xref: /openbmc/linux/sound/soc/sof/intel/hda-loader.c (revision 6735b463)
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
9 //	    Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
10 //	    Rander Wang <rander.wang@intel.com>
11 //          Keyon Jie <yang.jie@linux.intel.com>
12 //
13 
14 /*
15  * Hardware interface for HDA DSP code loader
16  */
17 
18 #include <linux/firmware.h>
19 #include <sound/hdaudio_ext.h>
20 #include <sound/sof.h>
21 #include "../ops.h"
22 #include "hda.h"
23 
24 #define HDA_FW_BOOT_ATTEMPTS	3
25 
26 static int cl_stream_prepare(struct snd_sof_dev *sdev, unsigned int format,
27 			     unsigned int size, struct snd_dma_buffer *dmab,
28 			     int direction)
29 {
30 	struct hdac_ext_stream *dsp_stream;
31 	struct hdac_stream *hstream;
32 	struct pci_dev *pci = to_pci_dev(sdev->dev);
33 	int ret;
34 
35 	if (direction != SNDRV_PCM_STREAM_PLAYBACK) {
36 		dev_err(sdev->dev, "error: code loading DMA is playback only\n");
37 		return -EINVAL;
38 	}
39 
40 	dsp_stream = hda_dsp_stream_get(sdev, direction);
41 
42 	if (!dsp_stream) {
43 		dev_err(sdev->dev, "error: no stream available\n");
44 		return -ENODEV;
45 	}
46 	hstream = &dsp_stream->hstream;
47 	hstream->substream = NULL;
48 
49 	/* allocate DMA buffer */
50 	ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
51 	if (ret < 0) {
52 		dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret);
53 		goto error;
54 	}
55 
56 	hstream->period_bytes = 0;/* initialize period_bytes */
57 	hstream->format_val = format;
58 	hstream->bufsize = size;
59 
60 	ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL);
61 	if (ret < 0) {
62 		dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
63 		goto error;
64 	}
65 
66 	hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size);
67 
68 	return hstream->stream_tag;
69 
70 error:
71 	hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
72 	snd_dma_free_pages(dmab);
73 	return ret;
74 }
75 
76 /*
77  * first boot sequence has some extra steps. core 0 waits for power
78  * status on core 1, so power up core 1 also momentarily, keep it in
79  * reset/stall and then turn it off
80  */
81 static int cl_dsp_init(struct snd_sof_dev *sdev, const void *fwdata,
82 		       u32 fwsize, int stream_tag)
83 {
84 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
85 	const struct sof_intel_dsp_desc *chip = hda->desc;
86 	unsigned int status;
87 	int ret;
88 	int i;
89 
90 	/* step 1: power up corex */
91 	ret = hda_dsp_core_power_up(sdev, chip->cores_mask);
92 	if (ret < 0) {
93 		dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n");
94 		goto err;
95 	}
96 
97 	/* DSP is powered up, set all SSPs to slave mode */
98 	for (i = 0; i < chip->ssp_count; i++) {
99 		snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
100 						 chip->ssp_base_offset
101 						 + i * SSP_DEV_MEM_SIZE
102 						 + SSP_SSC1_OFFSET,
103 						 SSP_SET_SLAVE,
104 						 SSP_SET_SLAVE);
105 	}
106 
107 	/* step 2: purge FW request */
108 	snd_sof_dsp_write(sdev, HDA_DSP_BAR, chip->ipc_req,
109 			  chip->ipc_req_mask | (HDA_DSP_IPC_PURGE_FW |
110 			  ((stream_tag - 1) << 9)));
111 
112 	/* step 3: unset core 0 reset state & unstall/run core 0 */
113 	ret = hda_dsp_core_run(sdev, HDA_DSP_CORE_MASK(0));
114 	if (ret < 0) {
115 		dev_err(sdev->dev, "error: dsp core start failed %d\n", ret);
116 		ret = -EIO;
117 		goto err;
118 	}
119 
120 	/* step 4: wait for IPC DONE bit from ROM */
121 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
122 					    chip->ipc_ack, status,
123 					    ((status & chip->ipc_ack_mask)
124 						    == chip->ipc_ack_mask),
125 					    HDA_DSP_REG_POLL_INTERVAL_US,
126 					    HDA_DSP_INIT_TIMEOUT_US);
127 
128 	if (ret < 0) {
129 		dev_err(sdev->dev, "error: %s: timeout for HIPCIE done\n",
130 			__func__);
131 		goto err;
132 	}
133 
134 	/* set DONE bit to clear the reply IPC message */
135 	snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
136 				       chip->ipc_ack,
137 				       chip->ipc_ack_mask,
138 				       chip->ipc_ack_mask);
139 
140 	/* step 5: power down corex */
141 	ret = hda_dsp_core_power_down(sdev,
142 				  chip->cores_mask & ~(HDA_DSP_CORE_MASK(0)));
143 	if (ret < 0) {
144 		dev_err(sdev->dev, "error: dsp core x power down failed\n");
145 		goto err;
146 	}
147 
148 	/* step 6: enable IPC interrupts */
149 	hda_dsp_ipc_int_enable(sdev);
150 
151 	/* step 7: wait for ROM init */
152 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
153 					HDA_DSP_SRAM_REG_ROM_STATUS, status,
154 					((status & HDA_DSP_ROM_STS_MASK)
155 						== HDA_DSP_ROM_INIT),
156 					HDA_DSP_REG_POLL_INTERVAL_US,
157 					chip->rom_init_timeout *
158 					USEC_PER_MSEC);
159 	if (!ret)
160 		return 0;
161 
162 	dev_err(sdev->dev,
163 		"error: %s: timeout HDA_DSP_SRAM_REG_ROM_STATUS read\n",
164 		__func__);
165 
166 err:
167 	hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
168 	hda_dsp_core_reset_power_down(sdev, chip->cores_mask);
169 
170 	return ret;
171 }
172 
173 static int cl_trigger(struct snd_sof_dev *sdev,
174 		      struct hdac_ext_stream *stream, int cmd)
175 {
176 	struct hdac_stream *hstream = &stream->hstream;
177 	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
178 
179 	/* code loader is special case that reuses stream ops */
180 	switch (cmd) {
181 	case SNDRV_PCM_TRIGGER_START:
182 		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
183 					1 << hstream->index,
184 					1 << hstream->index);
185 
186 		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
187 					sd_offset,
188 					SOF_HDA_SD_CTL_DMA_START |
189 					SOF_HDA_CL_DMA_SD_INT_MASK,
190 					SOF_HDA_SD_CTL_DMA_START |
191 					SOF_HDA_CL_DMA_SD_INT_MASK);
192 
193 		hstream->running = true;
194 		return 0;
195 	default:
196 		return hda_dsp_stream_trigger(sdev, stream, cmd);
197 	}
198 }
199 
200 static struct hdac_ext_stream *get_stream_with_tag(struct snd_sof_dev *sdev,
201 						   int tag)
202 {
203 	struct hdac_bus *bus = sof_to_bus(sdev);
204 	struct hdac_stream *s;
205 
206 	/* get stream with tag */
207 	list_for_each_entry(s, &bus->stream_list, list) {
208 		if (s->direction == SNDRV_PCM_STREAM_PLAYBACK &&
209 		    s->stream_tag == tag) {
210 			return stream_to_hdac_ext_stream(s);
211 		}
212 	}
213 
214 	return NULL;
215 }
216 
217 static int cl_cleanup(struct snd_sof_dev *sdev, struct snd_dma_buffer *dmab,
218 		      struct hdac_ext_stream *stream)
219 {
220 	struct hdac_stream *hstream = &stream->hstream;
221 	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
222 	int ret;
223 
224 	ret = hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0);
225 
226 	hda_dsp_stream_put(sdev, SNDRV_PCM_STREAM_PLAYBACK,
227 			   hstream->stream_tag);
228 	hstream->running = 0;
229 	hstream->substream = NULL;
230 
231 	/* reset BDL address */
232 	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
233 			  sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, 0);
234 	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR,
235 			  sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
236 
237 	snd_sof_dsp_write(sdev, HDA_DSP_HDA_BAR, sd_offset, 0);
238 	snd_dma_free_pages(dmab);
239 	dmab->area = NULL;
240 	hstream->bufsize = 0;
241 	hstream->format_val = 0;
242 
243 	return ret;
244 }
245 
246 static int cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *stream)
247 {
248 	unsigned int reg;
249 	int ret, status;
250 
251 	ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_START);
252 	if (ret < 0) {
253 		dev_err(sdev->dev, "error: DMA trigger start failed\n");
254 		return ret;
255 	}
256 
257 	status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
258 					HDA_DSP_SRAM_REG_ROM_STATUS, reg,
259 					((reg & HDA_DSP_ROM_STS_MASK)
260 						== HDA_DSP_ROM_FW_ENTERED),
261 					HDA_DSP_REG_POLL_INTERVAL_US,
262 					HDA_DSP_BASEFW_TIMEOUT_US);
263 
264 	/*
265 	 * even in case of errors we still need to stop the DMAs,
266 	 * but we return the initial error should the DMA stop also fail
267 	 */
268 
269 	if (status < 0) {
270 		dev_err(sdev->dev,
271 			"error: %s: timeout HDA_DSP_SRAM_REG_ROM_STATUS read\n",
272 			__func__);
273 	}
274 
275 	ret = cl_trigger(sdev, stream, SNDRV_PCM_TRIGGER_STOP);
276 	if (ret < 0) {
277 		dev_err(sdev->dev, "error: DMA trigger stop failed\n");
278 		if (!status)
279 			status = ret;
280 	}
281 
282 	return status;
283 }
284 
285 int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
286 {
287 	struct snd_sof_pdata *plat_data = sdev->pdata;
288 	const struct sof_dev_desc *desc = plat_data->desc;
289 	const struct sof_intel_dsp_desc *chip_info;
290 	struct hdac_ext_stream *stream;
291 	struct firmware stripped_firmware;
292 	int ret, ret1, tag, i;
293 
294 	chip_info = desc->chip_info;
295 
296 	if (plat_data->fw->size <= plat_data->fw_offset) {
297 		dev_err(sdev->dev, "error: firmware size must be greater than firmware offset\n");
298 		return -EINVAL;
299 	}
300 
301 	stripped_firmware.data = plat_data->fw->data + plat_data->fw_offset;
302 	stripped_firmware.size = plat_data->fw->size - plat_data->fw_offset;
303 
304 	/* init for booting wait */
305 	init_waitqueue_head(&sdev->boot_wait);
306 
307 	/* prepare DMA for code loader stream */
308 	tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size,
309 				&sdev->dmab, SNDRV_PCM_STREAM_PLAYBACK);
310 
311 	if (tag < 0) {
312 		dev_err(sdev->dev, "error: dma prepare for fw loading err: %x\n",
313 			tag);
314 		return tag;
315 	}
316 
317 	/* get stream with tag */
318 	stream = get_stream_with_tag(sdev, tag);
319 	if (!stream) {
320 		dev_err(sdev->dev,
321 			"error: could not get stream with stream tag %d\n",
322 			tag);
323 		ret = -ENODEV;
324 		goto err;
325 	}
326 
327 	memcpy(sdev->dmab.area, stripped_firmware.data,
328 	       stripped_firmware.size);
329 
330 	/* try ROM init a few times before giving up */
331 	for (i = 0; i < HDA_FW_BOOT_ATTEMPTS; i++) {
332 		ret = cl_dsp_init(sdev, stripped_firmware.data,
333 				  stripped_firmware.size, tag);
334 
335 		/* don't retry anymore if successful */
336 		if (!ret)
337 			break;
338 
339 		dev_dbg(sdev->dev, "iteration %d of Core En/ROM load failed: %d\n",
340 			i, ret);
341 		dev_dbg(sdev->dev, "Error code=0x%x: FW status=0x%x\n",
342 			snd_sof_dsp_read(sdev, HDA_DSP_BAR,
343 					 HDA_DSP_SRAM_REG_ROM_ERROR),
344 			snd_sof_dsp_read(sdev, HDA_DSP_BAR,
345 					 HDA_DSP_SRAM_REG_ROM_STATUS));
346 	}
347 
348 	if (i == HDA_FW_BOOT_ATTEMPTS) {
349 		dev_err(sdev->dev, "error: dsp init failed after %d attempts with err: %d\n",
350 			i, ret);
351 		goto cleanup;
352 	}
353 
354 	/*
355 	 * When a SoundWire link is in clock stop state, a Slave
356 	 * device may trigger in-band wakes for events such as jack
357 	 * insertion or acoustic event detection. This event will lead
358 	 * to a WAKEEN interrupt, handled by the PCI device and routed
359 	 * to PME if the PCI device is in D3. The resume function in
360 	 * audio PCI driver will be invoked by ACPI for PME event and
361 	 * initialize the device and process WAKEEN interrupt.
362 	 *
363 	 * The WAKEEN interrupt should be processed ASAP to prevent an
364 	 * interrupt flood, otherwise other interrupts, such IPC,
365 	 * cannot work normally.  The WAKEEN is handled after the ROM
366 	 * is initialized successfully, which ensures power rails are
367 	 * enabled before accessing the SoundWire SHIM registers
368 	 */
369 	if (!sdev->first_boot)
370 		hda_sdw_process_wakeen(sdev);
371 
372 	/*
373 	 * at this point DSP ROM has been initialized and
374 	 * should be ready for code loading and firmware boot
375 	 */
376 	ret = cl_copy_fw(sdev, stream);
377 	if (!ret)
378 		dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
379 	else
380 		dev_err(sdev->dev, "error: load fw failed ret: %d\n", ret);
381 
382 cleanup:
383 	/*
384 	 * Perform codeloader stream cleanup.
385 	 * This should be done even if firmware loading fails.
386 	 * If the cleanup also fails, we return the initial error
387 	 */
388 	ret1 = cl_cleanup(sdev, &sdev->dmab, stream);
389 	if (ret1 < 0) {
390 		dev_err(sdev->dev, "error: Code loader DSP cleanup failed\n");
391 
392 		/* set return value to indicate cleanup failure */
393 		if (!ret)
394 			ret = ret1;
395 	}
396 
397 	/*
398 	 * return master core id if both fw copy
399 	 * and stream clean up are successful
400 	 */
401 	if (!ret)
402 		return chip_info->init_core_mask;
403 
404 	/* dump dsp registers and disable DSP upon error */
405 err:
406 	hda_dsp_dump(sdev, SOF_DBG_REGS | SOF_DBG_PCI | SOF_DBG_MBOX);
407 
408 	/* disable DSP */
409 	snd_sof_dsp_update_bits(sdev, HDA_DSP_PP_BAR,
410 				SOF_HDA_REG_PP_PPCTL,
411 				SOF_HDA_PPCTL_GPROCEN, 0);
412 	return ret;
413 }
414 
415 /* pre fw run operations */
416 int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
417 {
418 	/* disable clock gating and power gating */
419 	return hda_dsp_ctrl_clock_power_gating(sdev, false);
420 }
421 
422 /* post fw run operations */
423 int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
424 {
425 	int ret;
426 
427 	if (sdev->first_boot) {
428 		ret = hda_sdw_startup(sdev);
429 		if (ret < 0) {
430 			dev_err(sdev->dev,
431 				"error: could not startup SoundWire links\n");
432 			return ret;
433 		}
434 	}
435 
436 	hda_sdw_int_enable(sdev, true);
437 
438 	/* re-enable clock gating and power gating */
439 	return hda_dsp_ctrl_clock_power_gating(sdev, true);
440 }
441