MetricExpr": "PM_LSU_FIN / PM_RUN_INST_CMPL", 544 "MetricGroup": "General", 545 "MetricName": "LSU_PER_INST" 546 }, 547 { 548 "BriefDescription": "Average number of instructions finished in the VSU per completed instruction", 549 "MetricExpr": "PM_VSU_FIN / PM_RUN_INST_CMPL", 550 "MetricGroup": "General", 551 "MetricName": "VSU_PER_INST" 552 }, 553 { 554 "BriefDescription": "Average number of TLBIE instructions finished in the LSU per completed instruction", 555 "MetricExpr": "PM_TLBIE_FIN / PM_RUN_INST_CMPL", 556 "MetricGroup": "General", 557 "MetricName": "TLBIE_PER_INST" 558 }, 559 { 560 "BriefDescription": "Average number of STCX instructions finshed per completed instruction", 561 "MetricExpr": "PM_STCX_FIN / PM_RUN_INST_CMPL", 562 "MetricGroup": "General", 563 "MetricName": "STXC_PER_INST" 564 }, 565 { 566 "BriefDescription": "Average number of LARX instructions finshed per completed instruction", 567 "MetricExpr": "PM_LARX_FIN / PM_RUN_INST_CMPL", 568 "MetricGroup": "General", 569 "MetricName": "LARX_PER_INST" 570 }, 571 { 572 "BriefDescription": "Average number of PTESYNC instructions finshed per completed instruction", 573 "MetricExpr": "PM_PTESYNC_FIN / PM_RUN_INST_CMPL", 574 "MetricGroup": "General", 575 "MetricName": "PTESYNC_PER_INST" 576 }, 577 { 578 "BriefDescription": "Average number of simple fixed-point instructions finshed in the store unit per completed instruction", 579 "MetricExpr": "PM_FX_LSU_FIN / PM_RUN_INST_CMPL", 580 "MetricGroup": "General", 581 "MetricName": "FX_PER_INST" 582 }, 583 { 584 "BriefDescription": "Percentage of demand load misses that reloaded the L1 cache", 585 "MetricExpr": "PM_LD_DEMAND_MISS_L1 / PM_LD_MISS_L1 * 100", 586 "MetricGroup": "General", 587 "MetricName": "DL1_MISS_RELOADS", 588 "ScaleUnit": "1%" 589 }, 590 { 591 "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L2", 592 "MetricExpr": "PM_DATA_FROM_L2MISS / PM_LD_DEMAND_MISS_L1 * 100", 593 "MetricGroup": "dL1_Reloads", 594 "MetricName": "DL1_RELOAD_FROM_L2_MISS", 595 "ScaleUnit": "1%" 596 }, 597 { 598 "BriefDescription": "Percentage of demand load misses that reloaded from beyond the local L3", 599 "MetricExpr": "PM_DATA_FROM_L3MISS / PM_LD_DEMAND_MISS_L1 * 100", 600 "MetricGroup": "dL1_Reloads", 601 "MetricName": "DL1_RELOAD_FROM_L3_MISS", 602 "ScaleUnit": "1%" 603 }, 604 { 605 "BriefDescription": "Percentage of cycles stalled due to the NTC instruction waiting for a load miss to resolve from a source beyond the local L2 and local L3", 606 "MetricExpr": "DMISS_L3MISS_STALL_CPI / RUN_CPI * 100", 607 "MetricGroup": "General", 608 "MetricName": "DCACHE_MISS_CPI", 609 "ScaleUnit": "1%" 610 }, 611 { 612 "BriefDescription": "Percentage of DERAT misses with 2M page size per completed instruction", 613 "MetricExpr": "PM_DERAT_MISS_2M / PM_RUN_INST_CMPL * 100", 614 "MetricGroup": "Translation", 615 "MetricName": "DERAT_2M_MISS_RATE", 616 "ScaleUnit": "1%" 617 }, 618 { 619 "BriefDescription": "Percentage of DERAT misses with 16M page size per completed instruction", 620 "MetricExpr": "PM_DERAT_MISS_16M / PM_RUN_INST_CMPL * 100", 621 "MetricGroup": "Translation", 622 "MetricName": "DERAT_16M_MISS_RATE", 623 "ScaleUnit": "1%" 624 }, 625 { 626 "BriefDescription": "DERAT miss ratio for 4K page size", 627 "MetricExpr": "PM_DERAT_MISS_4K / PM_DERAT_MISS", 628 "MetricGroup": "Translation", 629 "MetricName": "DERAT_4K_MISS_RATIO" 630 }, 631 { 632 "BriefDescription": "DERAT miss ratio for 2M page size", 633 "MetricExpr": "PM_DERAT_MISS_2M / PM_DERAT_MISS", 634 "MetricGroup": "Translation", 635 "MetricName": "DERAT_2M_MISS_RATIO" 636 }, 637 { 638 "BriefDescription": "DERAT miss ratio for 16M page size", 639 "MetricExpr": "PM_DERAT_MISS_16M / PM_DERAT_MISS", 640 "MetricGroup": "Translation", 641 "MetricName": "DERAT_16M_MISS_RATIO" 642 }, 643 { 644 "BriefDescription": "DERAT miss ratio for 64K page size", 645 "MetricExpr": "PM_DERAT_MISS_64K / PM_DERAT_MISS", 646 "MetricGroup": "Translation", 647 "MetricName": "DERAT_64K_MISS_RATIO" 648 }, 649 { 650 "BriefDescription": "Percentage of DERAT misses that resulted in TLB reloads", 651 "MetricExpr": "PM_DTLB_MISS / PM_DERAT_MISS * 100", 652 "MetricGroup": "Translation", 653 "MetricName": "DERAT_MISS_RELOAD", 654 "ScaleUnit": "1%" 655 }, 656 { 657 "BriefDescription": "Percentage of icache misses that were reloaded from beyond the local L3", 658 "MetricExpr": "PM_INST_FROM_L3MISS / PM_L1_ICACHE_MISS * 100", 659 "MetricGroup": "Instruction_Misses", 660 "MetricName": "INST_FROM_L3_MISS", 661 "ScaleUnit": "1%" 662 }, 663 { 664 "BriefDescription": "Percentage of icache reloads from the beyond the L3 per completed instruction", 665 "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100", 666 "MetricGroup": "Instruction_Misses", 667 "MetricName": "INST_FROM_L3_MISS_RATE", 668 "ScaleUnit": "1%" 669 } 670] 671