1# SPDX-License-Identifier: GPL-2.0-only 2menu "Audio support for Texas Instruments SoCs" 3depends on DMA_OMAP || TI_EDMA || COMPILE_TEST 4 5config SND_SOC_TI_EDMA_PCM 6 tristate 7 select SND_SOC_GENERIC_DMAENGINE_PCM 8 9config SND_SOC_TI_SDMA_PCM 10 tristate 11 select SND_SOC_GENERIC_DMAENGINE_PCM 12 13comment "Texas Instruments DAI support for:" 14config SND_SOC_DAVINCI_ASP 15 tristate "daVinci Audio Serial Port (ASP) or McBSP support" 16 depends on ARCH_DAVINCI || COMPILE_TEST 17 select SND_SOC_TI_EDMA_PCM 18 help 19 Say Y or M here if you want audio support via daVinci ASP or McBSP. 20 The driver only implements the ASP support which is a subset of 21 daVinci McBSP (w/o the multichannel support). 22 23config SND_SOC_DAVINCI_MCASP 24 tristate "Multichannel Audio Serial Port (McASP) support" 25 select SND_SOC_TI_EDMA_PCM 26 select SND_SOC_TI_SDMA_PCM 27 help 28 Say Y or M here if you want to have support for McASP IP found in 29 various Texas Instruments SoCs like: 30 - daVinci devices 31 - Sitara line of SoCs (AM335x, AM438x, etc) 32 - DRA7x devices 33 - Keystone devices 34 35config SND_SOC_DAVINCI_VCIF 36 tristate "daVinci Voice Interface (VCIF) support" 37 depends on ARCH_DAVINCI || COMPILE_TEST 38 select SND_SOC_TI_EDMA_PCM 39 help 40 Say Y or M here if you want audio support via daVinci VCIF. 41 42config SND_SOC_OMAP_DMIC 43 tristate "Digital Microphone Module (DMIC) support" 44 depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST 45 select SND_SOC_TI_SDMA_PCM 46 help 47 Say Y or M here if you want to have support for DMIC IP found in 48 OMAP4 and OMAP5. 49 50config SND_SOC_OMAP_MCBSP 51 tristate "Multichannel Buffered Serial Port (McBSP) support" 52 depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST 53 select SND_SOC_TI_SDMA_PCM 54 help 55 Say Y or M here if you want to have support for McBSP IP found in 56 Texas Instruments OMAP1/2/3/4/5 SoCs. 57 58config SND_SOC_OMAP_MCPDM 59 tristate "Multichannel PDM Controller (McPDM) support" 60 depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST 61 select SND_SOC_TI_SDMA_PCM 62 help 63 Say Y or M here if you want to have support for McPDM IP found in 64 OMAP4 and OMAP5. 65 66comment "Audio support for boards with Texas Instruments SoCs" 67config SND_SOC_NOKIA_N810 68 tristate "SoC Audio support for Nokia N810" 69 depends on MACH_NOKIA_N810 && I2C 70 select SND_SOC_OMAP_MCBSP 71 select SND_SOC_TLV320AIC3X 72 help 73 Say Y or M if you want to add support for SoC audio on Nokia N810. 74 75config SND_SOC_NOKIA_RX51 76 tristate "SoC Audio support for Nokia RX-51" 77 depends on ARCH_OMAP3 && I2C && GPIOLIB 78 select SND_SOC_OMAP_MCBSP 79 select SND_SOC_TLV320AIC3X 80 select SND_SOC_TPA6130A2 81 help 82 Say Y or M if you want to add support for SoC audio on Nokia RX-51 83 hardware. This is also known as Nokia N900 product. 84 85config SND_SOC_OMAP3_PANDORA 86 tristate "SoC Audio support for OMAP3 Pandora" 87 depends on ARCH_OMAP3 88 depends on TWL4030_CORE 89 select SND_SOC_OMAP_MCBSP 90 select SND_SOC_TWL4030 91 help 92 Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. 93 94config SND_SOC_OMAP3_TWL4030 95 tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" 96 depends on ARCH_OMAP3 || COMPILE_TEST 97 depends on TWL4030_CORE 98 select SND_SOC_OMAP_MCBSP 99 select SND_SOC_TWL4030 100 help 101 Say Y or M if you want to add support for SoC audio on OMAP3 based 102 boards using twl4030 as codec. This driver currently supports: 103 - Beagleboard or Devkit8000 104 - Gumstix Overo or CompuLab CM-T35/CM-T3730 105 - IGEP v2 106 - OMAP3EVM 107 - SDP3430 108 - Zoom2 109 110config SND_SOC_OMAP_ABE_TWL6040 111 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" 112 depends on TWL6040_CORE && COMMON_CLK 113 depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST 114 select SND_SOC_OMAP_DMIC 115 select SND_SOC_OMAP_MCPDM 116 select SND_SOC_TWL6040 117 help 118 Say Y or M if you want to add support for SoC audio on OMAP boards 119 using ABE and twl6040 codec. This driver currently supports: 120 - SDP4430/Blaze boards 121 - PandaBoard (4430) 122 - PandaBoardES (4460) 123 - OMAP5 uEVM 124 125config SND_SOC_OMAP_AMS_DELTA 126 tristate "SoC Audio support for Amstrad E3 (Delta) videophone" 127 depends on MACH_AMS_DELTA && TTY 128 select SND_SOC_OMAP_MCBSP 129 select SND_SOC_CX20442 130 help 131 Say Y or M if you want to add support for SoC audio device 132 connected to a handset and a speakerphone found on Amstrad E3 (Delta) 133 videophone. 134 135 Note that in order to get those devices fully supported, you have to 136 build the kernel with standard serial port driver included and 137 configured for at least 4 ports. Then, from userspace, you must load 138 a line discipline #19 on the modem (ttyS3) serial line. The simplest 139 way to achieve this is to install util-linux-ng and use the included 140 ldattach utility. This can be started automatically from udev, 141 a simple rule like this one should do the trick (it does for me): 142 ACTION=="add", KERNEL=="controlC0", \ 143 RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" 144 145config SND_SOC_OMAP_HDMI 146 tristate "OMAP4/5 HDMI audio support" 147 depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST 148 select SND_SOC_TI_SDMA_PCM 149 help 150 For HDMI audio to work OMAPDSS HDMI support should be 151 enabled. 152 The hdmi audio driver implements cpu-dai component using the 153 callbacks provided by OMAPDSS and registers the component 154 under DSS HDMI device. Omap-pcm is registered for platform 155 component also under DSS HDMI device. Dummy codec is used as 156 as codec component. The hdmi audio driver implements also 157 the card and registers it under its own platform device. 158 The device for the driver is registered by OMAPDSS hdmi 159 driver. 160 161config SND_SOC_OMAP_OSK5912 162 tristate "SoC Audio support for omap osk5912" 163 depends on MACH_OMAP_OSK && I2C 164 select SND_SOC_OMAP_MCBSP 165 select SND_SOC_TLV320AIC23_I2C 166 help 167 Say Y or M if you want to add support for SoC audio on osk5912. 168 169config SND_SOC_DAVINCI_EVM 170 tristate "SoC Audio support for DaVinci EVMs" 171 depends on ARCH_DAVINCI && I2C 172 select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM 173 select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC 174 select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC 175 select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 176 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM 177 select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM 178 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM 179 select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM 180 select SND_SOC_TLV320AIC3X 181 help 182 Say Y if you want to add support for SoC audio on the following TI 183 DaVinci EVM platforms: 184 - DM355 185 - DM365 186 - DM6446 187 - DM6447 188 - DM830 189 - DM850 190 191choice 192 prompt "DM365 codec select" 193 depends on SND_SOC_DAVINCI_EVM 194 depends on MACH_DAVINCI_DM365_EVM 195 196config SND_SOC_DM365_AIC3X_CODEC 197 bool "Audio Codec - AIC3101" 198 help 199 Say Y if you want to add support for AIC3101 audio codec 200 201config SND_SOC_DM365_VOICE_CODEC 202 bool "Voice Codec - CQ93VC" 203 help 204 Say Y if you want to add support for SoC On-chip voice codec 205endchoice 206 207config SND_SOC_DM365_VOICE_CODEC_MODULE 208 def_tristate y 209 depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC 210 select MFD_DAVINCI_VOICECODEC 211 select SND_SOC_CQ0093VC 212 help 213 The is an internal symbol needed to ensure that the codec 214 and MFD driver can be built as loadable modules if necessary. 215 216endmenu 217 218