1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * gpio-event-mon - monitor GPIO line events from userspace 4 * 5 * Copyright (C) 2016 Linus Walleij 6 * 7 * Usage: 8 * gpio-event-mon -n <device-name> -o <offset> 9 */ 10 11 #include <unistd.h> 12 #include <stdlib.h> 13 #include <stdbool.h> 14 #include <stdint.h> 15 #include <stdio.h> 16 #include <dirent.h> 17 #include <errno.h> 18 #include <string.h> 19 #include <poll.h> 20 #include <fcntl.h> 21 #include <getopt.h> 22 #include <inttypes.h> 23 #include <sys/ioctl.h> 24 #include <sys/types.h> 25 #include <linux/gpio.h> 26 #include "gpio-utils.h" 27 28 int monitor_device(const char *device_name, 29 unsigned int *lines, 30 unsigned int num_lines, 31 struct gpio_v2_line_config *config, 32 unsigned int loops) 33 { 34 struct gpio_v2_line_values values; 35 char *chrdev_name; 36 int cfd, lfd; 37 int ret; 38 int i = 0; 39 40 ret = asprintf(&chrdev_name, "/dev/%s", device_name); 41 if (ret < 0) 42 return -ENOMEM; 43 44 cfd = open(chrdev_name, 0); 45 if (cfd == -1) { 46 ret = -errno; 47 fprintf(stderr, "Failed to open %s\n", chrdev_name); 48 goto exit_free_name; 49 } 50 51 ret = gpiotools_request_line(device_name, lines, num_lines, config, 52 "gpio-event-mon"); 53 if (ret < 0) 54 goto exit_device_close; 55 else 56 lfd = ret; 57 58 /* Read initial states */ 59 values.mask = 0; 60 values.bits = 0; 61 for (i = 0; i < num_lines; i++) 62 gpiotools_set_bit(&values.mask, i); 63 ret = gpiotools_get_values(lfd, &values); 64 if (ret < 0) { 65 fprintf(stderr, 66 "Failed to issue GPIO LINE GET VALUES IOCTL (%d)\n", 67 ret); 68 goto exit_line_close; 69 } 70 71 if (num_lines == 1) { 72 fprintf(stdout, "Monitoring line %d on %s\n", lines[0], device_name); 73 fprintf(stdout, "Initial line value: %d\n", 74 gpiotools_test_bit(values.bits, 0)); 75 } else { 76 fprintf(stdout, "Monitoring lines %d", lines[0]); 77 for (i = 1; i < num_lines - 1; i++) 78 fprintf(stdout, ", %d", lines[i]); 79 fprintf(stdout, " and %d on %s\n", lines[i], device_name); 80 fprintf(stdout, "Initial line values: %d", 81 gpiotools_test_bit(values.bits, 0)); 82 for (i = 1; i < num_lines - 1; i++) 83 fprintf(stdout, ", %d", 84 gpiotools_test_bit(values.bits, i)); 85 fprintf(stdout, " and %d\n", 86 gpiotools_test_bit(values.bits, i)); 87 } 88 89 while (1) { 90 struct gpio_v2_line_event event; 91 92 ret = read(lfd, &event, sizeof(event)); 93 if (ret == -1) { 94 if (errno == -EAGAIN) { 95 fprintf(stderr, "nothing available\n"); 96 continue; 97 } else { 98 ret = -errno; 99 fprintf(stderr, "Failed to read event (%d)\n", 100 ret); 101 break; 102 } 103 } 104 105 if (ret != sizeof(event)) { 106 fprintf(stderr, "Reading event failed\n"); 107 ret = -EIO; 108 break; 109 } 110 fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ", 111 event.timestamp_ns, event.offset, event.line_seqno, 112 event.seqno); 113 switch (event.id) { 114 case GPIO_V2_LINE_EVENT_RISING_EDGE: 115 fprintf(stdout, "rising edge"); 116 break; 117 case GPIO_V2_LINE_EVENT_FALLING_EDGE: 118 fprintf(stdout, "falling edge"); 119 break; 120 default: 121 fprintf(stdout, "unknown event"); 122 } 123 fprintf(stdout, "\n"); 124 125 i++; 126 if (i == loops) 127 break; 128 } 129 130 exit_line_close: 131 if (close(lfd) == -1) 132 perror("Failed to close line file"); 133 exit_device_close: 134 if (close(cfd) == -1) 135 perror("Failed to close GPIO character device file"); 136 exit_free_name: 137 free(chrdev_name); 138 return ret; 139 } 140 141 void print_usage(void) 142 { 143 fprintf(stderr, "Usage: gpio-event-mon [options]...\n" 144 "Listen to events on GPIO lines, 0->1 1->0\n" 145 " -n <name> Listen on GPIOs on a named device (must be stated)\n" 146 " -o <n> Offset of line to monitor (may be repeated)\n" 147 " -d Set line as open drain\n" 148 " -s Set line as open source\n" 149 " -r Listen for rising edges\n" 150 " -f Listen for falling edges\n" 151 " -b <n> Debounce the line with period n microseconds\n" 152 " [-c <n>] Do <n> loops (optional, infinite loop if not stated)\n" 153 " -? This helptext\n" 154 "\n" 155 "Example:\n" 156 "gpio-event-mon -n gpiochip0 -o 4 -r -f -b 10000\n" 157 ); 158 } 159 160 #define EDGE_FLAGS \ 161 (GPIO_V2_LINE_FLAG_EDGE_RISING | \ 162 GPIO_V2_LINE_FLAG_EDGE_FALLING) 163 164 int main(int argc, char **argv) 165 { 166 const char *device_name = NULL; 167 unsigned int lines[GPIO_V2_LINES_MAX]; 168 unsigned int num_lines = 0; 169 unsigned int loops = 0; 170 struct gpio_v2_line_config config; 171 int c, attr, i; 172 unsigned long debounce_period_us = 0; 173 174 memset(&config, 0, sizeof(config)); 175 config.flags = GPIO_V2_LINE_FLAG_INPUT; 176 while ((c = getopt(argc, argv, "c:n:o:b:dsrf?")) != -1) { 177 switch (c) { 178 case 'c': 179 loops = strtoul(optarg, NULL, 10); 180 break; 181 case 'n': 182 device_name = optarg; 183 break; 184 case 'o': 185 if (num_lines >= GPIO_V2_LINES_MAX) { 186 print_usage(); 187 return -1; 188 } 189 lines[num_lines] = strtoul(optarg, NULL, 10); 190 num_lines++; 191 break; 192 case 'b': 193 debounce_period_us = strtoul(optarg, NULL, 10); 194 break; 195 case 'd': 196 config.flags |= GPIO_V2_LINE_FLAG_OPEN_DRAIN; 197 break; 198 case 's': 199 config.flags |= GPIO_V2_LINE_FLAG_OPEN_SOURCE; 200 break; 201 case 'r': 202 config.flags |= GPIO_V2_LINE_FLAG_EDGE_RISING; 203 break; 204 case 'f': 205 config.flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING; 206 break; 207 case '?': 208 print_usage(); 209 return -1; 210 } 211 } 212 213 if (debounce_period_us) { 214 attr = config.num_attrs; 215 config.num_attrs++; 216 for (i = 0; i < num_lines; i++) 217 gpiotools_set_bit(&config.attrs[attr].mask, i); 218 config.attrs[attr].attr.id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE; 219 config.attrs[attr].attr.debounce_period_us = debounce_period_us; 220 } 221 222 if (!device_name || num_lines == 0) { 223 print_usage(); 224 return -1; 225 } 226 if (!(config.flags & EDGE_FLAGS)) { 227 printf("No flags specified, listening on both rising and " 228 "falling edges\n"); 229 config.flags |= EDGE_FLAGS; 230 } 231 return monitor_device(device_name, lines, num_lines, &config, loops); 232 } 233