xref: /openbmc/linux/sound/soc/sof/pm.c (revision e4df2d5e)
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
9 //
10 
11 #include "ops.h"
12 #include "sof-priv.h"
13 #include "sof-audio.h"
14 
15 /*
16  * Helper function to determine the target DSP state during
17  * system suspend. This function only cares about the device
18  * D-states. Platform-specific substates, if any, should be
19  * handled by the platform-specific parts.
20  */
21 static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
22 {
23 	u32 target_dsp_state;
24 
25 	switch (sdev->system_suspend_target) {
26 	case SOF_SUSPEND_S3:
27 		/* DSP should be in D3 if the system is suspending to S3 */
28 		target_dsp_state = SOF_DSP_PM_D3;
29 		break;
30 	case SOF_SUSPEND_S0IX:
31 		/*
32 		 * Currently, the only criterion for retaining the DSP in D0
33 		 * is that there are streams that ignored the suspend trigger.
34 		 * Additional criteria such Soundwire clock-stop mode and
35 		 * device suspend latency considerations will be added later.
36 		 */
37 		if (snd_sof_stream_suspend_ignored(sdev))
38 			target_dsp_state = SOF_DSP_PM_D0;
39 		else
40 			target_dsp_state = SOF_DSP_PM_D3;
41 		break;
42 	default:
43 		/* This case would be during runtime suspend */
44 		target_dsp_state = SOF_DSP_PM_D3;
45 		break;
46 	}
47 
48 	return target_dsp_state;
49 }
50 
51 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
52 static void sof_cache_debugfs(struct snd_sof_dev *sdev)
53 {
54 	struct snd_sof_dfsentry *dfse;
55 
56 	list_for_each_entry(dfse, &sdev->dfsentry_list, list) {
57 
58 		/* nothing to do if debugfs buffer is not IO mem */
59 		if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
60 			continue;
61 
62 		/* cache memory that is only accessible in D0 */
63 		if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
64 			memcpy_fromio(dfse->cache_buf, dfse->io_mem,
65 				      dfse->size);
66 	}
67 }
68 #endif
69 
70 static int sof_resume(struct device *dev, bool runtime_resume)
71 {
72 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
73 	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
74 	const struct sof_ipc_tplg_ops *tplg_ops = sdev->ipc->ops->tplg;
75 	u32 old_state = sdev->dsp_power_state.state;
76 	int ret;
77 
78 	/* do nothing if dsp resume callbacks are not set */
79 	if (!runtime_resume && !sof_ops(sdev)->resume)
80 		return 0;
81 
82 	if (runtime_resume && !sof_ops(sdev)->runtime_resume)
83 		return 0;
84 
85 	/* DSP was never successfully started, nothing to resume */
86 	if (sdev->first_boot)
87 		return 0;
88 
89 	/*
90 	 * if the runtime_resume flag is set, call the runtime_resume routine
91 	 * or else call the system resume routine
92 	 */
93 	if (runtime_resume)
94 		ret = snd_sof_dsp_runtime_resume(sdev);
95 	else
96 		ret = snd_sof_dsp_resume(sdev);
97 	if (ret < 0) {
98 		dev_err(sdev->dev,
99 			"error: failed to power up DSP after resume\n");
100 		return ret;
101 	}
102 
103 	/*
104 	 * Nothing further to be done for platforms that support the low power
105 	 * D0 substate.
106 	 */
107 	if (!runtime_resume && sof_ops(sdev)->set_power_state &&
108 	    old_state == SOF_DSP_PM_D0)
109 		return 0;
110 
111 	sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE);
112 
113 	/* load the firmware */
114 	ret = snd_sof_load_firmware(sdev);
115 	if (ret < 0) {
116 		dev_err(sdev->dev,
117 			"error: failed to load DSP firmware after resume %d\n",
118 			ret);
119 		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
120 		return ret;
121 	}
122 
123 	sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS);
124 
125 	/*
126 	 * Boot the firmware. The FW boot status will be modified
127 	 * in snd_sof_run_firmware() depending on the outcome.
128 	 */
129 	ret = snd_sof_run_firmware(sdev);
130 	if (ret < 0) {
131 		dev_err(sdev->dev,
132 			"error: failed to boot DSP firmware after resume %d\n",
133 			ret);
134 		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
135 		return ret;
136 	}
137 
138 	/* resume DMA trace, only need send ipc */
139 	ret = snd_sof_init_trace_ipc(sdev);
140 	if (ret < 0) {
141 		/* non fatal */
142 		dev_warn(sdev->dev,
143 			 "warning: failed to init trace after resume %d\n",
144 			 ret);
145 	}
146 
147 	/* restore pipelines */
148 	if (tplg_ops->set_up_all_pipelines) {
149 		ret = tplg_ops->set_up_all_pipelines(sdev, false);
150 		if (ret < 0) {
151 			dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret);
152 			return ret;
153 		}
154 	}
155 
156 	/* Notify clients not managed by pm framework about core resume */
157 	sof_resume_clients(sdev);
158 
159 	/* notify DSP of system resume */
160 	if (pm_ops && pm_ops->ctx_restore) {
161 		ret = pm_ops->ctx_restore(sdev);
162 		if (ret < 0)
163 			dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret);
164 	}
165 
166 	return ret;
167 }
168 
169 static int sof_suspend(struct device *dev, bool runtime_suspend)
170 {
171 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
172 	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
173 	const struct sof_ipc_tplg_ops *tplg_ops = sdev->ipc->ops->tplg;
174 	pm_message_t pm_state;
175 	u32 target_state = 0;
176 	int ret;
177 
178 	/* do nothing if dsp suspend callback is not set */
179 	if (!runtime_suspend && !sof_ops(sdev)->suspend)
180 		return 0;
181 
182 	if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
183 		return 0;
184 
185 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
186 		goto suspend;
187 
188 	/* prepare for streams to be resumed properly upon resume */
189 	if (!runtime_suspend) {
190 		ret = sof_set_hw_params_upon_resume(sdev->dev);
191 		if (ret < 0) {
192 			dev_err(sdev->dev,
193 				"error: setting hw_params flag during suspend %d\n",
194 				ret);
195 			return ret;
196 		}
197 	}
198 
199 	target_state = snd_sof_dsp_power_target(sdev);
200 	pm_state.event = target_state;
201 
202 	/* Skip to platform-specific suspend if DSP is entering D0 */
203 	if (target_state == SOF_DSP_PM_D0) {
204 		/* Notify clients not managed by pm framework about core suspend */
205 		sof_suspend_clients(sdev, pm_state);
206 		goto suspend;
207 	}
208 
209 	if (tplg_ops->tear_down_all_pipelines)
210 		tplg_ops->tear_down_all_pipelines(sdev, false);
211 
212 	/* release trace */
213 	snd_sof_release_trace(sdev);
214 
215 	/* Notify clients not managed by pm framework about core suspend */
216 	sof_suspend_clients(sdev, pm_state);
217 
218 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
219 	/* cache debugfs contents during runtime suspend */
220 	if (runtime_suspend)
221 		sof_cache_debugfs(sdev);
222 #endif
223 	/* notify DSP of upcoming power down */
224 	if (pm_ops && pm_ops->ctx_save) {
225 		ret = pm_ops->ctx_save(sdev);
226 		if (ret == -EBUSY || ret == -EAGAIN) {
227 			/*
228 			 * runtime PM has logic to handle -EBUSY/-EAGAIN so
229 			 * pass these errors up
230 			 */
231 			dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret);
232 			return ret;
233 		} else if (ret < 0) {
234 			/* FW in unexpected state, continue to power down */
235 			dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n",
236 				 ret);
237 		}
238 	}
239 
240 suspend:
241 
242 	/* return if the DSP was not probed successfully */
243 	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
244 		return 0;
245 
246 	/* platform-specific suspend */
247 	if (runtime_suspend)
248 		ret = snd_sof_dsp_runtime_suspend(sdev);
249 	else
250 		ret = snd_sof_dsp_suspend(sdev, target_state);
251 	if (ret < 0)
252 		dev_err(sdev->dev,
253 			"error: failed to power down DSP during suspend %d\n",
254 			ret);
255 
256 	/* Do not reset FW state if DSP is in D0 */
257 	if (target_state == SOF_DSP_PM_D0)
258 		return ret;
259 
260 	/* reset FW state */
261 	sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
262 	sdev->enabled_cores_mask = 0;
263 
264 	return ret;
265 }
266 
267 int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
268 {
269 	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
270 
271 	/* Notify DSP of upcoming power down */
272 	if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save)
273 		return pm_ops->ctx_save(sdev);
274 
275 	return 0;
276 }
277 
278 int snd_sof_runtime_suspend(struct device *dev)
279 {
280 	return sof_suspend(dev, true);
281 }
282 EXPORT_SYMBOL(snd_sof_runtime_suspend);
283 
284 int snd_sof_runtime_idle(struct device *dev)
285 {
286 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
287 
288 	return snd_sof_dsp_runtime_idle(sdev);
289 }
290 EXPORT_SYMBOL(snd_sof_runtime_idle);
291 
292 int snd_sof_runtime_resume(struct device *dev)
293 {
294 	return sof_resume(dev, true);
295 }
296 EXPORT_SYMBOL(snd_sof_runtime_resume);
297 
298 int snd_sof_resume(struct device *dev)
299 {
300 	return sof_resume(dev, false);
301 }
302 EXPORT_SYMBOL(snd_sof_resume);
303 
304 int snd_sof_suspend(struct device *dev)
305 {
306 	return sof_suspend(dev, false);
307 }
308 EXPORT_SYMBOL(snd_sof_suspend);
309 
310 int snd_sof_prepare(struct device *dev)
311 {
312 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
313 	const struct sof_dev_desc *desc = sdev->pdata->desc;
314 
315 	/* will suspend to S3 by default */
316 	sdev->system_suspend_target = SOF_SUSPEND_S3;
317 
318 	/*
319 	 * if the firmware is crashed or boot failed then we try to aim for S3
320 	 * to reboot the firmware
321 	 */
322 	if (sdev->fw_state == SOF_FW_CRASHED ||
323 	    sdev->fw_state == SOF_FW_BOOT_FAILED)
324 		return 0;
325 
326 	if (!desc->use_acpi_target_states)
327 		return 0;
328 
329 #if defined(CONFIG_ACPI)
330 	if (acpi_target_system_state() == ACPI_STATE_S0)
331 		sdev->system_suspend_target = SOF_SUSPEND_S0IX;
332 #endif
333 
334 	return 0;
335 }
336 EXPORT_SYMBOL(snd_sof_prepare);
337 
338 void snd_sof_complete(struct device *dev)
339 {
340 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
341 
342 	sdev->system_suspend_target = SOF_SUSPEND_NONE;
343 }
344 EXPORT_SYMBOL(snd_sof_complete);
345