1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) 2 // 3 // This file is provided under a dual BSD/GPLv2 license. When using or 4 // redistributing this file, you may do so under either license. 5 // 6 // Copyright(c) 2018 Intel Corporation. All rights reserved. 7 // 8 // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> 9 // 10 11 #include "ops.h" 12 #include "sof-priv.h" 13 #include "sof-audio.h" 14 15 /* 16 * Helper function to determine the target DSP state during 17 * system suspend. This function only cares about the device 18 * D-states. Platform-specific substates, if any, should be 19 * handled by the platform-specific parts. 20 */ 21 static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev) 22 { 23 u32 target_dsp_state; 24 25 switch (sdev->system_suspend_target) { 26 case SOF_SUSPEND_S5: 27 case SOF_SUSPEND_S4: 28 /* DSP should be in D3 if the system is suspending to S3+ */ 29 case SOF_SUSPEND_S3: 30 /* DSP should be in D3 if the system is suspending to S3 */ 31 target_dsp_state = SOF_DSP_PM_D3; 32 break; 33 case SOF_SUSPEND_S0IX: 34 /* 35 * Currently, the only criterion for retaining the DSP in D0 36 * is that there are streams that ignored the suspend trigger. 37 * Additional criteria such Soundwire clock-stop mode and 38 * device suspend latency considerations will be added later. 39 */ 40 if (snd_sof_stream_suspend_ignored(sdev)) 41 target_dsp_state = SOF_DSP_PM_D0; 42 else 43 target_dsp_state = SOF_DSP_PM_D3; 44 break; 45 default: 46 /* This case would be during runtime suspend */ 47 target_dsp_state = SOF_DSP_PM_D3; 48 break; 49 } 50 51 return target_dsp_state; 52 } 53 54 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) 55 static void sof_cache_debugfs(struct snd_sof_dev *sdev) 56 { 57 struct snd_sof_dfsentry *dfse; 58 59 list_for_each_entry(dfse, &sdev->dfsentry_list, list) { 60 61 /* nothing to do if debugfs buffer is not IO mem */ 62 if (dfse->type == SOF_DFSENTRY_TYPE_BUF) 63 continue; 64 65 /* cache memory that is only accessible in D0 */ 66 if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY) 67 memcpy_fromio(dfse->cache_buf, dfse->io_mem, 68 dfse->size); 69 } 70 } 71 #endif 72 73 static int sof_resume(struct device *dev, bool runtime_resume) 74 { 75 struct snd_sof_dev *sdev = dev_get_drvdata(dev); 76 const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); 77 const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); 78 u32 old_state = sdev->dsp_power_state.state; 79 int ret; 80 81 /* do nothing if dsp resume callbacks are not set */ 82 if (!runtime_resume && !sof_ops(sdev)->resume) 83 return 0; 84 85 if (runtime_resume && !sof_ops(sdev)->runtime_resume) 86 return 0; 87 88 /* DSP was never successfully started, nothing to resume */ 89 if (sdev->first_boot) 90 return 0; 91 92 /* 93 * if the runtime_resume flag is set, call the runtime_resume routine 94 * or else call the system resume routine 95 */ 96 if (runtime_resume) 97 ret = snd_sof_dsp_runtime_resume(sdev); 98 else 99 ret = snd_sof_dsp_resume(sdev); 100 if (ret < 0) { 101 dev_err(sdev->dev, 102 "error: failed to power up DSP after resume\n"); 103 return ret; 104 } 105 106 if (sdev->dspless_mode_selected) { 107 sof_set_fw_state(sdev, SOF_DSPLESS_MODE); 108 return 0; 109 } 110 111 /* 112 * Nothing further to be done for platforms that support the low power 113 * D0 substate. Resume trace and return when resuming from 114 * low-power D0 substate 115 */ 116 if (!runtime_resume && sof_ops(sdev)->set_power_state && 117 old_state == SOF_DSP_PM_D0) { 118 ret = sof_fw_trace_resume(sdev); 119 if (ret < 0) 120 /* non fatal */ 121 dev_warn(sdev->dev, 122 "failed to enable trace after resume %d\n", ret); 123 return 0; 124 } 125 126 sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE); 127 128 /* load the firmware */ 129 ret = snd_sof_load_firmware(sdev); 130 if (ret < 0) { 131 dev_err(sdev->dev, 132 "error: failed to load DSP firmware after resume %d\n", 133 ret); 134 sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); 135 return ret; 136 } 137 138 sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS); 139 140 /* 141 * Boot the firmware. The FW boot status will be modified 142 * in snd_sof_run_firmware() depending on the outcome. 143 */ 144 ret = snd_sof_run_firmware(sdev); 145 if (ret < 0) { 146 dev_err(sdev->dev, 147 "error: failed to boot DSP firmware after resume %d\n", 148 ret); 149 sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); 150 return ret; 151 } 152 153 /* resume DMA trace */ 154 ret = sof_fw_trace_resume(sdev); 155 if (ret < 0) { 156 /* non fatal */ 157 dev_warn(sdev->dev, 158 "warning: failed to init trace after resume %d\n", 159 ret); 160 } 161 162 /* restore pipelines */ 163 if (tplg_ops && tplg_ops->set_up_all_pipelines) { 164 ret = tplg_ops->set_up_all_pipelines(sdev, false); 165 if (ret < 0) { 166 dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret); 167 goto setup_fail; 168 } 169 } 170 171 /* Notify clients not managed by pm framework about core resume */ 172 sof_resume_clients(sdev); 173 174 /* notify DSP of system resume */ 175 if (pm_ops && pm_ops->ctx_restore) { 176 ret = pm_ops->ctx_restore(sdev); 177 if (ret < 0) 178 dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret); 179 } 180 181 setup_fail: 182 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) 183 if (ret < 0) { 184 /* 185 * Debugfs cannot be read in runtime suspend, so cache 186 * the contents upon failure. This allows to capture 187 * possible DSP coredump information. 188 */ 189 sof_cache_debugfs(sdev); 190 } 191 #endif 192 193 return ret; 194 } 195 196 static int sof_suspend(struct device *dev, bool runtime_suspend) 197 { 198 struct snd_sof_dev *sdev = dev_get_drvdata(dev); 199 const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); 200 const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); 201 pm_message_t pm_state; 202 u32 target_state = snd_sof_dsp_power_target(sdev); 203 u32 old_state = sdev->dsp_power_state.state; 204 int ret; 205 206 /* do nothing if dsp suspend callback is not set */ 207 if (!runtime_suspend && !sof_ops(sdev)->suspend) 208 return 0; 209 210 if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) 211 return 0; 212 213 /* we need to tear down pipelines only if the DSP hardware is 214 * active, which happens for PCI devices. if the device is 215 * suspended, it is brought back to full power and then 216 * suspended again 217 */ 218 if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0)) 219 tplg_ops->tear_down_all_pipelines(sdev, false); 220 221 if (sdev->fw_state != SOF_FW_BOOT_COMPLETE) 222 goto suspend; 223 224 /* prepare for streams to be resumed properly upon resume */ 225 if (!runtime_suspend) { 226 ret = snd_sof_dsp_hw_params_upon_resume(sdev); 227 if (ret < 0) { 228 dev_err(sdev->dev, 229 "error: setting hw_params flag during suspend %d\n", 230 ret); 231 return ret; 232 } 233 } 234 235 pm_state.event = target_state; 236 237 /* suspend DMA trace */ 238 sof_fw_trace_suspend(sdev, pm_state); 239 240 /* Notify clients not managed by pm framework about core suspend */ 241 sof_suspend_clients(sdev, pm_state); 242 243 /* Skip to platform-specific suspend if DSP is entering D0 */ 244 if (target_state == SOF_DSP_PM_D0) 245 goto suspend; 246 247 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) 248 /* cache debugfs contents during runtime suspend */ 249 if (runtime_suspend) 250 sof_cache_debugfs(sdev); 251 #endif 252 /* notify DSP of upcoming power down */ 253 if (pm_ops && pm_ops->ctx_save) { 254 ret = pm_ops->ctx_save(sdev); 255 if (ret == -EBUSY || ret == -EAGAIN) { 256 /* 257 * runtime PM has logic to handle -EBUSY/-EAGAIN so 258 * pass these errors up 259 */ 260 dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret); 261 return ret; 262 } else if (ret < 0) { 263 /* FW in unexpected state, continue to power down */ 264 dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n", 265 ret); 266 } 267 } 268 269 suspend: 270 271 /* return if the DSP was not probed successfully */ 272 if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED) 273 return 0; 274 275 /* platform-specific suspend */ 276 if (runtime_suspend) 277 ret = snd_sof_dsp_runtime_suspend(sdev); 278 else 279 ret = snd_sof_dsp_suspend(sdev, target_state); 280 if (ret < 0) 281 dev_err(sdev->dev, 282 "error: failed to power down DSP during suspend %d\n", 283 ret); 284 285 /* Do not reset FW state if DSP is in D0 */ 286 if (target_state == SOF_DSP_PM_D0) 287 return ret; 288 289 /* reset FW state */ 290 sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); 291 sdev->enabled_cores_mask = 0; 292 293 return ret; 294 } 295 296 int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev) 297 { 298 const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); 299 300 /* Notify DSP of upcoming power down */ 301 if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save) 302 return pm_ops->ctx_save(sdev); 303 304 return 0; 305 } 306 307 int snd_sof_runtime_suspend(struct device *dev) 308 { 309 return sof_suspend(dev, true); 310 } 311 EXPORT_SYMBOL(snd_sof_runtime_suspend); 312 313 int snd_sof_runtime_idle(struct device *dev) 314 { 315 struct snd_sof_dev *sdev = dev_get_drvdata(dev); 316 317 return snd_sof_dsp_runtime_idle(sdev); 318 } 319 EXPORT_SYMBOL(snd_sof_runtime_idle); 320 321 int snd_sof_runtime_resume(struct device *dev) 322 { 323 return sof_resume(dev, true); 324 } 325 EXPORT_SYMBOL(snd_sof_runtime_resume); 326 327 int snd_sof_resume(struct device *dev) 328 { 329 return sof_resume(dev, false); 330 } 331 EXPORT_SYMBOL(snd_sof_resume); 332 333 int snd_sof_suspend(struct device *dev) 334 { 335 return sof_suspend(dev, false); 336 } 337 EXPORT_SYMBOL(snd_sof_suspend); 338 339 int snd_sof_prepare(struct device *dev) 340 { 341 struct snd_sof_dev *sdev = dev_get_drvdata(dev); 342 const struct sof_dev_desc *desc = sdev->pdata->desc; 343 344 /* will suspend to S3 by default */ 345 sdev->system_suspend_target = SOF_SUSPEND_S3; 346 347 /* 348 * if the firmware is crashed or boot failed then we try to aim for S3 349 * to reboot the firmware 350 */ 351 if (sdev->fw_state == SOF_FW_CRASHED || 352 sdev->fw_state == SOF_FW_BOOT_FAILED) 353 return 0; 354 355 if (!desc->use_acpi_target_states) 356 return 0; 357 358 #if defined(CONFIG_ACPI) 359 switch (acpi_target_system_state()) { 360 case ACPI_STATE_S0: 361 sdev->system_suspend_target = SOF_SUSPEND_S0IX; 362 break; 363 case ACPI_STATE_S1: 364 case ACPI_STATE_S2: 365 case ACPI_STATE_S3: 366 sdev->system_suspend_target = SOF_SUSPEND_S3; 367 break; 368 case ACPI_STATE_S4: 369 sdev->system_suspend_target = SOF_SUSPEND_S4; 370 break; 371 case ACPI_STATE_S5: 372 sdev->system_suspend_target = SOF_SUSPEND_S5; 373 break; 374 default: 375 break; 376 } 377 #endif 378 379 return 0; 380 } 381 EXPORT_SYMBOL(snd_sof_prepare); 382 383 void snd_sof_complete(struct device *dev) 384 { 385 struct snd_sof_dev *sdev = dev_get_drvdata(dev); 386 387 sdev->system_suspend_target = SOF_SUSPEND_NONE; 388 } 389 EXPORT_SYMBOL(snd_sof_complete); 390