1perf-script(1) 2============= 3 4NAME 5---- 6perf-script - Read perf.data (created by perf record) and display trace output 7 8SYNOPSIS 9-------- 10[verse] 11'perf script' [<options>] 12'perf script' [<options>] record <script> [<record-options>] <command> 13'perf script' [<options>] report <script> [script-args] 14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command> 15'perf script' [<options>] <top-script> [script-args] 16 17DESCRIPTION 18----------- 19This command reads the input file and displays the trace recorded. 20 21There are several variants of perf script: 22 23 'perf script' to see a detailed trace of the workload that was 24 recorded. 25 26 You can also run a set of pre-canned scripts that aggregate and 27 summarize the raw trace data in various ways (the list of scripts is 28 available via 'perf script -l'). The following variants allow you to 29 record and run those scripts: 30 31 'perf script record <script> <command>' to record the events required 32 for 'perf script report'. <script> is the name displayed in the 33 output of 'perf script --list' i.e. the actual script name minus any 34 language extension. If <command> is not specified, the events are 35 recorded using the -a (system-wide) 'perf record' option. 36 37 'perf script report <script> [args]' to run and display the results 38 of <script>. <script> is the name displayed in the output of 'perf 39 script --list' i.e. the actual script name minus any language 40 extension. The perf.data output from a previous run of 'perf script 41 record <script>' is used and should be present for this command to 42 succeed. [args] refers to the (mainly optional) args expected by 43 the script. 44 45 'perf script <script> <required-script-args> <command>' to both 46 record the events required for <script> and to run the <script> 47 using 'live-mode' i.e. without writing anything to disk. <script> 48 is the name displayed in the output of 'perf script --list' i.e. the 49 actual script name minus any language extension. If <command> is 50 not specified, the events are recorded using the -a (system-wide) 51 'perf record' option. If <script> has any required args, they 52 should be specified before <command>. This mode doesn't allow for 53 optional script args to be specified; if optional script args are 54 desired, they can be specified using separate 'perf script record' 55 and 'perf script report' commands, with the stdout of the record step 56 piped to the stdin of the report script, using the '-o -' and '-i -' 57 options of the corresponding commands. 58 59 'perf script <top-script>' to both record the events required for 60 <top-script> and to run the <top-script> using 'live-mode' 61 i.e. without writing anything to disk. <top-script> is the name 62 displayed in the output of 'perf script --list' i.e. the actual 63 script name minus any language extension; a <top-script> is defined 64 as any script name ending with the string 'top'. 65 66 [<record-options>] can be passed to the record steps of 'perf script 67 record' and 'live-mode' variants; this isn't possible however for 68 <top-script> 'live-mode' or 'perf script report' variants. 69 70 See the 'SEE ALSO' section for links to language-specific 71 information on how to write and run your own trace scripts. 72 73OPTIONS 74------- 75<command>...:: 76 Any command you can specify in a shell. 77 78-D:: 79--dump-raw-trace=:: 80 Display verbose dump of the trace data. 81 82-L:: 83--Latency=:: 84 Show latency attributes (irqs/preemption disabled, etc). 85 86-l:: 87--list=:: 88 Display a list of available trace scripts. 89 90-s ['lang']:: 91--script=:: 92 Process trace data with the given script ([lang]:script[.ext]). 93 If the string 'lang' is specified in place of a script name, a 94 list of supported languages will be displayed instead. 95 96-g:: 97--gen-script=:: 98 Generate perf-script.[ext] starter script for given language, 99 using current perf.data. 100 101-a:: 102 Force system-wide collection. Scripts run without a <command> 103 normally use -a by default, while scripts run with a <command> 104 normally don't - this option allows the latter to be run in 105 system-wide mode. 106 107-i:: 108--input=:: 109 Input file name. (default: perf.data unless stdin is a fifo) 110 111-d:: 112--debug-mode:: 113 Do various checks like samples ordering and lost events. 114 115-F:: 116--fields:: 117 Comma separated list of fields to print. Options are: 118 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, 119 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn, 120 brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc, srccode, ipc. 121 Field list can be prepended with the type, trace, sw or hw, 122 to indicate to which event type the field list applies. 123 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace 124 125 perf script -F <fields> 126 127 is equivalent to: 128 129 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields> 130 131 i.e., the specified fields apply to all event types if the type string 132 is not given. 133 134 In addition to overriding fields, it is also possible to add or remove 135 fields from the defaults. For example 136 137 -F -cpu,+insn 138 139 removes the cpu field and adds the insn field. Adding/removing fields 140 cannot be mixed with normal overriding. 141 142 The arguments are processed in the order received. A later usage can 143 reset a prior request. e.g.: 144 145 -F trace: -F comm,tid,time,ip,sym 146 147 The first -F suppresses trace events (field list is ""), but then the 148 second invocation sets the fields to comm,tid,time,ip,sym. In this case a 149 warning is given to the user: 150 151 "Overriding previous field request for all events." 152 153 Alternatively, consider the order: 154 155 -F comm,tid,time,ip,sym -F trace: 156 157 The first -F sets the fields for all events and the second -F 158 suppresses trace events. The user is given a warning message about 159 the override, and the result of the above is that only S/W and H/W 160 events are displayed with the given fields. 161 162 It's possible tp add/remove fields only for specific event type: 163 164 -Fsw:-cpu,-period 165 166 removes cpu and period from software events. 167 168 For the 'wildcard' option if a user selected field is invalid for an 169 event type, a message is displayed to the user that the option is 170 ignored for that type. For example: 171 172 $ perf script -F comm,tid,trace 173 'trace' not valid for hardware events. Ignoring. 174 'trace' not valid for software events. Ignoring. 175 176 Alternatively, if the type is given an invalid field is specified it 177 is an error. For example: 178 179 perf script -v -F sw:comm,tid,trace 180 'trace' not valid for software events. 181 182 At this point usage is displayed, and perf-script exits. 183 184 The flags field is synthesized and may have a value when Instruction 185 Trace decoding. The flags are "bcrosyiABEx" which stand for branch, 186 call, return, conditional, system, asynchronous, interrupt, 187 transaction abort, trace begin, trace end, and in transaction, 188 respectively. Known combinations of flags are printed more nicely e.g. 189 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b", 190 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs", 191 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB", 192 "tr end" for "bE". However the "x" flag will be display separately in those 193 cases e.g. "jcc (x)" for a condition branch within a transaction. 194 195 The callindent field is synthesized and may have a value when 196 Instruction Trace decoding. For calls and returns, it will display the 197 name of the symbol indented with spaces to reflect the stack depth. 198 199 When doing instruction trace decoding insn and insnlen give the 200 instruction bytes and the instruction length of the current 201 instruction. 202 203 The synth field is used by synthesized events which may be created when 204 Instruction Trace decoding. 205 206 The ipc (instructions per cycle) field is synthesized and may have a value when 207 Instruction Trace decoding. 208 209 Finally, a user may not set fields to none for all event types. 210 i.e., -F "" is not allowed. 211 212 The brstack output includes branch related information with raw addresses using the 213 /v/v/v/v/cycles syntax in the following order: 214 FROM: branch source instruction 215 TO : branch target instruction 216 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported 217 X/- : X=branch inside a transactional region, -=not in transaction region or not supported 218 A/- : A=TSX abort entry, -=not aborted region or not supported 219 cycles 220 221 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible. 222 223 When brstackinsn is specified the full assembler sequences of branch sequences for each sample 224 is printed. This is the full execution path leading to the sample. This is only supported when the 225 sample was recorded with perf record -b or -j any. 226 227 The brstackoff field will print an offset into a specific dso/binary. 228 229 With the metric option perf script can compute metrics for 230 sampling periods, similar to perf stat. This requires 231 specifying a group with multiple events defining metrics with the :S option 232 for perf record. perf will sample on the first event, and 233 print computed metrics for all the events in the group. Please note 234 that the metric computed is averaged over the whole sampling 235 period (since the last sample), not just for the sample point. 236 237 For sample events it's possible to display misc field with -F +misc option, 238 following letters are displayed for each bit: 239 240 PERF_RECORD_MISC_KERNEL K 241 PERF_RECORD_MISC_USER U 242 PERF_RECORD_MISC_HYPERVISOR H 243 PERF_RECORD_MISC_GUEST_KERNEL G 244 PERF_RECORD_MISC_GUEST_USER g 245 PERF_RECORD_MISC_MMAP_DATA* M 246 PERF_RECORD_MISC_COMM_EXEC E 247 PERF_RECORD_MISC_SWITCH_OUT S 248 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp 249 250 $ perf script -F +misc ... 251 sched-messaging 1414 K 28690.636582: 4590 cycles ... 252 sched-messaging 1407 U 28690.636600: 325620 cycles ... 253 sched-messaging 1414 K 28690.636608: 19473 cycles ... 254 misc field ___________/ 255 256-k:: 257--vmlinux=<file>:: 258 vmlinux pathname 259 260--kallsyms=<file>:: 261 kallsyms pathname 262 263--symfs=<directory>:: 264 Look for files with symbols relative to this directory. 265 266-G:: 267--hide-call-graph:: 268 When printing symbols do not display call chain. 269 270--stop-bt:: 271 Stop display of callgraph at these symbols 272 273-C:: 274--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can 275 be provided as a comma-separated list with no space: 0,1. Ranges of 276 CPUs are specified with -: 0-2. Default is to report samples on all 277 CPUs. 278 279-c:: 280--comms=:: 281 Only display events for these comms. CSV that understands 282 file://filename entries. 283 284--pid=:: 285 Only show events for given process ID (comma separated list). 286 287--tid=:: 288 Only show events for given thread ID (comma separated list). 289 290-I:: 291--show-info:: 292 Display extended information about the perf.data file. This adds 293 information which may be very large and thus may clutter the display. 294 It currently includes: cpu and numa topology of the host system. 295 It can only be used with the perf script report mode. 296 297--show-kernel-path:: 298 Try to resolve the path of [kernel.kallsyms] 299 300--show-task-events 301 Display task related events (e.g. FORK, COMM, EXIT). 302 303--show-mmap-events 304 Display mmap related events (e.g. MMAP, MMAP2). 305 306--show-namespace-events 307 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES. 308 309--show-switch-events 310 Display context switch events i.e. events of type PERF_RECORD_SWITCH or 311 PERF_RECORD_SWITCH_CPU_WIDE. 312 313--show-lost-events 314 Display lost events i.e. events of type PERF_RECORD_LOST. 315 316--show-round-events 317 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND. 318 319--show-bpf-events 320 Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT. 321 322--show-cgroup-events 323 Display cgroup events i.e. events of type PERF_RECORD_CGROUP. 324 325--show-text-poke-events 326 Display text poke events i.e. events of type PERF_RECORD_TEXT_POKE and 327 PERF_RECORD_KSYMBOL. 328 329--demangle:: 330 Demangle symbol names to human readable form. It's enabled by default, 331 disable with --no-demangle. 332 333--demangle-kernel:: 334 Demangle kernel symbol names to human readable form (for C++ kernels). 335 336--header 337 Show perf.data header. 338 339--header-only 340 Show only perf.data header. 341 342--itrace:: 343 Options for decoding instruction tracing data. The options are: 344 345include::itrace.txt[] 346 347 To disable decoding entirely, use --no-itrace. 348 349--full-source-path:: 350 Show the full path for source files for srcline output. 351 352--max-stack:: 353 Set the stack depth limit when parsing the callchain, anything 354 beyond the specified depth will be ignored. This is a trade-off 355 between information loss and faster processing especially for 356 workloads that can have a very long callchain stack. 357 Note that when using the --itrace option the synthesized callchain size 358 will override this value if the synthesized callchain size is bigger. 359 360 Default: 127 361 362--ns:: 363 Use 9 decimal places when displaying time (i.e. show the nanoseconds) 364 365-f:: 366--force:: 367 Don't do ownership validation. 368 369--time:: 370 Only analyze samples within given time window: <start>,<stop>. Times 371 have the format seconds.nanoseconds. If start is not given (i.e. time 372 string is ',x.y') then analysis starts at the beginning of the file. If 373 stop time is not given (i.e. time string is 'x.y,') then analysis goes 374 to end of file. Multiple ranges can be separated by spaces, which 375 requires the argument to be quoted e.g. --time "1234.567,1234.789 1235," 376 377 Also support time percent with multiple time ranges. Time string is 378 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. 379 380 For example: 381 Select the second 10% time slice: 382 perf script --time 10%/2 383 384 Select from 0% to 10% time slice: 385 perf script --time 0%-10% 386 387 Select the first and second 10% time slices: 388 perf script --time 10%/1,10%/2 389 390 Select from 0% to 10% and 30% to 40% slices: 391 perf script --time 0%-10%,30%-40% 392 393--max-blocks:: 394 Set the maximum number of program blocks to print with brstackinsn for 395 each sample. 396 397--reltime:: 398 Print time stamps relative to trace start. 399 400--deltatime:: 401 Print time stamps relative to previous event. 402 403--per-event-dump:: 404 Create per event files with a "perf.data.EVENT.dump" name instead of 405 printing to stdout, useful, for instance, for generating flamegraphs. 406 407--inline:: 408 If a callgraph address belongs to an inlined function, the inline stack 409 will be printed. Each entry has function name and file/line. Enabled by 410 default, disable with --no-inline. 411 412--insn-trace:: 413 Show instruction stream for intel_pt traces. Combine with --xed to 414 show disassembly. 415 416--xed:: 417 Run xed disassembler on output. Requires installing the xed disassembler. 418 419-S:: 420--symbols=symbol[,symbol...]:: 421 Only consider the listed symbols. Symbols are typically a name 422 but they may also be hexadecimal address. 423 424 For example, to select the symbol noploop or the address 0x4007a0: 425 perf script --symbols=noploop,0x4007a0 426 427--call-trace:: 428 Show call stream for intel_pt traces. The CPUs are interleaved, but 429 can be filtered with -C. 430 431--call-ret-trace:: 432 Show call and return stream for intel_pt traces. 433 434--graph-function:: 435 For itrace only show specified functions and their callees for 436 itrace. Multiple functions can be separated by comma. 437 438--switch-on EVENT_NAME:: 439 Only consider events after this event is found. 440 441--switch-off EVENT_NAME:: 442 Stop considering events after this event is found. 443 444--show-on-off-events:: 445 Show the --switch-on/off events too. 446 447--stitch-lbr:: 448 Show callgraph with stitched LBRs, which may have more complete 449 callgraph. The perf.data file must have been obtained using 450 perf record --call-graph lbr. 451 Disabled by default. In common cases with call stack overflows, 452 it can recreate better call stacks than the default lbr call stack 453 output. But this approach is not full proof. There can be cases 454 where it creates incorrect call stacks from incorrect matches. 455 The known limitations include exception handing such as 456 setjmp/longjmp will have calls/returns not match. 457 458SEE ALSO 459-------- 460linkperf:perf-record[1], linkperf:perf-script-perl[1], 461linkperf:perf-script-python[1], linkperf:perf-intel-pt[1] 462