xref: /openbmc/linux/sound/usb/6fire/firmware.c (revision 43ffe817)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Linux driver for TerraTec DMX 6Fire USB
4  *
5  * Firmware loader
6  *
7  * Author:	Torsten Schenk <torsten.schenk@zoho.com>
8  * Created:	Jan 01, 2011
9  * Copyright:	(C) Torsten Schenk
10  */
11 
12 #include <linux/firmware.h>
13 #include <linux/module.h>
14 #include <linux/bitrev.h>
15 #include <linux/kernel.h>
16 
17 #include "firmware.h"
18 #include "chip.h"
19 
20 MODULE_FIRMWARE("6fire/dmx6firel2.ihx");
21 MODULE_FIRMWARE("6fire/dmx6fireap.ihx");
22 MODULE_FIRMWARE("6fire/dmx6firecf.bin");
23 
24 enum {
25 	FPGA_BUFSIZE = 512, FPGA_EP = 2
26 };
27 
28 /*
29  * wMaxPacketSize of pcm endpoints.
30  * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c
31  * fpp: frames per isopacket
32  *
33  * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init
34  */
35 static const u8 ep_w_max_packet_size[] = {
36 	0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */
37 	0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/
38 	0x94, 0x01, 0x5c, 0x02  /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */
39 };
40 
41 static const u8 known_fw_versions[][2] = {
42 	{ 0x03, 0x01 }
43 };
44 
45 struct ihex_record {
46 	u16 address;
47 	u8 len;
48 	u8 data[256];
49 	char error; /* true if an error occurred parsing this record */
50 
51 	u8 max_len; /* maximum record length in whole ihex */
52 
53 	/* private */
54 	const char *txt_data;
55 	unsigned int txt_length;
56 	unsigned int txt_offset; /* current position in txt_data */
57 };
58 
59 static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc)
60 {
61 	u8 val = 0;
62 	int hval;
63 
64 	hval = hex_to_bin(data[0]);
65 	if (hval >= 0)
66 		val |= (hval << 4);
67 
68 	hval = hex_to_bin(data[1]);
69 	if (hval >= 0)
70 		val |= hval;
71 
72 	*crc += val;
73 	return val;
74 }
75 
76 /*
77  * returns true if record is available, false otherwise.
78  * iff an error occurred, false will be returned and record->error will be true.
79  */
80 static bool usb6fire_fw_ihex_next_record(struct ihex_record *record)
81 {
82 	u8 crc = 0;
83 	u8 type;
84 	int i;
85 
86 	record->error = false;
87 
88 	/* find begin of record (marked by a colon) */
89 	while (record->txt_offset < record->txt_length
90 			&& record->txt_data[record->txt_offset] != ':')
91 		record->txt_offset++;
92 	if (record->txt_offset == record->txt_length)
93 		return false;
94 
95 	/* number of characters needed for len, addr and type entries */
96 	record->txt_offset++;
97 	if (record->txt_offset + 8 > record->txt_length) {
98 		record->error = true;
99 		return false;
100 	}
101 
102 	record->len = usb6fire_fw_ihex_hex(record->txt_data +
103 			record->txt_offset, &crc);
104 	record->txt_offset += 2;
105 	record->address = usb6fire_fw_ihex_hex(record->txt_data +
106 			record->txt_offset, &crc) << 8;
107 	record->txt_offset += 2;
108 	record->address |= usb6fire_fw_ihex_hex(record->txt_data +
109 			record->txt_offset, &crc);
110 	record->txt_offset += 2;
111 	type = usb6fire_fw_ihex_hex(record->txt_data +
112 			record->txt_offset, &crc);
113 	record->txt_offset += 2;
114 
115 	/* number of characters needed for data and crc entries */
116 	if (record->txt_offset + 2 * (record->len + 1) > record->txt_length) {
117 		record->error = true;
118 		return false;
119 	}
120 	for (i = 0; i < record->len; i++) {
121 		record->data[i] = usb6fire_fw_ihex_hex(record->txt_data
122 				+ record->txt_offset, &crc);
123 		record->txt_offset += 2;
124 	}
125 	usb6fire_fw_ihex_hex(record->txt_data + record->txt_offset, &crc);
126 	if (crc) {
127 		record->error = true;
128 		return false;
129 	}
130 
131 	if (type == 1 || !record->len) /* eof */
132 		return false;
133 	else if (type == 0)
134 		return true;
135 	else {
136 		record->error = true;
137 		return false;
138 	}
139 }
140 
141 static int usb6fire_fw_ihex_init(const struct firmware *fw,
142 		struct ihex_record *record)
143 {
144 	record->txt_data = fw->data;
145 	record->txt_length = fw->size;
146 	record->txt_offset = 0;
147 	record->max_len = 0;
148 	/* read all records, if loop ends, record->error indicates,
149 	 * whether ihex is valid. */
150 	while (usb6fire_fw_ihex_next_record(record))
151 		record->max_len = max(record->len, record->max_len);
152 	if (record->error)
153 		return -EINVAL;
154 	record->txt_offset = 0;
155 	return 0;
156 }
157 
158 static int usb6fire_fw_ezusb_write(struct usb_device *device,
159 		int type, int value, char *data, int len)
160 {
161 	return usb_control_msg_send(device, 0, type,
162 				    USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
163 				    value, 0, data, len, HZ, GFP_KERNEL);
164 }
165 
166 static int usb6fire_fw_ezusb_read(struct usb_device *device,
167 		int type, int value, char *data, int len)
168 {
169 	return usb_control_msg_recv(device, 0, type,
170 				    USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
171 				    value, 0, data, len, HZ, GFP_KERNEL);
172 }
173 
174 static int usb6fire_fw_fpga_write(struct usb_device *device,
175 		char *data, int len)
176 {
177 	int actual_len;
178 	int ret;
179 
180 	ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
181 			&actual_len, HZ);
182 	if (ret < 0)
183 		return ret;
184 	else if (actual_len != len)
185 		return -EIO;
186 	return 0;
187 }
188 
189 static int usb6fire_fw_ezusb_upload(
190 		struct usb_interface *intf, const char *fwname,
191 		unsigned int postaddr, u8 *postdata, unsigned int postlen)
192 {
193 	int ret;
194 	u8 data;
195 	struct usb_device *device = interface_to_usbdev(intf);
196 	const struct firmware *fw = NULL;
197 	struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
198 			GFP_KERNEL);
199 
200 	if (!rec)
201 		return -ENOMEM;
202 
203 	ret = request_firmware(&fw, fwname, &device->dev);
204 	if (ret < 0) {
205 		kfree(rec);
206 		dev_err(&intf->dev,
207 			"error requesting ezusb firmware %s.\n", fwname);
208 		return ret;
209 	}
210 	ret = usb6fire_fw_ihex_init(fw, rec);
211 	if (ret < 0) {
212 		kfree(rec);
213 		release_firmware(fw);
214 		dev_err(&intf->dev,
215 			"error validating ezusb firmware %s.\n", fwname);
216 		return ret;
217 	}
218 	/* upload firmware image */
219 	data = 0x01; /* stop ezusb cpu */
220 	ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
221 	if (ret) {
222 		kfree(rec);
223 		release_firmware(fw);
224 		dev_err(&intf->dev,
225 			"unable to upload ezusb firmware %s: begin message.\n",
226 			fwname);
227 		return ret;
228 	}
229 
230 	while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */
231 		ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address,
232 				rec->data, rec->len);
233 		if (ret) {
234 			kfree(rec);
235 			release_firmware(fw);
236 			dev_err(&intf->dev,
237 				"unable to upload ezusb firmware %s: data urb.\n",
238 				fwname);
239 			return ret;
240 		}
241 	}
242 
243 	release_firmware(fw);
244 	kfree(rec);
245 	if (postdata) { /* write data after firmware has been uploaded */
246 		ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr,
247 				postdata, postlen);
248 		if (ret) {
249 			dev_err(&intf->dev,
250 				"unable to upload ezusb firmware %s: post urb.\n",
251 				fwname);
252 			return ret;
253 		}
254 	}
255 
256 	data = 0x00; /* resume ezusb cpu */
257 	ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
258 	if (ret) {
259 		dev_err(&intf->dev,
260 			"unable to upload ezusb firmware %s: end message.\n",
261 			fwname);
262 		return ret;
263 	}
264 	return 0;
265 }
266 
267 static int usb6fire_fw_fpga_upload(
268 		struct usb_interface *intf, const char *fwname)
269 {
270 	int ret;
271 	int i;
272 	struct usb_device *device = interface_to_usbdev(intf);
273 	u8 *buffer = kmalloc(FPGA_BUFSIZE, GFP_KERNEL);
274 	const char *c;
275 	const char *end;
276 	const struct firmware *fw;
277 
278 	if (!buffer)
279 		return -ENOMEM;
280 
281 	ret = request_firmware(&fw, fwname, &device->dev);
282 	if (ret < 0) {
283 		dev_err(&intf->dev, "unable to get fpga firmware %s.\n",
284 				fwname);
285 		kfree(buffer);
286 		return -EIO;
287 	}
288 
289 	c = fw->data;
290 	end = fw->data + fw->size;
291 
292 	ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0);
293 	if (ret) {
294 		kfree(buffer);
295 		release_firmware(fw);
296 		dev_err(&intf->dev,
297 			"unable to upload fpga firmware: begin urb.\n");
298 		return ret;
299 	}
300 
301 	while (c != end) {
302 		for (i = 0; c != end && i < FPGA_BUFSIZE; i++, c++)
303 			buffer[i] = bitrev8((u8)*c);
304 
305 		ret = usb6fire_fw_fpga_write(device, buffer, i);
306 		if (ret < 0) {
307 			release_firmware(fw);
308 			kfree(buffer);
309 			dev_err(&intf->dev,
310 				"unable to upload fpga firmware: fw urb.\n");
311 			return ret;
312 		}
313 	}
314 	release_firmware(fw);
315 	kfree(buffer);
316 
317 	ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0);
318 	if (ret) {
319 		dev_err(&intf->dev,
320 			"unable to upload fpga firmware: end urb.\n");
321 		return ret;
322 	}
323 	return 0;
324 }
325 
326 /* check, if the firmware version the devices has currently loaded
327  * is known by this driver. 'version' needs to have 4 bytes version
328  * info data. */
329 static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
330 {
331 	int i;
332 
333 	for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++)
334 		if (!memcmp(version, known_fw_versions + i, 2))
335 			return 0;
336 
337 	dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
338 			"please reconnect to power. if this failure "
339 			"still happens, check your firmware installation.",
340 			version);
341 	return -EINVAL;
342 }
343 
344 int usb6fire_fw_init(struct usb_interface *intf)
345 {
346 	int i;
347 	int ret;
348 	struct usb_device *device = interface_to_usbdev(intf);
349 	/* buffer: 8 receiving bytes from device and
350 	 * sizeof(EP_W_MAX_PACKET_SIZE) bytes for non-const copy */
351 	u8 buffer[12];
352 
353 	ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8);
354 	if (ret) {
355 		dev_err(&intf->dev,
356 			"unable to receive device firmware state.\n");
357 		return ret;
358 	}
359 	if (buffer[0] != 0xeb || buffer[1] != 0xaa || buffer[2] != 0x55) {
360 		dev_err(&intf->dev,
361 			"unknown device firmware state received from device:");
362 		for (i = 0; i < 8; i++)
363 			printk(KERN_CONT "%02x ", buffer[i]);
364 		printk(KERN_CONT "\n");
365 		return -EIO;
366 	}
367 	/* do we need fpga loader ezusb firmware? */
368 	if (buffer[3] == 0x01) {
369 		ret = usb6fire_fw_ezusb_upload(intf,
370 				"6fire/dmx6firel2.ihx", 0, NULL, 0);
371 		if (ret < 0)
372 			return ret;
373 		return FW_NOT_READY;
374 	}
375 	/* do we need fpga firmware and application ezusb firmware? */
376 	else if (buffer[3] == 0x02) {
377 		ret = usb6fire_fw_check(intf, buffer + 4);
378 		if (ret < 0)
379 			return ret;
380 		ret = usb6fire_fw_fpga_upload(intf, "6fire/dmx6firecf.bin");
381 		if (ret < 0)
382 			return ret;
383 		memcpy(buffer, ep_w_max_packet_size,
384 				sizeof(ep_w_max_packet_size));
385 		ret = usb6fire_fw_ezusb_upload(intf, "6fire/dmx6fireap.ihx",
386 				0x0003,	buffer, sizeof(ep_w_max_packet_size));
387 		if (ret < 0)
388 			return ret;
389 		return FW_NOT_READY;
390 	}
391 	/* all fw loaded? */
392 	else if (buffer[3] == 0x03)
393 		return usb6fire_fw_check(intf, buffer + 4);
394 	/* unknown data? */
395 	else {
396 		dev_err(&intf->dev,
397 			"unknown device firmware state received from device: ");
398 		for (i = 0; i < 8; i++)
399 			printk(KERN_CONT "%02x ", buffer[i]);
400 		printk(KERN_CONT "\n");
401 		return -EIO;
402 	}
403 	return 0;
404 }
405 
406