1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Presonus Studio 1810c driver for ALSA 4 * Copyright (C) 2019 Nick Kossifidis <mickflemm@gmail.com> 5 * 6 * Based on reverse engineering of the communication protocol 7 * between the windows driver / Univeral Control (UC) program 8 * and the device, through usbmon. 9 * 10 * For now this bypasses the mixer, with all channels split, 11 * so that the software can mix with greater flexibility. 12 * It also adds controls for the 4 buttons on the front of 13 * the device. 14 */ 15 16 #include <linux/usb.h> 17 #include <linux/usb/audio-v2.h> 18 #include <linux/slab.h> 19 #include <sound/core.h> 20 #include <sound/control.h> 21 22 #include "usbaudio.h" 23 #include "mixer.h" 24 #include "mixer_quirks.h" 25 #include "helper.h" 26 #include "mixer_s1810c.h" 27 28 #define SC1810C_CMD_REQ 160 29 #define SC1810C_CMD_REQTYPE \ 30 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT) 31 #define SC1810C_CMD_F1 0x50617269 32 #define SC1810C_CMD_F2 0x14 33 34 /* 35 * DISCLAIMER: These are just guesses based on the 36 * dumps I got. 37 * 38 * It seems like a selects between 39 * device (0), mixer (0x64) and output (0x65) 40 * 41 * For mixer (0x64): 42 * * b selects an input channel (see below). 43 * * c selects an output channel pair (see below). 44 * * d selects left (0) or right (1) of that pair. 45 * * e 0-> disconnect, 0x01000000-> connect, 46 * 0x0109-> used for stereo-linking channels, 47 * e is also used for setting volume levels 48 * in which case b is also set so I guess 49 * this way it is possible to set the volume 50 * level from the specified input to the 51 * specified output. 52 * 53 * IN Channels: 54 * 0 - 7 Mic/Inst/Line (Analog inputs) 55 * 8 - 9 S/PDIF 56 * 10 - 17 ADAT 57 * 18 - 35 DAW (Inputs from the host) 58 * 59 * OUT Channels (pairs): 60 * 0 -> Main out 61 * 1 -> Line1/2 62 * 2 -> Line3/4 63 * 3 -> S/PDIF 64 * 4 -> ADAT? 65 * 66 * For device (0): 67 * * b and c are not used, at least not on the 68 * dumps I got. 69 * * d sets the control id to be modified 70 * (see below). 71 * * e sets the setting for that control. 72 * (so for the switches I was interested 73 * in it's 0/1) 74 * 75 * For output (0x65): 76 * * b is the output channel (see above). 77 * * c is zero. 78 * * e I guess the same as with mixer except 0x0109 79 * which I didn't see in my dumps. 80 * 81 * The two fixed fields have the same values for 82 * mixer and output but a different set for device. 83 */ 84 struct s1810c_ctl_packet { 85 u32 a; 86 u32 b; 87 u32 fixed1; 88 u32 fixed2; 89 u32 c; 90 u32 d; 91 u32 e; 92 }; 93 94 #define SC1810C_CTL_LINE_SW 0 95 #define SC1810C_CTL_MUTE_SW 1 96 #define SC1810C_CTL_AB_SW 3 97 #define SC1810C_CTL_48V_SW 4 98 99 #define SC1810C_SET_STATE_REQ 161 100 #define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE 101 #define SC1810C_SET_STATE_F1 0x64656D73 102 #define SC1810C_SET_STATE_F2 0xF4 103 104 #define SC1810C_GET_STATE_REQ 162 105 #define SC1810C_GET_STATE_REQTYPE \ 106 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN) 107 #define SC1810C_GET_STATE_F1 SC1810C_SET_STATE_F1 108 #define SC1810C_GET_STATE_F2 SC1810C_SET_STATE_F2 109 110 #define SC1810C_STATE_F1_IDX 2 111 #define SC1810C_STATE_F2_IDX 3 112 113 /* 114 * This packet includes mixer volumes and 115 * various other fields, it's an extended 116 * version of ctl_packet, with a and b 117 * being zero and different f1/f2. 118 */ 119 struct s1810c_state_packet { 120 u32 fields[63]; 121 }; 122 123 #define SC1810C_STATE_48V_SW 58 124 #define SC1810C_STATE_LINE_SW 59 125 #define SC1810C_STATE_MUTE_SW 60 126 #define SC1810C_STATE_AB_SW 62 127 128 struct s1810_mixer_state { 129 uint16_t seqnum; 130 struct mutex usb_mutex; 131 struct mutex data_mutex; 132 }; 133 134 static int 135 snd_s1810c_send_ctl_packet(struct usb_device *dev, u32 a, 136 u32 b, u32 c, u32 d, u32 e) 137 { 138 struct s1810c_ctl_packet pkt = { 0 }; 139 int ret = 0; 140 141 pkt.fixed1 = SC1810C_CMD_F1; 142 pkt.fixed2 = SC1810C_CMD_F2; 143 144 pkt.a = a; 145 pkt.b = b; 146 pkt.c = c; 147 pkt.d = d; 148 /* 149 * Value for settings 0/1 for this 150 * output channel is always 0 (probably because 151 * there is no ADAT output on 1810c) 152 */ 153 pkt.e = (c == 4) ? 0 : e; 154 155 ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 156 SC1810C_CMD_REQ, 157 SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt)); 158 if (ret < 0) { 159 dev_warn(&dev->dev, "could not send ctl packet\n"); 160 return ret; 161 } 162 return 0; 163 } 164 165 /* 166 * When opening Universal Control the program periodicaly 167 * sends and receives state packets for syncinc state between 168 * the device and the host. 169 * 170 * Note that if we send only the request to get data back we'll 171 * get an error, we need to first send an empty state packet and 172 * then ask to receive a filled. Their seqnumbers must also match. 173 */ 174 static int 175 snd_sc1810c_get_status_field(struct usb_device *dev, 176 u32 *field, int field_idx, uint16_t *seqnum) 177 { 178 struct s1810c_state_packet pkt_out = { { 0 } }; 179 struct s1810c_state_packet pkt_in = { { 0 } }; 180 int ret = 0; 181 182 pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1; 183 pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2; 184 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 185 SC1810C_SET_STATE_REQ, 186 SC1810C_SET_STATE_REQTYPE, 187 (*seqnum), 0, &pkt_out, sizeof(pkt_out)); 188 if (ret < 0) { 189 dev_warn(&dev->dev, "could not send state packet (%d)\n", ret); 190 return ret; 191 } 192 193 ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 194 SC1810C_GET_STATE_REQ, 195 SC1810C_GET_STATE_REQTYPE, 196 (*seqnum), 0, &pkt_in, sizeof(pkt_in)); 197 if (ret < 0) { 198 dev_warn(&dev->dev, "could not get state field %u (%d)\n", 199 field_idx, ret); 200 return ret; 201 } 202 203 (*field) = pkt_in.fields[field_idx]; 204 (*seqnum)++; 205 return 0; 206 } 207 208 /* 209 * This is what I got when bypassing the mixer with 210 * all channels split. I'm not 100% sure of what's going 211 * on, I could probably clean this up based on my observations 212 * but I prefer to keep the same behavior as the windows driver. 213 */ 214 static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip) 215 { 216 u32 a, b, c, e, n, off; 217 struct usb_device *dev = chip->dev; 218 219 /* Set initial volume levels ? */ 220 a = 0x64; 221 e = 0xbc; 222 for (n = 0; n < 2; n++) { 223 off = n * 18; 224 for (b = off, c = 0; b < 18 + off; b++) { 225 /* This channel to all outputs ? */ 226 for (c = 0; c <= 8; c++) { 227 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); 228 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); 229 } 230 /* This channel to main output (again) */ 231 snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); 232 snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); 233 } 234 /* 235 * I noticed on UC that DAW channels have different 236 * initial volumes, so this makes sense. 237 */ 238 e = 0xb53bf0; 239 } 240 241 /* Connect analog outputs ? */ 242 a = 0x65; 243 e = 0x01000000; 244 for (b = 1; b < 3; b++) { 245 snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); 246 snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); 247 } 248 snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e); 249 snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e); 250 251 /* Set initial volume levels for S/PDIF mappings ? */ 252 a = 0x64; 253 e = 0xbc; 254 c = 3; 255 for (n = 0; n < 2; n++) { 256 off = n * 18; 257 for (b = off; b < 18 + off; b++) { 258 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); 259 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); 260 } 261 e = 0xb53bf0; 262 } 263 264 /* Connect S/PDIF output ? */ 265 a = 0x65; 266 e = 0x01000000; 267 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); 268 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); 269 270 /* Connect all outputs (again) ? */ 271 a = 0x65; 272 e = 0x01000000; 273 for (b = 0; b < 4; b++) { 274 snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); 275 snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); 276 } 277 278 /* Basic routing to get sound out of the device */ 279 a = 0x64; 280 e = 0x01000000; 281 for (c = 0; c < 4; c++) { 282 for (b = 0; b < 36; b++) { 283 if ((c == 0 && b == 18) || /* DAW1/2 -> Main */ 284 (c == 1 && b == 20) || /* DAW3/4 -> Line3/4 */ 285 (c == 2 && b == 22) || /* DAW4/5 -> Line5/6 */ 286 (c == 3 && b == 24)) { /* DAW5/6 -> S/PDIF */ 287 /* Left */ 288 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); 289 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); 290 b++; 291 /* Right */ 292 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); 293 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); 294 } else { 295 /* Leave the rest disconnected */ 296 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); 297 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); 298 } 299 } 300 } 301 302 /* Set initial volume levels for S/PDIF (again) ? */ 303 a = 0x64; 304 e = 0xbc; 305 c = 3; 306 for (n = 0; n < 2; n++) { 307 off = n * 18; 308 for (b = off; b < 18 + off; b++) { 309 snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); 310 snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); 311 } 312 e = 0xb53bf0; 313 } 314 315 /* Connect S/PDIF outputs (again) ? */ 316 a = 0x65; 317 e = 0x01000000; 318 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); 319 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); 320 321 /* Again ? */ 322 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); 323 snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); 324 325 return 0; 326 } 327 328 /* 329 * Sync state with the device and retrieve the requested field, 330 * whose index is specified in (kctl->private_value & 0xFF), 331 * from the received fields array. 332 */ 333 static int 334 snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer, 335 struct snd_kcontrol *kctl, u32 *state) 336 { 337 struct snd_usb_audio *chip = mixer->chip; 338 struct s1810_mixer_state *private = mixer->private_data; 339 u32 field = 0; 340 u32 ctl_idx = (u32) (kctl->private_value & 0xFF); 341 int ret = 0; 342 343 mutex_lock(&private->usb_mutex); 344 ret = snd_sc1810c_get_status_field(chip->dev, &field, 345 ctl_idx, &private->seqnum); 346 if (ret < 0) 347 goto unlock; 348 349 *state = field; 350 unlock: 351 mutex_unlock(&private->usb_mutex); 352 return ret ? ret : 0; 353 } 354 355 /* 356 * Send a control packet to the device for the control id 357 * specified in (kctl->private_value >> 8) with value 358 * specified in (kctl->private_value >> 16). 359 */ 360 static int 361 snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer, 362 struct snd_kcontrol *kctl) 363 { 364 struct snd_usb_audio *chip = mixer->chip; 365 struct s1810_mixer_state *private = mixer->private_data; 366 u32 pval = (u32) kctl->private_value; 367 u32 ctl_id = (pval >> 8) & 0xFF; 368 u32 ctl_val = (pval >> 16) & 0x1; 369 int ret = 0; 370 371 mutex_lock(&private->usb_mutex); 372 ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val); 373 mutex_unlock(&private->usb_mutex); 374 return ret; 375 } 376 377 /* Generic get/set/init functions for switch controls */ 378 379 static int 380 snd_s1810c_switch_get(struct snd_kcontrol *kctl, 381 struct snd_ctl_elem_value *ctl_elem) 382 { 383 struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); 384 struct usb_mixer_interface *mixer = list->mixer; 385 struct s1810_mixer_state *private = mixer->private_data; 386 u32 pval = (u32) kctl->private_value; 387 u32 ctl_idx = pval & 0xFF; 388 u32 state = 0; 389 int ret = 0; 390 391 mutex_lock(&private->data_mutex); 392 ret = snd_s1810c_get_switch_state(mixer, kctl, &state); 393 if (ret < 0) 394 goto unlock; 395 396 switch (ctl_idx) { 397 case SC1810C_STATE_LINE_SW: 398 case SC1810C_STATE_AB_SW: 399 ctl_elem->value.enumerated.item[0] = (int)state; 400 break; 401 default: 402 ctl_elem->value.integer.value[0] = (long)state; 403 } 404 405 unlock: 406 mutex_unlock(&private->data_mutex); 407 return (ret < 0) ? ret : 0; 408 } 409 410 static int 411 snd_s1810c_switch_set(struct snd_kcontrol *kctl, 412 struct snd_ctl_elem_value *ctl_elem) 413 { 414 struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); 415 struct usb_mixer_interface *mixer = list->mixer; 416 struct s1810_mixer_state *private = mixer->private_data; 417 u32 pval = (u32) kctl->private_value; 418 u32 ctl_idx = pval & 0xFF; 419 u32 curval = 0; 420 u32 newval = 0; 421 int ret = 0; 422 423 mutex_lock(&private->data_mutex); 424 ret = snd_s1810c_get_switch_state(mixer, kctl, &curval); 425 if (ret < 0) 426 goto unlock; 427 428 switch (ctl_idx) { 429 case SC1810C_STATE_LINE_SW: 430 case SC1810C_STATE_AB_SW: 431 newval = (u32) ctl_elem->value.enumerated.item[0]; 432 break; 433 default: 434 newval = (u32) ctl_elem->value.integer.value[0]; 435 } 436 437 if (curval == newval) 438 goto unlock; 439 440 kctl->private_value &= ~(0x1 << 16); 441 kctl->private_value |= (unsigned int)(newval & 0x1) << 16; 442 ret = snd_s1810c_set_switch_state(mixer, kctl); 443 444 unlock: 445 mutex_unlock(&private->data_mutex); 446 return (ret < 0) ? 0 : 1; 447 } 448 449 static int 450 snd_s1810c_switch_init(struct usb_mixer_interface *mixer, 451 const struct snd_kcontrol_new *new_kctl) 452 { 453 struct snd_kcontrol *kctl; 454 struct usb_mixer_elem_info *elem; 455 456 elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL); 457 if (!elem) 458 return -ENOMEM; 459 460 elem->head.mixer = mixer; 461 elem->control = 0; 462 elem->head.id = 0; 463 elem->channels = 1; 464 465 kctl = snd_ctl_new1(new_kctl, elem); 466 if (!kctl) { 467 kfree(elem); 468 return -ENOMEM; 469 } 470 kctl->private_free = snd_usb_mixer_elem_free; 471 472 return snd_usb_mixer_add_control(&elem->head, kctl); 473 } 474 475 static int 476 snd_s1810c_line_sw_info(struct snd_kcontrol *kctl, 477 struct snd_ctl_elem_info *uinfo) 478 { 479 static const char *const texts[2] = { 480 "Preamp On (Mic/Inst)", 481 "Preamp Off (Line in)" 482 }; 483 484 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); 485 } 486 487 static const struct snd_kcontrol_new snd_s1810c_line_sw = { 488 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 489 .name = "Line 1/2 Source Type", 490 .info = snd_s1810c_line_sw_info, 491 .get = snd_s1810c_switch_get, 492 .put = snd_s1810c_switch_set, 493 .private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8) 494 }; 495 496 static const struct snd_kcontrol_new snd_s1810c_mute_sw = { 497 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 498 .name = "Mute Main Out Switch", 499 .info = snd_ctl_boolean_mono_info, 500 .get = snd_s1810c_switch_get, 501 .put = snd_s1810c_switch_set, 502 .private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8) 503 }; 504 505 static const struct snd_kcontrol_new snd_s1810c_48v_sw = { 506 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 507 .name = "48V Phantom Power On Mic Inputs Switch", 508 .info = snd_ctl_boolean_mono_info, 509 .get = snd_s1810c_switch_get, 510 .put = snd_s1810c_switch_set, 511 .private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8) 512 }; 513 514 static int 515 snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl, 516 struct snd_ctl_elem_info *uinfo) 517 { 518 static const char *const texts[2] = { 519 "1/2", 520 "3/4" 521 }; 522 523 return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); 524 } 525 526 static const struct snd_kcontrol_new snd_s1810c_ab_sw = { 527 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 528 .name = "Headphone 1 Source Route", 529 .info = snd_s1810c_ab_sw_info, 530 .get = snd_s1810c_switch_get, 531 .put = snd_s1810c_switch_set, 532 .private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8) 533 }; 534 535 static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer) 536 { 537 struct s1810_mixer_state *private = mixer->private_data; 538 kfree(private); 539 mixer->private_data = NULL; 540 } 541 542 /* Entry point, called from mixer_quirks.c */ 543 int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer) 544 { 545 struct s1810_mixer_state *private = NULL; 546 struct snd_usb_audio *chip = mixer->chip; 547 struct usb_device *dev = chip->dev; 548 int ret = 0; 549 550 /* Run this only once */ 551 if (!list_empty(&chip->mixer_list)) 552 return 0; 553 554 dev_info(&dev->dev, 555 "Presonus Studio 1810c, device_setup: %u\n", chip->setup); 556 if (chip->setup == 1) 557 dev_info(&dev->dev, "(8out/18in @ 48kHz)\n"); 558 else if (chip->setup == 2) 559 dev_info(&dev->dev, "(6out/8in @ 192kHz)\n"); 560 else 561 dev_info(&dev->dev, "(8out/14in @ 96kHz)\n"); 562 563 ret = snd_s1810c_init_mixer_maps(chip); 564 if (ret < 0) 565 return ret; 566 567 private = kzalloc(sizeof(struct s1810_mixer_state), GFP_KERNEL); 568 if (!private) 569 return -ENOMEM; 570 571 mutex_init(&private->usb_mutex); 572 mutex_init(&private->data_mutex); 573 574 mixer->private_data = private; 575 mixer->private_free = snd_sc1810_mixer_state_free; 576 577 private->seqnum = 1; 578 579 ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw); 580 if (ret < 0) 581 return ret; 582 583 ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw); 584 if (ret < 0) 585 return ret; 586 587 ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw); 588 if (ret < 0) 589 return ret; 590 591 ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw); 592 if (ret < 0) 593 return ret; 594 return ret; 595 } 596