xref: /openbmc/linux/sound/soc/sof/intel/hda-dsp.c (revision 94d964e5)
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
9 //	    Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
10 //	    Rander Wang <rander.wang@intel.com>
11 //          Keyon Jie <yang.jie@linux.intel.com>
12 //
13 
14 /*
15  * Hardware interface for generic Intel audio DSP HDA IP
16  */
17 
18 #include <linux/module.h>
19 #include <sound/hdaudio_ext.h>
20 #include <sound/hda_register.h>
21 #include "../sof-audio.h"
22 #include "../ops.h"
23 #include "hda.h"
24 #include "hda-ipc.h"
25 
26 static bool hda_enable_trace_D0I3_S0;
27 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG)
28 module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444);
29 MODULE_PARM_DESC(enable_trace_D0I3_S0,
30 		 "SOF HDA enable trace when the DSP is in D0I3 in S0");
31 #endif
32 
33 /*
34  * DSP Core control.
35  */
36 
37 static int hda_dsp_core_reset_enter(struct snd_sof_dev *sdev, unsigned int core_mask)
38 {
39 	u32 adspcs;
40 	u32 reset;
41 	int ret;
42 
43 	/* set reset bits for cores */
44 	reset = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
45 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
46 					 HDA_DSP_REG_ADSPCS,
47 					 reset, reset);
48 
49 	/* poll with timeout to check if operation successful */
50 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
51 					HDA_DSP_REG_ADSPCS, adspcs,
52 					((adspcs & reset) == reset),
53 					HDA_DSP_REG_POLL_INTERVAL_US,
54 					HDA_DSP_RESET_TIMEOUT_US);
55 	if (ret < 0) {
56 		dev_err(sdev->dev,
57 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
58 			__func__);
59 		return ret;
60 	}
61 
62 	/* has core entered reset ? */
63 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
64 				  HDA_DSP_REG_ADSPCS);
65 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) !=
66 		HDA_DSP_ADSPCS_CRST_MASK(core_mask)) {
67 		dev_err(sdev->dev,
68 			"error: reset enter failed: core_mask %x adspcs 0x%x\n",
69 			core_mask, adspcs);
70 		ret = -EIO;
71 	}
72 
73 	return ret;
74 }
75 
76 static int hda_dsp_core_reset_leave(struct snd_sof_dev *sdev, unsigned int core_mask)
77 {
78 	unsigned int crst;
79 	u32 adspcs;
80 	int ret;
81 
82 	/* clear reset bits for cores */
83 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
84 					 HDA_DSP_REG_ADSPCS,
85 					 HDA_DSP_ADSPCS_CRST_MASK(core_mask),
86 					 0);
87 
88 	/* poll with timeout to check if operation successful */
89 	crst = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
90 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
91 					    HDA_DSP_REG_ADSPCS, adspcs,
92 					    !(adspcs & crst),
93 					    HDA_DSP_REG_POLL_INTERVAL_US,
94 					    HDA_DSP_RESET_TIMEOUT_US);
95 
96 	if (ret < 0) {
97 		dev_err(sdev->dev,
98 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
99 			__func__);
100 		return ret;
101 	}
102 
103 	/* has core left reset ? */
104 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
105 				  HDA_DSP_REG_ADSPCS);
106 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 0) {
107 		dev_err(sdev->dev,
108 			"error: reset leave failed: core_mask %x adspcs 0x%x\n",
109 			core_mask, adspcs);
110 		ret = -EIO;
111 	}
112 
113 	return ret;
114 }
115 
116 static int hda_dsp_core_stall_reset(struct snd_sof_dev *sdev, unsigned int core_mask)
117 {
118 	/* stall core */
119 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
120 					 HDA_DSP_REG_ADSPCS,
121 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
122 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
123 
124 	/* set reset state */
125 	return hda_dsp_core_reset_enter(sdev, core_mask);
126 }
127 
128 static bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev, unsigned int core_mask)
129 {
130 	int val;
131 	bool is_enable;
132 
133 	val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS);
134 
135 #define MASK_IS_EQUAL(v, m, field) ({	\
136 	u32 _m = field(m);		\
137 	((v) & _m) == _m;		\
138 })
139 
140 	is_enable = MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_CPA_MASK) &&
141 		MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_SPA_MASK) &&
142 		!(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) &&
143 		!(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
144 
145 #undef MASK_IS_EQUAL
146 
147 	dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n",
148 		is_enable, core_mask);
149 
150 	return is_enable;
151 }
152 
153 int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask)
154 {
155 	int ret;
156 
157 	/* leave reset state */
158 	ret = hda_dsp_core_reset_leave(sdev, core_mask);
159 	if (ret < 0)
160 		return ret;
161 
162 	/* run core */
163 	dev_dbg(sdev->dev, "unstall/run core: core_mask = %x\n", core_mask);
164 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
165 					 HDA_DSP_REG_ADSPCS,
166 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
167 					 0);
168 
169 	/* is core now running ? */
170 	if (!hda_dsp_core_is_enabled(sdev, core_mask)) {
171 		hda_dsp_core_stall_reset(sdev, core_mask);
172 		dev_err(sdev->dev, "error: DSP start core failed: core_mask %x\n",
173 			core_mask);
174 		ret = -EIO;
175 	}
176 
177 	return ret;
178 }
179 
180 /*
181  * Power Management.
182  */
183 
184 static int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask)
185 {
186 	unsigned int cpa;
187 	u32 adspcs;
188 	int ret;
189 
190 	/* update bits */
191 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS,
192 				HDA_DSP_ADSPCS_SPA_MASK(core_mask),
193 				HDA_DSP_ADSPCS_SPA_MASK(core_mask));
194 
195 	/* poll with timeout to check if operation successful */
196 	cpa = HDA_DSP_ADSPCS_CPA_MASK(core_mask);
197 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
198 					    HDA_DSP_REG_ADSPCS, adspcs,
199 					    (adspcs & cpa) == cpa,
200 					    HDA_DSP_REG_POLL_INTERVAL_US,
201 					    HDA_DSP_RESET_TIMEOUT_US);
202 	if (ret < 0) {
203 		dev_err(sdev->dev,
204 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
205 			__func__);
206 		return ret;
207 	}
208 
209 	/* did core power up ? */
210 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
211 				  HDA_DSP_REG_ADSPCS);
212 	if ((adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) !=
213 		HDA_DSP_ADSPCS_CPA_MASK(core_mask)) {
214 		dev_err(sdev->dev,
215 			"error: power up core failed core_mask %xadspcs 0x%x\n",
216 			core_mask, adspcs);
217 		ret = -EIO;
218 	}
219 
220 	return ret;
221 }
222 
223 static int hda_dsp_core_power_down(struct snd_sof_dev *sdev, unsigned int core_mask)
224 {
225 	u32 adspcs;
226 	int ret;
227 
228 	/* update bits */
229 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
230 					 HDA_DSP_REG_ADSPCS,
231 					 HDA_DSP_ADSPCS_SPA_MASK(core_mask), 0);
232 
233 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
234 				HDA_DSP_REG_ADSPCS, adspcs,
235 				!(adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)),
236 				HDA_DSP_REG_POLL_INTERVAL_US,
237 				HDA_DSP_PD_TIMEOUT * USEC_PER_MSEC);
238 	if (ret < 0)
239 		dev_err(sdev->dev,
240 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
241 			__func__);
242 
243 	return ret;
244 }
245 
246 int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask)
247 {
248 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
249 	const struct sof_intel_dsp_desc *chip = hda->desc;
250 	int ret;
251 
252 	/* restrict core_mask to host managed cores mask */
253 	core_mask &= chip->host_managed_cores_mask;
254 
255 	/* return if core_mask is not valid or cores are already enabled */
256 	if (!core_mask || hda_dsp_core_is_enabled(sdev, core_mask))
257 		return 0;
258 
259 	/* power up */
260 	ret = hda_dsp_core_power_up(sdev, core_mask);
261 	if (ret < 0) {
262 		dev_err(sdev->dev, "error: dsp core power up failed: core_mask %x\n",
263 			core_mask);
264 		return ret;
265 	}
266 
267 	return hda_dsp_core_run(sdev, core_mask);
268 }
269 
270 int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev,
271 				  unsigned int core_mask)
272 {
273 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
274 	const struct sof_intel_dsp_desc *chip = hda->desc;
275 	int ret;
276 
277 	/* restrict core_mask to host managed cores mask */
278 	core_mask &= chip->host_managed_cores_mask;
279 
280 	/* return if core_mask is not valid */
281 	if (!core_mask)
282 		return 0;
283 
284 	/* place core in reset prior to power down */
285 	ret = hda_dsp_core_stall_reset(sdev, core_mask);
286 	if (ret < 0) {
287 		dev_err(sdev->dev, "error: dsp core reset failed: core_mask %x\n",
288 			core_mask);
289 		return ret;
290 	}
291 
292 	/* power down core */
293 	ret = hda_dsp_core_power_down(sdev, core_mask);
294 	if (ret < 0) {
295 		dev_err(sdev->dev, "error: dsp core power down fail mask %x: %d\n",
296 			core_mask, ret);
297 		return ret;
298 	}
299 
300 	/* make sure we are in OFF state */
301 	if (hda_dsp_core_is_enabled(sdev, core_mask)) {
302 		dev_err(sdev->dev, "error: dsp core disable fail mask %x: %d\n",
303 			core_mask, ret);
304 		ret = -EIO;
305 	}
306 
307 	return ret;
308 }
309 
310 void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev)
311 {
312 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
313 	const struct sof_intel_dsp_desc *chip = hda->desc;
314 
315 	/* enable IPC DONE and BUSY interrupts */
316 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
317 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY,
318 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY);
319 
320 	/* enable IPC interrupt */
321 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
322 				HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
323 }
324 
325 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev)
326 {
327 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
328 	const struct sof_intel_dsp_desc *chip = hda->desc;
329 
330 	/* disable IPC interrupt */
331 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
332 				HDA_DSP_ADSPIC_IPC, 0);
333 
334 	/* disable IPC BUSY and DONE interrupt */
335 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
336 			HDA_DSP_REG_HIPCCTL_BUSY | HDA_DSP_REG_HIPCCTL_DONE, 0);
337 }
338 
339 static int hda_dsp_wait_d0i3c_done(struct snd_sof_dev *sdev)
340 {
341 	struct hdac_bus *bus = sof_to_bus(sdev);
342 	int retry = HDA_DSP_REG_POLL_RETRY_COUNT;
343 
344 	while (snd_hdac_chip_readb(bus, VS_D0I3C) & SOF_HDA_VS_D0I3C_CIP) {
345 		if (!retry--)
346 			return -ETIMEDOUT;
347 		usleep_range(10, 15);
348 	}
349 
350 	return 0;
351 }
352 
353 static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags)
354 {
355 	struct sof_ipc_pm_gate pm_gate;
356 	struct sof_ipc_reply reply;
357 
358 	memset(&pm_gate, 0, sizeof(pm_gate));
359 
360 	/* configure pm_gate ipc message */
361 	pm_gate.hdr.size = sizeof(pm_gate);
362 	pm_gate.hdr.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_GATE;
363 	pm_gate.flags = flags;
364 
365 	/* send pm_gate ipc to dsp */
366 	return sof_ipc_tx_message_no_pm(sdev->ipc, pm_gate.hdr.cmd,
367 					&pm_gate, sizeof(pm_gate), &reply,
368 					sizeof(reply));
369 }
370 
371 static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value)
372 {
373 	struct hdac_bus *bus = sof_to_bus(sdev);
374 	int ret;
375 
376 	/* Write to D0I3C after Command-In-Progress bit is cleared */
377 	ret = hda_dsp_wait_d0i3c_done(sdev);
378 	if (ret < 0) {
379 		dev_err(bus->dev, "CIP timeout before D0I3C update!\n");
380 		return ret;
381 	}
382 
383 	/* Update D0I3C register */
384 	snd_hdac_chip_updateb(bus, VS_D0I3C, SOF_HDA_VS_D0I3C_I3, value);
385 
386 	/* Wait for cmd in progress to be cleared before exiting the function */
387 	ret = hda_dsp_wait_d0i3c_done(sdev);
388 	if (ret < 0) {
389 		dev_err(bus->dev, "CIP timeout after D0I3C update!\n");
390 		return ret;
391 	}
392 
393 	dev_vdbg(bus->dev, "D0I3C updated, register = 0x%x\n",
394 		 snd_hdac_chip_readb(bus, VS_D0I3C));
395 
396 	return 0;
397 }
398 
399 static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev,
400 				const struct sof_dsp_power_state *target_state)
401 {
402 	u32 flags = 0;
403 	int ret;
404 	u8 value = 0;
405 
406 	/*
407 	 * Sanity check for illegal state transitions
408 	 * The only allowed transitions are:
409 	 * 1. D3 -> D0I0
410 	 * 2. D0I0 -> D0I3
411 	 * 3. D0I3 -> D0I0
412 	 */
413 	switch (sdev->dsp_power_state.state) {
414 	case SOF_DSP_PM_D0:
415 		/* Follow the sequence below for D0 substate transitions */
416 		break;
417 	case SOF_DSP_PM_D3:
418 		/* Follow regular flow for D3 -> D0 transition */
419 		return 0;
420 	default:
421 		dev_err(sdev->dev, "error: transition from %d to %d not allowed\n",
422 			sdev->dsp_power_state.state, target_state->state);
423 		return -EINVAL;
424 	}
425 
426 	/* Set flags and register value for D0 target substate */
427 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3) {
428 		value = SOF_HDA_VS_D0I3C_I3;
429 
430 		/*
431 		 * Trace DMA need to be disabled when the DSP enters
432 		 * D0I3 for S0Ix suspend, but it can be kept enabled
433 		 * when the DSP enters D0I3 while the system is in S0
434 		 * for debug purpose.
435 		 */
436 		if (!sdev->dtrace_is_supported ||
437 		    !hda_enable_trace_D0I3_S0 ||
438 		    sdev->system_suspend_target != SOF_SUSPEND_NONE)
439 			flags = HDA_PM_NO_DMA_TRACE;
440 	} else {
441 		/* prevent power gating in D0I0 */
442 		flags = HDA_PM_PPG;
443 	}
444 
445 	/* update D0I3C register */
446 	ret = hda_dsp_update_d0i3c_register(sdev, value);
447 	if (ret < 0)
448 		return ret;
449 
450 	/*
451 	 * Notify the DSP of the state change.
452 	 * If this IPC fails, revert the D0I3C register update in order
453 	 * to prevent partial state change.
454 	 */
455 	ret = hda_dsp_send_pm_gate_ipc(sdev, flags);
456 	if (ret < 0) {
457 		dev_err(sdev->dev,
458 			"error: PM_GATE ipc error %d\n", ret);
459 		goto revert;
460 	}
461 
462 	return ret;
463 
464 revert:
465 	/* fallback to the previous register value */
466 	value = value ? 0 : SOF_HDA_VS_D0I3C_I3;
467 
468 	/*
469 	 * This can fail but return the IPC error to signal that
470 	 * the state change failed.
471 	 */
472 	hda_dsp_update_d0i3c_register(sdev, value);
473 
474 	return ret;
475 }
476 
477 /* helper to log DSP state */
478 static void hda_dsp_state_log(struct snd_sof_dev *sdev)
479 {
480 	switch (sdev->dsp_power_state.state) {
481 	case SOF_DSP_PM_D0:
482 		switch (sdev->dsp_power_state.substate) {
483 		case SOF_HDA_DSP_PM_D0I0:
484 			dev_dbg(sdev->dev, "Current DSP power state: D0I0\n");
485 			break;
486 		case SOF_HDA_DSP_PM_D0I3:
487 			dev_dbg(sdev->dev, "Current DSP power state: D0I3\n");
488 			break;
489 		default:
490 			dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n",
491 				sdev->dsp_power_state.substate);
492 			break;
493 		}
494 		break;
495 	case SOF_DSP_PM_D1:
496 		dev_dbg(sdev->dev, "Current DSP power state: D1\n");
497 		break;
498 	case SOF_DSP_PM_D2:
499 		dev_dbg(sdev->dev, "Current DSP power state: D2\n");
500 		break;
501 	case SOF_DSP_PM_D3_HOT:
502 		dev_dbg(sdev->dev, "Current DSP power state: D3_HOT\n");
503 		break;
504 	case SOF_DSP_PM_D3:
505 		dev_dbg(sdev->dev, "Current DSP power state: D3\n");
506 		break;
507 	case SOF_DSP_PM_D3_COLD:
508 		dev_dbg(sdev->dev, "Current DSP power state: D3_COLD\n");
509 		break;
510 	default:
511 		dev_dbg(sdev->dev, "Unknown DSP power state: %d\n",
512 			sdev->dsp_power_state.state);
513 		break;
514 	}
515 }
516 
517 /*
518  * All DSP power state transitions are initiated by the driver.
519  * If the requested state change fails, the error is simply returned.
520  * Further state transitions are attempted only when the set_power_save() op
521  * is called again either because of a new IPC sent to the DSP or
522  * during system suspend/resume.
523  */
524 int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
525 			    const struct sof_dsp_power_state *target_state)
526 {
527 	int ret = 0;
528 
529 	/*
530 	 * When the DSP is already in D0I3 and the target state is D0I3,
531 	 * it could be the case that the DSP is in D0I3 during S0
532 	 * and the system is suspending to S0Ix. Therefore,
533 	 * hda_dsp_set_D0_state() must be called to disable trace DMA
534 	 * by sending the PM_GATE IPC to the FW.
535 	 */
536 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3 &&
537 	    sdev->system_suspend_target == SOF_SUSPEND_S0IX)
538 		goto set_state;
539 
540 	/*
541 	 * For all other cases, return without doing anything if
542 	 * the DSP is already in the target state.
543 	 */
544 	if (target_state->state == sdev->dsp_power_state.state &&
545 	    target_state->substate == sdev->dsp_power_state.substate)
546 		return 0;
547 
548 set_state:
549 	switch (target_state->state) {
550 	case SOF_DSP_PM_D0:
551 		ret = hda_dsp_set_D0_state(sdev, target_state);
552 		break;
553 	case SOF_DSP_PM_D3:
554 		/* The only allowed transition is: D0I0 -> D3 */
555 		if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 &&
556 		    sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0)
557 			break;
558 
559 		dev_err(sdev->dev,
560 			"error: transition from %d to %d not allowed\n",
561 			sdev->dsp_power_state.state, target_state->state);
562 		return -EINVAL;
563 	default:
564 		dev_err(sdev->dev, "error: target state unsupported %d\n",
565 			target_state->state);
566 		return -EINVAL;
567 	}
568 	if (ret < 0) {
569 		dev_err(sdev->dev,
570 			"failed to set requested target DSP state %d substate %d\n",
571 			target_state->state, target_state->substate);
572 		return ret;
573 	}
574 
575 	sdev->dsp_power_state = *target_state;
576 	hda_dsp_state_log(sdev);
577 	return ret;
578 }
579 
580 /*
581  * Audio DSP states may transform as below:-
582  *
583  *                                         Opportunistic D0I3 in S0
584  *     Runtime    +---------------------+  Delayed D0i3 work timeout
585  *     suspend    |                     +--------------------+
586  *   +------------+       D0I0(active)  |                    |
587  *   |            |                     <---------------+    |
588  *   |   +-------->                     |    New IPC	|    |
589  *   |   |Runtime +--^--+---------^--+--+ (via mailbox)	|    |
590  *   |   |resume     |  |         |  |			|    |
591  *   |   |           |  |         |  |			|    |
592  *   |   |     System|  |         |  |			|    |
593  *   |   |     resume|  | S3/S0IX |  |                  |    |
594  *   |   |	     |  | suspend |  | S0IX             |    |
595  *   |   |           |  |         |  |suspend           |    |
596  *   |   |           |  |         |  |                  |    |
597  *   |   |           |  |         |  |                  |    |
598  * +-v---+-----------+--v-------+ |  |           +------+----v----+
599  * |                            | |  +----------->                |
600  * |       D3 (suspended)       | |              |      D0I3      |
601  * |                            | +--------------+                |
602  * |                            |  System resume |                |
603  * +----------------------------+		 +----------------+
604  *
605  * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams
606  *		 ignored the suspend trigger. Otherwise the DSP
607  *		 is in D3.
608  */
609 
610 static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
611 {
612 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
613 	const struct sof_intel_dsp_desc *chip = hda->desc;
614 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
615 	struct hdac_bus *bus = sof_to_bus(sdev);
616 #endif
617 	int ret, j;
618 
619 	hda_sdw_int_enable(sdev, false);
620 
621 	/* disable IPC interrupts */
622 	hda_dsp_ipc_int_disable(sdev);
623 
624 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
625 	hda_codec_jack_wake_enable(sdev, runtime_suspend);
626 
627 	/* power down all hda link */
628 	snd_hdac_ext_bus_link_power_down_all(bus);
629 #endif
630 
631 	/* power down DSP */
632 	ret = hda_dsp_core_reset_power_down(sdev, chip->host_managed_cores_mask);
633 	if (ret < 0) {
634 		dev_err(sdev->dev,
635 			"error: failed to power down core during suspend\n");
636 		return ret;
637 	}
638 
639 	/* reset ref counts for all cores */
640 	for (j = 0; j < chip->cores_num; j++)
641 		sdev->dsp_core_ref_count[j] = 0;
642 
643 	/* disable ppcap interrupt */
644 	hda_dsp_ctrl_ppcap_enable(sdev, false);
645 	hda_dsp_ctrl_ppcap_int_enable(sdev, false);
646 
647 	/* disable hda bus irq and streams */
648 	hda_dsp_ctrl_stop_chip(sdev);
649 
650 	/* disable LP retention mode */
651 	snd_sof_pci_update_bits(sdev, PCI_PGCTL,
652 				PCI_PGCTL_LSRMD_MASK, PCI_PGCTL_LSRMD_MASK);
653 
654 	/* reset controller */
655 	ret = hda_dsp_ctrl_link_reset(sdev, true);
656 	if (ret < 0) {
657 		dev_err(sdev->dev,
658 			"error: failed to reset controller during suspend\n");
659 		return ret;
660 	}
661 
662 	/* display codec can powered off after link reset */
663 	hda_codec_i915_display_power(sdev, false);
664 
665 	return 0;
666 }
667 
668 static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume)
669 {
670 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
671 	struct hdac_bus *bus = sof_to_bus(sdev);
672 	struct hdac_ext_link *hlink = NULL;
673 #endif
674 	int ret;
675 
676 	/* display codec must be powered before link reset */
677 	hda_codec_i915_display_power(sdev, true);
678 
679 	/*
680 	 * clear TCSEL to clear playback on some HD Audio
681 	 * codecs. PCI TCSEL is defined in the Intel manuals.
682 	 */
683 	snd_sof_pci_update_bits(sdev, PCI_TCSEL, 0x07, 0);
684 
685 	/* reset and start hda controller */
686 	ret = hda_dsp_ctrl_init_chip(sdev, true);
687 	if (ret < 0) {
688 		dev_err(sdev->dev,
689 			"error: failed to start controller after resume\n");
690 		goto cleanup;
691 	}
692 
693 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
694 	/* check jack status */
695 	if (runtime_resume) {
696 		hda_codec_jack_wake_enable(sdev, false);
697 		if (sdev->system_suspend_target == SOF_SUSPEND_NONE)
698 			hda_codec_jack_check(sdev);
699 	}
700 
701 	/* turn off the links that were off before suspend */
702 	list_for_each_entry(hlink, &bus->hlink_list, list) {
703 		if (!hlink->ref_count)
704 			snd_hdac_ext_bus_link_power_down(hlink);
705 	}
706 
707 	/* check dma status and clean up CORB/RIRB buffers */
708 	if (!bus->cmd_dma_state)
709 		snd_hdac_bus_stop_cmd_io(bus);
710 #endif
711 
712 	/* enable ppcap interrupt */
713 	hda_dsp_ctrl_ppcap_enable(sdev, true);
714 	hda_dsp_ctrl_ppcap_int_enable(sdev, true);
715 
716 cleanup:
717 	/* display codec can powered off after controller init */
718 	hda_codec_i915_display_power(sdev, false);
719 
720 	return 0;
721 }
722 
723 int hda_dsp_resume(struct snd_sof_dev *sdev)
724 {
725 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
726 	struct pci_dev *pci = to_pci_dev(sdev->dev);
727 	const struct sof_dsp_power_state target_state = {
728 		.state = SOF_DSP_PM_D0,
729 		.substate = SOF_HDA_DSP_PM_D0I0,
730 	};
731 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
732 	struct hdac_bus *bus = sof_to_bus(sdev);
733 	struct hdac_ext_link *hlink = NULL;
734 #endif
735 	int ret;
736 
737 	/* resume from D0I3 */
738 	if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) {
739 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
740 		/* power up links that were active before suspend */
741 		list_for_each_entry(hlink, &bus->hlink_list, list) {
742 			if (hlink->ref_count) {
743 				ret = snd_hdac_ext_bus_link_power_up(hlink);
744 				if (ret < 0) {
745 					dev_dbg(sdev->dev,
746 						"error %d in %s: failed to power up links",
747 						ret, __func__);
748 					return ret;
749 				}
750 			}
751 		}
752 
753 		/* set up CORB/RIRB buffers if was on before suspend */
754 		if (bus->cmd_dma_state)
755 			snd_hdac_bus_init_cmd_io(bus);
756 #endif
757 
758 		/* Set DSP power state */
759 		ret = snd_sof_dsp_set_power_state(sdev, &target_state);
760 		if (ret < 0) {
761 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
762 				target_state.state, target_state.substate);
763 			return ret;
764 		}
765 
766 		/* restore L1SEN bit */
767 		if (hda->l1_support_changed)
768 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
769 						HDA_VS_INTEL_EM2,
770 						HDA_VS_INTEL_EM2_L1SEN, 0);
771 
772 		/* restore and disable the system wakeup */
773 		pci_restore_state(pci);
774 		disable_irq_wake(pci->irq);
775 		return 0;
776 	}
777 
778 	/* init hda controller. DSP cores will be powered up during fw boot */
779 	ret = hda_resume(sdev, false);
780 	if (ret < 0)
781 		return ret;
782 
783 	return snd_sof_dsp_set_power_state(sdev, &target_state);
784 }
785 
786 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev)
787 {
788 	const struct sof_dsp_power_state target_state = {
789 		.state = SOF_DSP_PM_D0,
790 	};
791 	int ret;
792 
793 	/* init hda controller. DSP cores will be powered up during fw boot */
794 	ret = hda_resume(sdev, true);
795 	if (ret < 0)
796 		return ret;
797 
798 	return snd_sof_dsp_set_power_state(sdev, &target_state);
799 }
800 
801 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev)
802 {
803 	struct hdac_bus *hbus = sof_to_bus(sdev);
804 
805 	if (hbus->codec_powered) {
806 		dev_dbg(sdev->dev, "some codecs still powered (%08X), not idle\n",
807 			(unsigned int)hbus->codec_powered);
808 		return -EBUSY;
809 	}
810 
811 	return 0;
812 }
813 
814 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev)
815 {
816 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
817 	const struct sof_dsp_power_state target_state = {
818 		.state = SOF_DSP_PM_D3,
819 	};
820 	int ret;
821 
822 	/* cancel any attempt for DSP D0I3 */
823 	cancel_delayed_work_sync(&hda->d0i3_work);
824 
825 	/* stop hda controller and power dsp off */
826 	ret = hda_suspend(sdev, true);
827 	if (ret < 0)
828 		return ret;
829 
830 	return snd_sof_dsp_set_power_state(sdev, &target_state);
831 }
832 
833 int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
834 {
835 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
836 	struct hdac_bus *bus = sof_to_bus(sdev);
837 	struct pci_dev *pci = to_pci_dev(sdev->dev);
838 	const struct sof_dsp_power_state target_dsp_state = {
839 		.state = target_state,
840 		.substate = target_state == SOF_DSP_PM_D0 ?
841 				SOF_HDA_DSP_PM_D0I3 : 0,
842 	};
843 	int ret;
844 
845 	/* cancel any attempt for DSP D0I3 */
846 	cancel_delayed_work_sync(&hda->d0i3_work);
847 
848 	if (target_state == SOF_DSP_PM_D0) {
849 		/* Set DSP power state */
850 		ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
851 		if (ret < 0) {
852 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
853 				target_dsp_state.state,
854 				target_dsp_state.substate);
855 			return ret;
856 		}
857 
858 		/* enable L1SEN to make sure the system can enter S0Ix */
859 		hda->l1_support_changed =
860 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
861 						HDA_VS_INTEL_EM2,
862 						HDA_VS_INTEL_EM2_L1SEN,
863 						HDA_VS_INTEL_EM2_L1SEN);
864 
865 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
866 		/* stop the CORB/RIRB DMA if it is On */
867 		if (bus->cmd_dma_state)
868 			snd_hdac_bus_stop_cmd_io(bus);
869 
870 		/* no link can be powered in s0ix state */
871 		ret = snd_hdac_ext_bus_link_power_down_all(bus);
872 		if (ret < 0) {
873 			dev_dbg(sdev->dev,
874 				"error %d in %s: failed to power down links",
875 				ret, __func__);
876 			return ret;
877 		}
878 #endif
879 
880 		/* enable the system waking up via IPC IRQ */
881 		enable_irq_wake(pci->irq);
882 		pci_save_state(pci);
883 		return 0;
884 	}
885 
886 	/* stop hda controller and power dsp off */
887 	ret = hda_suspend(sdev, false);
888 	if (ret < 0) {
889 		dev_err(bus->dev, "error: suspending dsp\n");
890 		return ret;
891 	}
892 
893 	return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
894 }
895 
896 int hda_dsp_shutdown(struct snd_sof_dev *sdev)
897 {
898 	sdev->system_suspend_target = SOF_SUSPEND_S3;
899 	return snd_sof_suspend(sdev->dev);
900 }
901 
902 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
903 {
904 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
905 	struct hdac_bus *bus = sof_to_bus(sdev);
906 	struct snd_soc_pcm_runtime *rtd;
907 	struct hdac_ext_stream *stream;
908 	struct hdac_ext_link *link;
909 	struct hdac_stream *s;
910 	const char *name;
911 	int stream_tag;
912 
913 	/* set internal flag for BE */
914 	list_for_each_entry(s, &bus->stream_list, list) {
915 		stream = stream_to_hdac_ext_stream(s);
916 
917 		/*
918 		 * clear stream. This should already be taken care for running
919 		 * streams when the SUSPEND trigger is called. But paused
920 		 * streams do not get suspended, so this needs to be done
921 		 * explicitly during suspend.
922 		 */
923 		if (stream->link_substream) {
924 			rtd = asoc_substream_to_rtd(stream->link_substream);
925 			name = asoc_rtd_to_codec(rtd, 0)->component->name;
926 			link = snd_hdac_ext_bus_get_link(bus, name);
927 			if (!link)
928 				return -EINVAL;
929 
930 			stream->link_prepared = 0;
931 
932 			if (hdac_stream(stream)->direction ==
933 				SNDRV_PCM_STREAM_CAPTURE)
934 				continue;
935 
936 			stream_tag = hdac_stream(stream)->stream_tag;
937 			snd_hdac_ext_link_clear_stream_id(link, stream_tag);
938 		}
939 	}
940 #endif
941 	return 0;
942 }
943 
944 void hda_dsp_d0i3_work(struct work_struct *work)
945 {
946 	struct sof_intel_hda_dev *hdev = container_of(work,
947 						      struct sof_intel_hda_dev,
948 						      d0i3_work.work);
949 	struct hdac_bus *bus = &hdev->hbus.core;
950 	struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev);
951 	struct sof_dsp_power_state target_state = {
952 		.state = SOF_DSP_PM_D0,
953 		.substate = SOF_HDA_DSP_PM_D0I3,
954 	};
955 	int ret;
956 
957 	/* DSP can enter D0I3 iff only D0I3-compatible streams are active */
958 	if (!snd_sof_dsp_only_d0i3_compatible_stream_active(sdev))
959 		/* remain in D0I0 */
960 		return;
961 
962 	/* This can fail but error cannot be propagated */
963 	ret = snd_sof_dsp_set_power_state(sdev, &target_state);
964 	if (ret < 0)
965 		dev_err_ratelimited(sdev->dev,
966 				    "error: failed to set DSP state %d substate %d\n",
967 				    target_state.state, target_state.substate);
968 }
969 
970 int hda_dsp_core_get(struct snd_sof_dev *sdev, int core)
971 {
972 	struct sof_ipc_pm_core_config pm_core_config = {
973 		.hdr = {
974 			.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CORE_ENABLE,
975 			.size = sizeof(pm_core_config),
976 		},
977 		.enable_mask = sdev->enabled_cores_mask | BIT(core),
978 	};
979 	int ret, ret1;
980 
981 	/* power up core */
982 	ret = hda_dsp_enable_core(sdev, BIT(core));
983 	if (ret < 0) {
984 		dev_err(sdev->dev, "failed to power up core %d with err: %d\n",
985 			core, ret);
986 		return ret;
987 	}
988 
989 	/* No need to send IPC for primary core or if FW boot is not complete */
990 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE || core == SOF_DSP_PRIMARY_CORE)
991 		return 0;
992 
993 	/* Now notify DSP for secondary cores */
994 	ret = sof_ipc_tx_message(sdev->ipc, pm_core_config.hdr.cmd,
995 				 &pm_core_config, sizeof(pm_core_config),
996 				 &pm_core_config, sizeof(pm_core_config));
997 	if (ret < 0) {
998 		dev_err(sdev->dev, "failed to enable secondary core '%d' failed with %d\n",
999 			core, ret);
1000 		goto power_down;
1001 	}
1002 
1003 	return ret;
1004 
1005 power_down:
1006 	/* power down core if it is host managed and return the original error if this fails too */
1007 	ret1 = hda_dsp_core_reset_power_down(sdev, BIT(core));
1008 	if (ret1 < 0)
1009 		dev_err(sdev->dev, "failed to power down core: %d with err: %d\n", core, ret1);
1010 
1011 	return ret;
1012 }
1013