xref: /openbmc/linux/sound/usb/Kconfig (revision 97e6f135) 
1# SPDX-License-Identifier: GPL-2.0-only
2# ALSA USB drivers
3
4menuconfig SND_USB
5	bool "USB sound devices"
6	depends on USB
7	default y
8	help
9	  Support for sound devices connected via the USB bus.
10
11if SND_USB && USB
12
13config SND_USB_AUDIO
14	tristate "USB Audio/MIDI driver"
15	select SND_HWDEP
16	select SND_RAWMIDI
17	select SND_PCM
18	select SND_UMP if SND_USB_AUDIO_MIDI_V2
19	select BITREVERSE
20	select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER && (MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
21	help
22	  Say Y here to include support for USB audio and USB MIDI
23	  devices.
24
25	  To compile this driver as a module, choose M here: the module
26	  will be called snd-usb-audio.
27
28config SND_USB_AUDIO_MIDI_V2
29	bool "MIDI 2.0 support by USB Audio driver"
30	depends on SND_USB_AUDIO
31	help
32	  Say Y here to include the support for MIDI 2.0 by USB Audio driver.
33	  When the config is set, the driver tries to probe MIDI 2.0 interface
34	  at first, then falls back to MIDI 1.0 interface as default.
35	  The MIDI 2.0 support can be disabled dynamically via midi2_enable
36	  module option, too.
37
38config SND_USB_AUDIO_USE_MEDIA_CONTROLLER
39	bool
40
41config SND_USB_UA101
42	tristate "Edirol UA-101/UA-1000 driver"
43	select SND_PCM
44	select SND_RAWMIDI
45	help
46	  Say Y here to include support for the Edirol UA-101 and UA-1000
47	  audio/MIDI interfaces.
48
49	  To compile this driver as a module, choose M here: the module
50	  will be called snd-ua101.
51
52config SND_USB_USX2Y
53	tristate "Tascam US-122, US-224 and US-428 USB driver"
54	depends on X86 || PPC || ALPHA
55	select SND_HWDEP
56	select SND_RAWMIDI
57	select SND_PCM
58	help
59	  Say Y here to include support for Tascam USB Audio/MIDI
60	  interfaces or controllers US-122, US-224 and US-428.
61
62	  To compile this driver as a module, choose M here: the module
63	  will be called snd-usb-usx2y.
64
65config SND_USB_CAIAQ
66	tristate "Native Instruments USB audio devices"
67	select SND_HWDEP
68	select SND_RAWMIDI
69	select SND_PCM
70	help
71	   Say Y here to include support for caiaq USB audio interfaces,
72	   namely:
73
74	    * Native Instruments RigKontrol2
75	    * Native Instruments RigKontrol3
76	    * Native Instruments Kore Controller
77	    * Native Instruments Kore Controller 2
78	    * Native Instruments Audio Kontrol 1
79	    * Native Instruments Audio 2 DJ
80	    * Native Instruments Audio 4 DJ
81	    * Native Instruments Audio 8 DJ
82	    * Native Instruments Traktor Audio 2
83	    * Native Instruments Guitar Rig Session I/O
84	    * Native Instruments Guitar Rig mobile
85	    * Native Instruments Traktor Kontrol X1
86	    * Native Instruments Traktor Kontrol S4
87	    * Native Instruments Maschine Controller
88
89	   To compile this driver as a module, choose M here: the module
90	   will be called snd-usb-caiaq.
91
92config SND_USB_CAIAQ_INPUT
93	bool "enable input device for controllers"
94	depends on SND_USB_CAIAQ
95	depends on INPUT=y || INPUT=SND_USB_CAIAQ
96	help
97	  Say Y here to support input controllers like buttons, knobs,
98	  alpha dials and analog pedals on the following products:
99
100	   * Native Instruments RigKontrol2
101	   * Native Instruments RigKontrol3
102	   * Native Instruments Kore Controller
103	   * Native Instruments Kore Controller 2
104	   * Native Instruments Audio Kontrol 1
105	   * Native Instruments Traktor Kontrol S4
106	   * Native Instruments Maschine Controller
107
108config SND_USB_US122L
109	tristate "Tascam US-122L USB driver"
110	depends on X86 || COMPILE_TEST
111	select SND_HWDEP
112	select SND_RAWMIDI
113	help
114	  Say Y here to include support for Tascam US-122L USB Audio/MIDI
115	  interfaces.
116
117	  To compile this driver as a module, choose M here: the module
118	  will be called snd-usb-us122l.
119
120config SND_USB_6FIRE
121	tristate "TerraTec DMX 6Fire USB"
122	select FW_LOADER
123	select BITREVERSE
124	select SND_RAWMIDI
125	select SND_PCM
126	select SND_VMASTER
127	help
128	  Say Y here to include support for TerraTec 6fire DMX USB interface.
129
130	  You will need firmware files in order to be able to use the device
131	  after it has been coldstarted. An install script for the firmware
132	  and further help can be found at
133	  http://sixfireusb.sourceforge.net
134
135config SND_USB_HIFACE
136	tristate "M2Tech hiFace USB-SPDIF driver"
137	select SND_PCM
138	help
139	  Select this option to include support for M2Tech hiFace USB-SPDIF
140	  interface.
141
142	  This driver supports the original M2Tech hiFace and some other
143	  compatible devices. The supported products are:
144
145	    * M2Tech Young
146	    * M2Tech hiFace
147	    * M2Tech North Star
148	    * M2Tech W4S Young
149	    * M2Tech Corrson
150	    * M2Tech AUDIA
151	    * M2Tech SL Audio
152	    * M2Tech Empirical
153	    * M2Tech Rockna
154	    * M2Tech Pathos
155	    * M2Tech Metronome
156	    * M2Tech CAD
157	    * M2Tech Audio Esclusive
158	    * M2Tech Rotel
159	    * M2Tech Eeaudio
160	    * The Chord Company CHORD
161	    * AVA Group A/S Vitus
162
163	  To compile this driver as a module, choose M here: the module
164	  will be called snd-usb-hiface.
165
166config SND_BCD2000
167	tristate "Behringer BCD2000 MIDI driver"
168	select SND_RAWMIDI
169	help
170	  Say Y here to include MIDI support for the Behringer BCD2000 DJ
171	  controller.
172
173	  Audio support is still work-in-progress at
174	  https://github.com/anyc/snd-usb-bcd2000
175
176	  To compile this driver as a module, choose M here: the module
177	  will be called snd-bcd2000.
178
179source "sound/usb/line6/Kconfig"
180
181endif	# SND_USB
182
183