1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Line 6 Linux USB driver 4 * 5 * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) 6 */ 7 8 #include <linux/slab.h> 9 #include <linux/wait.h> 10 #include <linux/interrupt.h> 11 #include <linux/module.h> 12 #include <linux/usb.h> 13 14 #include <sound/core.h> 15 #include <sound/control.h> 16 17 #include "capture.h" 18 #include "driver.h" 19 #include "playback.h" 20 21 /* 22 Locate name in binary program dump 23 */ 24 #define POD_NAME_OFFSET 0 25 #define POD_NAME_LENGTH 16 26 27 /* 28 Other constants 29 */ 30 #define POD_CONTROL_SIZE 0x80 31 #define POD_BUFSIZE_DUMPREQ 7 32 #define POD_STARTUP_DELAY 1000 33 34 /* 35 Stages of POD startup procedure 36 */ 37 enum { 38 POD_STARTUP_VERSIONREQ, 39 POD_STARTUP_SETUP, 40 POD_STARTUP_DONE, 41 }; 42 43 enum { 44 LINE6_BASSPODXT, 45 LINE6_BASSPODXTLIVE, 46 LINE6_BASSPODXTPRO, 47 LINE6_POCKETPOD, 48 LINE6_PODXT, 49 LINE6_PODXTLIVE_POD, 50 LINE6_PODXTPRO, 51 }; 52 53 struct usb_line6_pod { 54 /* Generic Line 6 USB data */ 55 struct usb_line6 line6; 56 57 /* Instrument monitor level */ 58 int monitor_level; 59 60 /* Current progress in startup procedure */ 61 int startup_progress; 62 63 /* Serial number of device */ 64 u32 serial_number; 65 66 /* Firmware version (x 100) */ 67 int firmware_version; 68 69 /* Device ID */ 70 int device_id; 71 }; 72 73 #define line6_to_pod(x) container_of(x, struct usb_line6_pod, line6) 74 75 #define POD_SYSEX_CODE 3 76 77 /* *INDENT-OFF* */ 78 79 enum { 80 POD_SYSEX_SAVE = 0x24, 81 POD_SYSEX_SYSTEM = 0x56, 82 POD_SYSEX_SYSTEMREQ = 0x57, 83 /* POD_SYSEX_UPDATE = 0x6c, */ /* software update! */ 84 POD_SYSEX_STORE = 0x71, 85 POD_SYSEX_FINISH = 0x72, 86 POD_SYSEX_DUMPMEM = 0x73, 87 POD_SYSEX_DUMP = 0x74, 88 POD_SYSEX_DUMPREQ = 0x75 89 90 /* dumps entire internal memory of PODxt Pro */ 91 /* POD_SYSEX_DUMPMEM2 = 0x76 */ 92 }; 93 94 enum { 95 POD_MONITOR_LEVEL = 0x04, 96 POD_SYSTEM_INVALID = 0x10000 97 }; 98 99 /* *INDENT-ON* */ 100 101 enum { 102 POD_DUMP_MEMORY = 2 103 }; 104 105 enum { 106 POD_BUSY_READ, 107 POD_BUSY_WRITE, 108 POD_CHANNEL_DIRTY, 109 POD_SAVE_PRESSED, 110 POD_BUSY_MIDISEND 111 }; 112 113 static struct snd_ratden pod_ratden = { 114 .num_min = 78125, 115 .num_max = 78125, 116 .num_step = 1, 117 .den = 2 118 }; 119 120 static struct line6_pcm_properties pod_pcm_properties = { 121 .playback_hw = { 122 .info = (SNDRV_PCM_INFO_MMAP | 123 SNDRV_PCM_INFO_INTERLEAVED | 124 SNDRV_PCM_INFO_BLOCK_TRANSFER | 125 SNDRV_PCM_INFO_MMAP_VALID | 126 SNDRV_PCM_INFO_PAUSE | 127 SNDRV_PCM_INFO_SYNC_START), 128 .formats = SNDRV_PCM_FMTBIT_S24_3LE, 129 .rates = SNDRV_PCM_RATE_KNOT, 130 .rate_min = 39062, 131 .rate_max = 39063, 132 .channels_min = 2, 133 .channels_max = 2, 134 .buffer_bytes_max = 60000, 135 .period_bytes_min = 64, 136 .period_bytes_max = 8192, 137 .periods_min = 1, 138 .periods_max = 1024}, 139 .capture_hw = { 140 .info = (SNDRV_PCM_INFO_MMAP | 141 SNDRV_PCM_INFO_INTERLEAVED | 142 SNDRV_PCM_INFO_BLOCK_TRANSFER | 143 SNDRV_PCM_INFO_MMAP_VALID | 144 SNDRV_PCM_INFO_SYNC_START), 145 .formats = SNDRV_PCM_FMTBIT_S24_3LE, 146 .rates = SNDRV_PCM_RATE_KNOT, 147 .rate_min = 39062, 148 .rate_max = 39063, 149 .channels_min = 2, 150 .channels_max = 2, 151 .buffer_bytes_max = 60000, 152 .period_bytes_min = 64, 153 .period_bytes_max = 8192, 154 .periods_min = 1, 155 .periods_max = 1024}, 156 .rates = { 157 .nrats = 1, 158 .rats = &pod_ratden}, 159 .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ 160 }; 161 162 static const char pod_version_header[] = { 163 0xf2, 0x7e, 0x7f, 0x06, 0x02 164 }; 165 166 static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, 167 int size) 168 { 169 return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, 170 size); 171 } 172 173 /* 174 Process a completely received message. 175 */ 176 static void line6_pod_process_message(struct usb_line6 *line6) 177 { 178 struct usb_line6_pod *pod = line6_to_pod(line6); 179 const unsigned char *buf = pod->line6.buffer_message; 180 181 if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) { 182 pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15]; 183 pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | 184 (int) buf[10]; 185 if (pod->startup_progress == POD_STARTUP_VERSIONREQ) { 186 pod->startup_progress = POD_STARTUP_SETUP; 187 schedule_delayed_work(&line6->startup_work, 0); 188 } 189 return; 190 } 191 192 /* Only look for sysex messages from this device */ 193 if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) && 194 buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) { 195 return; 196 } 197 if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0) 198 return; 199 200 if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) { 201 short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) | 202 ((int)buf[9] << 4) | (int)buf[10]; 203 pod->monitor_level = value; 204 } 205 } 206 207 /* 208 Send system parameter (from integer). 209 */ 210 static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, 211 int code) 212 { 213 char *sysex; 214 static const int size = 5; 215 216 sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size); 217 if (!sysex) 218 return -ENOMEM; 219 sysex[SYSEX_DATA_OFS] = code; 220 sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f; 221 sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f; 222 sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f; 223 sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f; 224 line6_send_sysex_message(&pod->line6, sysex, size); 225 kfree(sysex); 226 return 0; 227 } 228 229 /* 230 "read" request on "serial_number" special file. 231 */ 232 static ssize_t serial_number_show(struct device *dev, 233 struct device_attribute *attr, char *buf) 234 { 235 struct snd_card *card = dev_to_snd_card(dev); 236 struct usb_line6_pod *pod = card->private_data; 237 238 return sprintf(buf, "%u\n", pod->serial_number); 239 } 240 241 /* 242 "read" request on "firmware_version" special file. 243 */ 244 static ssize_t firmware_version_show(struct device *dev, 245 struct device_attribute *attr, char *buf) 246 { 247 struct snd_card *card = dev_to_snd_card(dev); 248 struct usb_line6_pod *pod = card->private_data; 249 250 return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100, 251 pod->firmware_version % 100); 252 } 253 254 /* 255 "read" request on "device_id" special file. 256 */ 257 static ssize_t device_id_show(struct device *dev, 258 struct device_attribute *attr, char *buf) 259 { 260 struct snd_card *card = dev_to_snd_card(dev); 261 struct usb_line6_pod *pod = card->private_data; 262 263 return sprintf(buf, "%d\n", pod->device_id); 264 } 265 266 /* 267 POD startup procedure. 268 This is a sequence of functions with special requirements (e.g., must 269 not run immediately after initialization, must not run in interrupt 270 context). After the last one has finished, the device is ready to use. 271 */ 272 273 static void pod_startup(struct usb_line6 *line6) 274 { 275 struct usb_line6_pod *pod = line6_to_pod(line6); 276 277 switch (pod->startup_progress) { 278 case POD_STARTUP_VERSIONREQ: 279 /* request firmware version: */ 280 line6_version_request_async(line6); 281 break; 282 case POD_STARTUP_SETUP: 283 /* serial number: */ 284 line6_read_serial_number(&pod->line6, &pod->serial_number); 285 286 /* ALSA audio interface: */ 287 if (snd_card_register(line6->card)) 288 dev_err(line6->ifcdev, "Failed to register POD card.\n"); 289 pod->startup_progress = POD_STARTUP_DONE; 290 break; 291 default: 292 break; 293 } 294 } 295 296 /* POD special files: */ 297 static DEVICE_ATTR_RO(device_id); 298 static DEVICE_ATTR_RO(firmware_version); 299 static DEVICE_ATTR_RO(serial_number); 300 301 static struct attribute *pod_dev_attrs[] = { 302 &dev_attr_device_id.attr, 303 &dev_attr_firmware_version.attr, 304 &dev_attr_serial_number.attr, 305 NULL 306 }; 307 308 static const struct attribute_group pod_dev_attr_group = { 309 .name = "pod", 310 .attrs = pod_dev_attrs, 311 }; 312 313 /* control info callback */ 314 static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol, 315 struct snd_ctl_elem_info *uinfo) 316 { 317 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; 318 uinfo->count = 1; 319 uinfo->value.integer.min = 0; 320 uinfo->value.integer.max = 65535; 321 return 0; 322 } 323 324 /* control get callback */ 325 static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol, 326 struct snd_ctl_elem_value *ucontrol) 327 { 328 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); 329 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6); 330 331 ucontrol->value.integer.value[0] = pod->monitor_level; 332 return 0; 333 } 334 335 /* control put callback */ 336 static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol, 337 struct snd_ctl_elem_value *ucontrol) 338 { 339 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); 340 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6); 341 342 if (ucontrol->value.integer.value[0] == pod->monitor_level) 343 return 0; 344 345 pod->monitor_level = ucontrol->value.integer.value[0]; 346 pod_set_system_param_int(pod, ucontrol->value.integer.value[0], 347 POD_MONITOR_LEVEL); 348 return 1; 349 } 350 351 /* control definition */ 352 static const struct snd_kcontrol_new pod_control_monitor = { 353 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 354 .name = "Monitor Playback Volume", 355 .index = 0, 356 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, 357 .info = snd_pod_control_monitor_info, 358 .get = snd_pod_control_monitor_get, 359 .put = snd_pod_control_monitor_put 360 }; 361 362 /* 363 Try to init POD device. 364 */ 365 static int pod_init(struct usb_line6 *line6, 366 const struct usb_device_id *id) 367 { 368 int err; 369 struct usb_line6_pod *pod = line6_to_pod(line6); 370 371 line6->process_message = line6_pod_process_message; 372 line6->startup = pod_startup; 373 374 /* create sysfs entries: */ 375 err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group); 376 if (err < 0) 377 return err; 378 379 /* initialize MIDI subsystem: */ 380 err = line6_init_midi(line6); 381 if (err < 0) 382 return err; 383 384 /* initialize PCM subsystem: */ 385 err = line6_init_pcm(line6, &pod_pcm_properties); 386 if (err < 0) 387 return err; 388 389 /* register monitor control: */ 390 err = snd_ctl_add(line6->card, 391 snd_ctl_new1(&pod_control_monitor, line6->line6pcm)); 392 if (err < 0) 393 return err; 394 395 /* 396 When the sound card is registered at this point, the PODxt Live 397 displays "Invalid Code Error 07", so we do it later in the event 398 handler. 399 */ 400 401 if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) { 402 pod->monitor_level = POD_SYSTEM_INVALID; 403 404 /* initiate startup procedure: */ 405 schedule_delayed_work(&line6->startup_work, 406 msecs_to_jiffies(POD_STARTUP_DELAY)); 407 } 408 409 return 0; 410 } 411 412 #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod) 413 #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n) 414 415 /* table of devices that work with this driver */ 416 static const struct usb_device_id pod_id_table[] = { 417 { LINE6_DEVICE(0x4250), .driver_info = LINE6_BASSPODXT }, 418 { LINE6_DEVICE(0x4642), .driver_info = LINE6_BASSPODXTLIVE }, 419 { LINE6_DEVICE(0x4252), .driver_info = LINE6_BASSPODXTPRO }, 420 { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD }, 421 { LINE6_DEVICE(0x5044), .driver_info = LINE6_PODXT }, 422 { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD }, 423 { LINE6_DEVICE(0x5050), .driver_info = LINE6_PODXTPRO }, 424 {} 425 }; 426 427 MODULE_DEVICE_TABLE(usb, pod_id_table); 428 429 static const struct line6_properties pod_properties_table[] = { 430 [LINE6_BASSPODXT] = { 431 .id = "BassPODxt", 432 .name = "BassPODxt", 433 .capabilities = LINE6_CAP_CONTROL 434 | LINE6_CAP_CONTROL_MIDI 435 | LINE6_CAP_PCM 436 | LINE6_CAP_HWMON, 437 .altsetting = 5, 438 .ep_ctrl_r = 0x84, 439 .ep_ctrl_w = 0x03, 440 .ep_audio_r = 0x82, 441 .ep_audio_w = 0x01, 442 }, 443 [LINE6_BASSPODXTLIVE] = { 444 .id = "BassPODxtLive", 445 .name = "BassPODxt Live", 446 .capabilities = LINE6_CAP_CONTROL 447 | LINE6_CAP_CONTROL_MIDI 448 | LINE6_CAP_PCM 449 | LINE6_CAP_HWMON, 450 .altsetting = 1, 451 .ep_ctrl_r = 0x84, 452 .ep_ctrl_w = 0x03, 453 .ep_audio_r = 0x82, 454 .ep_audio_w = 0x01, 455 }, 456 [LINE6_BASSPODXTPRO] = { 457 .id = "BassPODxtPro", 458 .name = "BassPODxt Pro", 459 .capabilities = LINE6_CAP_CONTROL 460 | LINE6_CAP_CONTROL_MIDI 461 | LINE6_CAP_PCM 462 | LINE6_CAP_HWMON, 463 .altsetting = 5, 464 .ep_ctrl_r = 0x84, 465 .ep_ctrl_w = 0x03, 466 .ep_audio_r = 0x82, 467 .ep_audio_w = 0x01, 468 }, 469 [LINE6_POCKETPOD] = { 470 .id = "PocketPOD", 471 .name = "Pocket POD", 472 .capabilities = LINE6_CAP_CONTROL 473 | LINE6_CAP_CONTROL_MIDI, 474 .altsetting = 0, 475 .ep_ctrl_r = 0x82, 476 .ep_ctrl_w = 0x02, 477 /* no audio channel */ 478 }, 479 [LINE6_PODXT] = { 480 .id = "PODxt", 481 .name = "PODxt", 482 .capabilities = LINE6_CAP_CONTROL 483 | LINE6_CAP_CONTROL_MIDI 484 | LINE6_CAP_PCM 485 | LINE6_CAP_HWMON, 486 .altsetting = 5, 487 .ep_ctrl_r = 0x84, 488 .ep_ctrl_w = 0x03, 489 .ep_audio_r = 0x82, 490 .ep_audio_w = 0x01, 491 }, 492 [LINE6_PODXTLIVE_POD] = { 493 .id = "PODxtLive", 494 .name = "PODxt Live", 495 .capabilities = LINE6_CAP_CONTROL 496 | LINE6_CAP_CONTROL_MIDI 497 | LINE6_CAP_PCM 498 | LINE6_CAP_HWMON, 499 .altsetting = 1, 500 .ep_ctrl_r = 0x84, 501 .ep_ctrl_w = 0x03, 502 .ep_audio_r = 0x82, 503 .ep_audio_w = 0x01, 504 }, 505 [LINE6_PODXTPRO] = { 506 .id = "PODxtPro", 507 .name = "PODxt Pro", 508 .capabilities = LINE6_CAP_CONTROL 509 | LINE6_CAP_CONTROL_MIDI 510 | LINE6_CAP_PCM 511 | LINE6_CAP_HWMON, 512 .altsetting = 5, 513 .ep_ctrl_r = 0x84, 514 .ep_ctrl_w = 0x03, 515 .ep_audio_r = 0x82, 516 .ep_audio_w = 0x01, 517 }, 518 }; 519 520 /* 521 Probe USB device. 522 */ 523 static int pod_probe(struct usb_interface *interface, 524 const struct usb_device_id *id) 525 { 526 return line6_probe(interface, id, "Line6-POD", 527 &pod_properties_table[id->driver_info], 528 pod_init, sizeof(struct usb_line6_pod)); 529 } 530 531 static struct usb_driver pod_driver = { 532 .name = KBUILD_MODNAME, 533 .probe = pod_probe, 534 .disconnect = line6_disconnect, 535 #ifdef CONFIG_PM 536 .suspend = line6_suspend, 537 .resume = line6_resume, 538 .reset_resume = line6_resume, 539 #endif 540 .id_table = pod_id_table, 541 }; 542 543 module_usb_driver(pod_driver); 544 545 MODULE_DESCRIPTION("Line 6 POD USB driver"); 546 MODULE_LICENSE("GPL"); 547