1# SPDX-License-Identifier: GPL-2.0-only 2menu "Audio support for Texas Instruments SoCs" 3depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST 4 5config SND_SOC_TI_EDMA_PCM 6 tristate 7 select SND_SOC_GENERIC_DMAENGINE_PCM 8 9config SND_SOC_TI_SDMA_PCM 10 tristate 11 select SND_SOC_GENERIC_DMAENGINE_PCM 12 13config SND_SOC_TI_UDMA_PCM 14 tristate 15 select SND_SOC_GENERIC_DMAENGINE_PCM 16 17comment "Texas Instruments DAI support for:" 18config SND_SOC_DAVINCI_ASP 19 tristate "daVinci Audio Serial Port (ASP) or McBSP support" 20 depends on ARCH_DAVINCI || COMPILE_TEST 21 select SND_SOC_TI_EDMA_PCM 22 help 23 Say Y or M here if you want audio support via daVinci ASP or McBSP. 24 The driver only implements the ASP support which is a subset of 25 daVinci McBSP (w/o the multichannel support). 26 27config SND_SOC_DAVINCI_MCASP 28 tristate "Multichannel Audio Serial Port (McASP) support" 29 select SND_SOC_TI_EDMA_PCM 30 select SND_SOC_TI_SDMA_PCM 31 select SND_SOC_TI_UDMA_PCM 32 help 33 Say Y or M here if you want to have support for McASP IP found in 34 various Texas Instruments SoCs like: 35 - daVinci devices 36 - Sitara line of SoCs (AM335x, AM438x, etc) 37 - DRA7x devices 38 - Keystone devices 39 - K3 devices (am654, j721e) 40 41config SND_SOC_DAVINCI_VCIF 42 tristate "daVinci Voice Interface (VCIF) support" 43 depends on ARCH_DAVINCI || COMPILE_TEST 44 select SND_SOC_TI_EDMA_PCM 45 help 46 Say Y or M here if you want audio support via daVinci VCIF. 47 48config SND_SOC_OMAP_DMIC 49 tristate "Digital Microphone Module (DMIC) support" 50 depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST 51 select SND_SOC_TI_SDMA_PCM 52 help 53 Say Y or M here if you want to have support for DMIC IP found in 54 OMAP4 and OMAP5. 55 56config SND_SOC_OMAP_MCBSP 57 tristate "Multichannel Buffered Serial Port (McBSP) support" 58 depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST 59 select SND_SOC_TI_SDMA_PCM 60 help 61 Say Y or M here if you want to have support for McBSP IP found in 62 Texas Instruments OMAP1/2/3/4/5 SoCs. 63 64config SND_SOC_OMAP_MCPDM 65 tristate "Multichannel PDM Controller (McPDM) support" 66 depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST 67 select SND_SOC_TI_SDMA_PCM 68 help 69 Say Y or M here if you want to have support for McPDM IP found in 70 OMAP4 and OMAP5. 71 72comment "Audio support for boards with Texas Instruments SoCs" 73config SND_SOC_NOKIA_N810 74 tristate "SoC Audio support for Nokia N810" 75 depends on MACH_NOKIA_N810 && I2C 76 select SND_SOC_OMAP_MCBSP 77 select SND_SOC_TLV320AIC3X 78 help 79 Say Y or M if you want to add support for SoC audio on Nokia N810. 80 81config SND_SOC_NOKIA_RX51 82 tristate "SoC Audio support for Nokia RX-51" 83 depends on ARCH_OMAP3 && I2C && GPIOLIB 84 select SND_SOC_OMAP_MCBSP 85 select SND_SOC_TLV320AIC3X 86 select SND_SOC_TPA6130A2 87 help 88 Say Y or M if you want to add support for SoC audio on Nokia RX-51 89 hardware. This is also known as Nokia N900 product. 90 91config SND_SOC_OMAP3_PANDORA 92 tristate "SoC Audio support for OMAP3 Pandora" 93 depends on ARCH_OMAP3 94 depends on TWL4030_CORE 95 select SND_SOC_OMAP_MCBSP 96 select SND_SOC_TWL4030 97 help 98 Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. 99 100config SND_SOC_OMAP3_TWL4030 101 tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" 102 depends on ARCH_OMAP3 || COMPILE_TEST 103 depends on TWL4030_CORE 104 select SND_SOC_OMAP_MCBSP 105 select SND_SOC_TWL4030 106 help 107 Say Y or M if you want to add support for SoC audio on OMAP3 based 108 boards using twl4030 as codec. This driver currently supports: 109 - Beagleboard or Devkit8000 110 - Gumstix Overo or CompuLab CM-T35/CM-T3730 111 - IGEP v2 112 - OMAP3EVM 113 - SDP3430 114 - Zoom2 115 116config SND_SOC_OMAP_ABE_TWL6040 117 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" 118 depends on TWL6040_CORE && COMMON_CLK 119 depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST 120 select SND_SOC_OMAP_DMIC 121 select SND_SOC_OMAP_MCPDM 122 select SND_SOC_TWL6040 123 help 124 Say Y or M if you want to add support for SoC audio on OMAP boards 125 using ABE and twl6040 codec. This driver currently supports: 126 - SDP4430/Blaze boards 127 - PandaBoard (4430) 128 - PandaBoardES (4460) 129 - OMAP5 uEVM 130 131config SND_SOC_OMAP_AMS_DELTA 132 tristate "SoC Audio support for Amstrad E3 (Delta) videophone" 133 depends on MACH_AMS_DELTA && TTY 134 select SND_SOC_OMAP_MCBSP 135 select SND_SOC_CX20442 136 help 137 Say Y or M if you want to add support for SoC audio device 138 connected to a handset and a speakerphone found on Amstrad E3 (Delta) 139 videophone. 140 141 Note that in order to get those devices fully supported, you have to 142 build the kernel with standard serial port driver included and 143 configured for at least 4 ports. Then, from userspace, you must load 144 a line discipline #19 on the modem (ttyS3) serial line. The simplest 145 way to achieve this is to install util-linux-ng and use the included 146 ldattach utility. This can be started automatically from udev, 147 a simple rule like this one should do the trick (it does for me): 148 ACTION=="add", KERNEL=="controlC0", \ 149 RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" 150 151config SND_SOC_OMAP_HDMI 152 tristate "OMAP4/5 HDMI audio support" 153 depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST 154 select SND_SOC_TI_SDMA_PCM 155 help 156 For HDMI audio to work OMAPDSS HDMI support should be 157 enabled. 158 The hdmi audio driver implements cpu-dai component using the 159 callbacks provided by OMAPDSS and registers the component 160 under DSS HDMI device. Omap-pcm is registered for platform 161 component also under DSS HDMI device. Dummy codec is used as 162 as codec component. The hdmi audio driver implements also 163 the card and registers it under its own platform device. 164 The device for the driver is registered by OMAPDSS hdmi 165 driver. 166 167config SND_SOC_OMAP_OSK5912 168 tristate "SoC Audio support for omap osk5912" 169 depends on MACH_OMAP_OSK && I2C 170 select SND_SOC_OMAP_MCBSP 171 select SND_SOC_TLV320AIC23_I2C 172 help 173 Say Y or M if you want to add support for SoC audio on osk5912. 174 175config SND_SOC_DAVINCI_EVM 176 tristate "SoC Audio support for DaVinci EVMs" 177 depends on ARCH_DAVINCI && I2C 178 select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM 179 select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC 180 select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC 181 select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 182 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM 183 select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM 184 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM 185 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM 186 select SND_SOC_TLV320AIC3X 187 help 188 Say Y if you want to add support for SoC audio on the following TI 189 DaVinci EVM platforms: 190 - DM355 191 - DM365 192 - DM6446 193 - DM6447 194 - DM830 195 - DM850 196 197choice 198 prompt "DM365 codec select" 199 depends on SND_SOC_DAVINCI_EVM 200 depends on MACH_DAVINCI_DM365_EVM 201 202config SND_SOC_DM365_AIC3X_CODEC 203 bool "Audio Codec - AIC3101" 204 help 205 Say Y if you want to add support for AIC3101 audio codec 206 207config SND_SOC_DM365_VOICE_CODEC 208 bool "Voice Codec - CQ93VC" 209 help 210 Say Y if you want to add support for SoC On-chip voice codec 211endchoice 212 213config SND_SOC_DM365_VOICE_CODEC_MODULE 214 def_tristate y 215 depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC 216 select MFD_DAVINCI_VOICECODEC 217 select SND_SOC_CQ0093VC 218 help 219 The is an internal symbol needed to ensure that the codec 220 and MFD driver can be built as loadable modules if necessary. 221 222endmenu 223 224