xref: /openbmc/linux/sound/soc/sof/intel/hda-dsp.c (revision 165f2d28)
1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Authors: Liam Girdwood <liam.r.girdwood@linux.intel.com>
9 //	    Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
10 //	    Rander Wang <rander.wang@intel.com>
11 //          Keyon Jie <yang.jie@linux.intel.com>
12 //
13 
14 /*
15  * Hardware interface for generic Intel audio DSP HDA IP
16  */
17 
18 #include <linux/module.h>
19 #include <sound/hdaudio_ext.h>
20 #include <sound/hda_register.h>
21 #include "../sof-audio.h"
22 #include "../ops.h"
23 #include "hda.h"
24 #include "hda-ipc.h"
25 
26 static bool hda_enable_trace_D0I3_S0;
27 #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG)
28 module_param_named(enable_trace_D0I3_S0, hda_enable_trace_D0I3_S0, bool, 0444);
29 MODULE_PARM_DESC(enable_trace_D0I3_S0,
30 		 "SOF HDA enable trace when the DSP is in D0I3 in S0");
31 #endif
32 
33 /*
34  * DSP Core control.
35  */
36 
37 int hda_dsp_core_reset_enter(struct snd_sof_dev *sdev, unsigned int core_mask)
38 {
39 	u32 adspcs;
40 	u32 reset;
41 	int ret;
42 
43 	/* set reset bits for cores */
44 	reset = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
45 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
46 					 HDA_DSP_REG_ADSPCS,
47 					 reset, reset),
48 
49 	/* poll with timeout to check if operation successful */
50 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
51 					HDA_DSP_REG_ADSPCS, adspcs,
52 					((adspcs & reset) == reset),
53 					HDA_DSP_REG_POLL_INTERVAL_US,
54 					HDA_DSP_RESET_TIMEOUT_US);
55 	if (ret < 0) {
56 		dev_err(sdev->dev,
57 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
58 			__func__);
59 		return ret;
60 	}
61 
62 	/* has core entered reset ? */
63 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
64 				  HDA_DSP_REG_ADSPCS);
65 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) !=
66 		HDA_DSP_ADSPCS_CRST_MASK(core_mask)) {
67 		dev_err(sdev->dev,
68 			"error: reset enter failed: core_mask %x adspcs 0x%x\n",
69 			core_mask, adspcs);
70 		ret = -EIO;
71 	}
72 
73 	return ret;
74 }
75 
76 int hda_dsp_core_reset_leave(struct snd_sof_dev *sdev, unsigned int core_mask)
77 {
78 	unsigned int crst;
79 	u32 adspcs;
80 	int ret;
81 
82 	/* clear reset bits for cores */
83 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
84 					 HDA_DSP_REG_ADSPCS,
85 					 HDA_DSP_ADSPCS_CRST_MASK(core_mask),
86 					 0);
87 
88 	/* poll with timeout to check if operation successful */
89 	crst = HDA_DSP_ADSPCS_CRST_MASK(core_mask);
90 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
91 					    HDA_DSP_REG_ADSPCS, adspcs,
92 					    !(adspcs & crst),
93 					    HDA_DSP_REG_POLL_INTERVAL_US,
94 					    HDA_DSP_RESET_TIMEOUT_US);
95 
96 	if (ret < 0) {
97 		dev_err(sdev->dev,
98 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
99 			__func__);
100 		return ret;
101 	}
102 
103 	/* has core left reset ? */
104 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
105 				  HDA_DSP_REG_ADSPCS);
106 	if ((adspcs & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) != 0) {
107 		dev_err(sdev->dev,
108 			"error: reset leave failed: core_mask %x adspcs 0x%x\n",
109 			core_mask, adspcs);
110 		ret = -EIO;
111 	}
112 
113 	return ret;
114 }
115 
116 int hda_dsp_core_stall_reset(struct snd_sof_dev *sdev, unsigned int core_mask)
117 {
118 	/* stall core */
119 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
120 					 HDA_DSP_REG_ADSPCS,
121 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
122 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
123 
124 	/* set reset state */
125 	return hda_dsp_core_reset_enter(sdev, core_mask);
126 }
127 
128 int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask)
129 {
130 	int ret;
131 
132 	/* leave reset state */
133 	ret = hda_dsp_core_reset_leave(sdev, core_mask);
134 	if (ret < 0)
135 		return ret;
136 
137 	/* run core */
138 	dev_dbg(sdev->dev, "unstall/run core: core_mask = %x\n", core_mask);
139 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
140 					 HDA_DSP_REG_ADSPCS,
141 					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
142 					 0);
143 
144 	/* is core now running ? */
145 	if (!hda_dsp_core_is_enabled(sdev, core_mask)) {
146 		hda_dsp_core_stall_reset(sdev, core_mask);
147 		dev_err(sdev->dev, "error: DSP start core failed: core_mask %x\n",
148 			core_mask);
149 		ret = -EIO;
150 	}
151 
152 	return ret;
153 }
154 
155 /*
156  * Power Management.
157  */
158 
159 int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask)
160 {
161 	unsigned int cpa;
162 	u32 adspcs;
163 	int ret;
164 
165 	/* update bits */
166 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS,
167 				HDA_DSP_ADSPCS_SPA_MASK(core_mask),
168 				HDA_DSP_ADSPCS_SPA_MASK(core_mask));
169 
170 	/* poll with timeout to check if operation successful */
171 	cpa = HDA_DSP_ADSPCS_CPA_MASK(core_mask);
172 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
173 					    HDA_DSP_REG_ADSPCS, adspcs,
174 					    (adspcs & cpa) == cpa,
175 					    HDA_DSP_REG_POLL_INTERVAL_US,
176 					    HDA_DSP_RESET_TIMEOUT_US);
177 	if (ret < 0) {
178 		dev_err(sdev->dev,
179 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
180 			__func__);
181 		return ret;
182 	}
183 
184 	/* did core power up ? */
185 	adspcs = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
186 				  HDA_DSP_REG_ADSPCS);
187 	if ((adspcs & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) !=
188 		HDA_DSP_ADSPCS_CPA_MASK(core_mask)) {
189 		dev_err(sdev->dev,
190 			"error: power up core failed core_mask %xadspcs 0x%x\n",
191 			core_mask, adspcs);
192 		ret = -EIO;
193 	}
194 
195 	return ret;
196 }
197 
198 int hda_dsp_core_power_down(struct snd_sof_dev *sdev, unsigned int core_mask)
199 {
200 	u32 adspcs;
201 	int ret;
202 
203 	/* update bits */
204 	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
205 					 HDA_DSP_REG_ADSPCS,
206 					 HDA_DSP_ADSPCS_SPA_MASK(core_mask), 0);
207 
208 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
209 				HDA_DSP_REG_ADSPCS, adspcs,
210 				!(adspcs & HDA_DSP_ADSPCS_SPA_MASK(core_mask)),
211 				HDA_DSP_REG_POLL_INTERVAL_US,
212 				HDA_DSP_PD_TIMEOUT * USEC_PER_MSEC);
213 	if (ret < 0)
214 		dev_err(sdev->dev,
215 			"error: %s: timeout on HDA_DSP_REG_ADSPCS read\n",
216 			__func__);
217 
218 	return ret;
219 }
220 
221 bool hda_dsp_core_is_enabled(struct snd_sof_dev *sdev,
222 			     unsigned int core_mask)
223 {
224 	int val;
225 	bool is_enable;
226 
227 	val = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS);
228 
229 	is_enable = ((val & HDA_DSP_ADSPCS_CPA_MASK(core_mask)) &&
230 			(val & HDA_DSP_ADSPCS_SPA_MASK(core_mask)) &&
231 			!(val & HDA_DSP_ADSPCS_CRST_MASK(core_mask)) &&
232 			!(val & HDA_DSP_ADSPCS_CSTALL_MASK(core_mask)));
233 
234 	dev_dbg(sdev->dev, "DSP core(s) enabled? %d : core_mask %x\n",
235 		is_enable, core_mask);
236 
237 	return is_enable;
238 }
239 
240 int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask)
241 {
242 	int ret;
243 
244 	/* return if core is already enabled */
245 	if (hda_dsp_core_is_enabled(sdev, core_mask))
246 		return 0;
247 
248 	/* power up */
249 	ret = hda_dsp_core_power_up(sdev, core_mask);
250 	if (ret < 0) {
251 		dev_err(sdev->dev, "error: dsp core power up failed: core_mask %x\n",
252 			core_mask);
253 		return ret;
254 	}
255 
256 	return hda_dsp_core_run(sdev, core_mask);
257 }
258 
259 int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev,
260 				  unsigned int core_mask)
261 {
262 	int ret;
263 
264 	/* place core in reset prior to power down */
265 	ret = hda_dsp_core_stall_reset(sdev, core_mask);
266 	if (ret < 0) {
267 		dev_err(sdev->dev, "error: dsp core reset failed: core_mask %x\n",
268 			core_mask);
269 		return ret;
270 	}
271 
272 	/* power down core */
273 	ret = hda_dsp_core_power_down(sdev, core_mask);
274 	if (ret < 0) {
275 		dev_err(sdev->dev, "error: dsp core power down fail mask %x: %d\n",
276 			core_mask, ret);
277 		return ret;
278 	}
279 
280 	/* make sure we are in OFF state */
281 	if (hda_dsp_core_is_enabled(sdev, core_mask)) {
282 		dev_err(sdev->dev, "error: dsp core disable fail mask %x: %d\n",
283 			core_mask, ret);
284 		ret = -EIO;
285 	}
286 
287 	return ret;
288 }
289 
290 void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev)
291 {
292 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
293 	const struct sof_intel_dsp_desc *chip = hda->desc;
294 
295 	/* enable IPC DONE and BUSY interrupts */
296 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
297 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY,
298 			HDA_DSP_REG_HIPCCTL_DONE | HDA_DSP_REG_HIPCCTL_BUSY);
299 
300 	/* enable IPC interrupt */
301 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
302 				HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
303 }
304 
305 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev)
306 {
307 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
308 	const struct sof_intel_dsp_desc *chip = hda->desc;
309 
310 	/* disable IPC interrupt */
311 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
312 				HDA_DSP_ADSPIC_IPC, 0);
313 
314 	/* disable IPC BUSY and DONE interrupt */
315 	snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
316 			HDA_DSP_REG_HIPCCTL_BUSY | HDA_DSP_REG_HIPCCTL_DONE, 0);
317 }
318 
319 static int hda_dsp_wait_d0i3c_done(struct snd_sof_dev *sdev)
320 {
321 	struct hdac_bus *bus = sof_to_bus(sdev);
322 	int retry = HDA_DSP_REG_POLL_RETRY_COUNT;
323 
324 	while (snd_hdac_chip_readb(bus, VS_D0I3C) & SOF_HDA_VS_D0I3C_CIP) {
325 		if (!retry--)
326 			return -ETIMEDOUT;
327 		usleep_range(10, 15);
328 	}
329 
330 	return 0;
331 }
332 
333 static int hda_dsp_send_pm_gate_ipc(struct snd_sof_dev *sdev, u32 flags)
334 {
335 	struct sof_ipc_pm_gate pm_gate;
336 	struct sof_ipc_reply reply;
337 
338 	memset(&pm_gate, 0, sizeof(pm_gate));
339 
340 	/* configure pm_gate ipc message */
341 	pm_gate.hdr.size = sizeof(pm_gate);
342 	pm_gate.hdr.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_GATE;
343 	pm_gate.flags = flags;
344 
345 	/* send pm_gate ipc to dsp */
346 	return sof_ipc_tx_message_no_pm(sdev->ipc, pm_gate.hdr.cmd,
347 					&pm_gate, sizeof(pm_gate), &reply,
348 					sizeof(reply));
349 }
350 
351 static int hda_dsp_update_d0i3c_register(struct snd_sof_dev *sdev, u8 value)
352 {
353 	struct hdac_bus *bus = sof_to_bus(sdev);
354 	int ret;
355 
356 	/* Write to D0I3C after Command-In-Progress bit is cleared */
357 	ret = hda_dsp_wait_d0i3c_done(sdev);
358 	if (ret < 0) {
359 		dev_err(bus->dev, "CIP timeout before D0I3C update!\n");
360 		return ret;
361 	}
362 
363 	/* Update D0I3C register */
364 	snd_hdac_chip_updateb(bus, VS_D0I3C, SOF_HDA_VS_D0I3C_I3, value);
365 
366 	/* Wait for cmd in progress to be cleared before exiting the function */
367 	ret = hda_dsp_wait_d0i3c_done(sdev);
368 	if (ret < 0) {
369 		dev_err(bus->dev, "CIP timeout after D0I3C update!\n");
370 		return ret;
371 	}
372 
373 	dev_vdbg(bus->dev, "D0I3C updated, register = 0x%x\n",
374 		 snd_hdac_chip_readb(bus, VS_D0I3C));
375 
376 	return 0;
377 }
378 
379 static int hda_dsp_set_D0_state(struct snd_sof_dev *sdev,
380 				const struct sof_dsp_power_state *target_state)
381 {
382 	u32 flags = 0;
383 	int ret;
384 	u8 value = 0;
385 
386 	/*
387 	 * Sanity check for illegal state transitions
388 	 * The only allowed transitions are:
389 	 * 1. D3 -> D0I0
390 	 * 2. D0I0 -> D0I3
391 	 * 3. D0I3 -> D0I0
392 	 */
393 	switch (sdev->dsp_power_state.state) {
394 	case SOF_DSP_PM_D0:
395 		/* Follow the sequence below for D0 substate transitions */
396 		break;
397 	case SOF_DSP_PM_D3:
398 		/* Follow regular flow for D3 -> D0 transition */
399 		return 0;
400 	default:
401 		dev_err(sdev->dev, "error: transition from %d to %d not allowed\n",
402 			sdev->dsp_power_state.state, target_state->state);
403 		return -EINVAL;
404 	}
405 
406 	/* Set flags and register value for D0 target substate */
407 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3) {
408 		value = SOF_HDA_VS_D0I3C_I3;
409 
410 		/*
411 		 * Trace DMA is disabled by default when the DSP enters D0I3.
412 		 * But it can be kept enabled when the DSP enters D0I3 while the
413 		 * system is in S0 for debug.
414 		 */
415 		if (hda_enable_trace_D0I3_S0 &&
416 		    sdev->system_suspend_target != SOF_SUSPEND_NONE)
417 			flags = HDA_PM_NO_DMA_TRACE;
418 	} else {
419 		/* prevent power gating in D0I0 */
420 		flags = HDA_PM_PPG;
421 	}
422 
423 	/* update D0I3C register */
424 	ret = hda_dsp_update_d0i3c_register(sdev, value);
425 	if (ret < 0)
426 		return ret;
427 
428 	/*
429 	 * Notify the DSP of the state change.
430 	 * If this IPC fails, revert the D0I3C register update in order
431 	 * to prevent partial state change.
432 	 */
433 	ret = hda_dsp_send_pm_gate_ipc(sdev, flags);
434 	if (ret < 0) {
435 		dev_err(sdev->dev,
436 			"error: PM_GATE ipc error %d\n", ret);
437 		goto revert;
438 	}
439 
440 	return ret;
441 
442 revert:
443 	/* fallback to the previous register value */
444 	value = value ? 0 : SOF_HDA_VS_D0I3C_I3;
445 
446 	/*
447 	 * This can fail but return the IPC error to signal that
448 	 * the state change failed.
449 	 */
450 	hda_dsp_update_d0i3c_register(sdev, value);
451 
452 	return ret;
453 }
454 
455 /* helper to log DSP state */
456 static void hda_dsp_state_log(struct snd_sof_dev *sdev)
457 {
458 	switch (sdev->dsp_power_state.state) {
459 	case SOF_DSP_PM_D0:
460 		switch (sdev->dsp_power_state.substate) {
461 		case SOF_HDA_DSP_PM_D0I0:
462 			dev_dbg(sdev->dev, "Current DSP power state: D0I0\n");
463 			break;
464 		case SOF_HDA_DSP_PM_D0I3:
465 			dev_dbg(sdev->dev, "Current DSP power state: D0I3\n");
466 			break;
467 		default:
468 			dev_dbg(sdev->dev, "Unknown DSP D0 substate: %d\n",
469 				sdev->dsp_power_state.substate);
470 			break;
471 		}
472 		break;
473 	case SOF_DSP_PM_D1:
474 		dev_dbg(sdev->dev, "Current DSP power state: D1\n");
475 		break;
476 	case SOF_DSP_PM_D2:
477 		dev_dbg(sdev->dev, "Current DSP power state: D2\n");
478 		break;
479 	case SOF_DSP_PM_D3_HOT:
480 		dev_dbg(sdev->dev, "Current DSP power state: D3_HOT\n");
481 		break;
482 	case SOF_DSP_PM_D3:
483 		dev_dbg(sdev->dev, "Current DSP power state: D3\n");
484 		break;
485 	case SOF_DSP_PM_D3_COLD:
486 		dev_dbg(sdev->dev, "Current DSP power state: D3_COLD\n");
487 		break;
488 	default:
489 		dev_dbg(sdev->dev, "Unknown DSP power state: %d\n",
490 			sdev->dsp_power_state.state);
491 		break;
492 	}
493 }
494 
495 /*
496  * All DSP power state transitions are initiated by the driver.
497  * If the requested state change fails, the error is simply returned.
498  * Further state transitions are attempted only when the set_power_save() op
499  * is called again either because of a new IPC sent to the DSP or
500  * during system suspend/resume.
501  */
502 int hda_dsp_set_power_state(struct snd_sof_dev *sdev,
503 			    const struct sof_dsp_power_state *target_state)
504 {
505 	int ret = 0;
506 
507 	/*
508 	 * When the DSP is already in D0I3 and the target state is D0I3,
509 	 * it could be the case that the DSP is in D0I3 during S0
510 	 * and the system is suspending to S0Ix. Therefore,
511 	 * hda_dsp_set_D0_state() must be called to disable trace DMA
512 	 * by sending the PM_GATE IPC to the FW.
513 	 */
514 	if (target_state->substate == SOF_HDA_DSP_PM_D0I3 &&
515 	    sdev->system_suspend_target == SOF_SUSPEND_S0IX)
516 		goto set_state;
517 
518 	/*
519 	 * For all other cases, return without doing anything if
520 	 * the DSP is already in the target state.
521 	 */
522 	if (target_state->state == sdev->dsp_power_state.state &&
523 	    target_state->substate == sdev->dsp_power_state.substate)
524 		return 0;
525 
526 set_state:
527 	switch (target_state->state) {
528 	case SOF_DSP_PM_D0:
529 		ret = hda_dsp_set_D0_state(sdev, target_state);
530 		break;
531 	case SOF_DSP_PM_D3:
532 		/* The only allowed transition is: D0I0 -> D3 */
533 		if (sdev->dsp_power_state.state == SOF_DSP_PM_D0 &&
534 		    sdev->dsp_power_state.substate == SOF_HDA_DSP_PM_D0I0)
535 			break;
536 
537 		dev_err(sdev->dev,
538 			"error: transition from %d to %d not allowed\n",
539 			sdev->dsp_power_state.state, target_state->state);
540 		return -EINVAL;
541 	default:
542 		dev_err(sdev->dev, "error: target state unsupported %d\n",
543 			target_state->state);
544 		return -EINVAL;
545 	}
546 	if (ret < 0) {
547 		dev_err(sdev->dev,
548 			"failed to set requested target DSP state %d substate %d\n",
549 			target_state->state, target_state->substate);
550 		return ret;
551 	}
552 
553 	sdev->dsp_power_state = *target_state;
554 	hda_dsp_state_log(sdev);
555 	return ret;
556 }
557 
558 /*
559  * Audio DSP states may transform as below:-
560  *
561  *                                         Opportunistic D0I3 in S0
562  *     Runtime    +---------------------+  Delayed D0i3 work timeout
563  *     suspend    |                     +--------------------+
564  *   +------------+       D0I0(active)  |                    |
565  *   |            |                     <---------------+    |
566  *   |   +-------->                     |    New IPC	|    |
567  *   |   |Runtime +--^--+---------^--+--+ (via mailbox)	|    |
568  *   |   |resume     |  |         |  |			|    |
569  *   |   |           |  |         |  |			|    |
570  *   |   |     System|  |         |  |			|    |
571  *   |   |     resume|  | S3/S0IX |  |                  |    |
572  *   |   |	     |  | suspend |  | S0IX             |    |
573  *   |   |           |  |         |  |suspend           |    |
574  *   |   |           |  |         |  |                  |    |
575  *   |   |           |  |         |  |                  |    |
576  * +-v---+-----------+--v-------+ |  |           +------+----v----+
577  * |                            | |  +----------->                |
578  * |       D3 (suspended)       | |              |      D0I3      |
579  * |                            | +--------------+                |
580  * |                            |  System resume |                |
581  * +----------------------------+		 +----------------+
582  *
583  * S0IX suspend: The DSP is in D0I3 if any D0I3-compatible streams
584  *		 ignored the suspend trigger. Otherwise the DSP
585  *		 is in D3.
586  */
587 
588 static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
589 {
590 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
591 	const struct sof_intel_dsp_desc *chip = hda->desc;
592 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
593 	struct hdac_bus *bus = sof_to_bus(sdev);
594 #endif
595 	int ret;
596 
597 	hda_sdw_int_enable(sdev, false);
598 
599 	/* disable IPC interrupts */
600 	hda_dsp_ipc_int_disable(sdev);
601 
602 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
603 	if (runtime_suspend)
604 		hda_codec_jack_wake_enable(sdev);
605 
606 	/* power down all hda link */
607 	snd_hdac_ext_bus_link_power_down_all(bus);
608 #endif
609 
610 	/* power down DSP */
611 	ret = hda_dsp_core_reset_power_down(sdev, chip->cores_mask);
612 	if (ret < 0) {
613 		dev_err(sdev->dev,
614 			"error: failed to power down core during suspend\n");
615 		return ret;
616 	}
617 
618 	/* disable ppcap interrupt */
619 	hda_dsp_ctrl_ppcap_enable(sdev, false);
620 	hda_dsp_ctrl_ppcap_int_enable(sdev, false);
621 
622 	/* disable hda bus irq and streams */
623 	hda_dsp_ctrl_stop_chip(sdev);
624 
625 	/* disable LP retention mode */
626 	snd_sof_pci_update_bits(sdev, PCI_PGCTL,
627 				PCI_PGCTL_LSRMD_MASK, PCI_PGCTL_LSRMD_MASK);
628 
629 	/* reset controller */
630 	ret = hda_dsp_ctrl_link_reset(sdev, true);
631 	if (ret < 0) {
632 		dev_err(sdev->dev,
633 			"error: failed to reset controller during suspend\n");
634 		return ret;
635 	}
636 
637 	/* display codec can powered off after link reset */
638 	hda_codec_i915_display_power(sdev, false);
639 
640 	return 0;
641 }
642 
643 static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume)
644 {
645 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
646 	struct hdac_bus *bus = sof_to_bus(sdev);
647 	struct hdac_ext_link *hlink = NULL;
648 #endif
649 	int ret;
650 
651 	/* display codec must be powered before link reset */
652 	hda_codec_i915_display_power(sdev, true);
653 
654 	/*
655 	 * clear TCSEL to clear playback on some HD Audio
656 	 * codecs. PCI TCSEL is defined in the Intel manuals.
657 	 */
658 	snd_sof_pci_update_bits(sdev, PCI_TCSEL, 0x07, 0);
659 
660 	/* reset and start hda controller */
661 	ret = hda_dsp_ctrl_init_chip(sdev, true);
662 	if (ret < 0) {
663 		dev_err(sdev->dev,
664 			"error: failed to start controller after resume\n");
665 		return ret;
666 	}
667 
668 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
669 	/* check jack status */
670 	if (runtime_resume)
671 		hda_codec_jack_check(sdev);
672 
673 	/* turn off the links that were off before suspend */
674 	list_for_each_entry(hlink, &bus->hlink_list, list) {
675 		if (!hlink->ref_count)
676 			snd_hdac_ext_bus_link_power_down(hlink);
677 	}
678 
679 	/* check dma status and clean up CORB/RIRB buffers */
680 	if (!bus->cmd_dma_state)
681 		snd_hdac_bus_stop_cmd_io(bus);
682 #endif
683 
684 	/* enable ppcap interrupt */
685 	hda_dsp_ctrl_ppcap_enable(sdev, true);
686 	hda_dsp_ctrl_ppcap_int_enable(sdev, true);
687 
688 	return 0;
689 }
690 
691 int hda_dsp_resume(struct snd_sof_dev *sdev)
692 {
693 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
694 	struct pci_dev *pci = to_pci_dev(sdev->dev);
695 	const struct sof_dsp_power_state target_state = {
696 		.state = SOF_DSP_PM_D0,
697 		.substate = SOF_HDA_DSP_PM_D0I0,
698 	};
699 	int ret;
700 
701 	/* resume from D0I3 */
702 	if (sdev->dsp_power_state.state == SOF_DSP_PM_D0) {
703 		hda_codec_i915_display_power(sdev, true);
704 
705 		/* Set DSP power state */
706 		ret = snd_sof_dsp_set_power_state(sdev, &target_state);
707 		if (ret < 0) {
708 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
709 				target_state.state, target_state.substate);
710 			return ret;
711 		}
712 
713 		/* restore L1SEN bit */
714 		if (hda->l1_support_changed)
715 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
716 						HDA_VS_INTEL_EM2,
717 						HDA_VS_INTEL_EM2_L1SEN, 0);
718 
719 		/* restore and disable the system wakeup */
720 		pci_restore_state(pci);
721 		disable_irq_wake(pci->irq);
722 		return 0;
723 	}
724 
725 	/* init hda controller. DSP cores will be powered up during fw boot */
726 	ret = hda_resume(sdev, false);
727 	if (ret < 0)
728 		return ret;
729 
730 	return snd_sof_dsp_set_power_state(sdev, &target_state);
731 }
732 
733 int hda_dsp_runtime_resume(struct snd_sof_dev *sdev)
734 {
735 	const struct sof_dsp_power_state target_state = {
736 		.state = SOF_DSP_PM_D0,
737 	};
738 	int ret;
739 
740 	/* init hda controller. DSP cores will be powered up during fw boot */
741 	ret = hda_resume(sdev, true);
742 	if (ret < 0)
743 		return ret;
744 
745 	return snd_sof_dsp_set_power_state(sdev, &target_state);
746 }
747 
748 int hda_dsp_runtime_idle(struct snd_sof_dev *sdev)
749 {
750 	struct hdac_bus *hbus = sof_to_bus(sdev);
751 
752 	if (hbus->codec_powered) {
753 		dev_dbg(sdev->dev, "some codecs still powered (%08X), not idle\n",
754 			(unsigned int)hbus->codec_powered);
755 		return -EBUSY;
756 	}
757 
758 	return 0;
759 }
760 
761 int hda_dsp_runtime_suspend(struct snd_sof_dev *sdev)
762 {
763 	const struct sof_dsp_power_state target_state = {
764 		.state = SOF_DSP_PM_D3,
765 	};
766 	int ret;
767 
768 	/* stop hda controller and power dsp off */
769 	ret = hda_suspend(sdev, true);
770 	if (ret < 0)
771 		return ret;
772 
773 	return snd_sof_dsp_set_power_state(sdev, &target_state);
774 }
775 
776 int hda_dsp_suspend(struct snd_sof_dev *sdev, u32 target_state)
777 {
778 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
779 	struct hdac_bus *bus = sof_to_bus(sdev);
780 	struct pci_dev *pci = to_pci_dev(sdev->dev);
781 	const struct sof_dsp_power_state target_dsp_state = {
782 		.state = target_state,
783 		.substate = target_state == SOF_DSP_PM_D0 ?
784 				SOF_HDA_DSP_PM_D0I3 : 0,
785 	};
786 	int ret;
787 
788 	/* cancel any attempt for DSP D0I3 */
789 	cancel_delayed_work_sync(&hda->d0i3_work);
790 
791 	if (target_state == SOF_DSP_PM_D0) {
792 		/* we can't keep a wakeref to display driver at suspend */
793 		hda_codec_i915_display_power(sdev, false);
794 
795 		/* Set DSP power state */
796 		ret = snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
797 		if (ret < 0) {
798 			dev_err(sdev->dev, "error: setting dsp state %d substate %d\n",
799 				target_dsp_state.state,
800 				target_dsp_state.substate);
801 			return ret;
802 		}
803 
804 		/* enable L1SEN to make sure the system can enter S0Ix */
805 		hda->l1_support_changed =
806 			snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR,
807 						HDA_VS_INTEL_EM2,
808 						HDA_VS_INTEL_EM2_L1SEN,
809 						HDA_VS_INTEL_EM2_L1SEN);
810 
811 		/* enable the system waking up via IPC IRQ */
812 		enable_irq_wake(pci->irq);
813 		pci_save_state(pci);
814 		return 0;
815 	}
816 
817 	/* stop hda controller and power dsp off */
818 	ret = hda_suspend(sdev, false);
819 	if (ret < 0) {
820 		dev_err(bus->dev, "error: suspending dsp\n");
821 		return ret;
822 	}
823 
824 	return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
825 }
826 
827 int hda_dsp_set_hw_params_upon_resume(struct snd_sof_dev *sdev)
828 {
829 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
830 	struct hdac_bus *bus = sof_to_bus(sdev);
831 	struct snd_soc_pcm_runtime *rtd;
832 	struct hdac_ext_stream *stream;
833 	struct hdac_ext_link *link;
834 	struct hdac_stream *s;
835 	const char *name;
836 	int stream_tag;
837 
838 	/* set internal flag for BE */
839 	list_for_each_entry(s, &bus->stream_list, list) {
840 		stream = stream_to_hdac_ext_stream(s);
841 
842 		/*
843 		 * clear stream. This should already be taken care for running
844 		 * streams when the SUSPEND trigger is called. But paused
845 		 * streams do not get suspended, so this needs to be done
846 		 * explicitly during suspend.
847 		 */
848 		if (stream->link_substream) {
849 			rtd = snd_pcm_substream_chip(stream->link_substream);
850 			name = asoc_rtd_to_codec(rtd, 0)->component->name;
851 			link = snd_hdac_ext_bus_get_link(bus, name);
852 			if (!link)
853 				return -EINVAL;
854 
855 			stream->link_prepared = 0;
856 
857 			if (hdac_stream(stream)->direction ==
858 				SNDRV_PCM_STREAM_CAPTURE)
859 				continue;
860 
861 			stream_tag = hdac_stream(stream)->stream_tag;
862 			snd_hdac_ext_link_clear_stream_id(link, stream_tag);
863 		}
864 	}
865 #endif
866 	return 0;
867 }
868 
869 void hda_dsp_d0i3_work(struct work_struct *work)
870 {
871 	struct sof_intel_hda_dev *hdev = container_of(work,
872 						      struct sof_intel_hda_dev,
873 						      d0i3_work.work);
874 	struct hdac_bus *bus = &hdev->hbus.core;
875 	struct snd_sof_dev *sdev = dev_get_drvdata(bus->dev);
876 	struct sof_dsp_power_state target_state;
877 	int ret;
878 
879 	target_state.state = SOF_DSP_PM_D0;
880 
881 	/* DSP can enter D0I3 iff only D0I3-compatible streams are active */
882 	if (snd_sof_dsp_only_d0i3_compatible_stream_active(sdev))
883 		target_state.substate = SOF_HDA_DSP_PM_D0I3;
884 	else
885 		target_state.substate = SOF_HDA_DSP_PM_D0I0;
886 
887 	/* remain in D0I0 */
888 	if (target_state.substate == SOF_HDA_DSP_PM_D0I0)
889 		return;
890 
891 	/* This can fail but error cannot be propagated */
892 	ret = snd_sof_dsp_set_power_state(sdev, &target_state);
893 	if (ret < 0)
894 		dev_err_ratelimited(sdev->dev,
895 				    "error: failed to set DSP state %d substate %d\n",
896 				    target_state.state, target_state.substate);
897 }
898