xref: /openbmc/linux/sound/soc/sof/intel/hda-bus.c (revision 92481c7d)
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
2 //
3 // This file is provided under a dual BSD/GPLv2 license.  When using or
4 // redistributing this file, you may do so under either license.
5 //
6 // Copyright(c) 2018 Intel Corporation. All rights reserved.
7 //
8 // Authors: Keyon Jie <yang.jie@linux.intel.com>
9 
10 #include <linux/io.h>
11 #include <sound/hdaudio.h>
12 #include <sound/hda_i915.h>
13 #include <sound/hda_codec.h>
14 #include <sound/hda_register.h>
15 #include "../sof-priv.h"
16 #include "hda.h"
17 
18 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC)
19 #include "../../codecs/hdac_hda.h"
20 #define sof_hda_ext_ops	snd_soc_hdac_hda_get_ops()
21 #else
22 #define sof_hda_ext_ops	NULL
23 #endif
24 
25 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
26 static void update_codec_wake_enable(struct hdac_bus *bus, unsigned int addr, bool link_power)
27 {
28 	unsigned int mask = snd_hdac_chip_readw(bus, WAKEEN);
29 
30 	if (link_power)
31 		mask &= ~BIT(addr);
32 	else
33 		mask |= BIT(addr);
34 
35 	snd_hdac_chip_updatew(bus, WAKEEN, STATESTS_INT_MASK, mask);
36 }
37 
38 static void sof_hda_bus_link_power(struct hdac_device *codec, bool enable)
39 {
40 	struct hdac_bus *bus = codec->bus;
41 	bool oldstate = test_bit(codec->addr, &bus->codec_powered);
42 
43 	snd_hdac_ext_bus_link_power(codec, enable);
44 
45 	if (enable == oldstate)
46 		return;
47 
48 	/*
49 	 * Both codec driver and controller can hold references to
50 	 * display power. To avoid unnecessary power-up/down cycles,
51 	 * controller doesn't immediately release its reference.
52 	 *
53 	 * If the codec driver powers down the link, release
54 	 * the controller reference as well.
55 	 */
56 	if (codec->addr == HDA_IDISP_ADDR && !enable)
57 		snd_hdac_display_power(bus, HDA_CODEC_IDX_CONTROLLER, false);
58 
59 	/* WAKEEN needs to be set for disabled links */
60 	update_codec_wake_enable(bus, codec->addr, enable);
61 }
62 
63 static const struct hdac_bus_ops bus_core_ops = {
64 	.command = snd_hdac_bus_send_cmd,
65 	.get_response = snd_hdac_bus_get_response,
66 	.link_power = sof_hda_bus_link_power,
67 };
68 #endif
69 
70 /*
71  * This can be used for both with/without hda link support.
72  */
73 void sof_hda_bus_init(struct hdac_bus *bus, struct device *dev)
74 {
75 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
76 	snd_hdac_ext_bus_init(bus, dev, &bus_core_ops, sof_hda_ext_ops);
77 #else /* CONFIG_SND_SOC_SOF_HDA */
78 	memset(bus, 0, sizeof(*bus));
79 	bus->dev = dev;
80 
81 	INIT_LIST_HEAD(&bus->stream_list);
82 
83 	bus->irq = -1;
84 
85 	/*
86 	 * There is only one HDA bus atm. keep the index as 0.
87 	 * Need to fix when there are more than one HDA bus.
88 	 */
89 	bus->idx = 0;
90 
91 	spin_lock_init(&bus->reg_lock);
92 #endif /* CONFIG_SND_SOC_SOF_HDA */
93 }
94