1perf-script(1) 2============= 3 4NAME 5---- 6perf-script - Read perf.data (created by perf record) and display trace output 7 8SYNOPSIS 9-------- 10[verse] 11'perf script' [<options>] 12'perf script' [<options>] record <script> [<record-options>] <command> 13'perf script' [<options>] report <script> [script-args] 14'perf script' [<options>] <script> <required-script-args> [<record-options>] <command> 15'perf script' [<options>] <top-script> [script-args] 16 17DESCRIPTION 18----------- 19This command reads the input file and displays the trace recorded. 20 21There are several variants of perf script: 22 23 'perf script' to see a detailed trace of the workload that was 24 recorded. 25 26 You can also run a set of pre-canned scripts that aggregate and 27 summarize the raw trace data in various ways (the list of scripts is 28 available via 'perf script -l'). The following variants allow you to 29 record and run those scripts: 30 31 'perf script record <script> <command>' to record the events required 32 for 'perf script report'. <script> is the name displayed in the 33 output of 'perf script --list' i.e. the actual script name minus any 34 language extension. If <command> is not specified, the events are 35 recorded using the -a (system-wide) 'perf record' option. 36 37 'perf script report <script> [args]' to run and display the results 38 of <script>. <script> is the name displayed in the output of 'perf 39 script --list' i.e. the actual script name minus any language 40 extension. The perf.data output from a previous run of 'perf script 41 record <script>' is used and should be present for this command to 42 succeed. [args] refers to the (mainly optional) args expected by 43 the script. 44 45 'perf script <script> <required-script-args> <command>' to both 46 record the events required for <script> and to run the <script> 47 using 'live-mode' i.e. without writing anything to disk. <script> 48 is the name displayed in the output of 'perf script --list' i.e. the 49 actual script name minus any language extension. If <command> is 50 not specified, the events are recorded using the -a (system-wide) 51 'perf record' option. If <script> has any required args, they 52 should be specified before <command>. This mode doesn't allow for 53 optional script args to be specified; if optional script args are 54 desired, they can be specified using separate 'perf script record' 55 and 'perf script report' commands, with the stdout of the record step 56 piped to the stdin of the report script, using the '-o -' and '-i -' 57 options of the corresponding commands. 58 59 'perf script <top-script>' to both record the events required for 60 <top-script> and to run the <top-script> using 'live-mode' 61 i.e. without writing anything to disk. <top-script> is the name 62 displayed in the output of 'perf script --list' i.e. the actual 63 script name minus any language extension; a <top-script> is defined 64 as any script name ending with the string 'top'. 65 66 [<record-options>] can be passed to the record steps of 'perf script 67 record' and 'live-mode' variants; this isn't possible however for 68 <top-script> 'live-mode' or 'perf script report' variants. 69 70 See the 'SEE ALSO' section for links to language-specific 71 information on how to write and run your own trace scripts. 72 73OPTIONS 74------- 75<command>...:: 76 Any command you can specify in a shell. 77 78-D:: 79--dump-raw-trace=:: 80 Display verbose dump of the trace data. 81 82-L:: 83--Latency=:: 84 Show latency attributes (irqs/preemption disabled, etc). 85 86-l:: 87--list=:: 88 Display a list of available trace scripts. 89 90-s ['lang']:: 91--script=:: 92 Process trace data with the given script ([lang]:script[.ext]). 93 If the string 'lang' is specified in place of a script name, a 94 list of supported languages will be displayed instead. 95 96-g:: 97--gen-script=:: 98 Generate perf-script.[ext] starter script for given language, 99 using current perf.data. 100 101-a:: 102 Force system-wide collection. Scripts run without a <command> 103 normally use -a by default, while scripts run with a <command> 104 normally don't - this option allows the latter to be run in 105 system-wide mode. 106 107-i:: 108--input=:: 109 Input file name. (default: perf.data unless stdin is a fifo) 110 111-d:: 112--debug-mode:: 113 Do various checks like samples ordering and lost events. 114 115-F:: 116--fields:: 117 Comma separated list of fields to print. Options are: 118 comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff, 119 srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn, 120 brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc, srccode. 121 Field list can be prepended with the type, trace, sw or hw, 122 to indicate to which event type the field list applies. 123 e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace 124 125 perf script -F <fields> 126 127 is equivalent to: 128 129 perf script -F trace:<fields> -F sw:<fields> -F hw:<fields> 130 131 i.e., the specified fields apply to all event types if the type string 132 is not given. 133 134 In addition to overriding fields, it is also possible to add or remove 135 fields from the defaults. For example 136 137 -F -cpu,+insn 138 139 removes the cpu field and adds the insn field. Adding/removing fields 140 cannot be mixed with normal overriding. 141 142 The arguments are processed in the order received. A later usage can 143 reset a prior request. e.g.: 144 145 -F trace: -F comm,tid,time,ip,sym 146 147 The first -F suppresses trace events (field list is ""), but then the 148 second invocation sets the fields to comm,tid,time,ip,sym. In this case a 149 warning is given to the user: 150 151 "Overriding previous field request for all events." 152 153 Alternatively, consider the order: 154 155 -F comm,tid,time,ip,sym -F trace: 156 157 The first -F sets the fields for all events and the second -F 158 suppresses trace events. The user is given a warning message about 159 the override, and the result of the above is that only S/W and H/W 160 events are displayed with the given fields. 161 162 It's possible tp add/remove fields only for specific event type: 163 164 -Fsw:-cpu,-period 165 166 removes cpu and period from software events. 167 168 For the 'wildcard' option if a user selected field is invalid for an 169 event type, a message is displayed to the user that the option is 170 ignored for that type. For example: 171 172 $ perf script -F comm,tid,trace 173 'trace' not valid for hardware events. Ignoring. 174 'trace' not valid for software events. Ignoring. 175 176 Alternatively, if the type is given an invalid field is specified it 177 is an error. For example: 178 179 perf script -v -F sw:comm,tid,trace 180 'trace' not valid for software events. 181 182 At this point usage is displayed, and perf-script exits. 183 184 The flags field is synthesized and may have a value when Instruction 185 Trace decoding. The flags are "bcrosyiABEx" which stand for branch, 186 call, return, conditional, system, asynchronous, interrupt, 187 transaction abort, trace begin, trace end, and in transaction, 188 respectively. Known combinations of flags are printed more nicely e.g. 189 "call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b", 190 "int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs", 191 "async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB", 192 "tr end" for "bE". However the "x" flag will be display separately in those 193 cases e.g. "jcc (x)" for a condition branch within a transaction. 194 195 The callindent field is synthesized and may have a value when 196 Instruction Trace decoding. For calls and returns, it will display the 197 name of the symbol indented with spaces to reflect the stack depth. 198 199 When doing instruction trace decoding insn and insnlen give the 200 instruction bytes and the instruction length of the current 201 instruction. 202 203 The synth field is used by synthesized events which may be created when 204 Instruction Trace decoding. 205 206 Finally, a user may not set fields to none for all event types. 207 i.e., -F "" is not allowed. 208 209 The brstack output includes branch related information with raw addresses using the 210 /v/v/v/v/cycles syntax in the following order: 211 FROM: branch source instruction 212 TO : branch target instruction 213 M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported 214 X/- : X=branch inside a transactional region, -=not in transaction region or not supported 215 A/- : A=TSX abort entry, -=not aborted region or not supported 216 cycles 217 218 The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible. 219 220 When brstackinsn is specified the full assembler sequences of branch sequences for each sample 221 is printed. This is the full execution path leading to the sample. This is only supported when the 222 sample was recorded with perf record -b or -j any. 223 224 The brstackoff field will print an offset into a specific dso/binary. 225 226 With the metric option perf script can compute metrics for 227 sampling periods, similar to perf stat. This requires 228 specifying a group with multiple metrics with the :S option 229 for perf record. perf will sample on the first event, and 230 compute metrics for all the events in the group. Please note 231 that the metric computed is averaged over the whole sampling 232 period, not just for the sample point. 233 234 For sample events it's possible to display misc field with -F +misc option, 235 following letters are displayed for each bit: 236 237 PERF_RECORD_MISC_KERNEL K 238 PERF_RECORD_MISC_USER U 239 PERF_RECORD_MISC_HYPERVISOR H 240 PERF_RECORD_MISC_GUEST_KERNEL G 241 PERF_RECORD_MISC_GUEST_USER g 242 PERF_RECORD_MISC_MMAP_DATA* M 243 PERF_RECORD_MISC_COMM_EXEC E 244 PERF_RECORD_MISC_SWITCH_OUT S 245 PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp 246 247 $ perf script -F +misc ... 248 sched-messaging 1414 K 28690.636582: 4590 cycles ... 249 sched-messaging 1407 U 28690.636600: 325620 cycles ... 250 sched-messaging 1414 K 28690.636608: 19473 cycles ... 251 misc field ___________/ 252 253-k:: 254--vmlinux=<file>:: 255 vmlinux pathname 256 257--kallsyms=<file>:: 258 kallsyms pathname 259 260--symfs=<directory>:: 261 Look for files with symbols relative to this directory. 262 263-G:: 264--hide-call-graph:: 265 When printing symbols do not display call chain. 266 267--stop-bt:: 268 Stop display of callgraph at these symbols 269 270-C:: 271--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can 272 be provided as a comma-separated list with no space: 0,1. Ranges of 273 CPUs are specified with -: 0-2. Default is to report samples on all 274 CPUs. 275 276-c:: 277--comms=:: 278 Only display events for these comms. CSV that understands 279 file://filename entries. 280 281--pid=:: 282 Only show events for given process ID (comma separated list). 283 284--tid=:: 285 Only show events for given thread ID (comma separated list). 286 287-I:: 288--show-info:: 289 Display extended information about the perf.data file. This adds 290 information which may be very large and thus may clutter the display. 291 It currently includes: cpu and numa topology of the host system. 292 It can only be used with the perf script report mode. 293 294--show-kernel-path:: 295 Try to resolve the path of [kernel.kallsyms] 296 297--show-task-events 298 Display task related events (e.g. FORK, COMM, EXIT). 299 300--show-mmap-events 301 Display mmap related events (e.g. MMAP, MMAP2). 302 303--show-namespace-events 304 Display namespace events i.e. events of type PERF_RECORD_NAMESPACES. 305 306--show-switch-events 307 Display context switch events i.e. events of type PERF_RECORD_SWITCH or 308 PERF_RECORD_SWITCH_CPU_WIDE. 309 310--show-lost-events 311 Display lost events i.e. events of type PERF_RECORD_LOST. 312 313--show-round-events 314 Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND. 315 316--demangle:: 317 Demangle symbol names to human readable form. It's enabled by default, 318 disable with --no-demangle. 319 320--demangle-kernel:: 321 Demangle kernel symbol names to human readable form (for C++ kernels). 322 323--header 324 Show perf.data header. 325 326--header-only 327 Show only perf.data header. 328 329--itrace:: 330 Options for decoding instruction tracing data. The options are: 331 332include::itrace.txt[] 333 334 To disable decoding entirely, use --no-itrace. 335 336--full-source-path:: 337 Show the full path for source files for srcline output. 338 339--max-stack:: 340 Set the stack depth limit when parsing the callchain, anything 341 beyond the specified depth will be ignored. This is a trade-off 342 between information loss and faster processing especially for 343 workloads that can have a very long callchain stack. 344 Note that when using the --itrace option the synthesized callchain size 345 will override this value if the synthesized callchain size is bigger. 346 347 Default: 127 348 349--ns:: 350 Use 9 decimal places when displaying time (i.e. show the nanoseconds) 351 352-f:: 353--force:: 354 Don't do ownership validation. 355 356--time:: 357 Only analyze samples within given time window: <start>,<stop>. Times 358 have the format seconds.microseconds. If start is not given (i.e., time 359 string is ',x.y') then analysis starts at the beginning of the file. If 360 stop time is not given (i.e, time string is 'x.y,') then analysis goes 361 to end of file. 362 363 Also support time percent with multipe time range. Time string is 364 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'. 365 366 For example: 367 Select the second 10% time slice: 368 perf script --time 10%/2 369 370 Select from 0% to 10% time slice: 371 perf script --time 0%-10% 372 373 Select the first and second 10% time slices: 374 perf script --time 10%/1,10%/2 375 376 Select from 0% to 10% and 30% to 40% slices: 377 perf script --time 0%-10%,30%-40% 378 379--max-blocks:: 380 Set the maximum number of program blocks to print with brstackasm for 381 each sample. 382 383--reltime:: 384 Print time stamps relative to trace start. 385 386--per-event-dump:: 387 Create per event files with a "perf.data.EVENT.dump" name instead of 388 printing to stdout, useful, for instance, for generating flamegraphs. 389 390--inline:: 391 If a callgraph address belongs to an inlined function, the inline stack 392 will be printed. Each entry has function name and file/line. Enabled by 393 default, disable with --no-inline. 394 395--insn-trace:: 396 Show instruction stream for intel_pt traces. Combine with --xed to 397 show disassembly. 398 399--xed:: 400 Run xed disassembler on output. Requires installing the xed disassembler. 401 402--call-trace:: 403 Show call stream for intel_pt traces. The CPUs are interleaved, but 404 can be filtered with -C. 405 406--call-ret-trace:: 407 Show call and return stream for intel_pt traces. 408 409--graph-function:: 410 For itrace only show specified functions and their callees for 411 itrace. Multiple functions can be separated by comma. 412 413SEE ALSO 414-------- 415linkperf:perf-record[1], linkperf:perf-script-perl[1], 416linkperf:perf-script-python[1] 417