1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) 2 // 3 // This file is provided under a dual BSD/GPLv2 license. When using or 4 // redistributing this file, you may do so under either license. 5 // 6 // Copyright(c) 2018 Intel Corporation. All rights reserved. 7 // 8 // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com> 9 // Ranjani Sridharan <ranjani.sridharan@linux.intel.com> 10 // Rander Wang <rander.wang@intel.com> 11 // Keyon Jie <yang.jie@linux.intel.com> 12 // 13 14 /* 15 * Hardware interface for generic Intel audio DSP HDA IP 16 */ 17 18 #include <linux/module.h> 19 #include <sound/hdaudio_ext.h> 20 #include <sound/hda_register.h> 21 #include <sound/hda-mlink.h> 22 #include <trace/events/sof_intel.h> 23 #include "../sof-audio.h" 24 #include "../ops.h" 25 #include "hda.h" 26 #include "hda-ipc.h" 27 28 static bool hda_enable_trace_D0I3_S0; 29 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG) 30 module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444); 31 MODULE_PARM_DESC(enable_trace_D0I3_S0, 32 "SOF HDA enable trace when the DSP is in D0I3 in S0"); 33 #endif 34 35 /* 36 * DSP Core control. 37 */ 38 39 static int hda_dsp_core_reset_enter(struct snd_sof_dev *sdev, unsigned int core_mask) 40 { 41 u32 adspcs; 42 u32 reset; 43 int ret; 44 45 /* set reset bits for cores */ 46 reset = HDA_DSP_ADSPCS_CRST_MASK(core_mask); 47 snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, 48 HDA_DSP_REG_ADSPCS, 49 reset, reset); 50 51 /* poll with timeout to check if operation successful */ 52 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 53 HDA_DSP_REG_ADSPCS, adspcs, 54 ((adspcs & reset) == reset), 55 HDA_DSP_REG_POLL_INTERVAL_US, 56 HDA_DSP_RESET_TIMEOUT_US); 57 if (ret < 0) { 58 dev_err(sdev->dev, 59 "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", 60 __func__); 61 return ret; 62 } 63 64 /* has core entered reset ? */ 65 adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, 66 HDA_DSP_REG_ADSPCS); 67 if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 68 HDA_DSP_ADSPCS_CRST_MASK(core_mask)) { 69 dev_err(sdev->dev, 70 "error: reset enter failed: core_mask %x adspcs 0x%x\n", 71 core_mask, adspcs); 72 ret = -EIO; 73 } 74 75 return ret; 76 } 77 78 static int hda_dsp_core_reset_leave(struct snd_sof_dev *sdev, unsigned int core_mask) 79 { 80 unsigned int crst; 81 u32 adspcs; 82 int ret; 83 84 /* clear reset bits for cores */ 85 snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, 86 HDA_DSP_REG_ADSPCS, 87 HDA_DSP_ADSPCS_CRST_MASK(core_mask), 88 0); 89 90 /* poll with timeout to check if operation successful */ 91 crst = HDA_DSP_ADSPCS_CRST_MASK(core_mask); 92 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 93 HDA_DSP_REG_ADSPCS, adspcs, 94 !(adspcs & crst), 95 HDA_DSP_REG_POLL_INTERVAL_US, 96 HDA_DSP_RESET_TIMEOUT_US); 97 98 if (ret < 0) { 99 dev_err(sdev->dev, 100 "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", 101 __func__); 102 return ret; 103 } 104 105 /* has core left reset ? */ 106 adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, 107 HDA_DSP_REG_ADSPCS); 108 if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 0) { 109 dev_err(sdev->dev, 110 "error: reset leave failed: core_mask %x adspcs 0x%x\n", 111 core_mask, adspcs); 112 ret = -EIO; 113 } 114 115 return ret; 116 } 117 118 int hda_dsp_core_stall_reset(struct snd_sof_dev *sdev, unsigned int core_mask) 119 { 120 /* stall core */ 121 snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, 122 HDA_DSP_REG_ADSPCS, 123 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask), 124 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)); 125 126 /* set reset state */ 127 return hda_dsp_core_reset_enter(sdev, core_mask); 128 } 129 130 bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev, unsigned int core_mask) 131 { 132 int val; 133 bool is_enable; 134 135 val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS); 136 137 #define MASK_IS_EQUAL(v, m, field) ({ \ 138 u32 _m = field(m); \ 139 ((v) & _m) == _m; \ 140 }) 141 142 is_enable = MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_CPA_MASK) && 143 MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_SPA_MASK) && 144 !(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) && 145 !(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)); 146 147 #undef MASK_IS_EQUAL 148 149 dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n", 150 is_enable, core_mask); 151 152 return is_enable; 153 } 154 155 int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask) 156 { 157 int ret; 158 159 /* leave reset state */ 160 ret = hda_dsp_core_reset_leave(sdev, core_mask); 161 if (ret < 0) 162 return ret; 163 164 /* run core */ 165 dev_dbg(sdev->dev, "unstall/run core: core_mask = %x\n", core_mask); 166 snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, 167 HDA_DSP_REG_ADSPCS, 168 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask), 169 0); 170 171 /* is core now running ? */ 172 if (!hda_dsp_core_is_enabled(sdev, core_mask)) { 173 hda_dsp_core_stall_reset(sdev, core_mask); 174 dev_err(sdev->dev, "error: DSP start core failed: core_mask %x\n", 175 core_mask); 176 ret = -EIO; 177 } 178 179 return ret; 180 } 181 182 /* 183 * Power Management. 184 */ 185 186 int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask) 187 { 188 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 189 const struct sof_intel_dsp_desc *chip = hda->desc; 190 unsigned int cpa; 191 u32 adspcs; 192 int ret; 193 194 /* restrict core_mask to host managed cores mask */ 195 core_mask &= chip->host_managed_cores_mask; 196 /* return if core_mask is not valid */ 197 if (!core_mask) 198 return 0; 199 200 /* update bits */ 201 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS, 202 HDA_DSP_ADSPCS_SPA_MASK(core_mask), 203 HDA_DSP_ADSPCS_SPA_MASK(core_mask)); 204 205 /* poll with timeout to check if operation successful */ 206 cpa = HDA_DSP_ADSPCS_CPA_MASK(core_mask); 207 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 208 HDA_DSP_REG_ADSPCS, adspcs, 209 (adspcs & cpa) == cpa, 210 HDA_DSP_REG_POLL_INTERVAL_US, 211 HDA_DSP_RESET_TIMEOUT_US); 212 if (ret < 0) { 213 dev_err(sdev->dev, 214 "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", 215 __func__); 216 return ret; 217 } 218 219 /* did core power up ? */ 220 adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR, 221 HDA_DSP_REG_ADSPCS); 222 if ((adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) != 223 HDA_DSP_ADSPCS_CPA_MASK(core_mask)) { 224 dev_err(sdev->dev, 225 "error: power up core failed core_mask %xadspcs 0x%x\n", 226 core_mask, adspcs); 227 ret = -EIO; 228 } 229 230 return ret; 231 } 232 233 static int hda_dsp_core_power_down(struct snd_sof_dev *sdev, unsigned int core_mask) 234 { 235 u32 adspcs; 236 int ret; 237 238 /* update bits */ 239 snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, 240 HDA_DSP_REG_ADSPCS, 241 HDA_DSP_ADSPCS_SPA_MASK(core_mask), 0); 242 243 ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, 244 HDA_DSP_REG_ADSPCS, adspcs, 245 !(adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)), 246 HDA_DSP_REG_POLL_INTERVAL_US, 247 HDA_DSP_PD_TIMEOUT * USEC_PER_MSEC); 248 if (ret < 0) 249 dev_err(sdev->dev, 250 "error: %s: timeout on HDA_DSP_REG_ADSPCS read\n", 251 __func__); 252 253 return ret; 254 } 255 256 int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask) 257 { 258 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 259 const struct sof_intel_dsp_desc *chip = hda->desc; 260 int ret; 261 262 /* restrict core_mask to host managed cores mask */ 263 core_mask &= chip->host_managed_cores_mask; 264 265 /* return if core_mask is not valid or cores are already enabled */ 266 if (!core_mask || hda_dsp_core_is_enabled(sdev, core_mask)) 267 return 0; 268 269 /* power up */ 270 ret = hda_dsp_core_power_up(sdev, core_mask); 271 if (ret < 0) { 272 dev_err(sdev->dev, "error: dsp core power up failed: core_mask %x\n", 273 core_mask); 274 return ret; 275 } 276 277 return hda_dsp_core_run(sdev, core_mask); 278 } 279 280 int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev, 281 unsigned int core_mask) 282 { 283 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 284 const struct sof_intel_dsp_desc *chip = hda->desc; 285 int ret; 286 287 /* restrict core_mask to host managed cores mask */ 288 core_mask &= chip->host_managed_cores_mask; 289 290 /* return if core_mask is not valid */ 291 if (!core_mask) 292 return 0; 293 294 /* place core in reset prior to power down */ 295 ret = hda_dsp_core_stall_reset(sdev, core_mask); 296 if (ret < 0) { 297 dev_err(sdev->dev, "error: dsp core reset failed: core_mask %x\n", 298 core_mask); 299 return ret; 300 } 301 302 /* power down core */ 303 ret = hda_dsp_core_power_down(sdev, core_mask); 304 if (ret < 0) { 305 dev_err(sdev->dev, "error: dsp core power down fail mask %x: %d\n", 306 core_mask, ret); 307 return ret; 308 } 309 310 /* make sure we are in OFF state */ 311 if (hda_dsp_core_is_enabled(sdev, core_mask)) { 312 dev_err(sdev->dev, "error: dsp core disable fail mask %x: %d\n", 313 core_mask, ret); 314 ret = -EIO; 315 } 316 317 return ret; 318 } 319 320 void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev) 321 { 322 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 323 const struct sof_intel_dsp_desc *chip = hda->desc; 324 325 if (sdev->dspless_mode_selected) 326 return; 327 328 /* enable IPC DONE and BUSY interrupts */ 329 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, 330 HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY, 331 HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY); 332 333 /* enable IPC interrupt */ 334 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, 335 HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC); 336 } 337 338 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev) 339 { 340 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 341 const struct sof_intel_dsp_desc *chip = hda->desc; 342 343 if (sdev->dspless_mode_selected) 344 return; 345 346 /* disable IPC interrupt */ 347 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, 348 HDA_DSP_ADSPIC_IPC, 0); 349 350 /* disable IPC BUSY and DONE interrupt */ 351 snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl, 352 HDA_DSP_REG_HIPCCTL_BUSY | HDA_DSP_REG_HIPCCTL_DONE, 0); 353 } 354 355 static int hda_dsp_wait_d0i3c_done(struct snd_sof_dev *sdev) 356 { 357 int retry = HDA_DSP_REG_POLL_RETRY_COUNT; 358 struct snd_sof_pdata *pdata = sdev->pdata; 359 const struct sof_intel_dsp_desc *chip; 360 361 chip = get_chip_info(pdata); 362 while (snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset) & 363 SOF_HDA_VS_D0I3C_CIP) { 364 if (!retry--) 365 return -ETIMEDOUT; 366 usleep_range(10, 15); 367 } 368 369 return 0; 370 } 371 372 static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags) 373 { 374 const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); 375 376 if (pm_ops && pm_ops->set_pm_gate) 377 return pm_ops->set_pm_gate(sdev, flags); 378 379 return 0; 380 } 381 382 static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value) 383 { 384 struct snd_sof_pdata *pdata = sdev->pdata; 385 const struct sof_intel_dsp_desc *chip; 386 int ret; 387 u8 reg; 388 389 chip = get_chip_info(pdata); 390 391 /* Write to D0I3C after Command-In-Progress bit is cleared */ 392 ret = hda_dsp_wait_d0i3c_done(sdev); 393 if (ret < 0) { 394 dev_err(sdev->dev, "CIP timeout before D0I3C update!\n"); 395 return ret; 396 } 397 398 /* Update D0I3C register */ 399 snd_sof_dsp_update8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset, 400 SOF_HDA_VS_D0I3C_I3, value); 401 402 /* 403 * The value written to the D0I3C::I3 bit may not be taken into account immediately. 404 * A delay is recommended before checking if D0I3C::CIP is cleared 405 */ 406 usleep_range(30, 40); 407 408 /* Wait for cmd in progress to be cleared before exiting the function */ 409 ret = hda_dsp_wait_d0i3c_done(sdev); 410 if (ret < 0) { 411 dev_err(sdev->dev, "CIP timeout after D0I3C update!\n"); 412 return ret; 413 } 414 415 reg = snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset); 416 /* Confirm d0i3 state changed with paranoia check */ 417 if ((reg ^ value) & SOF_HDA_VS_D0I3C_I3) { 418 dev_err(sdev->dev, "failed to update D0I3C!\n"); 419 return -EIO; 420 } 421 422 trace_sof_intel_D0I3C_updated(sdev, reg); 423 424 return 0; 425 } 426 427 /* 428 * d0i3 streaming is enabled if all the active streams can 429 * work in d0i3 state and playback is enabled 430 */ 431 static bool hda_dsp_d0i3_streaming_applicable(struct snd_sof_dev *sdev) 432 { 433 struct snd_pcm_substream *substream; 434 struct snd_sof_pcm *spcm; 435 bool playback_active = false; 436 int dir; 437 438 list_for_each_entry(spcm, &sdev->pcm_list, list) { 439 for_each_pcm_streams(dir) { 440 substream = spcm->stream[dir].substream; 441 if (!substream || !substream->runtime) 442 continue; 443 444 if (!spcm->stream[dir].d0i3_compatible) 445 return false; 446 447 if (dir == SNDRV_PCM_STREAM_PLAYBACK) 448 playback_active = true; 449 } 450 } 451 452 return playback_active; 453 } 454 455 static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev, 456 const struct sof_dsp_power_state *target_state) 457 { 458 u32 flags = 0; 459 int ret; 460 u8 value = 0; 461 462 /* 463 * Sanity check for illegal state transitions 464 * The only allowed transitions are: 465 * 1. D3 -> D0I0 466 * 2. D0I0 -> D0I3 467 * 3. D0I3 -> D0I0 468 */ 469 switch (sdev->dsp_power_state.state) { 470 case SOF_DSP_PM_D0: 471 /* Follow the sequence below for D0 substate transitions */ 472 break; 473 case SOF_DSP_PM_D3: 474 /* Follow regular flow for D3 -> D0 transition */ 475 return 0; 476 default: 477 dev_err(sdev->dev, "error: transition from %d to %d not allowed\n", 478 sdev->dsp_power_state.state, target_state->state); 479 return -EINVAL; 480 } 481 482 /* Set flags and register value for D0 target substate */ 483 if (target_state->substate == SOF_HDA_DSP_PM_D0I3) { 484 value = SOF_HDA_VS_D0I3C_I3; 485 486 /* 487 * Trace DMA need to be disabled when the DSP enters 488 * D0I3 for S0Ix suspend, but it can be kept enabled 489 * when the DSP enters D0I3 while the system is in S0 490 * for debug purpose. 491 */ 492 if (!sdev->fw_trace_is_supported || 493 !hda_enable_trace_D0I3_S0 || 494 sdev->system_suspend_target != SOF_SUSPEND_NONE) 495 flags = HDA_PM_NO_DMA_TRACE; 496 497 if (hda_dsp_d0i3_streaming_applicable(sdev)) 498 flags |= HDA_PM_PG_STREAMING; 499 } else { 500 /* prevent power gating in D0I0 */ 501 flags = HDA_PM_PPG; 502 } 503 504 /* update D0I3C register */ 505 ret = hda_dsp_update_d0i3c_register(sdev, value); 506 if (ret < 0) 507 return ret; 508 509 /* 510 * Notify the DSP of the state change. 511 * If this IPC fails, revert the D0I3C register update in order 512 * to prevent partial state change. 513 */ 514 ret = hda_dsp_send_pm_gate_ipc(sdev, flags); 515 if (ret < 0) { 516 dev_err(sdev->dev, 517 "error: PM_GATE ipc error %d\n", ret); 518 goto revert; 519 } 520 521 return ret; 522 523 revert: 524 /* fallback to the previous register value */ 525 value = value ? 0 : SOF_HDA_VS_D0I3C_I3; 526 527 /* 528 * This can fail but return the IPC error to signal that 529 * the state change failed. 530 */ 531 hda_dsp_update_d0i3c_register(sdev, value); 532 533 return ret; 534 } 535 536 /* helper to log DSP state */ 537 static void hda_dsp_state_log(struct snd_sof_dev *sdev) 538 { 539 switch (sdev->dsp_power_state.state) { 540 case SOF_DSP_PM_D0: 541 switch (sdev->dsp_power_state.substate) { 542 case SOF_HDA_DSP_PM_D0I0: 543 dev_dbg(sdev->dev, "Current DSP power state: D0I0\n"); 544 break; 545 case SOF_HDA_DSP_PM_D0I3: 546 dev_dbg(sdev->dev, "Current DSP power state: D0I3\n"); 547 break; 548 default: 549 dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n", 550 sdev->dsp_power_state.substate); 551 break; 552 } 553 break; 554 case SOF_DSP_PM_D1: 555 dev_dbg(sdev->dev, "Current DSP power state: D1\n"); 556 break; 557 case SOF_DSP_PM_D2: 558 dev_dbg(sdev->dev, "Current DSP power state: D2\n"); 559 break; 560 case SOF_DSP_PM_D3: 561 dev_dbg(sdev->dev, "Current DSP power state: D3\n"); 562 break; 563 default: 564 dev_dbg(sdev->dev, "Unknown DSP power state: %d\n", 565 sdev->dsp_power_state.state); 566 break; 567 } 568 } 569 570 /* 571 * All DSP power state transitions are initiated by the driver. 572 * If the requested state change fails, the error is simply returned. 573 * Further state transitions are attempted only when the set_power_save() op 574 * is called again either because of a new IPC sent to the DSP or 575 * during system suspend/resume. 576 */ 577 static int hda_dsp_set_power_state(struct snd_sof_dev *sdev, 578 const struct sof_dsp_power_state *target_state) 579 { 580 int ret = 0; 581 582 switch (target_state->state) { 583 case SOF_DSP_PM_D0: 584 ret = hda_dsp_set_D0_state(sdev, target_state); 585 break; 586 case SOF_DSP_PM_D3: 587 /* The only allowed transition is: D0I0 -> D3 */ 588 if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 && 589 sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0) 590 break; 591 592 dev_err(sdev->dev, 593 "error: transition from %d to %d not allowed\n", 594 sdev->dsp_power_state.state, target_state->state); 595 return -EINVAL; 596 default: 597 dev_err(sdev->dev, "error: target state unsupported %d\n", 598 target_state->state); 599 return -EINVAL; 600 } 601 if (ret < 0) { 602 dev_err(sdev->dev, 603 "failed to set requested target DSP state %d substate %d\n", 604 target_state->state, target_state->substate); 605 return ret; 606 } 607 608 sdev->dsp_power_state = *target_state; 609 hda_dsp_state_log(sdev); 610 return ret; 611 } 612 613 int hda_dsp_set_power_state_ipc3(struct snd_sof_dev *sdev, 614 const struct sof_dsp_power_state *target_state) 615 { 616 /* 617 * When the DSP is already in D0I3 and the target state is D0I3, 618 * it could be the case that the DSP is in D0I3 during S0 619 * and the system is suspending to S0Ix. Therefore, 620 * hda_dsp_set_D0_state() must be called to disable trace DMA 621 * by sending the PM_GATE IPC to the FW. 622 */ 623 if (target_state->substate == SOF_HDA_DSP_PM_D0I3 && 624 sdev->system_suspend_target == SOF_SUSPEND_S0IX) 625 return hda_dsp_set_power_state(sdev, target_state); 626 627 /* 628 * For all other cases, return without doing anything if 629 * the DSP is already in the target state. 630 */ 631 if (target_state->state == sdev->dsp_power_state.state && 632 target_state->substate == sdev->dsp_power_state.substate) 633 return 0; 634 635 return hda_dsp_set_power_state(sdev, target_state); 636 } 637 638 int hda_dsp_set_power_state_ipc4(struct snd_sof_dev *sdev, 639 const struct sof_dsp_power_state *target_state) 640 { 641 /* Return without doing anything if the DSP is already in the target state */ 642 if (target_state->state == sdev->dsp_power_state.state && 643 target_state->substate == sdev->dsp_power_state.substate) 644 return 0; 645 646 return hda_dsp_set_power_state(sdev, target_state); 647 } 648 649 /* 650 * Audio DSP states may transform as below:- 651 * 652 * Opportunistic D0I3 in S0 653 * Runtime +---------------------+ Delayed D0i3 work timeout 654 * suspend | +--------------------+ 655 * +------------+ D0I0(active) | | 656 * | | <---------------+ | 657 * | +--------> | New IPC | | 658 * | |Runtime +--^--+---------^--+--+ (via mailbox) | | 659 * | |resume | | | | | | 660 * | | | | | | | | 661 * | | System| | | | | | 662 * | | resume| | S3/S0IX | | | | 663 * | | | | suspend | | S0IX | | 664 * | | | | | |suspend | | 665 * | | | | | | | | 666 * | | | | | | | | 667 * +-v---+-----------+--v-------+ | | +------+----v----+ 668 * | | | +-----------> | 669 * | D3 (suspended) | | | D0I3 | 670 * | | +--------------+ | 671 * | | System resume | | 672 * +----------------------------+ +----------------+ 673 * 674 * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams 675 * ignored the suspend trigger. Otherwise the DSP 676 * is in D3. 677 */ 678 679 static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend) 680 { 681 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 682 const struct sof_intel_dsp_desc *chip = hda->desc; 683 struct hdac_bus *bus = sof_to_bus(sdev); 684 bool imr_lost = false; 685 int ret, j; 686 687 /* 688 * The memory used for IMR boot loses its content in deeper than S3 689 * state on CAVS platforms. 690 * On ACE platforms due to the system architecture the IMR content is 691 * lost at S3 state already, they are tailored for s2idle use. 692 * We must not try IMR boot on next power up in these cases as it will 693 * fail. 694 */ 695 if (sdev->system_suspend_target > SOF_SUSPEND_S3 || 696 (chip->hw_ip_version >= SOF_INTEL_ACE_1_0 && 697 sdev->system_suspend_target == SOF_SUSPEND_S3)) 698 imr_lost = true; 699 700 /* 701 * In case of firmware crash or boot failure set the skip_imr_boot to true 702 * as well in order to try to re-load the firmware to do a 'cold' boot. 703 */ 704 if (imr_lost || sdev->fw_state == SOF_FW_CRASHED || 705 sdev->fw_state == SOF_FW_BOOT_FAILED) 706 hda->skip_imr_boot = true; 707 708 ret = chip->disable_interrupts(sdev); 709 if (ret < 0) 710 return ret; 711 712 /* make sure that no irq handler is pending before shutdown */ 713 synchronize_irq(sdev->ipc_irq); 714 715 hda_codec_jack_wake_enable(sdev, runtime_suspend); 716 717 /* power down all hda links */ 718 hda_bus_ml_suspend(bus); 719 720 if (sdev->dspless_mode_selected) 721 goto skip_dsp; 722 723 ret = chip->power_down_dsp(sdev); 724 if (ret < 0) { 725 dev_err(sdev->dev, "failed to power down DSP during suspend\n"); 726 return ret; 727 } 728 729 /* reset ref counts for all cores */ 730 for (j = 0; j < chip->cores_num; j++) 731 sdev->dsp_core_ref_count[j] = 0; 732 733 /* disable ppcap interrupt */ 734 hda_dsp_ctrl_ppcap_enable(sdev, false); 735 hda_dsp_ctrl_ppcap_int_enable(sdev, false); 736 skip_dsp: 737 738 /* disable hda bus irq and streams */ 739 hda_dsp_ctrl_stop_chip(sdev); 740 741 /* disable LP retention mode */ 742 snd_sof_pci_update_bits(sdev, PCI_PGCTL, 743 PCI_PGCTL_LSRMD_MASK, PCI_PGCTL_LSRMD_MASK); 744 745 /* reset controller */ 746 ret = hda_dsp_ctrl_link_reset(sdev, true); 747 if (ret < 0) { 748 dev_err(sdev->dev, 749 "error: failed to reset controller during suspend\n"); 750 return ret; 751 } 752 753 /* display codec can powered off after link reset */ 754 hda_codec_i915_display_power(sdev, false); 755 756 return 0; 757 } 758 759 static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume) 760 { 761 int ret; 762 763 /* display codec must be powered before link reset */ 764 hda_codec_i915_display_power(sdev, true); 765 766 /* 767 * clear TCSEL to clear playback on some HD Audio 768 * codecs. PCI TCSEL is defined in the Intel manuals. 769 */ 770 snd_sof_pci_update_bits(sdev, PCI_TCSEL, 0x07, 0); 771 772 /* reset and start hda controller */ 773 ret = hda_dsp_ctrl_init_chip(sdev); 774 if (ret < 0) { 775 dev_err(sdev->dev, 776 "error: failed to start controller after resume\n"); 777 goto cleanup; 778 } 779 780 /* check jack status */ 781 if (runtime_resume) { 782 hda_codec_jack_wake_enable(sdev, false); 783 if (sdev->system_suspend_target == SOF_SUSPEND_NONE) 784 hda_codec_jack_check(sdev); 785 } 786 787 if (!sdev->dspless_mode_selected) { 788 /* enable ppcap interrupt */ 789 hda_dsp_ctrl_ppcap_enable(sdev, true); 790 hda_dsp_ctrl_ppcap_int_enable(sdev, true); 791 } 792 793 cleanup: 794 /* display codec can powered off after controller init */ 795 hda_codec_i915_display_power(sdev, false); 796 797 return 0; 798 } 799 800 int hda_dsp_resume(struct snd_sof_dev *sdev) 801 { 802 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 803 struct hdac_bus *bus = sof_to_bus(sdev); 804 struct pci_dev *pci = to_pci_dev(sdev->dev); 805 const struct sof_dsp_power_state target_state = { 806 .state = SOF_DSP_PM_D0, 807 .substate = SOF_HDA_DSP_PM_D0I0, 808 }; 809 int ret; 810 811 /* resume from D0I3 */ 812 if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) { 813 ret = hda_bus_ml_resume(bus); 814 if (ret < 0) { 815 dev_err(sdev->dev, 816 "error %d in %s: failed to power up links", 817 ret, __func__); 818 return ret; 819 } 820 821 /* set up CORB/RIRB buffers if was on before suspend */ 822 hda_codec_resume_cmd_io(sdev); 823 824 /* Set DSP power state */ 825 ret = snd_sof_dsp_set_power_state(sdev, &target_state); 826 if (ret < 0) { 827 dev_err(sdev->dev, "error: setting dsp state %d substate %d\n", 828 target_state.state, target_state.substate); 829 return ret; 830 } 831 832 /* restore L1SEN bit */ 833 if (hda->l1_disabled) 834 snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, 835 HDA_VS_INTEL_EM2, 836 HDA_VS_INTEL_EM2_L1SEN, 0); 837 838 /* restore and disable the system wakeup */ 839 pci_restore_state(pci); 840 disable_irq_wake(pci->irq); 841 return 0; 842 } 843 844 /* init hda controller. DSP cores will be powered up during fw boot */ 845 ret = hda_resume(sdev, false); 846 if (ret < 0) 847 return ret; 848 849 return snd_sof_dsp_set_power_state(sdev, &target_state); 850 } 851 852 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev) 853 { 854 const struct sof_dsp_power_state target_state = { 855 .state = SOF_DSP_PM_D0, 856 }; 857 int ret; 858 859 /* init hda controller. DSP cores will be powered up during fw boot */ 860 ret = hda_resume(sdev, true); 861 if (ret < 0) 862 return ret; 863 864 return snd_sof_dsp_set_power_state(sdev, &target_state); 865 } 866 867 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev) 868 { 869 struct hdac_bus *hbus = sof_to_bus(sdev); 870 871 if (hbus->codec_powered) { 872 dev_dbg(sdev->dev, "some codecs still powered (%08X), not idle\n", 873 (unsigned int)hbus->codec_powered); 874 return -EBUSY; 875 } 876 877 return 0; 878 } 879 880 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev) 881 { 882 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 883 const struct sof_dsp_power_state target_state = { 884 .state = SOF_DSP_PM_D3, 885 }; 886 int ret; 887 888 if (!sdev->dspless_mode_selected) { 889 /* cancel any attempt for DSP D0I3 */ 890 cancel_delayed_work_sync(&hda->d0i3_work); 891 } 892 893 /* stop hda controller and power dsp off */ 894 ret = hda_suspend(sdev, true); 895 if (ret < 0) 896 return ret; 897 898 return snd_sof_dsp_set_power_state(sdev, &target_state); 899 } 900 901 int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state) 902 { 903 struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; 904 struct hdac_bus *bus = sof_to_bus(sdev); 905 struct pci_dev *pci = to_pci_dev(sdev->dev); 906 const struct sof_dsp_power_state target_dsp_state = { 907 .state = target_state, 908 .substate = target_state == SOF_DSP_PM_D0 ? 909 SOF_HDA_DSP_PM_D0I3 : 0, 910 }; 911 int ret; 912 913 if (!sdev->dspless_mode_selected) { 914 /* cancel any attempt for DSP D0I3 */ 915 cancel_delayed_work_sync(&hda->d0i3_work); 916 } 917 918 if (target_state == SOF_DSP_PM_D0) { 919 /* Set DSP power state */ 920 ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state); 921 if (ret < 0) { 922 dev_err(sdev->dev, "error: setting dsp state %d substate %d\n", 923 target_dsp_state.state, 924 target_dsp_state.substate); 925 return ret; 926 } 927 928 /* enable L1SEN to make sure the system can enter S0Ix */ 929 if (hda->l1_disabled) 930 snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, HDA_VS_INTEL_EM2, 931 HDA_VS_INTEL_EM2_L1SEN, HDA_VS_INTEL_EM2_L1SEN); 932 933 /* stop the CORB/RIRB DMA if it is On */ 934 hda_codec_suspend_cmd_io(sdev); 935 936 /* no link can be powered in s0ix state */ 937 ret = hda_bus_ml_suspend(bus); 938 if (ret < 0) { 939 dev_err(sdev->dev, 940 "error %d in %s: failed to power down links", 941 ret, __func__); 942 return ret; 943 } 944 945 /* enable the system waking up via IPC IRQ */ 946 enable_irq_wake(pci->irq); 947 pci_save_state(pci); 948 return 0; 949 } 950 951 /* stop hda controller and power dsp off */ 952 ret = hda_suspend(sdev, false); 953 if (ret < 0) { 954 dev_err(bus->dev, "error: suspending dsp\n"); 955 return ret; 956 } 957 958 return snd_sof_dsp_set_power_state(sdev, &target_dsp_state); 959 } 960 961 static unsigned int hda_dsp_check_for_dma_streams(struct snd_sof_dev *sdev) 962 { 963 struct hdac_bus *bus = sof_to_bus(sdev); 964 struct hdac_stream *s; 965 unsigned int active_streams = 0; 966 int sd_offset; 967 u32 val; 968 969 list_for_each_entry(s, &bus->stream_list, list) { 970 sd_offset = SOF_STREAM_SD_OFFSET(s); 971 val = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR, 972 sd_offset); 973 if (val & SOF_HDA_SD_CTL_DMA_START) 974 active_streams |= BIT(s->index); 975 } 976 977 return active_streams; 978 } 979 980 static int hda_dsp_s5_quirk(struct snd_sof_dev *sdev) 981 { 982 int ret; 983 984 /* 985 * Do not assume a certain timing between the prior 986 * suspend flow, and running of this quirk function. 987 * This is needed if the controller was just put 988 * to reset before calling this function. 989 */ 990 usleep_range(500, 1000); 991 992 /* 993 * Take controller out of reset to flush DMA 994 * transactions. 995 */ 996 ret = hda_dsp_ctrl_link_reset(sdev, false); 997 if (ret < 0) 998 return ret; 999 1000 usleep_range(500, 1000); 1001 1002 /* Restore state for shutdown, back to reset */ 1003 ret = hda_dsp_ctrl_link_reset(sdev, true); 1004 if (ret < 0) 1005 return ret; 1006 1007 return ret; 1008 } 1009 1010 int hda_dsp_shutdown_dma_flush(struct snd_sof_dev *sdev) 1011 { 1012 unsigned int active_streams; 1013 int ret, ret2; 1014 1015 /* check if DMA cleanup has been successful */ 1016 active_streams = hda_dsp_check_for_dma_streams(sdev); 1017 1018 sdev->system_suspend_target = SOF_SUSPEND_S3; 1019 ret = snd_sof_suspend(sdev->dev); 1020 1021 if (active_streams) { 1022 dev_warn(sdev->dev, 1023 "There were active DSP streams (%#x) at shutdown, trying to recover\n", 1024 active_streams); 1025 ret2 = hda_dsp_s5_quirk(sdev); 1026 if (ret2 < 0) 1027 dev_err(sdev->dev, "shutdown recovery failed (%d)\n", ret2); 1028 } 1029 1030 return ret; 1031 } 1032 1033 int hda_dsp_shutdown(struct snd_sof_dev *sdev) 1034 { 1035 sdev->system_suspend_target = SOF_SUSPEND_S3; 1036 return snd_sof_suspend(sdev->dev); 1037 } 1038 1039 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev) 1040 { 1041 int ret; 1042 1043 /* make sure all DAI resources are freed */ 1044 ret = hda_dsp_dais_suspend(sdev); 1045 if (ret < 0) 1046 dev_warn(sdev->dev, "%s: failure in hda_dsp_dais_suspend\n", __func__); 1047 1048 return ret; 1049 } 1050 1051 void hda_dsp_d0i3_work(struct work_struct *work) 1052 { 1053 struct sof_intel_hda_dev *hdev = container_of(work, 1054 struct sof_intel_hda_dev, 1055 d0i3_work.work); 1056 struct hdac_bus *bus = &hdev->hbus.core; 1057 struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev); 1058 struct sof_dsp_power_state target_state = { 1059 .state = SOF_DSP_PM_D0, 1060 .substate = SOF_HDA_DSP_PM_D0I3, 1061 }; 1062 int ret; 1063 1064 /* DSP can enter D0I3 iff only D0I3-compatible streams are active */ 1065 if (!snd_sof_dsp_only_d0i3_compatible_stream_active(sdev)) 1066 /* remain in D0I0 */ 1067 return; 1068 1069 /* This can fail but error cannot be propagated */ 1070 ret = snd_sof_dsp_set_power_state(sdev, &target_state); 1071 if (ret < 0) 1072 dev_err_ratelimited(sdev->dev, 1073 "error: failed to set DSP state %d substate %d\n", 1074 target_state.state, target_state.substate); 1075 } 1076 1077 int hda_dsp_core_get(struct snd_sof_dev *sdev, int core) 1078 { 1079 const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm; 1080 int ret, ret1; 1081 1082 /* power up core */ 1083 ret = hda_dsp_enable_core(sdev, BIT(core)); 1084 if (ret < 0) { 1085 dev_err(sdev->dev, "failed to power up core %d with err: %d\n", 1086 core, ret); 1087 return ret; 1088 } 1089 1090 /* No need to send IPC for primary core or if FW boot is not complete */ 1091 if (sdev->fw_state != SOF_FW_BOOT_COMPLETE || core == SOF_DSP_PRIMARY_CORE) 1092 return 0; 1093 1094 /* No need to continue the set_core_state ops is not available */ 1095 if (!pm_ops->set_core_state) 1096 return 0; 1097 1098 /* Now notify DSP for secondary cores */ 1099 ret = pm_ops->set_core_state(sdev, core, true); 1100 if (ret < 0) { 1101 dev_err(sdev->dev, "failed to enable secondary core '%d' failed with %d\n", 1102 core, ret); 1103 goto power_down; 1104 } 1105 1106 return ret; 1107 1108 power_down: 1109 /* power down core if it is host managed and return the original error if this fails too */ 1110 ret1 = hda_dsp_core_reset_power_down(sdev, BIT(core)); 1111 if (ret1 < 0) 1112 dev_err(sdev->dev, "failed to power down core: %d with err: %d\n", core, ret1); 1113 1114 return ret; 1115 } 1116 1117 int hda_dsp_disable_interrupts(struct snd_sof_dev *sdev) 1118 { 1119 hda_sdw_int_enable(sdev, false); 1120 hda_dsp_ipc_int_disable(sdev); 1121 1122 return 0; 1123 } 1124