1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * usbusx2y.c - ALSA USB US-428 Driver 4 * 5 2005-04-14 Karsten Wiese 6 Version 0.8.7.2: 7 Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom. 8 Tested ok with kernel 2.6.12-rc2. 9 10 2004-12-14 Karsten Wiese 11 Version 0.8.7.1: 12 snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open. 13 14 2004-12-02 Karsten Wiese 15 Version 0.8.7: 16 Use macro usb_maxpacket() for portability. 17 18 2004-10-26 Karsten Wiese 19 Version 0.8.6: 20 wake_up() process waiting in usx2y_urbs_start() on error. 21 22 2004-10-21 Karsten Wiese 23 Version 0.8.5: 24 nrpacks is runtime or compiletime configurable now with tested values from 1 to 4. 25 26 2004-10-03 Karsten Wiese 27 Version 0.8.2: 28 Avoid any possible racing while in prepare callback. 29 30 2004-09-30 Karsten Wiese 31 Version 0.8.0: 32 Simplified things and made ohci work again. 33 34 2004-09-20 Karsten Wiese 35 Version 0.7.3: 36 Use usb_kill_urb() instead of deprecated (kernel 2.6.9) usb_unlink_urb(). 37 38 2004-07-13 Karsten Wiese 39 Version 0.7.1: 40 Don't sleep in START/STOP callbacks anymore. 41 us428 channels C/D not handled just for this version, sorry. 42 43 2004-06-21 Karsten Wiese 44 Version 0.6.4: 45 Temporarely suspend midi input 46 to sanely call usb_set_interface() when setting format. 47 48 2004-06-12 Karsten Wiese 49 Version 0.6.3: 50 Made it thus the following rule is enforced: 51 "All pcm substreams of one usx2y have to operate at the same rate & format." 52 53 2004-04-06 Karsten Wiese 54 Version 0.6.0: 55 Runs on 2.6.5 kernel without any "--with-debug=" things. 56 us224 reported running. 57 58 2004-01-14 Karsten Wiese 59 Version 0.5.1: 60 Runs with 2.6.1 kernel. 61 62 2003-12-30 Karsten Wiese 63 Version 0.4.1: 64 Fix 24Bit 4Channel capturing for the us428. 65 66 2003-11-27 Karsten Wiese, Martin Langer 67 Version 0.4: 68 us122 support. 69 us224 could be tested by uncommenting the sections containing USB_ID_US224 70 71 2003-11-03 Karsten Wiese 72 Version 0.3: 73 24Bit support. 74 "arecord -D hw:1 -c 2 -r 48000 -M -f S24_3LE|aplay -D hw:1 -c 2 -r 48000 -M -f S24_3LE" works. 75 76 2003-08-22 Karsten Wiese 77 Version 0.0.8: 78 Removed EZUSB Firmware. First Stage Firmwaredownload is now done by tascam-firmware downloader. 79 See: 80 http://usb-midi-fw.sourceforge.net/tascam-firmware.tar.gz 81 82 2003-06-18 Karsten Wiese 83 Version 0.0.5: 84 changed to compile with kernel 2.4.21 and alsa 0.9.4 85 86 2002-10-16 Karsten Wiese 87 Version 0.0.4: 88 compiles again with alsa-current. 89 USB_ISO_ASAP not used anymore (most of the time), instead 90 urb->start_frame is calculated here now, some calls inside usb-driver don't need to happen anymore. 91 92 To get the best out of this: 93 Disable APM-support in the kernel as APM-BIOS calls (once each second) hard disable interrupt for many precious milliseconds. 94 This helped me much on my slowish PII 400 & PIII 500. 95 ACPI yet untested but might cause the same bad behaviour. 96 Use a kernel with lowlatency and preemptiv patches applied. 97 To autoload snd-usb-midi append a line 98 post-install snd-usb-us428 modprobe snd-usb-midi 99 to /etc/modules.conf. 100 101 known problems: 102 sliders, knobs, lights not yet handled except MASTER Volume slider. 103 "pcm -c 2" doesn't work. "pcm -c 2 -m direct_interleaved" does. 104 KDE3: "Enable full duplex operation" deadlocks. 105 106 2002-08-31 Karsten Wiese 107 Version 0.0.3: audio also simplex; 108 simplifying: iso urbs only 1 packet, melted structs. 109 ASYNC_UNLINK not used anymore: no more crashes so far..... 110 for alsa 0.9 rc3. 111 112 2002-08-09 Karsten Wiese 113 Version 0.0.2: midi works with snd-usb-midi, audio (only fullduplex now) with i.e. bristol. 114 The firmware has been sniffed from win2k us-428 driver 3.09. 115 116 * Copyright (c) 2002 - 2004 Karsten Wiese 117 */ 118 119 #include <linux/init.h> 120 #include <linux/module.h> 121 #include <linux/moduleparam.h> 122 #include <linux/slab.h> 123 #include <linux/interrupt.h> 124 #include <linux/usb.h> 125 #include <sound/core.h> 126 #include <sound/initval.h> 127 #include <sound/pcm.h> 128 129 #include <sound/rawmidi.h> 130 #include "usx2y.h" 131 #include "usbusx2y.h" 132 #include "usX2Yhwdep.h" 133 134 MODULE_AUTHOR("Karsten Wiese <annabellesgarden@yahoo.de>"); 135 MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2"); 136 MODULE_LICENSE("GPL"); 137 138 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ 139 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ 140 static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ 141 142 module_param_array(index, int, NULL, 0444); 143 MODULE_PARM_DESC(index, "Index value for "NAME_ALLCAPS"."); 144 module_param_array(id, charp, NULL, 0444); 145 MODULE_PARM_DESC(id, "ID string for "NAME_ALLCAPS"."); 146 module_param_array(enable, bool, NULL, 0444); 147 MODULE_PARM_DESC(enable, "Enable "NAME_ALLCAPS"."); 148 149 static int snd_usx2y_card_used[SNDRV_CARDS]; 150 151 static void snd_usx2y_card_private_free(struct snd_card *card); 152 static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s); 153 154 /* 155 * pipe 4 is used for switching the lamps, setting samplerate, volumes .... 156 */ 157 static void i_usx2y_out04_int(struct urb *urb) 158 { 159 #ifdef CONFIG_SND_DEBUG 160 if (urb->status) { 161 int i; 162 struct usx2ydev *usx2y = urb->context; 163 164 for (i = 0; i < 10 && usx2y->as04.urb[i] != urb; i++) 165 ; 166 snd_printdd("%s urb %i status=%i\n", __func__, i, urb->status); 167 } 168 #endif 169 } 170 171 static void i_usx2y_in04_int(struct urb *urb) 172 { 173 int err = 0; 174 struct usx2ydev *usx2y = urb->context; 175 struct us428ctls_sharedmem *us428ctls = usx2y->us428ctls_sharedmem; 176 struct us428_p4out *p4out; 177 int i, j, n, diff, send; 178 179 usx2y->in04_int_calls++; 180 181 if (urb->status) { 182 snd_printdd("Interrupt Pipe 4 came back with status=%i\n", urb->status); 183 return; 184 } 185 186 // printk("%i:0x%02X ", 8, (int)((unsigned char*)usx2y->in04_buf)[8]); Master volume shows 0 here if fader is at max during boot ?!? 187 if (us428ctls) { 188 diff = -1; 189 if (us428ctls->ctl_snapshot_last == -2) { 190 diff = 0; 191 memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); 192 us428ctls->ctl_snapshot_last = -1; 193 } else { 194 for (i = 0; i < 21; i++) { 195 if (usx2y->in04_last[i] != ((char *)usx2y->in04_buf)[i]) { 196 if (diff < 0) 197 diff = i; 198 usx2y->in04_last[i] = ((char *)usx2y->in04_buf)[i]; 199 } 200 } 201 } 202 if (diff >= 0) { 203 n = us428ctls->ctl_snapshot_last + 1; 204 if (n >= N_US428_CTL_BUFS || n < 0) 205 n = 0; 206 memcpy(us428ctls->ctl_snapshot + n, usx2y->in04_buf, sizeof(us428ctls->ctl_snapshot[0])); 207 us428ctls->ctl_snapshot_differs_at[n] = diff; 208 us428ctls->ctl_snapshot_last = n; 209 wake_up(&usx2y->us428ctls_wait_queue_head); 210 } 211 } 212 213 if (usx2y->us04) { 214 if (!usx2y->us04->submitted) { 215 do { 216 err = usb_submit_urb(usx2y->us04->urb[usx2y->us04->submitted++], GFP_ATOMIC); 217 } while (!err && usx2y->us04->submitted < usx2y->us04->len); 218 } 219 } else { 220 if (us428ctls && us428ctls->p4out_last >= 0 && us428ctls->p4out_last < N_US428_P4OUT_BUFS) { 221 if (us428ctls->p4out_last != us428ctls->p4out_sent) { 222 send = us428ctls->p4out_sent + 1; 223 if (send >= N_US428_P4OUT_BUFS) 224 send = 0; 225 for (j = 0; j < URBS_ASYNC_SEQ && !err; ++j) { 226 if (!usx2y->as04.urb[j]->status) { 227 p4out = us428ctls->p4out + send; // FIXME if more than 1 p4out is new, 1 gets lost. 228 usb_fill_bulk_urb(usx2y->as04.urb[j], usx2y->dev, 229 usb_sndbulkpipe(usx2y->dev, 0x04), &p4out->val.vol, 230 p4out->type == ELT_LIGHT ? sizeof(struct us428_lights) : 5, 231 i_usx2y_out04_int, usx2y); 232 err = usb_submit_urb(usx2y->as04.urb[j], GFP_ATOMIC); 233 us428ctls->p4out_sent = send; 234 break; 235 } 236 } 237 } 238 } 239 } 240 241 if (err) 242 snd_printk(KERN_ERR "in04_int() usb_submit_urb err=%i\n", err); 243 244 urb->dev = usx2y->dev; 245 usb_submit_urb(urb, GFP_ATOMIC); 246 } 247 248 /* 249 * Prepare some urbs 250 */ 251 int usx2y_async_seq04_init(struct usx2ydev *usx2y) 252 { 253 int err = 0, i; 254 255 if (WARN_ON(usx2y->as04.buffer)) 256 return -EBUSY; 257 258 usx2y->as04.buffer = kmalloc_array(URBS_ASYNC_SEQ, 259 URB_DATA_LEN_ASYNC_SEQ, GFP_KERNEL); 260 if (!usx2y->as04.buffer) { 261 err = -ENOMEM; 262 } else { 263 for (i = 0; i < URBS_ASYNC_SEQ; ++i) { 264 usx2y->as04.urb[i] = usb_alloc_urb(0, GFP_KERNEL); 265 if (!usx2y->as04.urb[i]) { 266 err = -ENOMEM; 267 break; 268 } 269 usb_fill_bulk_urb(usx2y->as04.urb[i], usx2y->dev, 270 usb_sndbulkpipe(usx2y->dev, 0x04), 271 usx2y->as04.buffer + URB_DATA_LEN_ASYNC_SEQ * i, 0, 272 i_usx2y_out04_int, usx2y); 273 err = usb_urb_ep_type_check(usx2y->as04.urb[i]); 274 if (err < 0) 275 break; 276 } 277 } 278 if (err) 279 usx2y_unlinkseq(&usx2y->as04); 280 return err; 281 } 282 283 int usx2y_in04_init(struct usx2ydev *usx2y) 284 { 285 int err; 286 287 if (WARN_ON(usx2y->in04_urb)) 288 return -EBUSY; 289 290 usx2y->in04_urb = usb_alloc_urb(0, GFP_KERNEL); 291 if (!usx2y->in04_urb) { 292 err = -ENOMEM; 293 goto error; 294 } 295 296 usx2y->in04_buf = kmalloc(21, GFP_KERNEL); 297 if (!usx2y->in04_buf) { 298 err = -ENOMEM; 299 goto error; 300 } 301 302 init_waitqueue_head(&usx2y->in04_wait_queue); 303 usb_fill_int_urb(usx2y->in04_urb, usx2y->dev, usb_rcvintpipe(usx2y->dev, 0x4), 304 usx2y->in04_buf, 21, 305 i_usx2y_in04_int, usx2y, 306 10); 307 if (usb_urb_ep_type_check(usx2y->in04_urb)) { 308 err = -EINVAL; 309 goto error; 310 } 311 return usb_submit_urb(usx2y->in04_urb, GFP_KERNEL); 312 313 error: 314 kfree(usx2y->in04_buf); 315 usb_free_urb(usx2y->in04_urb); 316 usx2y->in04_buf = NULL; 317 usx2y->in04_urb = NULL; 318 return err; 319 } 320 321 static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s) 322 { 323 int i; 324 325 for (i = 0; i < URBS_ASYNC_SEQ; ++i) { 326 if (!s->urb[i]) 327 continue; 328 usb_kill_urb(s->urb[i]); 329 usb_free_urb(s->urb[i]); 330 s->urb[i] = NULL; 331 } 332 kfree(s->buffer); 333 s->buffer = NULL; 334 } 335 336 static const struct usb_device_id snd_usx2y_usb_id_table[] = { 337 { 338 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, 339 .idVendor = 0x1604, 340 .idProduct = USB_ID_US428 341 }, 342 { 343 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, 344 .idVendor = 0x1604, 345 .idProduct = USB_ID_US122 346 }, 347 { 348 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, 349 .idVendor = 0x1604, 350 .idProduct = USB_ID_US224 351 }, 352 { /* terminator */ } 353 }; 354 MODULE_DEVICE_TABLE(usb, snd_usx2y_usb_id_table); 355 356 static int usx2y_create_card(struct usb_device *device, 357 struct usb_interface *intf, 358 struct snd_card **cardp) 359 { 360 int dev; 361 struct snd_card *card; 362 int err; 363 364 for (dev = 0; dev < SNDRV_CARDS; ++dev) 365 if (enable[dev] && !snd_usx2y_card_used[dev]) 366 break; 367 if (dev >= SNDRV_CARDS) 368 return -ENODEV; 369 err = snd_card_new(&intf->dev, index[dev], id[dev], THIS_MODULE, 370 sizeof(struct usx2ydev), &card); 371 if (err < 0) 372 return err; 373 snd_usx2y_card_used[usx2y(card)->card_index = dev] = 1; 374 card->private_free = snd_usx2y_card_private_free; 375 usx2y(card)->dev = device; 376 init_waitqueue_head(&usx2y(card)->prepare_wait_queue); 377 init_waitqueue_head(&usx2y(card)->us428ctls_wait_queue_head); 378 mutex_init(&usx2y(card)->pcm_mutex); 379 INIT_LIST_HEAD(&usx2y(card)->midi_list); 380 strcpy(card->driver, "USB "NAME_ALLCAPS""); 381 sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); 382 sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)", 383 card->shortname, 384 le16_to_cpu(device->descriptor.idVendor), 385 le16_to_cpu(device->descriptor.idProduct), 386 0,//us428(card)->usbmidi.ifnum, 387 usx2y(card)->dev->bus->busnum, usx2y(card)->dev->devnum); 388 *cardp = card; 389 return 0; 390 } 391 392 static void snd_usx2y_card_private_free(struct snd_card *card) 393 { 394 struct usx2ydev *usx2y = usx2y(card); 395 396 kfree(usx2y->in04_buf); 397 usb_free_urb(usx2y->in04_urb); 398 if (usx2y->us428ctls_sharedmem) 399 free_pages_exact(usx2y->us428ctls_sharedmem, 400 US428_SHAREDMEM_PAGES); 401 if (usx2y->card_index >= 0 && usx2y->card_index < SNDRV_CARDS) 402 snd_usx2y_card_used[usx2y->card_index] = 0; 403 } 404 405 static void snd_usx2y_disconnect(struct usb_interface *intf) 406 { 407 struct snd_card *card; 408 struct usx2ydev *usx2y; 409 struct list_head *p; 410 411 card = usb_get_intfdata(intf); 412 if (!card) 413 return; 414 usx2y = usx2y(card); 415 usx2y->chip_status = USX2Y_STAT_CHIP_HUP; 416 usx2y_unlinkseq(&usx2y->as04); 417 usb_kill_urb(usx2y->in04_urb); 418 snd_card_disconnect(card); 419 420 /* release the midi resources */ 421 list_for_each(p, &usx2y->midi_list) { 422 snd_usbmidi_disconnect(p); 423 } 424 if (usx2y->us428ctls_sharedmem) 425 wake_up(&usx2y->us428ctls_wait_queue_head); 426 snd_card_free(card); 427 } 428 429 static int snd_usx2y_probe(struct usb_interface *intf, 430 const struct usb_device_id *id) 431 { 432 struct usb_device *device = interface_to_usbdev(intf); 433 struct snd_card *card; 434 int err; 435 436 if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 || 437 (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 && 438 le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 && 439 le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428)) 440 return -EINVAL; 441 442 err = usx2y_create_card(device, intf, &card); 443 if (err < 0) 444 return err; 445 err = usx2y_hwdep_new(card, device); 446 if (err < 0) 447 goto error; 448 err = snd_card_register(card); 449 if (err < 0) 450 goto error; 451 452 dev_set_drvdata(&intf->dev, card); 453 return 0; 454 455 error: 456 snd_card_free(card); 457 return err; 458 } 459 460 static struct usb_driver snd_usx2y_usb_driver = { 461 .name = "snd-usb-usx2y", 462 .probe = snd_usx2y_probe, 463 .disconnect = snd_usx2y_disconnect, 464 .id_table = snd_usx2y_usb_id_table, 465 }; 466 module_usb_driver(snd_usx2y_usb_driver); 467