1perf-script(1)
2=============
3
4NAME
5----
6perf-script - Read perf.data (created by perf record) and display trace output
7
8SYNOPSIS
9--------
10[verse]
11'perf script' [<options>]
12'perf script' [<options>] record <script> [<record-options>] <command>
13'perf script' [<options>] report <script> [script-args]
14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
15'perf script' [<options>] <top-script> [script-args]
16
17DESCRIPTION
18-----------
19This command reads the input file and displays the trace recorded.
20
21There are several variants of perf script:
22
23  'perf script' to see a detailed trace of the workload that was
24  recorded.
25
26  You can also run a set of pre-canned scripts that aggregate and
27  summarize the raw trace data in various ways (the list of scripts is
28  available via 'perf script -l').  The following variants allow you to
29  record and run those scripts:
30
31  'perf script record <script> <command>' to record the events required
32  for 'perf script report'.  <script> is the name displayed in the
33  output of 'perf script --list' i.e. the actual script name minus any
34  language extension.  If <command> is not specified, the events are
35  recorded using the -a (system-wide) 'perf record' option.
36
37  'perf script report <script> [args]' to run and display the results
38  of <script>.  <script> is the name displayed in the output of 'perf
39  trace --list' i.e. the actual script name minus any language
40  extension.  The perf.data output from a previous run of 'perf script
41  record <script>' is used and should be present for this command to
42  succeed.  [args] refers to the (mainly optional) args expected by
43  the script.
44
45  'perf script <script> <required-script-args> <command>' to both
46  record the events required for <script> and to run the <script>
47  using 'live-mode' i.e. without writing anything to disk.  <script>
48  is the name displayed in the output of 'perf script --list' i.e. the
49  actual script name minus any language extension.  If <command> is
50  not specified, the events are recorded using the -a (system-wide)
51  'perf record' option.  If <script> has any required args, they
52  should be specified before <command>.  This mode doesn't allow for
53  optional script args to be specified; if optional script args are
54  desired, they can be specified using separate 'perf script record'
55  and 'perf script report' commands, with the stdout of the record step
56  piped to the stdin of the report script, using the '-o -' and '-i -'
57  options of the corresponding commands.
58
59  'perf script <top-script>' to both record the events required for
60  <top-script> and to run the <top-script> using 'live-mode'
61  i.e. without writing anything to disk.  <top-script> is the name
62  displayed in the output of 'perf script --list' i.e. the actual
63  script name minus any language extension; a <top-script> is defined
64  as any script name ending with the string 'top'.
65
66  [<record-options>] can be passed to the record steps of 'perf script
67  record' and 'live-mode' variants; this isn't possible however for
68  <top-script> 'live-mode' or 'perf script report' variants.
69
70  See the 'SEE ALSO' section for links to language-specific
71  information on how to write and run your own trace scripts.
72
73OPTIONS
74-------
75<command>...::
76	Any command you can specify in a shell.
77
78-D::
79--dump-raw-script=::
80        Display verbose dump of the trace data.
81
82-L::
83--Latency=::
84        Show latency attributes (irqs/preemption disabled, etc).
85
86-l::
87--list=::
88        Display a list of available trace scripts.
89
90-s ['lang']::
91--script=::
92        Process trace data with the given script ([lang]:script[.ext]).
93	If the string 'lang' is specified in place of a script name, a
94        list of supported languages will be displayed instead.
95
96-g::
97--gen-script=::
98        Generate perf-script.[ext] starter script for given language,
99        using current perf.data.
100
101-a::
102        Force system-wide collection.  Scripts run without a <command>
103        normally use -a by default, while scripts run with a <command>
104        normally don't - this option allows the latter to be run in
105        system-wide mode.
106
107-i::
108--input=::
109        Input file name. (default: perf.data unless stdin is a fifo)
110
111-d::
112--debug-mode::
113        Do various checks like samples ordering and lost events.
114
115-F::
116--fields::
117        Comma separated list of fields to print. Options are:
118        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
119	srcline, period, iregs, brstack, brstacksym, flags.
120        Field list can be prepended with the type, trace, sw or hw,
121        to indicate to which event type the field list applies.
122        e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
123
124		perf script -f <fields>
125
126	is equivalent to:
127
128		perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>
129
130	i.e., the specified fields apply to all event types if the type string
131	is not given.
132
133	The arguments are processed in the order received. A later usage can
134	reset a prior request. e.g.:
135
136		-f trace: -f comm,tid,time,ip,sym
137
138	The first -f suppresses trace events (field list is ""), but then the
139	second invocation sets the fields to comm,tid,time,ip,sym. In this case a
140	warning is given to the user:
141
142		"Overriding previous field request for all events."
143
144	Alternatively, consider the order:
145
146		-f comm,tid,time,ip,sym -f trace:
147
148	The first -f sets the fields for all events and the second -f
149	suppresses trace events. The user is given a warning message about
150	the override, and the result of the above is that only S/W and H/W
151	events are displayed with the given fields.
152
153	For the 'wildcard' option if a user selected field is invalid for an
154	event type, a message is displayed to the user that the option is
155	ignored for that type. For example:
156
157		$ perf script -f comm,tid,trace
158		'trace' not valid for hardware events. Ignoring.
159		'trace' not valid for software events. Ignoring.
160
161	Alternatively, if the type is given an invalid field is specified it
162	is an error. For example:
163
164        perf script -v -f sw:comm,tid,trace
165        'trace' not valid for software events.
166
167	At this point usage is displayed, and perf-script exits.
168
169	The flags field is synthesized and may have a value when Instruction
170	Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
171	call, return, conditional, system, asynchronous, interrupt,
172	transaction abort, trace begin, trace end, and in transaction,
173	respectively.
174
175	Finally, a user may not set fields to none for all event types.
176	i.e., -f "" is not allowed.
177
178	The brstack output includes branch related information with raw addresses using the
179	/v/v/v/v/ syntax in the following order:
180	FROM: branch source instruction
181	TO  : branch target instruction
182        M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
183	X/- : X=branch inside a transactional region, -=not in transaction region or not supported
184	A/- : A=TSX abort entry, -=not aborted region or not supported
185
186	The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
187
188-k::
189--vmlinux=<file>::
190        vmlinux pathname
191
192--kallsyms=<file>::
193        kallsyms pathname
194
195--symfs=<directory>::
196        Look for files with symbols relative to this directory.
197
198-G::
199--hide-call-graph::
200        When printing symbols do not display call chain.
201
202-C::
203--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
204	be provided as a comma-separated list with no space: 0,1. Ranges of
205	CPUs are specified with -: 0-2. Default is to report samples on all
206	CPUs.
207
208-c::
209--comms=::
210	Only display events for these comms. CSV that understands
211	file://filename entries.
212
213--pid=::
214	Only show events for given process ID (comma separated list).
215
216--tid=::
217	Only show events for given thread ID (comma separated list).
218
219-I::
220--show-info::
221	Display extended information about the perf.data file. This adds
222	information which may be very large and thus may clutter the display.
223	It currently includes: cpu and numa topology of the host system.
224	It can only be used with the perf script report mode.
225
226--show-kernel-path::
227	Try to resolve the path of [kernel.kallsyms]
228
229--show-task-events
230	Display task related events (e.g. FORK, COMM, EXIT).
231
232--show-mmap-events
233	Display mmap related events (e.g. MMAP, MMAP2).
234
235--show-switch-events
236	Display context switch events i.e. events of type PERF_RECORD_SWITCH or
237	PERF_RECORD_SWITCH_CPU_WIDE.
238
239--demangle::
240	Demangle symbol names to human readable form. It's enabled by default,
241	disable with --no-demangle.
242
243--demangle-kernel::
244	Demangle kernel symbol names to human readable form (for C++ kernels).
245
246--header
247	Show perf.data header.
248
249--header-only
250	Show only perf.data header.
251
252--itrace::
253	Options for decoding instruction tracing data. The options are:
254
255include::itrace.txt[]
256
257	To disable decoding entirely, use --no-itrace.
258
259--full-source-path::
260	Show the full path for source files for srcline output.
261
262--ns::
263	Use 9 decimal places when displaying time (i.e. show the nanoseconds)
264
265SEE ALSO
266--------
267linkperf:perf-record[1], linkperf:perf-script-perl[1],
268linkperf:perf-script-python[1]
269