1perf-trace(1) 2============= 3 4NAME 5---- 6perf-trace - strace inspired tool 7 8SYNOPSIS 9-------- 10[verse] 11'perf trace' 12'perf trace record' 13 14DESCRIPTION 15----------- 16This command will show the events associated with the target, initially 17syscalls, but other system events like pagefaults, task lifetime events, 18scheduling events, etc. 19 20This is a live mode tool in addition to working with perf.data files like 21the other perf tools. Files can be generated using the 'perf record' command 22but the session needs to include the raw_syscalls events (-e 'raw_syscalls:*'). 23Alternatively, 'perf trace record' can be used as a shortcut to 24automatically include the raw_syscalls events when writing events to a file. 25 26The following options apply to perf trace; options to perf trace record are 27found in the perf record man page. 28 29OPTIONS 30------- 31 32-a:: 33--all-cpus:: 34 System-wide collection from all CPUs. 35 36-e:: 37--expr:: 38--event:: 39 List of syscalls and other perf events (tracepoints, HW cache events, 40 etc) to show. Globbing is supported, e.g.: "epoll_*", "*msg*", etc. 41 See 'perf list' for a complete list of events. 42 Prefixing with ! shows all syscalls but the ones specified. You may 43 need to escape it. 44 45-D msecs:: 46--delay msecs:: 47After starting the program, wait msecs before measuring. This is useful to 48filter out the startup phase of the program, which is often very different. 49 50-o:: 51--output=:: 52 Output file name. 53 54-p:: 55--pid=:: 56 Record events on existing process ID (comma separated list). 57 58-t:: 59--tid=:: 60 Record events on existing thread ID (comma separated list). 61 62-u:: 63--uid=:: 64 Record events in threads owned by uid. Name or number. 65 66-G:: 67--cgroup:: 68 Record events in threads in a cgroup. 69 70 Look for cgroups to set at the /sys/fs/cgroup/perf_event directory, then 71 remove the /sys/fs/cgroup/perf_event/ part and try: 72 73 perf trace -G A -e sched:*switch 74 75 Will set all raw_syscalls:sys_{enter,exit}, pgfault, vfs_getname, etc 76 _and_ sched:sched_switch to the 'A' cgroup, while: 77 78 perf trace -e sched:*switch -G A 79 80 will only set the sched:sched_switch event to the 'A' cgroup, all the 81 other events (raw_syscalls:sys_{enter,exit}, etc are left "without" 82 a cgroup (on the root cgroup, sys wide, etc). 83 84 Multiple cgroups: 85 86 perf trace -G A -e sched:*switch -G B 87 88 the syscall ones go to the 'A' cgroup, the sched:sched_switch goes 89 to the 'B' cgroup. 90 91--filter-pids=:: 92 Filter out events for these pids and for 'trace' itself (comma separated list). 93 94-v:: 95--verbose=:: 96 Verbosity level. 97 98--no-inherit:: 99 Child tasks do not inherit counters. 100 101-m:: 102--mmap-pages=:: 103 Number of mmap data pages (must be a power of two) or size 104 specification with appended unit character - B/K/M/G. The 105 size is rounded up to have nearest pages power of two value. 106 107-C:: 108--cpu:: 109Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a 110comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. 111In per-thread mode with inheritance mode on (default), Events are captured only when 112the thread executes on the designated CPUs. Default is to monitor all CPUs. 113 114--duration:: 115 Show only events that had a duration greater than N.M ms. 116 117--sched:: 118 Accrue thread runtime and provide a summary at the end of the session. 119 120-i:: 121--input:: 122 Process events from a given perf data file. 123 124-T:: 125--time:: 126 Print full timestamp rather time relative to first sample. 127 128--comm:: 129 Show process COMM right beside its ID, on by default, disable with --no-comm. 130 131-s:: 132--summary:: 133 Show only a summary of syscalls by thread with min, max, and average times 134 (in msec) and relative stddev. 135 136-S:: 137--with-summary:: 138 Show all syscalls followed by a summary by thread with min, max, and 139 average times (in msec) and relative stddev. 140 141--tool_stats:: 142 Show tool stats such as number of times fd->pathname was discovered thru 143 hooking the open syscall return + vfs_getname or via reading /proc/pid/fd, etc. 144 145-f:: 146--force:: 147 Don't complain, do it. 148 149-F=[all|min|maj]:: 150--pf=[all|min|maj]:: 151 Trace pagefaults. Optionally, you can specify whether you want minor, 152 major or all pagefaults. Default value is maj. 153 154--syscalls:: 155 Trace system calls. This options is enabled by default, disable with 156 --no-syscalls. 157 158--call-graph [mode,type,min[,limit],order[,key][,branch]]:: 159 Setup and enable call-graph (stack chain/backtrace) recording. 160 See `--call-graph` section in perf-record and perf-report 161 man pages for details. The ones that are most useful in 'perf trace' 162 are 'dwarf' and 'lbr', where available, try: 'perf trace --call-graph dwarf'. 163 164 Using this will, for the root user, bump the value of --mmap-pages to 4 165 times the maximum for non-root users, based on the kernel.perf_event_mlock_kb 166 sysctl. This is done only if the user doesn't specify a --mmap-pages value. 167 168--kernel-syscall-graph:: 169 Show the kernel callchains on the syscall exit path. 170 171--max-stack:: 172 Set the stack depth limit when parsing the callchain, anything 173 beyond the specified depth will be ignored. Note that at this point 174 this is just about the presentation part, i.e. the kernel is still 175 not limiting, the overhead of callchains needs to be set via the 176 knobs in --call-graph dwarf. 177 178 Implies '--call-graph dwarf' when --call-graph not present on the 179 command line, on systems where DWARF unwinding was built in. 180 181 Default: /proc/sys/kernel/perf_event_max_stack when present for 182 live sessions (without --input/-i), 127 otherwise. 183 184--min-stack:: 185 Set the stack depth limit when parsing the callchain, anything 186 below the specified depth will be ignored. Disabled by default. 187 188 Implies '--call-graph dwarf' when --call-graph not present on the 189 command line, on systems where DWARF unwinding was built in. 190 191--print-sample:: 192 Print the PERF_RECORD_SAMPLE PERF_SAMPLE_ info for the 193 raw_syscalls:sys_{enter,exit} tracepoints, for debugging. 194 195--proc-map-timeout:: 196 When processing pre-existing threads /proc/XXX/mmap, it may take a long time, 197 because the file may be huge. A time out is needed in such cases. 198 This option sets the time out limit. The default value is 500 ms. 199 200PAGEFAULTS 201---------- 202 203When tracing pagefaults, the format of the trace is as follows: 204 205<min|maj>fault [<ip.symbol>+<ip.offset>] => <addr.dso@addr.offset> (<map type><addr level>). 206 207- min/maj indicates whether fault event is minor or major; 208- ip.symbol shows symbol for instruction pointer (the code that generated the 209 fault); if no debug symbols available, perf trace will print raw IP; 210- addr.dso shows DSO for the faulted address; 211- map type is either 'd' for non-executable maps or 'x' for executable maps; 212- addr level is either 'k' for kernel dso or '.' for user dso. 213 214For symbols resolution you may need to install debugging symbols. 215 216Please be aware that duration is currently always 0 and doesn't reflect actual 217time it took for fault to be handled! 218 219When --verbose specified, perf trace tries to print all available information 220for both IP and fault address in the form of dso@symbol+offset. 221 222EXAMPLES 223-------- 224 225Trace only major pagefaults: 226 227 $ perf trace --no-syscalls -F 228 229Trace syscalls, major and minor pagefaults: 230 231 $ perf trace -F all 232 233 1416.547 ( 0.000 ms): python/20235 majfault [CRYPTO_push_info_+0x0] => /lib/x86_64-linux-gnu/libcrypto.so.1.0.0@0x61be0 (x.) 234 235 As you can see, there was major pagefault in python process, from 236 CRYPTO_push_info_ routine which faulted somewhere in libcrypto.so. 237 238SEE ALSO 239-------- 240linkperf:perf-record[1], linkperf:perf-script[1] 241