xref: /openbmc/linux/sound/soc/sof/intel/hda-dsp.c (revision 234489ac)
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
9 //	    Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
10 //	    Rander Wang <rander.wang@intel.com>
11 //          Keyon Jie <yang.jie@linux.intel.com>
12 //
13 
14 /*
15  * Hardware interface for generic Intel audio DSP HDA IP
16  */
17 
18 #include <linux/module.h>
19 #include <sound/hdaudio_ext.h>
20 #include <sound/hda_register.h>
21 #include <sound/hda-mlink.h>
22 #include <trace/events/sof_intel.h>
23 #include "../sof-audio.h"
24 #include "../ops.h"
25 #include "hda.h"
26 #include "hda-ipc.h"
27 
28 static bool hda_enable_trace_D0I3_S0;
29 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG)
30 module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444);
31 MODULE_PARM_DESC(enable_trace_D0I3_S0,
32 		 "SOF HDA enable trace when the DSP is in D0I3 in S0");
33 #endif
34 
35 /*
36  * DSP Core control.
37  */
38 
39 static int hda_dsp_core_reset_enter(struct snd_sof_dev *sdev, unsigned int core_mask)
40 {
41 	u32 adspcs;
42 	u32 reset;
43 	int ret;
44 
45 	/* set reset bits for cores */
46 	reset = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
47 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
48 					 HDA_DSP_REG_ADSPCS,
49 					 reset, reset);
50 
51 	/* poll with timeout to check if operation successful */
52 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
53 					HDA_DSP_REG_ADSPCS, adspcs,
54 					((adspcs & reset) == reset),
55 					HDA_DSP_REG_POLL_INTERVAL_US,
56 					HDA_DSP_RESET_TIMEOUT_US);
57 	if (ret < 0) {
58 		dev_err(sdev->dev,
59 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
60 			__func__);
61 		return ret;
62 	}
63 
64 	/* has core entered reset ? */
65 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
66 				  HDA_DSP_REG_ADSPCS);
67 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) !=
68 		HDA_DSP_ADSPCS_CRST_MASK(core_mask)) {
69 		dev_err(sdev->dev,
70 			"error: reset enter failed: core_mask %x adspcs 0x%x\n",
71 			core_mask, adspcs);
72 		ret = -EIO;
73 	}
74 
75 	return ret;
76 }
77 
78 static int hda_dsp_core_reset_leave(struct snd_sof_dev *sdev, unsigned int core_mask)
79 {
80 	unsigned int crst;
81 	u32 adspcs;
82 	int ret;
83 
84 	/* clear reset bits for cores */
85 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
86 					 HDA_DSP_REG_ADSPCS,
87 					 HDA_DSP_ADSPCS_CRST_MASK(core_mask),
88 					 0);
89 
90 	/* poll with timeout to check if operation successful */
91 	crst = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
92 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
93 					    HDA_DSP_REG_ADSPCS, adspcs,
94 					    !(adspcs & crst),
95 					    HDA_DSP_REG_POLL_INTERVAL_US,
96 					    HDA_DSP_RESET_TIMEOUT_US);
97 
98 	if (ret < 0) {
99 		dev_err(sdev->dev,
100 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
101 			__func__);
102 		return ret;
103 	}
104 
105 	/* has core left reset ? */
106 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
107 				  HDA_DSP_REG_ADSPCS);
108 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 0) {
109 		dev_err(sdev->dev,
110 			"error: reset leave failed: core_mask %x adspcs 0x%x\n",
111 			core_mask, adspcs);
112 		ret = -EIO;
113 	}
114 
115 	return ret;
116 }
117 
118 int hda_dsp_core_stall_reset(struct snd_sof_dev *sdev, unsigned int core_mask)
119 {
120 	/* stall core */
121 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
122 					 HDA_DSP_REG_ADSPCS,
123 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
124 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
125 
126 	/* set reset state */
127 	return hda_dsp_core_reset_enter(sdev, core_mask);
128 }
129 
130 bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev, unsigned int core_mask)
131 {
132 	int val;
133 	bool is_enable;
134 
135 	val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS);
136 
137 #define MASK_IS_EQUAL(v, m, field) ({	\
138 	u32 _m = field(m);		\
139 	((v) & _m) == _m;		\
140 })
141 
142 	is_enable = MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_CPA_MASK) &&
143 		MASK_IS_EQUAL(val, core_mask, HDA_DSP_ADSPCS_SPA_MASK) &&
144 		!(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) &&
145 		!(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
146 
147 #undef MASK_IS_EQUAL
148 
149 	dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n",
150 		is_enable, core_mask);
151 
152 	return is_enable;
153 }
154 
155 int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask)
156 {
157 	int ret;
158 
159 	/* leave reset state */
160 	ret = hda_dsp_core_reset_leave(sdev, core_mask);
161 	if (ret < 0)
162 		return ret;
163 
164 	/* run core */
165 	dev_dbg(sdev->dev, "unstall/run core: core_mask = %x\n", core_mask);
166 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
167 					 HDA_DSP_REG_ADSPCS,
168 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
169 					 0);
170 
171 	/* is core now running ? */
172 	if (!hda_dsp_core_is_enabled(sdev, core_mask)) {
173 		hda_dsp_core_stall_reset(sdev, core_mask);
174 		dev_err(sdev->dev, "error: DSP start core failed: core_mask %x\n",
175 			core_mask);
176 		ret = -EIO;
177 	}
178 
179 	return ret;
180 }
181 
182 /*
183  * Power Management.
184  */
185 
186 int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask)
187 {
188 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
189 	const struct sof_intel_dsp_desc *chip = hda->desc;
190 	unsigned int cpa;
191 	u32 adspcs;
192 	int ret;
193 
194 	/* restrict core_mask to host managed cores mask */
195 	core_mask &= chip->host_managed_cores_mask;
196 	/* return if core_mask is not valid */
197 	if (!core_mask)
198 		return 0;
199 
200 	/* update bits */
201 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS,
202 				HDA_DSP_ADSPCS_SPA_MASK(core_mask),
203 				HDA_DSP_ADSPCS_SPA_MASK(core_mask));
204 
205 	/* poll with timeout to check if operation successful */
206 	cpa = HDA_DSP_ADSPCS_CPA_MASK(core_mask);
207 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
208 					    HDA_DSP_REG_ADSPCS, adspcs,
209 					    (adspcs & cpa) == cpa,
210 					    HDA_DSP_REG_POLL_INTERVAL_US,
211 					    HDA_DSP_RESET_TIMEOUT_US);
212 	if (ret < 0) {
213 		dev_err(sdev->dev,
214 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
215 			__func__);
216 		return ret;
217 	}
218 
219 	/* did core power up ? */
220 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
221 				  HDA_DSP_REG_ADSPCS);
222 	if ((adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) !=
223 		HDA_DSP_ADSPCS_CPA_MASK(core_mask)) {
224 		dev_err(sdev->dev,
225 			"error: power up core failed core_mask %xadspcs 0x%x\n",
226 			core_mask, adspcs);
227 		ret = -EIO;
228 	}
229 
230 	return ret;
231 }
232 
233 static int hda_dsp_core_power_down(struct snd_sof_dev *sdev, unsigned int core_mask)
234 {
235 	u32 adspcs;
236 	int ret;
237 
238 	/* update bits */
239 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
240 					 HDA_DSP_REG_ADSPCS,
241 					 HDA_DSP_ADSPCS_SPA_MASK(core_mask), 0);
242 
243 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
244 				HDA_DSP_REG_ADSPCS, adspcs,
245 				!(adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)),
246 				HDA_DSP_REG_POLL_INTERVAL_US,
247 				HDA_DSP_PD_TIMEOUT * USEC_PER_MSEC);
248 	if (ret < 0)
249 		dev_err(sdev->dev,
250 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
251 			__func__);
252 
253 	return ret;
254 }
255 
256 int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask)
257 {
258 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
259 	const struct sof_intel_dsp_desc *chip = hda->desc;
260 	int ret;
261 
262 	/* restrict core_mask to host managed cores mask */
263 	core_mask &= chip->host_managed_cores_mask;
264 
265 	/* return if core_mask is not valid or cores are already enabled */
266 	if (!core_mask || hda_dsp_core_is_enabled(sdev, core_mask))
267 		return 0;
268 
269 	/* power up */
270 	ret = hda_dsp_core_power_up(sdev, core_mask);
271 	if (ret < 0) {
272 		dev_err(sdev->dev, "error: dsp core power up failed: core_mask %x\n",
273 			core_mask);
274 		return ret;
275 	}
276 
277 	return hda_dsp_core_run(sdev, core_mask);
278 }
279 
280 int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev,
281 				  unsigned int core_mask)
282 {
283 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
284 	const struct sof_intel_dsp_desc *chip = hda->desc;
285 	int ret;
286 
287 	/* restrict core_mask to host managed cores mask */
288 	core_mask &= chip->host_managed_cores_mask;
289 
290 	/* return if core_mask is not valid */
291 	if (!core_mask)
292 		return 0;
293 
294 	/* place core in reset prior to power down */
295 	ret = hda_dsp_core_stall_reset(sdev, core_mask);
296 	if (ret < 0) {
297 		dev_err(sdev->dev, "error: dsp core reset failed: core_mask %x\n",
298 			core_mask);
299 		return ret;
300 	}
301 
302 	/* power down core */
303 	ret = hda_dsp_core_power_down(sdev, core_mask);
304 	if (ret < 0) {
305 		dev_err(sdev->dev, "error: dsp core power down fail mask %x: %d\n",
306 			core_mask, ret);
307 		return ret;
308 	}
309 
310 	/* make sure we are in OFF state */
311 	if (hda_dsp_core_is_enabled(sdev, core_mask)) {
312 		dev_err(sdev->dev, "error: dsp core disable fail mask %x: %d\n",
313 			core_mask, ret);
314 		ret = -EIO;
315 	}
316 
317 	return ret;
318 }
319 
320 void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev)
321 {
322 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
323 	const struct sof_intel_dsp_desc *chip = hda->desc;
324 
325 	if (sdev->dspless_mode_selected)
326 		return;
327 
328 	/* enable IPC DONE and BUSY interrupts */
329 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
330 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY,
331 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY);
332 
333 	/* enable IPC interrupt */
334 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
335 				HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
336 }
337 
338 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev)
339 {
340 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
341 	const struct sof_intel_dsp_desc *chip = hda->desc;
342 
343 	if (sdev->dspless_mode_selected)
344 		return;
345 
346 	/* disable IPC interrupt */
347 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
348 				HDA_DSP_ADSPIC_IPC, 0);
349 
350 	/* disable IPC BUSY and DONE interrupt */
351 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
352 			HDA_DSP_REG_HIPCCTL_BUSY | HDA_DSP_REG_HIPCCTL_DONE, 0);
353 }
354 
355 static int hda_dsp_wait_d0i3c_done(struct snd_sof_dev *sdev)
356 {
357 	int retry = HDA_DSP_REG_POLL_RETRY_COUNT;
358 	struct snd_sof_pdata *pdata = sdev->pdata;
359 	const struct sof_intel_dsp_desc *chip;
360 
361 	chip = get_chip_info(pdata);
362 	while (snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset) &
363 		SOF_HDA_VS_D0I3C_CIP) {
364 		if (!retry--)
365 			return -ETIMEDOUT;
366 		usleep_range(10, 15);
367 	}
368 
369 	return 0;
370 }
371 
372 static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags)
373 {
374 	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
375 
376 	if (pm_ops && pm_ops->set_pm_gate)
377 		return pm_ops->set_pm_gate(sdev, flags);
378 
379 	return 0;
380 }
381 
382 static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value)
383 {
384 	struct snd_sof_pdata *pdata = sdev->pdata;
385 	const struct sof_intel_dsp_desc *chip;
386 	int ret;
387 	u8 reg;
388 
389 	chip = get_chip_info(pdata);
390 
391 	/* Write to D0I3C after Command-In-Progress bit is cleared */
392 	ret = hda_dsp_wait_d0i3c_done(sdev);
393 	if (ret < 0) {
394 		dev_err(sdev->dev, "CIP timeout before D0I3C update!\n");
395 		return ret;
396 	}
397 
398 	/* Update D0I3C register */
399 	snd_sof_dsp_update8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset,
400 			    SOF_HDA_VS_D0I3C_I3, value);
401 
402 	/*
403 	 * The value written to the D0I3C::I3 bit may not be taken into account immediately.
404 	 * A delay is recommended before checking if D0I3C::CIP is cleared
405 	 */
406 	usleep_range(30, 40);
407 
408 	/* Wait for cmd in progress to be cleared before exiting the function */
409 	ret = hda_dsp_wait_d0i3c_done(sdev);
410 	if (ret < 0) {
411 		dev_err(sdev->dev, "CIP timeout after D0I3C update!\n");
412 		return ret;
413 	}
414 
415 	reg = snd_sof_dsp_read8(sdev, HDA_DSP_HDA_BAR, chip->d0i3_offset);
416 	/* Confirm d0i3 state changed with paranoia check */
417 	if ((reg ^ value) & SOF_HDA_VS_D0I3C_I3) {
418 		dev_err(sdev->dev, "failed to update D0I3C!\n");
419 		return -EIO;
420 	}
421 
422 	trace_sof_intel_D0I3C_updated(sdev, reg);
423 
424 	return 0;
425 }
426 
427 /*
428  * d0i3 streaming is enabled if all the active streams can
429  * work in d0i3 state and playback is enabled
430  */
431 static bool hda_dsp_d0i3_streaming_applicable(struct snd_sof_dev *sdev)
432 {
433 	struct snd_pcm_substream *substream;
434 	struct snd_sof_pcm *spcm;
435 	bool playback_active = false;
436 	int dir;
437 
438 	list_for_each_entry(spcm, &sdev->pcm_list, list) {
439 		for_each_pcm_streams(dir) {
440 			substream = spcm->stream[dir].substream;
441 			if (!substream || !substream->runtime)
442 				continue;
443 
444 			if (!spcm->stream[dir].d0i3_compatible)
445 				return false;
446 
447 			if (dir == SNDRV_PCM_STREAM_PLAYBACK)
448 				playback_active = true;
449 		}
450 	}
451 
452 	return playback_active;
453 }
454 
455 static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev,
456 				const struct sof_dsp_power_state *target_state)
457 {
458 	u32 flags = 0;
459 	int ret;
460 	u8 value = 0;
461 
462 	/*
463 	 * Sanity check for illegal state transitions
464 	 * The only allowed transitions are:
465 	 * 1. D3 -> D0I0
466 	 * 2. D0I0 -> D0I3
467 	 * 3. D0I3 -> D0I0
468 	 */
469 	switch (sdev->dsp_power_state.state) {
470 	case SOF_DSP_PM_D0:
471 		/* Follow the sequence below for D0 substate transitions */
472 		break;
473 	case SOF_DSP_PM_D3:
474 		/* Follow regular flow for D3 -> D0 transition */
475 		return 0;
476 	default:
477 		dev_err(sdev->dev, "error: transition from %d to %d not allowed\n",
478 			sdev->dsp_power_state.state, target_state->state);
479 		return -EINVAL;
480 	}
481 
482 	/* Set flags and register value for D0 target substate */
483 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3) {
484 		value = SOF_HDA_VS_D0I3C_I3;
485 
486 		/*
487 		 * Trace DMA need to be disabled when the DSP enters
488 		 * D0I3 for S0Ix suspend, but it can be kept enabled
489 		 * when the DSP enters D0I3 while the system is in S0
490 		 * for debug purpose.
491 		 */
492 		if (!sdev->fw_trace_is_supported ||
493 		    !hda_enable_trace_D0I3_S0 ||
494 		    sdev->system_suspend_target != SOF_SUSPEND_NONE)
495 			flags = HDA_PM_NO_DMA_TRACE;
496 
497 		if (hda_dsp_d0i3_streaming_applicable(sdev))
498 			flags |= HDA_PM_PG_STREAMING;
499 	} else {
500 		/* prevent power gating in D0I0 */
501 		flags = HDA_PM_PPG;
502 	}
503 
504 	/* update D0I3C register */
505 	ret = hda_dsp_update_d0i3c_register(sdev, value);
506 	if (ret < 0)
507 		return ret;
508 
509 	/*
510 	 * Notify the DSP of the state change.
511 	 * If this IPC fails, revert the D0I3C register update in order
512 	 * to prevent partial state change.
513 	 */
514 	ret = hda_dsp_send_pm_gate_ipc(sdev, flags);
515 	if (ret < 0) {
516 		dev_err(sdev->dev,
517 			"error: PM_GATE ipc error %d\n", ret);
518 		goto revert;
519 	}
520 
521 	return ret;
522 
523 revert:
524 	/* fallback to the previous register value */
525 	value = value ? 0 : SOF_HDA_VS_D0I3C_I3;
526 
527 	/*
528 	 * This can fail but return the IPC error to signal that
529 	 * the state change failed.
530 	 */
531 	hda_dsp_update_d0i3c_register(sdev, value);
532 
533 	return ret;
534 }
535 
536 /* helper to log DSP state */
537 static void hda_dsp_state_log(struct snd_sof_dev *sdev)
538 {
539 	switch (sdev->dsp_power_state.state) {
540 	case SOF_DSP_PM_D0:
541 		switch (sdev->dsp_power_state.substate) {
542 		case SOF_HDA_DSP_PM_D0I0:
543 			dev_dbg(sdev->dev, "Current DSP power state: D0I0\n");
544 			break;
545 		case SOF_HDA_DSP_PM_D0I3:
546 			dev_dbg(sdev->dev, "Current DSP power state: D0I3\n");
547 			break;
548 		default:
549 			dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n",
550 				sdev->dsp_power_state.substate);
551 			break;
552 		}
553 		break;
554 	case SOF_DSP_PM_D1:
555 		dev_dbg(sdev->dev, "Current DSP power state: D1\n");
556 		break;
557 	case SOF_DSP_PM_D2:
558 		dev_dbg(sdev->dev, "Current DSP power state: D2\n");
559 		break;
560 	case SOF_DSP_PM_D3:
561 		dev_dbg(sdev->dev, "Current DSP power state: D3\n");
562 		break;
563 	default:
564 		dev_dbg(sdev->dev, "Unknown DSP power state: %d\n",
565 			sdev->dsp_power_state.state);
566 		break;
567 	}
568 }
569 
570 /*
571  * All DSP power state transitions are initiated by the driver.
572  * If the requested state change fails, the error is simply returned.
573  * Further state transitions are attempted only when the set_power_save() op
574  * is called again either because of a new IPC sent to the DSP or
575  * during system suspend/resume.
576  */
577 static int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
578 				   const struct sof_dsp_power_state *target_state)
579 {
580 	int ret = 0;
581 
582 	switch (target_state->state) {
583 	case SOF_DSP_PM_D0:
584 		ret = hda_dsp_set_D0_state(sdev, target_state);
585 		break;
586 	case SOF_DSP_PM_D3:
587 		/* The only allowed transition is: D0I0 -> D3 */
588 		if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 &&
589 		    sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0)
590 			break;
591 
592 		dev_err(sdev->dev,
593 			"error: transition from %d to %d not allowed\n",
594 			sdev->dsp_power_state.state, target_state->state);
595 		return -EINVAL;
596 	default:
597 		dev_err(sdev->dev, "error: target state unsupported %d\n",
598 			target_state->state);
599 		return -EINVAL;
600 	}
601 	if (ret < 0) {
602 		dev_err(sdev->dev,
603 			"failed to set requested target DSP state %d substate %d\n",
604 			target_state->state, target_state->substate);
605 		return ret;
606 	}
607 
608 	sdev->dsp_power_state = *target_state;
609 	hda_dsp_state_log(sdev);
610 	return ret;
611 }
612 
613 int hda_dsp_set_power_state_ipc3(struct snd_sof_dev *sdev,
614 				 const struct sof_dsp_power_state *target_state)
615 {
616 	/*
617 	 * When the DSP is already in D0I3 and the target state is D0I3,
618 	 * it could be the case that the DSP is in D0I3 during S0
619 	 * and the system is suspending to S0Ix. Therefore,
620 	 * hda_dsp_set_D0_state() must be called to disable trace DMA
621 	 * by sending the PM_GATE IPC to the FW.
622 	 */
623 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3 &&
624 	    sdev->system_suspend_target == SOF_SUSPEND_S0IX)
625 		return hda_dsp_set_power_state(sdev, target_state);
626 
627 	/*
628 	 * For all other cases, return without doing anything if
629 	 * the DSP is already in the target state.
630 	 */
631 	if (target_state->state == sdev->dsp_power_state.state &&
632 	    target_state->substate == sdev->dsp_power_state.substate)
633 		return 0;
634 
635 	return hda_dsp_set_power_state(sdev, target_state);
636 }
637 
638 int hda_dsp_set_power_state_ipc4(struct snd_sof_dev *sdev,
639 				 const struct sof_dsp_power_state *target_state)
640 {
641 	/* Return without doing anything if the DSP is already in the target state */
642 	if (target_state->state == sdev->dsp_power_state.state &&
643 	    target_state->substate == sdev->dsp_power_state.substate)
644 		return 0;
645 
646 	return hda_dsp_set_power_state(sdev, target_state);
647 }
648 
649 /*
650  * Audio DSP states may transform as below:-
651  *
652  *                                         Opportunistic D0I3 in S0
653  *     Runtime    +---------------------+  Delayed D0i3 work timeout
654  *     suspend    |                     +--------------------+
655  *   +------------+       D0I0(active)  |                    |
656  *   |            |                     <---------------+    |
657  *   |   +-------->                     |    New IPC	|    |
658  *   |   |Runtime +--^--+---------^--+--+ (via mailbox)	|    |
659  *   |   |resume     |  |         |  |			|    |
660  *   |   |           |  |         |  |			|    |
661  *   |   |     System|  |         |  |			|    |
662  *   |   |     resume|  | S3/S0IX |  |                  |    |
663  *   |   |	     |  | suspend |  | S0IX             |    |
664  *   |   |           |  |         |  |suspend           |    |
665  *   |   |           |  |         |  |                  |    |
666  *   |   |           |  |         |  |                  |    |
667  * +-v---+-----------+--v-------+ |  |           +------+----v----+
668  * |                            | |  +----------->                |
669  * |       D3 (suspended)       | |              |      D0I3      |
670  * |                            | +--------------+                |
671  * |                            |  System resume |                |
672  * +----------------------------+		 +----------------+
673  *
674  * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams
675  *		 ignored the suspend trigger. Otherwise the DSP
676  *		 is in D3.
677  */
678 
679 static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
680 {
681 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
682 	const struct sof_intel_dsp_desc *chip = hda->desc;
683 	struct hdac_bus *bus = sof_to_bus(sdev);
684 	int ret, j;
685 
686 	/*
687 	 * The memory used for IMR boot loses its content in deeper than S3 state
688 	 * We must not try IMR boot on next power up (as it will fail).
689 	 *
690 	 * In case of firmware crash or boot failure set the skip_imr_boot to true
691 	 * as well in order to try to re-load the firmware to do a 'cold' boot.
692 	 */
693 	if (sdev->system_suspend_target > SOF_SUSPEND_S3 ||
694 	    sdev->fw_state == SOF_FW_CRASHED ||
695 	    sdev->fw_state == SOF_FW_BOOT_FAILED)
696 		hda->skip_imr_boot = true;
697 
698 	ret = chip->disable_interrupts(sdev);
699 	if (ret < 0)
700 		return ret;
701 
702 	hda_codec_jack_wake_enable(sdev, runtime_suspend);
703 
704 	/* power down all hda links */
705 	hda_bus_ml_suspend(bus);
706 
707 	if (sdev->dspless_mode_selected)
708 		goto skip_dsp;
709 
710 	ret = chip->power_down_dsp(sdev);
711 	if (ret < 0) {
712 		dev_err(sdev->dev, "failed to power down DSP during suspend\n");
713 		return ret;
714 	}
715 
716 	/* reset ref counts for all cores */
717 	for (j = 0; j < chip->cores_num; j++)
718 		sdev->dsp_core_ref_count[j] = 0;
719 
720 	/* disable ppcap interrupt */
721 	hda_dsp_ctrl_ppcap_enable(sdev, false);
722 	hda_dsp_ctrl_ppcap_int_enable(sdev, false);
723 skip_dsp:
724 
725 	/* disable hda bus irq and streams */
726 	hda_dsp_ctrl_stop_chip(sdev);
727 
728 	/* disable LP retention mode */
729 	snd_sof_pci_update_bits(sdev, PCI_PGCTL,
730 				PCI_PGCTL_LSRMD_MASK, PCI_PGCTL_LSRMD_MASK);
731 
732 	/* reset controller */
733 	ret = hda_dsp_ctrl_link_reset(sdev, true);
734 	if (ret < 0) {
735 		dev_err(sdev->dev,
736 			"error: failed to reset controller during suspend\n");
737 		return ret;
738 	}
739 
740 	/* display codec can powered off after link reset */
741 	hda_codec_i915_display_power(sdev, false);
742 
743 	return 0;
744 }
745 
746 static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume)
747 {
748 	int ret;
749 
750 	/* display codec must be powered before link reset */
751 	hda_codec_i915_display_power(sdev, true);
752 
753 	/*
754 	 * clear TCSEL to clear playback on some HD Audio
755 	 * codecs. PCI TCSEL is defined in the Intel manuals.
756 	 */
757 	snd_sof_pci_update_bits(sdev, PCI_TCSEL, 0x07, 0);
758 
759 	/* reset and start hda controller */
760 	ret = hda_dsp_ctrl_init_chip(sdev);
761 	if (ret < 0) {
762 		dev_err(sdev->dev,
763 			"error: failed to start controller after resume\n");
764 		goto cleanup;
765 	}
766 
767 	/* check jack status */
768 	if (runtime_resume) {
769 		hda_codec_jack_wake_enable(sdev, false);
770 		if (sdev->system_suspend_target == SOF_SUSPEND_NONE)
771 			hda_codec_jack_check(sdev);
772 	}
773 
774 	if (!sdev->dspless_mode_selected) {
775 		/* enable ppcap interrupt */
776 		hda_dsp_ctrl_ppcap_enable(sdev, true);
777 		hda_dsp_ctrl_ppcap_int_enable(sdev, true);
778 	}
779 
780 cleanup:
781 	/* display codec can powered off after controller init */
782 	hda_codec_i915_display_power(sdev, false);
783 
784 	return 0;
785 }
786 
787 int hda_dsp_resume(struct snd_sof_dev *sdev)
788 {
789 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
790 	struct hdac_bus *bus = sof_to_bus(sdev);
791 	struct pci_dev *pci = to_pci_dev(sdev->dev);
792 	const struct sof_dsp_power_state target_state = {
793 		.state = SOF_DSP_PM_D0,
794 		.substate = SOF_HDA_DSP_PM_D0I0,
795 	};
796 	int ret;
797 
798 	/* resume from D0I3 */
799 	if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) {
800 		ret = hda_bus_ml_resume(bus);
801 		if (ret < 0) {
802 			dev_err(sdev->dev,
803 				"error %d in %s: failed to power up links",
804 				ret, __func__);
805 			return ret;
806 		}
807 
808 		/* set up CORB/RIRB buffers if was on before suspend */
809 		hda_codec_resume_cmd_io(sdev);
810 
811 		/* Set DSP power state */
812 		ret = snd_sof_dsp_set_power_state(sdev, &target_state);
813 		if (ret < 0) {
814 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
815 				target_state.state, target_state.substate);
816 			return ret;
817 		}
818 
819 		/* restore L1SEN bit */
820 		if (hda->l1_disabled)
821 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
822 						HDA_VS_INTEL_EM2,
823 						HDA_VS_INTEL_EM2_L1SEN, 0);
824 
825 		/* restore and disable the system wakeup */
826 		pci_restore_state(pci);
827 		disable_irq_wake(pci->irq);
828 		return 0;
829 	}
830 
831 	/* init hda controller. DSP cores will be powered up during fw boot */
832 	ret = hda_resume(sdev, false);
833 	if (ret < 0)
834 		return ret;
835 
836 	return snd_sof_dsp_set_power_state(sdev, &target_state);
837 }
838 
839 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev)
840 {
841 	const struct sof_dsp_power_state target_state = {
842 		.state = SOF_DSP_PM_D0,
843 	};
844 	int ret;
845 
846 	/* init hda controller. DSP cores will be powered up during fw boot */
847 	ret = hda_resume(sdev, true);
848 	if (ret < 0)
849 		return ret;
850 
851 	return snd_sof_dsp_set_power_state(sdev, &target_state);
852 }
853 
854 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev)
855 {
856 	struct hdac_bus *hbus = sof_to_bus(sdev);
857 
858 	if (hbus->codec_powered) {
859 		dev_dbg(sdev->dev, "some codecs still powered (%08X), not idle\n",
860 			(unsigned int)hbus->codec_powered);
861 		return -EBUSY;
862 	}
863 
864 	return 0;
865 }
866 
867 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev)
868 {
869 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
870 	const struct sof_dsp_power_state target_state = {
871 		.state = SOF_DSP_PM_D3,
872 	};
873 	int ret;
874 
875 	if (!sdev->dspless_mode_selected) {
876 		/* cancel any attempt for DSP D0I3 */
877 		cancel_delayed_work_sync(&hda->d0i3_work);
878 	}
879 
880 	/* stop hda controller and power dsp off */
881 	ret = hda_suspend(sdev, true);
882 	if (ret < 0)
883 		return ret;
884 
885 	return snd_sof_dsp_set_power_state(sdev, &target_state);
886 }
887 
888 int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
889 {
890 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
891 	struct hdac_bus *bus = sof_to_bus(sdev);
892 	struct pci_dev *pci = to_pci_dev(sdev->dev);
893 	const struct sof_dsp_power_state target_dsp_state = {
894 		.state = target_state,
895 		.substate = target_state == SOF_DSP_PM_D0 ?
896 				SOF_HDA_DSP_PM_D0I3 : 0,
897 	};
898 	int ret;
899 
900 	if (!sdev->dspless_mode_selected) {
901 		/* cancel any attempt for DSP D0I3 */
902 		cancel_delayed_work_sync(&hda->d0i3_work);
903 	}
904 
905 	if (target_state == SOF_DSP_PM_D0) {
906 		/* Set DSP power state */
907 		ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
908 		if (ret < 0) {
909 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
910 				target_dsp_state.state,
911 				target_dsp_state.substate);
912 			return ret;
913 		}
914 
915 		/* enable L1SEN to make sure the system can enter S0Ix */
916 		if (hda->l1_disabled)
917 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, HDA_VS_INTEL_EM2,
918 						HDA_VS_INTEL_EM2_L1SEN, HDA_VS_INTEL_EM2_L1SEN);
919 
920 		/* stop the CORB/RIRB DMA if it is On */
921 		hda_codec_suspend_cmd_io(sdev);
922 
923 		/* no link can be powered in s0ix state */
924 		ret = hda_bus_ml_suspend(bus);
925 		if (ret < 0) {
926 			dev_err(sdev->dev,
927 				"error %d in %s: failed to power down links",
928 				ret, __func__);
929 			return ret;
930 		}
931 
932 		/* enable the system waking up via IPC IRQ */
933 		enable_irq_wake(pci->irq);
934 		pci_save_state(pci);
935 		return 0;
936 	}
937 
938 	/* stop hda controller and power dsp off */
939 	ret = hda_suspend(sdev, false);
940 	if (ret < 0) {
941 		dev_err(bus->dev, "error: suspending dsp\n");
942 		return ret;
943 	}
944 
945 	return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
946 }
947 
948 static unsigned int hda_dsp_check_for_dma_streams(struct snd_sof_dev *sdev)
949 {
950 	struct hdac_bus *bus = sof_to_bus(sdev);
951 	struct hdac_stream *s;
952 	unsigned int active_streams = 0;
953 	int sd_offset;
954 	u32 val;
955 
956 	list_for_each_entry(s, &bus->stream_list, list) {
957 		sd_offset = SOF_STREAM_SD_OFFSET(s);
958 		val = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
959 				       sd_offset);
960 		if (val & SOF_HDA_SD_CTL_DMA_START)
961 			active_streams |= BIT(s->index);
962 	}
963 
964 	return active_streams;
965 }
966 
967 static int hda_dsp_s5_quirk(struct snd_sof_dev *sdev)
968 {
969 	int ret;
970 
971 	/*
972 	 * Do not assume a certain timing between the prior
973 	 * suspend flow, and running of this quirk function.
974 	 * This is needed if the controller was just put
975 	 * to reset before calling this function.
976 	 */
977 	usleep_range(500, 1000);
978 
979 	/*
980 	 * Take controller out of reset to flush DMA
981 	 * transactions.
982 	 */
983 	ret = hda_dsp_ctrl_link_reset(sdev, false);
984 	if (ret < 0)
985 		return ret;
986 
987 	usleep_range(500, 1000);
988 
989 	/* Restore state for shutdown, back to reset */
990 	ret = hda_dsp_ctrl_link_reset(sdev, true);
991 	if (ret < 0)
992 		return ret;
993 
994 	return ret;
995 }
996 
997 int hda_dsp_shutdown_dma_flush(struct snd_sof_dev *sdev)
998 {
999 	unsigned int active_streams;
1000 	int ret, ret2;
1001 
1002 	/* check if DMA cleanup has been successful */
1003 	active_streams = hda_dsp_check_for_dma_streams(sdev);
1004 
1005 	sdev->system_suspend_target = SOF_SUSPEND_S3;
1006 	ret = snd_sof_suspend(sdev->dev);
1007 
1008 	if (active_streams) {
1009 		dev_warn(sdev->dev,
1010 			 "There were active DSP streams (%#x) at shutdown, trying to recover\n",
1011 			 active_streams);
1012 		ret2 = hda_dsp_s5_quirk(sdev);
1013 		if (ret2 < 0)
1014 			dev_err(sdev->dev, "shutdown recovery failed (%d)\n", ret2);
1015 	}
1016 
1017 	return ret;
1018 }
1019 
1020 int hda_dsp_shutdown(struct snd_sof_dev *sdev)
1021 {
1022 	sdev->system_suspend_target = SOF_SUSPEND_S3;
1023 	return snd_sof_suspend(sdev->dev);
1024 }
1025 
1026 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
1027 {
1028 	int ret;
1029 
1030 	/* make sure all DAI resources are freed */
1031 	ret = hda_dsp_dais_suspend(sdev);
1032 	if (ret < 0)
1033 		dev_warn(sdev->dev, "%s: failure in hda_dsp_dais_suspend\n", __func__);
1034 
1035 	return ret;
1036 }
1037 
1038 void hda_dsp_d0i3_work(struct work_struct *work)
1039 {
1040 	struct sof_intel_hda_dev *hdev = container_of(work,
1041 						      struct sof_intel_hda_dev,
1042 						      d0i3_work.work);
1043 	struct hdac_bus *bus = &hdev->hbus.core;
1044 	struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev);
1045 	struct sof_dsp_power_state target_state = {
1046 		.state = SOF_DSP_PM_D0,
1047 		.substate = SOF_HDA_DSP_PM_D0I3,
1048 	};
1049 	int ret;
1050 
1051 	/* DSP can enter D0I3 iff only D0I3-compatible streams are active */
1052 	if (!snd_sof_dsp_only_d0i3_compatible_stream_active(sdev))
1053 		/* remain in D0I0 */
1054 		return;
1055 
1056 	/* This can fail but error cannot be propagated */
1057 	ret = snd_sof_dsp_set_power_state(sdev, &target_state);
1058 	if (ret < 0)
1059 		dev_err_ratelimited(sdev->dev,
1060 				    "error: failed to set DSP state %d substate %d\n",
1061 				    target_state.state, target_state.substate);
1062 }
1063 
1064 int hda_dsp_core_get(struct snd_sof_dev *sdev, int core)
1065 {
1066 	const struct sof_ipc_pm_ops *pm_ops = sdev->ipc->ops->pm;
1067 	int ret, ret1;
1068 
1069 	/* power up core */
1070 	ret = hda_dsp_enable_core(sdev, BIT(core));
1071 	if (ret < 0) {
1072 		dev_err(sdev->dev, "failed to power up core %d with err: %d\n",
1073 			core, ret);
1074 		return ret;
1075 	}
1076 
1077 	/* No need to send IPC for primary core or if FW boot is not complete */
1078 	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE || core == SOF_DSP_PRIMARY_CORE)
1079 		return 0;
1080 
1081 	/* No need to continue the set_core_state ops is not available */
1082 	if (!pm_ops->set_core_state)
1083 		return 0;
1084 
1085 	/* Now notify DSP for secondary cores */
1086 	ret = pm_ops->set_core_state(sdev, core, true);
1087 	if (ret < 0) {
1088 		dev_err(sdev->dev, "failed to enable secondary core '%d' failed with %d\n",
1089 			core, ret);
1090 		goto power_down;
1091 	}
1092 
1093 	return ret;
1094 
1095 power_down:
1096 	/* power down core if it is host managed and return the original error if this fails too */
1097 	ret1 = hda_dsp_core_reset_power_down(sdev, BIT(core));
1098 	if (ret1 < 0)
1099 		dev_err(sdev->dev, "failed to power down core: %d with err: %d\n", core, ret1);
1100 
1101 	return ret;
1102 }
1103 
1104 int hda_dsp_disable_interrupts(struct snd_sof_dev *sdev)
1105 {
1106 	hda_sdw_int_enable(sdev, false);
1107 	hda_dsp_ipc_int_disable(sdev);
1108 
1109 	return 0;
1110 }
1111