1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 */ 4 5 #include <linux/init.h> 6 #include <linux/slab.h> 7 #include <linux/usb.h> 8 #include <linux/usb/audio.h> 9 #include <linux/usb/midi.h> 10 #include <linux/bits.h> 11 12 #include <sound/control.h> 13 #include <sound/core.h> 14 #include <sound/info.h> 15 #include <sound/pcm.h> 16 17 #include "usbaudio.h" 18 #include "card.h" 19 #include "mixer.h" 20 #include "mixer_quirks.h" 21 #include "midi.h" 22 #include "quirks.h" 23 #include "helper.h" 24 #include "endpoint.h" 25 #include "pcm.h" 26 #include "clock.h" 27 #include "stream.h" 28 29 /* 30 * handle the quirks for the contained interfaces 31 */ 32 static int create_composite_quirk(struct snd_usb_audio *chip, 33 struct usb_interface *iface, 34 struct usb_driver *driver, 35 const struct snd_usb_audio_quirk *quirk_comp) 36 { 37 int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; 38 const struct snd_usb_audio_quirk *quirk; 39 int err; 40 41 for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { 42 iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); 43 if (!iface) 44 continue; 45 if (quirk->ifnum != probed_ifnum && 46 usb_interface_claimed(iface)) 47 continue; 48 err = snd_usb_create_quirk(chip, iface, driver, quirk); 49 if (err < 0) 50 return err; 51 } 52 53 for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { 54 iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); 55 if (!iface) 56 continue; 57 if (quirk->ifnum != probed_ifnum && 58 !usb_interface_claimed(iface)) 59 usb_driver_claim_interface(driver, iface, (void *)-1L); 60 } 61 62 return 0; 63 } 64 65 static int ignore_interface_quirk(struct snd_usb_audio *chip, 66 struct usb_interface *iface, 67 struct usb_driver *driver, 68 const struct snd_usb_audio_quirk *quirk) 69 { 70 return 0; 71 } 72 73 74 /* 75 * Allow alignment on audio sub-slot (channel samples) rather than 76 * on audio slots (audio frames) 77 */ 78 static int create_align_transfer_quirk(struct snd_usb_audio *chip, 79 struct usb_interface *iface, 80 struct usb_driver *driver, 81 const struct snd_usb_audio_quirk *quirk) 82 { 83 chip->txfr_quirk = 1; 84 return 1; /* Continue with creating streams and mixer */ 85 } 86 87 static int create_any_midi_quirk(struct snd_usb_audio *chip, 88 struct usb_interface *intf, 89 struct usb_driver *driver, 90 const struct snd_usb_audio_quirk *quirk) 91 { 92 return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); 93 } 94 95 /* 96 * create a stream for an interface with proper descriptors 97 */ 98 static int create_standard_audio_quirk(struct snd_usb_audio *chip, 99 struct usb_interface *iface, 100 struct usb_driver *driver, 101 const struct snd_usb_audio_quirk *quirk) 102 { 103 struct usb_host_interface *alts; 104 struct usb_interface_descriptor *altsd; 105 int err; 106 107 if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */ 108 chip->tx_length_quirk = 1; 109 110 alts = &iface->altsetting[0]; 111 altsd = get_iface_desc(alts); 112 err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber); 113 if (err < 0) { 114 usb_audio_err(chip, "cannot setup if %d: error %d\n", 115 altsd->bInterfaceNumber, err); 116 return err; 117 } 118 /* reset the current interface */ 119 usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); 120 return 0; 121 } 122 123 /* 124 * create a stream for an endpoint/altsetting without proper descriptors 125 */ 126 static int create_fixed_stream_quirk(struct snd_usb_audio *chip, 127 struct usb_interface *iface, 128 struct usb_driver *driver, 129 const struct snd_usb_audio_quirk *quirk) 130 { 131 struct audioformat *fp; 132 struct usb_host_interface *alts; 133 struct usb_interface_descriptor *altsd; 134 int stream, err; 135 unsigned *rate_table = NULL; 136 137 fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); 138 if (!fp) 139 return -ENOMEM; 140 141 INIT_LIST_HEAD(&fp->list); 142 if (fp->nr_rates > MAX_NR_RATES) { 143 kfree(fp); 144 return -EINVAL; 145 } 146 if (fp->nr_rates > 0) { 147 rate_table = kmemdup(fp->rate_table, 148 sizeof(int) * fp->nr_rates, GFP_KERNEL); 149 if (!rate_table) { 150 kfree(fp); 151 return -ENOMEM; 152 } 153 fp->rate_table = rate_table; 154 } 155 156 stream = (fp->endpoint & USB_DIR_IN) 157 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; 158 err = snd_usb_add_audio_stream(chip, stream, fp); 159 if (err < 0) 160 goto error; 161 if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || 162 fp->altset_idx >= iface->num_altsetting) { 163 err = -EINVAL; 164 goto error; 165 } 166 alts = &iface->altsetting[fp->altset_idx]; 167 altsd = get_iface_desc(alts); 168 if (altsd->bNumEndpoints < 1) { 169 err = -EINVAL; 170 goto error; 171 } 172 173 fp->protocol = altsd->bInterfaceProtocol; 174 175 if (fp->datainterval == 0) 176 fp->datainterval = snd_usb_parse_datainterval(chip, alts); 177 if (fp->maxpacksize == 0) 178 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); 179 usb_set_interface(chip->dev, fp->iface, 0); 180 snd_usb_init_pitch(chip, fp->iface, alts, fp); 181 snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); 182 return 0; 183 184 error: 185 list_del(&fp->list); /* unlink for avoiding double-free */ 186 kfree(fp); 187 kfree(rate_table); 188 return err; 189 } 190 191 static int create_auto_pcm_quirk(struct snd_usb_audio *chip, 192 struct usb_interface *iface, 193 struct usb_driver *driver) 194 { 195 struct usb_host_interface *alts; 196 struct usb_interface_descriptor *altsd; 197 struct usb_endpoint_descriptor *epd; 198 struct uac1_as_header_descriptor *ashd; 199 struct uac_format_type_i_discrete_descriptor *fmtd; 200 201 /* 202 * Most Roland/Yamaha audio streaming interfaces have more or less 203 * standard descriptors, but older devices might lack descriptors, and 204 * future ones might change, so ensure that we fail silently if the 205 * interface doesn't look exactly right. 206 */ 207 208 /* must have a non-zero altsetting for streaming */ 209 if (iface->num_altsetting < 2) 210 return -ENODEV; 211 alts = &iface->altsetting[1]; 212 altsd = get_iface_desc(alts); 213 214 /* must have an isochronous endpoint for streaming */ 215 if (altsd->bNumEndpoints < 1) 216 return -ENODEV; 217 epd = get_endpoint(alts, 0); 218 if (!usb_endpoint_xfer_isoc(epd)) 219 return -ENODEV; 220 221 /* must have format descriptors */ 222 ashd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, 223 UAC_AS_GENERAL); 224 fmtd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, 225 UAC_FORMAT_TYPE); 226 if (!ashd || ashd->bLength < 7 || 227 !fmtd || fmtd->bLength < 8) 228 return -ENODEV; 229 230 return create_standard_audio_quirk(chip, iface, driver, NULL); 231 } 232 233 static int create_yamaha_midi_quirk(struct snd_usb_audio *chip, 234 struct usb_interface *iface, 235 struct usb_driver *driver, 236 struct usb_host_interface *alts) 237 { 238 static const struct snd_usb_audio_quirk yamaha_midi_quirk = { 239 .type = QUIRK_MIDI_YAMAHA 240 }; 241 struct usb_midi_in_jack_descriptor *injd; 242 struct usb_midi_out_jack_descriptor *outjd; 243 244 /* must have some valid jack descriptors */ 245 injd = snd_usb_find_csint_desc(alts->extra, alts->extralen, 246 NULL, USB_MS_MIDI_IN_JACK); 247 outjd = snd_usb_find_csint_desc(alts->extra, alts->extralen, 248 NULL, USB_MS_MIDI_OUT_JACK); 249 if (!injd && !outjd) 250 return -ENODEV; 251 if ((injd && !snd_usb_validate_midi_desc(injd)) || 252 (outjd && !snd_usb_validate_midi_desc(outjd))) 253 return -ENODEV; 254 if (injd && (injd->bLength < 5 || 255 (injd->bJackType != USB_MS_EMBEDDED && 256 injd->bJackType != USB_MS_EXTERNAL))) 257 return -ENODEV; 258 if (outjd && (outjd->bLength < 6 || 259 (outjd->bJackType != USB_MS_EMBEDDED && 260 outjd->bJackType != USB_MS_EXTERNAL))) 261 return -ENODEV; 262 return create_any_midi_quirk(chip, iface, driver, &yamaha_midi_quirk); 263 } 264 265 static int create_roland_midi_quirk(struct snd_usb_audio *chip, 266 struct usb_interface *iface, 267 struct usb_driver *driver, 268 struct usb_host_interface *alts) 269 { 270 static const struct snd_usb_audio_quirk roland_midi_quirk = { 271 .type = QUIRK_MIDI_ROLAND 272 }; 273 u8 *roland_desc = NULL; 274 275 /* might have a vendor-specific descriptor <06 24 F1 02 ...> */ 276 for (;;) { 277 roland_desc = snd_usb_find_csint_desc(alts->extra, 278 alts->extralen, 279 roland_desc, 0xf1); 280 if (!roland_desc) 281 return -ENODEV; 282 if (roland_desc[0] < 6 || roland_desc[3] != 2) 283 continue; 284 return create_any_midi_quirk(chip, iface, driver, 285 &roland_midi_quirk); 286 } 287 } 288 289 static int create_std_midi_quirk(struct snd_usb_audio *chip, 290 struct usb_interface *iface, 291 struct usb_driver *driver, 292 struct usb_host_interface *alts) 293 { 294 struct usb_ms_header_descriptor *mshd; 295 struct usb_ms_endpoint_descriptor *msepd; 296 297 /* must have the MIDIStreaming interface header descriptor*/ 298 mshd = (struct usb_ms_header_descriptor *)alts->extra; 299 if (alts->extralen < 7 || 300 mshd->bLength < 7 || 301 mshd->bDescriptorType != USB_DT_CS_INTERFACE || 302 mshd->bDescriptorSubtype != USB_MS_HEADER) 303 return -ENODEV; 304 /* must have the MIDIStreaming endpoint descriptor*/ 305 msepd = (struct usb_ms_endpoint_descriptor *)alts->endpoint[0].extra; 306 if (alts->endpoint[0].extralen < 4 || 307 msepd->bLength < 4 || 308 msepd->bDescriptorType != USB_DT_CS_ENDPOINT || 309 msepd->bDescriptorSubtype != UAC_MS_GENERAL || 310 msepd->bNumEmbMIDIJack < 1 || 311 msepd->bNumEmbMIDIJack > 16) 312 return -ENODEV; 313 314 return create_any_midi_quirk(chip, iface, driver, NULL); 315 } 316 317 static int create_auto_midi_quirk(struct snd_usb_audio *chip, 318 struct usb_interface *iface, 319 struct usb_driver *driver) 320 { 321 struct usb_host_interface *alts; 322 struct usb_interface_descriptor *altsd; 323 struct usb_endpoint_descriptor *epd; 324 int err; 325 326 alts = &iface->altsetting[0]; 327 altsd = get_iface_desc(alts); 328 329 /* must have at least one bulk/interrupt endpoint for streaming */ 330 if (altsd->bNumEndpoints < 1) 331 return -ENODEV; 332 epd = get_endpoint(alts, 0); 333 if (!usb_endpoint_xfer_bulk(epd) && 334 !usb_endpoint_xfer_int(epd)) 335 return -ENODEV; 336 337 switch (USB_ID_VENDOR(chip->usb_id)) { 338 case 0x0499: /* Yamaha */ 339 err = create_yamaha_midi_quirk(chip, iface, driver, alts); 340 if (err != -ENODEV) 341 return err; 342 break; 343 case 0x0582: /* Roland */ 344 err = create_roland_midi_quirk(chip, iface, driver, alts); 345 if (err != -ENODEV) 346 return err; 347 break; 348 } 349 350 return create_std_midi_quirk(chip, iface, driver, alts); 351 } 352 353 static int create_autodetect_quirk(struct snd_usb_audio *chip, 354 struct usb_interface *iface, 355 struct usb_driver *driver) 356 { 357 int err; 358 359 err = create_auto_pcm_quirk(chip, iface, driver); 360 if (err == -ENODEV) 361 err = create_auto_midi_quirk(chip, iface, driver); 362 return err; 363 } 364 365 static int create_autodetect_quirks(struct snd_usb_audio *chip, 366 struct usb_interface *iface, 367 struct usb_driver *driver, 368 const struct snd_usb_audio_quirk *quirk) 369 { 370 int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; 371 int ifcount, ifnum, err; 372 373 err = create_autodetect_quirk(chip, iface, driver); 374 if (err < 0) 375 return err; 376 377 /* 378 * ALSA PCM playback/capture devices cannot be registered in two steps, 379 * so we have to claim the other corresponding interface here. 380 */ 381 ifcount = chip->dev->actconfig->desc.bNumInterfaces; 382 for (ifnum = 0; ifnum < ifcount; ifnum++) { 383 if (ifnum == probed_ifnum || quirk->ifnum >= 0) 384 continue; 385 iface = usb_ifnum_to_if(chip->dev, ifnum); 386 if (!iface || 387 usb_interface_claimed(iface) || 388 get_iface_desc(iface->altsetting)->bInterfaceClass != 389 USB_CLASS_VENDOR_SPEC) 390 continue; 391 392 err = create_autodetect_quirk(chip, iface, driver); 393 if (err >= 0) 394 usb_driver_claim_interface(driver, iface, (void *)-1L); 395 } 396 397 return 0; 398 } 399 400 /* 401 * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. 402 * The only way to detect the sample rate is by looking at wMaxPacketSize. 403 */ 404 static int create_uaxx_quirk(struct snd_usb_audio *chip, 405 struct usb_interface *iface, 406 struct usb_driver *driver, 407 const struct snd_usb_audio_quirk *quirk) 408 { 409 static const struct audioformat ua_format = { 410 .formats = SNDRV_PCM_FMTBIT_S24_3LE, 411 .channels = 2, 412 .fmt_type = UAC_FORMAT_TYPE_I, 413 .altsetting = 1, 414 .altset_idx = 1, 415 .rates = SNDRV_PCM_RATE_CONTINUOUS, 416 }; 417 struct usb_host_interface *alts; 418 struct usb_interface_descriptor *altsd; 419 struct audioformat *fp; 420 int stream, err; 421 422 /* both PCM and MIDI interfaces have 2 or more altsettings */ 423 if (iface->num_altsetting < 2) 424 return -ENXIO; 425 alts = &iface->altsetting[1]; 426 altsd = get_iface_desc(alts); 427 428 if (altsd->bNumEndpoints == 2) { 429 static const struct snd_usb_midi_endpoint_info ua700_ep = { 430 .out_cables = 0x0003, 431 .in_cables = 0x0003 432 }; 433 static const struct snd_usb_audio_quirk ua700_quirk = { 434 .type = QUIRK_MIDI_FIXED_ENDPOINT, 435 .data = &ua700_ep 436 }; 437 static const struct snd_usb_midi_endpoint_info uaxx_ep = { 438 .out_cables = 0x0001, 439 .in_cables = 0x0001 440 }; 441 static const struct snd_usb_audio_quirk uaxx_quirk = { 442 .type = QUIRK_MIDI_FIXED_ENDPOINT, 443 .data = &uaxx_ep 444 }; 445 const struct snd_usb_audio_quirk *quirk = 446 chip->usb_id == USB_ID(0x0582, 0x002b) 447 ? &ua700_quirk : &uaxx_quirk; 448 return __snd_usbmidi_create(chip->card, iface, 449 &chip->midi_list, quirk, 450 chip->usb_id); 451 } 452 453 if (altsd->bNumEndpoints != 1) 454 return -ENXIO; 455 456 fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL); 457 if (!fp) 458 return -ENOMEM; 459 460 fp->iface = altsd->bInterfaceNumber; 461 fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; 462 fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; 463 fp->datainterval = 0; 464 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); 465 INIT_LIST_HEAD(&fp->list); 466 467 switch (fp->maxpacksize) { 468 case 0x120: 469 fp->rate_max = fp->rate_min = 44100; 470 break; 471 case 0x138: 472 case 0x140: 473 fp->rate_max = fp->rate_min = 48000; 474 break; 475 case 0x258: 476 case 0x260: 477 fp->rate_max = fp->rate_min = 96000; 478 break; 479 default: 480 usb_audio_err(chip, "unknown sample rate\n"); 481 kfree(fp); 482 return -ENXIO; 483 } 484 485 stream = (fp->endpoint & USB_DIR_IN) 486 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; 487 err = snd_usb_add_audio_stream(chip, stream, fp); 488 if (err < 0) { 489 list_del(&fp->list); /* unlink for avoiding double-free */ 490 kfree(fp); 491 return err; 492 } 493 usb_set_interface(chip->dev, fp->iface, 0); 494 return 0; 495 } 496 497 /* 498 * Create a standard mixer for the specified interface. 499 */ 500 static int create_standard_mixer_quirk(struct snd_usb_audio *chip, 501 struct usb_interface *iface, 502 struct usb_driver *driver, 503 const struct snd_usb_audio_quirk *quirk) 504 { 505 if (quirk->ifnum < 0) 506 return 0; 507 508 return snd_usb_create_mixer(chip, quirk->ifnum, 0); 509 } 510 511 512 static int setup_fmt_after_resume_quirk(struct snd_usb_audio *chip, 513 struct usb_interface *iface, 514 struct usb_driver *driver, 515 const struct snd_usb_audio_quirk *quirk) 516 { 517 chip->setup_fmt_after_resume_quirk = 1; 518 return 1; /* Continue with creating streams and mixer */ 519 } 520 521 static int setup_disable_autosuspend(struct snd_usb_audio *chip, 522 struct usb_interface *iface, 523 struct usb_driver *driver, 524 const struct snd_usb_audio_quirk *quirk) 525 { 526 driver->supports_autosuspend = 0; 527 return 1; /* Continue with creating streams and mixer */ 528 } 529 530 /* 531 * audio-interface quirks 532 * 533 * returns zero if no standard audio/MIDI parsing is needed. 534 * returns a positive value if standard audio/midi interfaces are parsed 535 * after this. 536 * returns a negative value at error. 537 */ 538 int snd_usb_create_quirk(struct snd_usb_audio *chip, 539 struct usb_interface *iface, 540 struct usb_driver *driver, 541 const struct snd_usb_audio_quirk *quirk) 542 { 543 typedef int (*quirk_func_t)(struct snd_usb_audio *, 544 struct usb_interface *, 545 struct usb_driver *, 546 const struct snd_usb_audio_quirk *); 547 static const quirk_func_t quirk_funcs[] = { 548 [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, 549 [QUIRK_COMPOSITE] = create_composite_quirk, 550 [QUIRK_AUTODETECT] = create_autodetect_quirks, 551 [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, 552 [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, 553 [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, 554 [QUIRK_MIDI_ROLAND] = create_any_midi_quirk, 555 [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, 556 [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, 557 [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, 558 [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, 559 [QUIRK_MIDI_CME] = create_any_midi_quirk, 560 [QUIRK_MIDI_AKAI] = create_any_midi_quirk, 561 [QUIRK_MIDI_FTDI] = create_any_midi_quirk, 562 [QUIRK_MIDI_CH345] = create_any_midi_quirk, 563 [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, 564 [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, 565 [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, 566 [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, 567 [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, 568 [QUIRK_SETUP_FMT_AFTER_RESUME] = setup_fmt_after_resume_quirk, 569 [QUIRK_SETUP_DISABLE_AUTOSUSPEND] = setup_disable_autosuspend, 570 }; 571 572 if (quirk->type < QUIRK_TYPE_COUNT) { 573 return quirk_funcs[quirk->type](chip, iface, driver, quirk); 574 } else { 575 usb_audio_err(chip, "invalid quirk type %d\n", quirk->type); 576 return -ENXIO; 577 } 578 } 579 580 /* 581 * boot quirks 582 */ 583 584 #define EXTIGY_FIRMWARE_SIZE_OLD 794 585 #define EXTIGY_FIRMWARE_SIZE_NEW 483 586 587 static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) 588 { 589 struct usb_host_config *config = dev->actconfig; 590 int err; 591 592 if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || 593 le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { 594 dev_dbg(&dev->dev, "sending Extigy boot sequence...\n"); 595 /* Send message to force it to reconnect with full interface. */ 596 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), 597 0x10, 0x43, 0x0001, 0x000a, NULL, 0); 598 if (err < 0) 599 dev_dbg(&dev->dev, "error sending boot message: %d\n", err); 600 err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, 601 &dev->descriptor, sizeof(dev->descriptor)); 602 config = dev->actconfig; 603 if (err < 0) 604 dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); 605 err = usb_reset_configuration(dev); 606 if (err < 0) 607 dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); 608 dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n", 609 le16_to_cpu(get_cfg_desc(config)->wTotalLength)); 610 return -ENODEV; /* quit this anyway */ 611 } 612 return 0; 613 } 614 615 static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) 616 { 617 u8 buf = 1; 618 619 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, 620 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, 621 0, 0, &buf, 1); 622 if (buf == 0) { 623 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, 624 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, 625 1, 2000, NULL, 0); 626 return -ENODEV; 627 } 628 return 0; 629 } 630 631 static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) 632 { 633 int err; 634 635 if (dev->actconfig->desc.bConfigurationValue == 1) { 636 dev_info(&dev->dev, 637 "Fast Track Pro switching to config #2\n"); 638 /* This function has to be available by the usb core module. 639 * if it is not avialable the boot quirk has to be left out 640 * and the configuration has to be set by udev or hotplug 641 * rules 642 */ 643 err = usb_driver_set_configuration(dev, 2); 644 if (err < 0) 645 dev_dbg(&dev->dev, 646 "error usb_driver_set_configuration: %d\n", 647 err); 648 /* Always return an error, so that we stop creating a device 649 that will just be destroyed and recreated with a new 650 configuration */ 651 return -ENODEV; 652 } else 653 dev_info(&dev->dev, "Fast Track Pro config OK\n"); 654 655 return 0; 656 } 657 658 /* 659 * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely 660 * documented in the device's data sheet. 661 */ 662 static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) 663 { 664 u8 buf[4]; 665 buf[0] = 0x20; 666 buf[1] = value & 0xff; 667 buf[2] = (value >> 8) & 0xff; 668 buf[3] = reg; 669 return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 670 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, 671 0, 0, &buf, 4); 672 } 673 674 static int snd_usb_cm106_boot_quirk(struct usb_device *dev) 675 { 676 /* 677 * Enable line-out driver mode, set headphone source to front 678 * channels, enable stereo mic. 679 */ 680 return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); 681 } 682 683 /* 684 * CM6206 registers from the CM6206 datasheet rev 2.1 685 */ 686 #define CM6206_REG0_DMA_MASTER BIT(15) 687 #define CM6206_REG0_SPDIFO_RATE_48K (2 << 12) 688 #define CM6206_REG0_SPDIFO_RATE_96K (7 << 12) 689 /* Bit 4 thru 11 is the S/PDIF category code */ 690 #define CM6206_REG0_SPDIFO_CAT_CODE_GENERAL (0 << 4) 691 #define CM6206_REG0_SPDIFO_EMPHASIS_CD BIT(3) 692 #define CM6206_REG0_SPDIFO_COPYRIGHT_NA BIT(2) 693 #define CM6206_REG0_SPDIFO_NON_AUDIO BIT(1) 694 #define CM6206_REG0_SPDIFO_PRO_FORMAT BIT(0) 695 696 #define CM6206_REG1_TEST_SEL_CLK BIT(14) 697 #define CM6206_REG1_PLLBIN_EN BIT(13) 698 #define CM6206_REG1_SOFT_MUTE_EN BIT(12) 699 #define CM6206_REG1_GPIO4_OUT BIT(11) 700 #define CM6206_REG1_GPIO4_OE BIT(10) 701 #define CM6206_REG1_GPIO3_OUT BIT(9) 702 #define CM6206_REG1_GPIO3_OE BIT(8) 703 #define CM6206_REG1_GPIO2_OUT BIT(7) 704 #define CM6206_REG1_GPIO2_OE BIT(6) 705 #define CM6206_REG1_GPIO1_OUT BIT(5) 706 #define CM6206_REG1_GPIO1_OE BIT(4) 707 #define CM6206_REG1_SPDIFO_INVALID BIT(3) 708 #define CM6206_REG1_SPDIF_LOOP_EN BIT(2) 709 #define CM6206_REG1_SPDIFO_DIS BIT(1) 710 #define CM6206_REG1_SPDIFI_MIX BIT(0) 711 712 #define CM6206_REG2_DRIVER_ON BIT(15) 713 #define CM6206_REG2_HEADP_SEL_SIDE_CHANNELS (0 << 13) 714 #define CM6206_REG2_HEADP_SEL_SURROUND_CHANNELS (1 << 13) 715 #define CM6206_REG2_HEADP_SEL_CENTER_SUBW (2 << 13) 716 #define CM6206_REG2_HEADP_SEL_FRONT_CHANNELS (3 << 13) 717 #define CM6206_REG2_MUTE_HEADPHONE_RIGHT BIT(12) 718 #define CM6206_REG2_MUTE_HEADPHONE_LEFT BIT(11) 719 #define CM6206_REG2_MUTE_REAR_SURROUND_RIGHT BIT(10) 720 #define CM6206_REG2_MUTE_REAR_SURROUND_LEFT BIT(9) 721 #define CM6206_REG2_MUTE_SIDE_SURROUND_RIGHT BIT(8) 722 #define CM6206_REG2_MUTE_SIDE_SURROUND_LEFT BIT(7) 723 #define CM6206_REG2_MUTE_SUBWOOFER BIT(6) 724 #define CM6206_REG2_MUTE_CENTER BIT(5) 725 #define CM6206_REG2_MUTE_RIGHT_FRONT BIT(3) 726 #define CM6206_REG2_MUTE_LEFT_FRONT BIT(3) 727 #define CM6206_REG2_EN_BTL BIT(2) 728 #define CM6206_REG2_MCUCLKSEL_1_5_MHZ (0) 729 #define CM6206_REG2_MCUCLKSEL_3_MHZ (1) 730 #define CM6206_REG2_MCUCLKSEL_6_MHZ (2) 731 #define CM6206_REG2_MCUCLKSEL_12_MHZ (3) 732 733 /* Bit 11..13 sets the sensitivity to FLY tuner volume control VP/VD signal */ 734 #define CM6206_REG3_FLYSPEED_DEFAULT (2 << 11) 735 #define CM6206_REG3_VRAP25EN BIT(10) 736 #define CM6206_REG3_MSEL1 BIT(9) 737 #define CM6206_REG3_SPDIFI_RATE_44_1K BIT(0 << 7) 738 #define CM6206_REG3_SPDIFI_RATE_48K BIT(2 << 7) 739 #define CM6206_REG3_SPDIFI_RATE_32K BIT(3 << 7) 740 #define CM6206_REG3_PINSEL BIT(6) 741 #define CM6206_REG3_FOE BIT(5) 742 #define CM6206_REG3_ROE BIT(4) 743 #define CM6206_REG3_CBOE BIT(3) 744 #define CM6206_REG3_LOSE BIT(2) 745 #define CM6206_REG3_HPOE BIT(1) 746 #define CM6206_REG3_SPDIFI_CANREC BIT(0) 747 748 #define CM6206_REG5_DA_RSTN BIT(13) 749 #define CM6206_REG5_AD_RSTN BIT(12) 750 #define CM6206_REG5_SPDIFO_AD2SPDO BIT(12) 751 #define CM6206_REG5_SPDIFO_SEL_FRONT (0 << 9) 752 #define CM6206_REG5_SPDIFO_SEL_SIDE_SUR (1 << 9) 753 #define CM6206_REG5_SPDIFO_SEL_CEN_LFE (2 << 9) 754 #define CM6206_REG5_SPDIFO_SEL_REAR_SUR (3 << 9) 755 #define CM6206_REG5_CODECM BIT(8) 756 #define CM6206_REG5_EN_HPF BIT(7) 757 #define CM6206_REG5_T_SEL_DSDA4 BIT(6) 758 #define CM6206_REG5_T_SEL_DSDA3 BIT(5) 759 #define CM6206_REG5_T_SEL_DSDA2 BIT(4) 760 #define CM6206_REG5_T_SEL_DSDA1 BIT(3) 761 #define CM6206_REG5_T_SEL_DSDAD_NORMAL 0 762 #define CM6206_REG5_T_SEL_DSDAD_FRONT 4 763 #define CM6206_REG5_T_SEL_DSDAD_S_SURROUND 5 764 #define CM6206_REG5_T_SEL_DSDAD_CEN_LFE 6 765 #define CM6206_REG5_T_SEL_DSDAD_R_SURROUND 7 766 767 static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) 768 { 769 int err = 0, reg; 770 int val[] = { 771 /* 772 * Values here are chosen based on sniffing USB traffic 773 * under Windows. 774 * 775 * REG0: DAC is master, sample rate 48kHz, no copyright 776 */ 777 CM6206_REG0_SPDIFO_RATE_48K | 778 CM6206_REG0_SPDIFO_COPYRIGHT_NA, 779 /* 780 * REG1: PLL binary search enable, soft mute enable. 781 */ 782 CM6206_REG1_PLLBIN_EN | 783 CM6206_REG1_SOFT_MUTE_EN, 784 /* 785 * REG2: enable output drivers, 786 * select front channels to the headphone output, 787 * then mute the headphone channels, run the MCU 788 * at 1.5 MHz. 789 */ 790 CM6206_REG2_DRIVER_ON | 791 CM6206_REG2_HEADP_SEL_FRONT_CHANNELS | 792 CM6206_REG2_MUTE_HEADPHONE_RIGHT | 793 CM6206_REG2_MUTE_HEADPHONE_LEFT, 794 /* 795 * REG3: default flyspeed, set 2.5V mic bias 796 * enable all line out ports and enable SPDIF 797 */ 798 CM6206_REG3_FLYSPEED_DEFAULT | 799 CM6206_REG3_VRAP25EN | 800 CM6206_REG3_FOE | 801 CM6206_REG3_ROE | 802 CM6206_REG3_CBOE | 803 CM6206_REG3_LOSE | 804 CM6206_REG3_HPOE | 805 CM6206_REG3_SPDIFI_CANREC, 806 /* REG4 is just a bunch of GPIO lines */ 807 0x0000, 808 /* REG5: de-assert AD/DA reset signals */ 809 CM6206_REG5_DA_RSTN | 810 CM6206_REG5_AD_RSTN }; 811 812 for (reg = 0; reg < ARRAY_SIZE(val); reg++) { 813 err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); 814 if (err < 0) 815 return err; 816 } 817 818 return err; 819 } 820 821 /* quirk for Plantronics GameCom 780 with CM6302 chip */ 822 static int snd_usb_gamecon780_boot_quirk(struct usb_device *dev) 823 { 824 /* set the initial volume and don't change; other values are either 825 * too loud or silent due to firmware bug (bko#65251) 826 */ 827 u8 buf[2] = { 0x74, 0xe3 }; 828 return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, 829 USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, 830 UAC_FU_VOLUME << 8, 9 << 8, buf, 2); 831 } 832 833 /* 834 * Novation Twitch DJ controller 835 * Focusrite Novation Saffire 6 USB audio card 836 */ 837 static int snd_usb_novation_boot_quirk(struct usb_device *dev) 838 { 839 /* preemptively set up the device because otherwise the 840 * raw MIDI endpoints are not active */ 841 usb_set_interface(dev, 0, 1); 842 return 0; 843 } 844 845 /* 846 * This call will put the synth in "USB send" mode, i.e it will send MIDI 847 * messages through USB (this is disabled at startup). The synth will 848 * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB 849 * sign on its LCD. Values here are chosen based on sniffing USB traffic 850 * under Windows. 851 */ 852 static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) 853 { 854 int err, actual_length; 855 /* "midi send" enable */ 856 static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; 857 void *buf; 858 859 if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x05))) 860 return -EINVAL; 861 buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); 862 if (!buf) 863 return -ENOMEM; 864 err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, 865 ARRAY_SIZE(seq), &actual_length, 1000); 866 kfree(buf); 867 if (err < 0) 868 return err; 869 870 return 0; 871 } 872 873 /* 874 * Some sound cards from Native Instruments are in fact compliant to the USB 875 * audio standard of version 2 and other approved USB standards, even though 876 * they come up as vendor-specific device when first connected. 877 * 878 * However, they can be told to come up with a new set of descriptors 879 * upon their next enumeration, and the interfaces announced by the new 880 * descriptors will then be handled by the kernel's class drivers. As the 881 * product ID will also change, no further checks are required. 882 */ 883 884 static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) 885 { 886 int ret; 887 888 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 889 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 890 1, 0, NULL, 0, 1000); 891 892 if (ret < 0) 893 return ret; 894 895 usb_reset_device(dev); 896 897 /* return -EAGAIN, so the creation of an audio interface for this 898 * temporary device is aborted. The device will reconnect with a 899 * new product ID */ 900 return -EAGAIN; 901 } 902 903 static void mbox2_setup_48_24_magic(struct usb_device *dev) 904 { 905 u8 srate[3]; 906 u8 temp[12]; 907 908 /* Choose 48000Hz permanently */ 909 srate[0] = 0x80; 910 srate[1] = 0xbb; 911 srate[2] = 0x00; 912 913 /* Send the magic! */ 914 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 915 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); 916 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 917 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); 918 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 919 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); 920 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 921 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); 922 return; 923 } 924 925 /* Digidesign Mbox 2 needs to load firmware onboard 926 * and driver must wait a few seconds for initialisation. 927 */ 928 929 #define MBOX2_FIRMWARE_SIZE 646 930 #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ 931 #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ 932 933 static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) 934 { 935 struct usb_host_config *config = dev->actconfig; 936 int err; 937 u8 bootresponse[0x12]; 938 int fwsize; 939 int count; 940 941 fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength); 942 943 if (fwsize != MBOX2_FIRMWARE_SIZE) { 944 dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize); 945 return -ENODEV; 946 } 947 948 dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n"); 949 950 count = 0; 951 bootresponse[0] = MBOX2_BOOT_LOADING; 952 while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { 953 msleep(500); /* 0.5 second delay */ 954 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 955 /* Control magic - load onboard firmware */ 956 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); 957 if (bootresponse[0] == MBOX2_BOOT_READY) 958 break; 959 dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n"); 960 count++; 961 } 962 963 if (bootresponse[0] != MBOX2_BOOT_READY) { 964 dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); 965 return -ENODEV; 966 } 967 968 dev_dbg(&dev->dev, "device initialised!\n"); 969 970 err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, 971 &dev->descriptor, sizeof(dev->descriptor)); 972 config = dev->actconfig; 973 if (err < 0) 974 dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); 975 976 err = usb_reset_configuration(dev); 977 if (err < 0) 978 dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); 979 dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n", 980 le16_to_cpu(get_cfg_desc(config)->wTotalLength)); 981 982 mbox2_setup_48_24_magic(dev); 983 984 dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz"); 985 986 return 0; /* Successful boot */ 987 } 988 989 static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) 990 { 991 int err; 992 993 dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n"); 994 995 /* If the Axe-Fx III has not fully booted, it will timeout when trying 996 * to enable the audio streaming interface. A more generous timeout is 997 * used here to detect when the Axe-Fx III has finished booting as the 998 * set interface message will be acked once it has 999 */ 1000 err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 1001 USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, 1002 1, 1, NULL, 0, 120000); 1003 if (err < 0) { 1004 dev_err(&dev->dev, 1005 "failed waiting for Axe-Fx III to boot: %d\n", err); 1006 return err; 1007 } 1008 1009 dev_dbg(&dev->dev, "Axe-Fx III is now ready\n"); 1010 1011 err = usb_set_interface(dev, 1, 0); 1012 if (err < 0) 1013 dev_dbg(&dev->dev, 1014 "error stopping Axe-Fx III interface: %d\n", err); 1015 1016 return 0; 1017 } 1018 1019 1020 #define MICROBOOK_BUF_SIZE 128 1021 1022 static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf, 1023 int buf_size, int *length) 1024 { 1025 int err, actual_length; 1026 1027 if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x01))) 1028 return -EINVAL; 1029 err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length, 1030 &actual_length, 1000); 1031 if (err < 0) 1032 return err; 1033 1034 print_hex_dump(KERN_DEBUG, "MicroBookII snd: ", DUMP_PREFIX_NONE, 16, 1, 1035 buf, actual_length, false); 1036 1037 memset(buf, 0, buf_size); 1038 1039 if (usb_pipe_type_check(dev, usb_rcvintpipe(dev, 0x82))) 1040 return -EINVAL; 1041 err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size, 1042 &actual_length, 1000); 1043 if (err < 0) 1044 return err; 1045 1046 print_hex_dump(KERN_DEBUG, "MicroBookII rcv: ", DUMP_PREFIX_NONE, 16, 1, 1047 buf, actual_length, false); 1048 1049 *length = actual_length; 1050 return 0; 1051 } 1052 1053 static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev) 1054 { 1055 int err, actual_length, poll_attempts = 0; 1056 static const u8 set_samplerate_seq[] = { 0x00, 0x00, 0x00, 0x00, 1057 0x00, 0x00, 0x0b, 0x14, 1058 0x00, 0x00, 0x00, 0x01 }; 1059 static const u8 poll_ready_seq[] = { 0x00, 0x04, 0x00, 0x00, 1060 0x00, 0x00, 0x0b, 0x18 }; 1061 u8 *buf = kzalloc(MICROBOOK_BUF_SIZE, GFP_KERNEL); 1062 1063 if (!buf) 1064 return -ENOMEM; 1065 1066 dev_info(&dev->dev, "Waiting for MOTU Microbook II to boot up...\n"); 1067 1068 /* First we tell the device which sample rate to use. */ 1069 memcpy(buf, set_samplerate_seq, sizeof(set_samplerate_seq)); 1070 actual_length = sizeof(set_samplerate_seq); 1071 err = snd_usb_motu_microbookii_communicate(dev, buf, MICROBOOK_BUF_SIZE, 1072 &actual_length); 1073 1074 if (err < 0) { 1075 dev_err(&dev->dev, 1076 "failed setting the sample rate for Motu MicroBook II: %d\n", 1077 err); 1078 goto free_buf; 1079 } 1080 1081 /* Then we poll every 100 ms until the device informs of its readiness. */ 1082 while (true) { 1083 if (++poll_attempts > 100) { 1084 dev_err(&dev->dev, 1085 "failed booting Motu MicroBook II: timeout\n"); 1086 err = -ENODEV; 1087 goto free_buf; 1088 } 1089 1090 memset(buf, 0, MICROBOOK_BUF_SIZE); 1091 memcpy(buf, poll_ready_seq, sizeof(poll_ready_seq)); 1092 1093 actual_length = sizeof(poll_ready_seq); 1094 err = snd_usb_motu_microbookii_communicate( 1095 dev, buf, MICROBOOK_BUF_SIZE, &actual_length); 1096 if (err < 0) { 1097 dev_err(&dev->dev, 1098 "failed booting Motu MicroBook II: communication error %d\n", 1099 err); 1100 goto free_buf; 1101 } 1102 1103 /* the device signals its readiness through a message of the 1104 * form 1105 * XX 06 00 00 00 00 0b 18 00 00 00 01 1106 * If the device is not yet ready to accept audio data, the 1107 * last byte of that sequence is 00. 1108 */ 1109 if (actual_length == 12 && buf[actual_length - 1] == 1) 1110 break; 1111 1112 msleep(100); 1113 } 1114 1115 dev_info(&dev->dev, "MOTU MicroBook II ready\n"); 1116 1117 free_buf: 1118 kfree(buf); 1119 return err; 1120 } 1121 1122 static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev) 1123 { 1124 int ret; 1125 1126 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 1127 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1128 0x0, 0, NULL, 0, 1000); 1129 1130 if (ret < 0) 1131 return ret; 1132 1133 msleep(2000); 1134 1135 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 1136 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1137 0x20, 0, NULL, 0, 1000); 1138 1139 if (ret < 0) 1140 return ret; 1141 1142 return 0; 1143 } 1144 1145 /* 1146 * Setup quirks 1147 */ 1148 #define MAUDIO_SET 0x01 /* parse device_setup */ 1149 #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */ 1150 #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */ 1151 #define MAUDIO_SET_96K 0x04 /* 48-96kHz rate if set, 8-48kHz otherwise */ 1152 #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */ 1153 #define MAUDIO_SET_DI 0x10 /* enable Digital Input */ 1154 #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */ 1155 #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48kHz+Digital Input */ 1156 #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48kHz+No Digital Input */ 1157 #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48kHz+Digital Input */ 1158 #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48kHz+No Digital Input */ 1159 1160 static int quattro_skip_setting_quirk(struct snd_usb_audio *chip, 1161 int iface, int altno) 1162 { 1163 /* Reset ALL ifaces to 0 altsetting. 1164 * Call it for every possible altsetting of every interface. 1165 */ 1166 usb_set_interface(chip->dev, iface, 0); 1167 if (chip->setup & MAUDIO_SET) { 1168 if (chip->setup & MAUDIO_SET_COMPATIBLE) { 1169 if (iface != 1 && iface != 2) 1170 return 1; /* skip all interfaces but 1 and 2 */ 1171 } else { 1172 unsigned int mask; 1173 if (iface == 1 || iface == 2) 1174 return 1; /* skip interfaces 1 and 2 */ 1175 if ((chip->setup & MAUDIO_SET_96K) && altno != 1) 1176 return 1; /* skip this altsetting */ 1177 mask = chip->setup & MAUDIO_SET_MASK; 1178 if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) 1179 return 1; /* skip this altsetting */ 1180 if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) 1181 return 1; /* skip this altsetting */ 1182 if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4) 1183 return 1; /* skip this altsetting */ 1184 } 1185 } 1186 usb_audio_dbg(chip, 1187 "using altsetting %d for interface %d config %d\n", 1188 altno, iface, chip->setup); 1189 return 0; /* keep this altsetting */ 1190 } 1191 1192 static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, 1193 int iface, 1194 int altno) 1195 { 1196 /* Reset ALL ifaces to 0 altsetting. 1197 * Call it for every possible altsetting of every interface. 1198 */ 1199 usb_set_interface(chip->dev, iface, 0); 1200 1201 if (chip->setup & MAUDIO_SET) { 1202 unsigned int mask; 1203 if ((chip->setup & MAUDIO_SET_DTS) && altno != 6) 1204 return 1; /* skip this altsetting */ 1205 if ((chip->setup & MAUDIO_SET_96K) && altno != 1) 1206 return 1; /* skip this altsetting */ 1207 mask = chip->setup & MAUDIO_SET_MASK; 1208 if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) 1209 return 1; /* skip this altsetting */ 1210 if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) 1211 return 1; /* skip this altsetting */ 1212 if (mask == MAUDIO_SET_16B_48K_DI && altno != 4) 1213 return 1; /* skip this altsetting */ 1214 if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5) 1215 return 1; /* skip this altsetting */ 1216 } 1217 1218 return 0; /* keep this altsetting */ 1219 } 1220 1221 static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, 1222 int iface, int altno) 1223 { 1224 /* Reset ALL ifaces to 0 altsetting. 1225 * Call it for every possible altsetting of every interface. 1226 */ 1227 usb_set_interface(chip->dev, iface, 0); 1228 1229 /* possible configuration where both inputs and only one output is 1230 *used is not supported by the current setup 1231 */ 1232 if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) { 1233 if (chip->setup & MAUDIO_SET_96K) { 1234 if (altno != 3 && altno != 6) 1235 return 1; 1236 } else if (chip->setup & MAUDIO_SET_DI) { 1237 if (iface == 4) 1238 return 1; /* no analog input */ 1239 if (altno != 2 && altno != 5) 1240 return 1; /* enable only altsets 2 and 5 */ 1241 } else { 1242 if (iface == 5) 1243 return 1; /* disable digialt input */ 1244 if (altno != 2 && altno != 5) 1245 return 1; /* enalbe only altsets 2 and 5 */ 1246 } 1247 } else { 1248 /* keep only 16-Bit mode */ 1249 if (altno != 1) 1250 return 1; 1251 } 1252 1253 usb_audio_dbg(chip, 1254 "using altsetting %d for interface %d config %d\n", 1255 altno, iface, chip->setup); 1256 return 0; /* keep this altsetting */ 1257 } 1258 1259 static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip, 1260 int iface, int altno) 1261 { 1262 /* 1263 * Altno settings: 1264 * 1265 * Playback (Interface 1): 1266 * 1: 6 Analog + 2 S/PDIF 1267 * 2: 6 Analog + 2 S/PDIF 1268 * 3: 6 Analog 1269 * 1270 * Capture (Interface 2): 1271 * 1: 8 Analog + 2 S/PDIF + 8 ADAT 1272 * 2: 8 Analog + 2 S/PDIF + 4 ADAT 1273 * 3: 8 Analog 1274 */ 1275 1276 /* 1277 * I'll leave 2 as the default one and 1278 * use device_setup to switch to the 1279 * other two. 1280 */ 1281 if ((chip->setup == 0 || chip->setup > 2) && altno != 2) 1282 return 1; 1283 else if (chip->setup == 1 && altno != 1) 1284 return 1; 1285 else if (chip->setup == 2 && altno != 3) 1286 return 1; 1287 1288 return 0; 1289 } 1290 1291 int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, 1292 int iface, 1293 int altno) 1294 { 1295 /* audiophile usb: skip altsets incompatible with device_setup */ 1296 if (chip->usb_id == USB_ID(0x0763, 0x2003)) 1297 return audiophile_skip_setting_quirk(chip, iface, altno); 1298 /* quattro usb: skip altsets incompatible with device_setup */ 1299 if (chip->usb_id == USB_ID(0x0763, 0x2001)) 1300 return quattro_skip_setting_quirk(chip, iface, altno); 1301 /* fasttrackpro usb: skip altsets incompatible with device_setup */ 1302 if (chip->usb_id == USB_ID(0x0763, 0x2012)) 1303 return fasttrackpro_skip_setting_quirk(chip, iface, altno); 1304 /* presonus studio 1810c: skip altsets incompatible with device_setup */ 1305 if (chip->usb_id == USB_ID(0x0194f, 0x010c)) 1306 return s1810c_skip_setting_quirk(chip, iface, altno); 1307 1308 1309 return 0; 1310 } 1311 1312 int snd_usb_apply_boot_quirk(struct usb_device *dev, 1313 struct usb_interface *intf, 1314 const struct snd_usb_audio_quirk *quirk, 1315 unsigned int id) 1316 { 1317 switch (id) { 1318 case USB_ID(0x041e, 0x3000): 1319 /* SB Extigy needs special boot-up sequence */ 1320 /* if more models come, this will go to the quirk list. */ 1321 return snd_usb_extigy_boot_quirk(dev, intf); 1322 1323 case USB_ID(0x041e, 0x3020): 1324 /* SB Audigy 2 NX needs its own boot-up magic, too */ 1325 return snd_usb_audigy2nx_boot_quirk(dev); 1326 1327 case USB_ID(0x10f5, 0x0200): 1328 /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ 1329 return snd_usb_cm106_boot_quirk(dev); 1330 1331 case USB_ID(0x0d8c, 0x0102): 1332 /* C-Media CM6206 / CM106-Like Sound Device */ 1333 case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ 1334 return snd_usb_cm6206_boot_quirk(dev); 1335 1336 case USB_ID(0x0dba, 0x3000): 1337 /* Digidesign Mbox 2 */ 1338 return snd_usb_mbox2_boot_quirk(dev); 1339 1340 case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ 1341 case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ 1342 return snd_usb_novation_boot_quirk(dev); 1343 1344 case USB_ID(0x133e, 0x0815): 1345 /* Access Music VirusTI Desktop */ 1346 return snd_usb_accessmusic_boot_quirk(dev); 1347 1348 case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ 1349 case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ 1350 case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ 1351 return snd_usb_nativeinstruments_boot_quirk(dev); 1352 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ 1353 return snd_usb_fasttrackpro_boot_quirk(dev); 1354 case USB_ID(0x047f, 0xc010): /* Plantronics Gamecom 780 */ 1355 return snd_usb_gamecon780_boot_quirk(dev); 1356 case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ 1357 return snd_usb_axefx3_boot_quirk(dev); 1358 case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ 1359 /* 1360 * For some reason interface 3 with vendor-spec class is 1361 * detected on MicroBook IIc. 1362 */ 1363 if (get_iface_desc(intf->altsetting)->bInterfaceClass == 1364 USB_CLASS_VENDOR_SPEC && 1365 get_iface_desc(intf->altsetting)->bInterfaceNumber < 3) 1366 return snd_usb_motu_microbookii_boot_quirk(dev); 1367 break; 1368 } 1369 1370 return 0; 1371 } 1372 1373 int snd_usb_apply_boot_quirk_once(struct usb_device *dev, 1374 struct usb_interface *intf, 1375 const struct snd_usb_audio_quirk *quirk, 1376 unsigned int id) 1377 { 1378 switch (id) { 1379 case USB_ID(0x07fd, 0x0008): /* MOTU M Series */ 1380 return snd_usb_motu_m_series_boot_quirk(dev); 1381 } 1382 1383 return 0; 1384 } 1385 1386 /* 1387 * check if the device uses big-endian samples 1388 */ 1389 int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) 1390 { 1391 /* it depends on altsetting whether the device is big-endian or not */ 1392 switch (chip->usb_id) { 1393 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ 1394 if (fp->altsetting == 2 || fp->altsetting == 3 || 1395 fp->altsetting == 5 || fp->altsetting == 6) 1396 return 1; 1397 break; 1398 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ 1399 if (chip->setup == 0x00 || 1400 fp->altsetting == 1 || fp->altsetting == 2 || 1401 fp->altsetting == 3) 1402 return 1; 1403 break; 1404 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */ 1405 if (fp->altsetting == 2 || fp->altsetting == 3 || 1406 fp->altsetting == 5 || fp->altsetting == 6) 1407 return 1; 1408 break; 1409 } 1410 return 0; 1411 } 1412 1413 /* 1414 * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, 1415 * not for interface. 1416 */ 1417 1418 enum { 1419 EMU_QUIRK_SR_44100HZ = 0, 1420 EMU_QUIRK_SR_48000HZ, 1421 EMU_QUIRK_SR_88200HZ, 1422 EMU_QUIRK_SR_96000HZ, 1423 EMU_QUIRK_SR_176400HZ, 1424 EMU_QUIRK_SR_192000HZ 1425 }; 1426 1427 static void set_format_emu_quirk(struct snd_usb_substream *subs, 1428 struct audioformat *fmt) 1429 { 1430 unsigned char emu_samplerate_id = 0; 1431 1432 /* When capture is active 1433 * sample rate shouldn't be changed 1434 * by playback substream 1435 */ 1436 if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { 1437 if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) 1438 return; 1439 } 1440 1441 switch (fmt->rate_min) { 1442 case 48000: 1443 emu_samplerate_id = EMU_QUIRK_SR_48000HZ; 1444 break; 1445 case 88200: 1446 emu_samplerate_id = EMU_QUIRK_SR_88200HZ; 1447 break; 1448 case 96000: 1449 emu_samplerate_id = EMU_QUIRK_SR_96000HZ; 1450 break; 1451 case 176400: 1452 emu_samplerate_id = EMU_QUIRK_SR_176400HZ; 1453 break; 1454 case 192000: 1455 emu_samplerate_id = EMU_QUIRK_SR_192000HZ; 1456 break; 1457 default: 1458 emu_samplerate_id = EMU_QUIRK_SR_44100HZ; 1459 break; 1460 } 1461 snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); 1462 subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; 1463 } 1464 1465 1466 /* 1467 * Pioneer DJ DJM-900NXS2 1468 * Device needs to know the sample rate each time substream is started 1469 */ 1470 static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs) 1471 { 1472 1473 /* Convert sample rate value to little endian */ 1474 u8 sr[3]; 1475 1476 sr[0] = subs->cur_rate & 0xff; 1477 sr[1] = (subs->cur_rate >> 8) & 0xff; 1478 sr[2] = (subs->cur_rate >> 16) & 0xff; 1479 1480 /* Configure device */ 1481 usb_set_interface(subs->dev, 0, 1); 1482 snd_usb_ctl_msg(subs->stream->chip->dev, 1483 usb_rcvctrlpipe(subs->stream->chip->dev, 0), 1484 0x01, 0x22, 0x0100, 0x0082, &sr, 0x0003); 1485 1486 return 0; 1487 } 1488 1489 void snd_usb_set_format_quirk(struct snd_usb_substream *subs, 1490 struct audioformat *fmt) 1491 { 1492 switch (subs->stream->chip->usb_id) { 1493 case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ 1494 case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ 1495 case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ 1496 case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ 1497 set_format_emu_quirk(subs, fmt); 1498 break; 1499 case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */ 1500 case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ 1501 pioneer_djm_set_format_quirk(subs); 1502 break; 1503 case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */ 1504 subs->stream_offset_adj = 2; 1505 break; 1506 } 1507 } 1508 1509 bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) 1510 { 1511 /* devices which do not support reading the sample rate. */ 1512 switch (chip->usb_id) { 1513 case USB_ID(0x041e, 0x4080): /* Creative Live Cam VF0610 */ 1514 case USB_ID(0x04d8, 0xfeea): /* Benchmark DAC1 Pre */ 1515 case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */ 1516 case USB_ID(0x05a3, 0x9420): /* ELP HD USB Camera */ 1517 case USB_ID(0x05a7, 0x1020): /* Bose Companion 5 */ 1518 case USB_ID(0x074d, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ 1519 case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */ 1520 case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ 1521 case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */ 1522 case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */ 1523 return true; 1524 } 1525 1526 /* devices of these vendors don't support reading rate, either */ 1527 switch (USB_ID_VENDOR(chip->usb_id)) { 1528 case 0x045e: /* MS Lifecam */ 1529 case 0x047f: /* Plantronics */ 1530 case 0x1de7: /* Phoenix Audio */ 1531 return true; 1532 } 1533 1534 return false; 1535 } 1536 1537 /* ITF-USB DSD based DACs need a vendor cmd to switch 1538 * between PCM and native DSD mode 1539 */ 1540 static bool is_itf_usb_dsd_dac(unsigned int id) 1541 { 1542 switch (id) { 1543 case USB_ID(0x154e, 0x1002): /* Denon DCD-1500RE */ 1544 case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */ 1545 case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */ 1546 case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */ 1547 case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */ 1548 case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-501V2/UD-503/NT-503 */ 1549 case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */ 1550 case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */ 1551 return true; 1552 } 1553 return false; 1554 } 1555 1556 int snd_usb_select_mode_quirk(struct snd_usb_substream *subs, 1557 struct audioformat *fmt) 1558 { 1559 struct usb_device *dev = subs->dev; 1560 int err; 1561 1562 if (is_itf_usb_dsd_dac(subs->stream->chip->usb_id)) { 1563 /* First switch to alt set 0, otherwise the mode switch cmd 1564 * will not be accepted by the DAC 1565 */ 1566 err = usb_set_interface(dev, fmt->iface, 0); 1567 if (err < 0) 1568 return err; 1569 1570 msleep(20); /* Delay needed after setting the interface */ 1571 1572 /* Vendor mode switch cmd is required. */ 1573 if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) { 1574 /* DSD mode (DSD_U32) requested */ 1575 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, 1576 USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 1577 1, 1, NULL, 0); 1578 if (err < 0) 1579 return err; 1580 1581 } else { 1582 /* PCM or DOP mode (S32) requested */ 1583 /* PCM mode (S16) requested */ 1584 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, 1585 USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 1586 0, 1, NULL, 0); 1587 if (err < 0) 1588 return err; 1589 1590 } 1591 msleep(20); 1592 } 1593 return 0; 1594 } 1595 1596 void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep) 1597 { 1598 /* 1599 * "Playback Design" products send bogus feedback data at the start 1600 * of the stream. Ignore them. 1601 */ 1602 if (USB_ID_VENDOR(ep->chip->usb_id) == 0x23ba && 1603 ep->type == SND_USB_ENDPOINT_TYPE_SYNC) 1604 ep->skip_packets = 4; 1605 1606 /* 1607 * M-Audio Fast Track C400/C600 - when packets are not skipped, real 1608 * world latency varies by approx. +/- 50 frames (at 96kHz) each time 1609 * the stream is (re)started. When skipping packets 16 at endpoint 1610 * start up, the real world latency is stable within +/- 1 frame (also 1611 * across power cycles). 1612 */ 1613 if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) || 1614 ep->chip->usb_id == USB_ID(0x0763, 0x2031)) && 1615 ep->type == SND_USB_ENDPOINT_TYPE_DATA) 1616 ep->skip_packets = 16; 1617 1618 /* Work around devices that report unreasonable feedback data */ 1619 if ((ep->chip->usb_id == USB_ID(0x0644, 0x8038) || /* TEAC UD-H01 */ 1620 ep->chip->usb_id == USB_ID(0x1852, 0x5034)) && /* T+A Dac8 */ 1621 ep->syncmaxsize == 4) 1622 ep->tenor_fb_quirk = 1; 1623 } 1624 1625 void snd_usb_set_interface_quirk(struct usb_device *dev) 1626 { 1627 struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); 1628 1629 if (!chip) 1630 return; 1631 /* 1632 * "Playback Design" products need a 50ms delay after setting the 1633 * USB interface. 1634 */ 1635 switch (USB_ID_VENDOR(chip->usb_id)) { 1636 case 0x23ba: /* Playback Design */ 1637 case 0x0644: /* TEAC Corp. */ 1638 msleep(50); 1639 break; 1640 } 1641 } 1642 1643 /* quirk applied after snd_usb_ctl_msg(); not applied during boot quirks */ 1644 void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, 1645 __u8 request, __u8 requesttype, __u16 value, 1646 __u16 index, void *data, __u16 size) 1647 { 1648 struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); 1649 1650 if (!chip) 1651 return; 1652 /* 1653 * "Playback Design" products need a 20ms delay after each 1654 * class compliant request 1655 */ 1656 if (USB_ID_VENDOR(chip->usb_id) == 0x23ba && 1657 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) 1658 msleep(20); 1659 1660 /* 1661 * "TEAC Corp." products need a 20ms delay after each 1662 * class compliant request 1663 */ 1664 if (USB_ID_VENDOR(chip->usb_id) == 0x0644 && 1665 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) 1666 msleep(20); 1667 1668 /* ITF-USB DSD based DACs functionality need a delay 1669 * after each class compliant request 1670 */ 1671 if (is_itf_usb_dsd_dac(chip->usb_id) 1672 && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) 1673 msleep(20); 1674 1675 /* Zoom R16/24, many Logitech(at least H650e/H570e/BCC950), 1676 * Jabra 550a, Kingston HyperX needs a tiny delay here, 1677 * otherwise requests like get/set frequency return 1678 * as failed despite actually succeeding. 1679 */ 1680 if ((chip->usb_id == USB_ID(0x1686, 0x00dd) || 1681 USB_ID_VENDOR(chip->usb_id) == 0x046d || /* Logitech */ 1682 chip->usb_id == USB_ID(0x0b0e, 0x0349) || 1683 chip->usb_id == USB_ID(0x0951, 0x16ad)) && 1684 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) 1685 usleep_range(1000, 2000); 1686 1687 /* 1688 * Samsung USBC Headset (AKG) need a tiny delay after each 1689 * class compliant request. (Model number: AAM625R or AAM627R) 1690 */ 1691 if (chip->usb_id == USB_ID(0x04e8, 0xa051) && 1692 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) 1693 usleep_range(5000, 6000); 1694 } 1695 1696 /* 1697 * snd_usb_interface_dsd_format_quirks() is called from format.c to 1698 * augment the PCM format bit-field for DSD types. The UAC standards 1699 * don't have a designated bit field to denote DSD-capable interfaces, 1700 * hence all hardware that is known to support this format has to be 1701 * listed here. 1702 */ 1703 u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, 1704 struct audioformat *fp, 1705 unsigned int sample_bytes) 1706 { 1707 struct usb_interface *iface; 1708 1709 /* Playback Designs */ 1710 if (USB_ID_VENDOR(chip->usb_id) == 0x23ba && 1711 USB_ID_PRODUCT(chip->usb_id) < 0x0110) { 1712 switch (fp->altsetting) { 1713 case 1: 1714 fp->dsd_dop = true; 1715 return SNDRV_PCM_FMTBIT_DSD_U16_LE; 1716 case 2: 1717 fp->dsd_bitrev = true; 1718 return SNDRV_PCM_FMTBIT_DSD_U8; 1719 case 3: 1720 fp->dsd_bitrev = true; 1721 return SNDRV_PCM_FMTBIT_DSD_U16_LE; 1722 } 1723 } 1724 1725 /* XMOS based USB DACs */ 1726 switch (chip->usb_id) { 1727 case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */ 1728 case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */ 1729 case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */ 1730 if (fp->altsetting == 2) 1731 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1732 break; 1733 1734 case USB_ID(0x0d8c, 0x0316): /* Hegel HD12 DSD */ 1735 case USB_ID(0x10cb, 0x0103): /* The Bit Opus #3; with fp->dsd_raw */ 1736 case USB_ID(0x16d0, 0x06b2): /* NuPrime DAC-10 */ 1737 case USB_ID(0x16d0, 0x09dd): /* Encore mDSD */ 1738 case USB_ID(0x16d0, 0x0733): /* Furutech ADL Stratos */ 1739 case USB_ID(0x16d0, 0x09db): /* NuPrime Audio DAC-9 */ 1740 case USB_ID(0x1db5, 0x0003): /* Bryston BDA3 */ 1741 case USB_ID(0x22e1, 0xca01): /* HDTA Serenade DSD */ 1742 case USB_ID(0x249c, 0x9326): /* M2Tech Young MkIII */ 1743 case USB_ID(0x2616, 0x0106): /* PS Audio NuWave DAC */ 1744 case USB_ID(0x2622, 0x0041): /* Audiolab M-DAC+ */ 1745 case USB_ID(0x27f7, 0x3002): /* W4S DAC-2v2SE */ 1746 case USB_ID(0x29a2, 0x0086): /* Mutec MC3+ USB */ 1747 case USB_ID(0x6b42, 0x0042): /* MSB Technology */ 1748 if (fp->altsetting == 3) 1749 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1750 break; 1751 1752 /* Amanero Combo384 USB based DACs with native DSD support */ 1753 case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */ 1754 case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */ 1755 case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */ 1756 case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */ 1757 if (fp->altsetting == 2) { 1758 switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) { 1759 case 0x199: 1760 return SNDRV_PCM_FMTBIT_DSD_U32_LE; 1761 case 0x19b: 1762 case 0x203: 1763 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1764 default: 1765 break; 1766 } 1767 } 1768 break; 1769 case USB_ID(0x16d0, 0x0a23): 1770 if (fp->altsetting == 2) 1771 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1772 break; 1773 1774 default: 1775 break; 1776 } 1777 1778 /* ITF-USB DSD based DACs */ 1779 if (is_itf_usb_dsd_dac(chip->usb_id)) { 1780 iface = usb_ifnum_to_if(chip->dev, fp->iface); 1781 1782 /* Altsetting 2 support native DSD if the num of altsets is 1783 * three (0-2), 1784 * Altsetting 3 support native DSD if the num of altsets is 1785 * four (0-3). 1786 */ 1787 if (fp->altsetting == iface->num_altsetting - 1) 1788 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1789 } 1790 1791 /* Mostly generic method to detect many DSD-capable implementations - 1792 * from XMOS/Thesycon 1793 */ 1794 switch (USB_ID_VENDOR(chip->usb_id)) { 1795 case 0x152a: /* Thesycon devices */ 1796 case 0x20b1: /* XMOS based devices */ 1797 case 0x22d9: /* Oppo */ 1798 case 0x23ba: /* Playback Designs */ 1799 case 0x25ce: /* Mytek devices */ 1800 case 0x278b: /* Rotel? */ 1801 case 0x292b: /* Gustard/Ess based devices */ 1802 case 0x2ab6: /* T+A devices */ 1803 case 0x3353: /* Khadas devices */ 1804 case 0x3842: /* EVGA */ 1805 case 0xc502: /* HiBy devices */ 1806 if (fp->dsd_raw) 1807 return SNDRV_PCM_FMTBIT_DSD_U32_BE; 1808 break; 1809 default: 1810 break; 1811 1812 } 1813 1814 return 0; 1815 } 1816 1817 void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, 1818 struct audioformat *fp, 1819 int stream) 1820 { 1821 switch (chip->usb_id) { 1822 case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */ 1823 /* Optoplay sets the sample rate attribute although 1824 * it seems not supporting it in fact. 1825 */ 1826 fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE; 1827 break; 1828 case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ 1829 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ 1830 /* doesn't set the sample rate attribute, but supports it */ 1831 fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; 1832 break; 1833 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */ 1834 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ 1835 case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ 1836 case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is 1837 an older model 77d:223) */ 1838 /* 1839 * plantronics headset and Griffin iMic have set adaptive-in 1840 * although it's really not... 1841 */ 1842 fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE; 1843 if (stream == SNDRV_PCM_STREAM_PLAYBACK) 1844 fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE; 1845 else 1846 fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; 1847 break; 1848 case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook IIc */ 1849 /* 1850 * MaxPacketsOnly attribute is erroneously set in endpoint 1851 * descriptors. As a result this card produces noise with 1852 * all sample rates other than 96 kHz. 1853 */ 1854 fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX; 1855 break; 1856 } 1857 } 1858 1859 /* 1860 * registration quirk: 1861 * the registration is skipped if a device matches with the given ID, 1862 * unless the interface reaches to the defined one. This is for delaying 1863 * the registration until the last known interface, so that the card and 1864 * devices appear at the same time. 1865 */ 1866 1867 struct registration_quirk { 1868 unsigned int usb_id; /* composed via USB_ID() */ 1869 unsigned int interface; /* the interface to trigger register */ 1870 }; 1871 1872 #define REG_QUIRK_ENTRY(vendor, product, iface) \ 1873 { .usb_id = USB_ID(vendor, product), .interface = (iface) } 1874 1875 static const struct registration_quirk registration_quirks[] = { 1876 REG_QUIRK_ENTRY(0x0951, 0x16d8, 2), /* Kingston HyperX AMP */ 1877 REG_QUIRK_ENTRY(0x0951, 0x16ed, 2), /* Kingston HyperX Cloud Alpha S */ 1878 REG_QUIRK_ENTRY(0x0951, 0x16ea, 2), /* Kingston HyperX Cloud Flight S */ 1879 { 0 } /* terminator */ 1880 }; 1881 1882 /* return true if skipping registration */ 1883 bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface) 1884 { 1885 const struct registration_quirk *q; 1886 1887 for (q = registration_quirks; q->usb_id; q++) 1888 if (chip->usb_id == q->usb_id) 1889 return iface != q->interface; 1890 1891 /* Register as normal */ 1892 return false; 1893 } 1894