1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23  'perf script' to see a detailed trace of the workload that was
24  recorded.
25
26  You can also run a set of pre-canned scripts that aggregate and
27  summarize the raw trace data in various ways (the list of scripts is
28  available via 'perf script -l').  The following variants allow you to
29  record and run those scripts:
30
31  'perf script record <script> <command>' to record the events required
32  for 'perf script report'.  <script> is the name displayed in the
33  output of 'perf script --list' i.e. the actual script name minus any
34  language extension.  If <command> is not specified, the events are
35  recorded using the -a (system-wide) 'perf record' option.
36
37  'perf script report <script> [args]' to run and display the results
38  of <script>.  <script> is the name displayed in the output of 'perf
39  trace --list' i.e. the actual script name minus any language
40  extension.  The perf.data output from a previous run of 'perf script
41  record <script>' is used and should be present for this command to
42  succeed.  [args] refers to the (mainly optional) args expected by
43  the script.
44
45  'perf script <script> <required-script-args> <command>' to both
46  record the events required for <script> and to run the <script>
47  using 'live-mode' i.e. without writing anything to disk.  <script>
48  is the name displayed in the output of 'perf script --list' i.e. the
49  actual script name minus any language extension.  If <command> is
50  not specified, the events are recorded using the -a (system-wide)
51  'perf record' option.  If <script> has any required args, they
52  should be specified before <command>.  This mode doesn't allow for
53  optional script args to be specified; if optional script args are
54  desired, they can be specified using separate 'perf script record'
55  and 'perf script report' commands, with the stdout of the record step
56  piped to the stdin of the report script, using the '-o -' and '-i -'
57  options of the corresponding commands.
58
59  'perf script <top-script>' to both record the events required for
60  <top-script> and to run the <top-script> using 'live-mode'
61  i.e. without writing anything to disk.  <top-script> is the name
62  displayed in the output of 'perf script --list' i.e. the actual
63  script name minus any language extension; a <top-script> is defined
64  as any script name ending with the string 'top'.
65
66  [<record-options>] can be passed to the record steps of 'perf script
67  record' and 'live-mode' variants; this isn't possible however for
68  <top-script> 'live-mode' or 'perf script report' variants.
69
70  See the 'SEE ALSO' section for links to language-specific
71  information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76	Any command you can specify in a shell.
77
78-D::
79--dump-raw-script=::
80        Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84        Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88        Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92        Process trace data with the given script ([lang]:script[.ext]).
93	If the string 'lang' is specified in place of a script name, a
94        list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98        Generate perf-script.[ext] starter script for given language,
99        using current perf.data.
100
101-a::
102        Force system-wide collection.  Scripts run without a <command>
103        normally use -a by default, while scripts run with a <command>
104        normally don't - this option allows the latter to be run in
105        system-wide mode.
106
107-i::
108--input=::
109        Input file name.
110
111-d::
112--debug-mode::
113        Do various checks like samples ordering and lost events.
114
115-f::
116--fields::
117        Comma separated list of fields to print. Options are:
118        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr.
119        Field list can be prepended with the type, trace, sw or hw,
120        to indicate to which event type the field list applies.
121        e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
122
123		perf script -f <fields>
124
125	is equivalent to:
126
127		perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
128
129	i.e., the specified fields apply to all event types if the type string
130	is not given.
131
132	The arguments are processed in the order received. A later usage can
133	reset a prior request. e.g.:
134
135		-f trace: -f comm,tid,time,ip,sym
136
137	The first -f suppresses trace events (field list is ""), but then the
138	second invocation sets the fields to comm,tid,time,ip,sym. In this case a
139	warning is given to the user:
140
141		"Overriding previous field request for all events."
142
143	Alternativey, consider the order:
144
145		-f comm,tid,time,ip,sym -f trace:
146
147	The first -f sets the fields for all events and the second -f
148	suppresses trace events. The user is given a warning message about
149	the override, and the result of the above is that only S/W and H/W
150	events are displayed with the given fields.
151
152	For the 'wildcard' option if a user selected field is invalid for an
153	event type, a message is displayed to the user that the option is
154	ignored for that type. For example:
155
156		$ perf script -f comm,tid,trace
157		'trace' not valid for hardware events. Ignoring.
158		'trace' not valid for software events. Ignoring.
159
160	Alternatively, if the type is given an invalid field is specified it
161	is an error. For example:
162
163        perf script -v -f sw:comm,tid,trace
164        'trace' not valid for software events.
165
166	At this point usage is displayed, and perf-script exits.
167
168	Finally, a user may not set fields to none for all event types.
169	i.e., -f "" is not allowed.
170
171-k::
172--vmlinux=<file>::
173        vmlinux pathname
174
175--kallsyms=<file>::
176        kallsyms pathname
177
178--symfs=<directory>::
179        Look for files with symbols relative to this directory.
180
181-G::
182--hide-call-graph::
183        When printing symbols do not display call chain.
184
185-c::
186--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
187	be provided as a comma-separated list with no space: 0,1. Ranges of
188	CPUs are specified with -: 0-2. Default is to report samples on all
189	CPUs.
190
191SEE ALSO
192--------
193linkperf:perf-record[1], linkperf:perf-script-perl[1],
194linkperf:perf-script-python[1]
195