1# SPDX-License-Identifier: GPL-2.0-only 2config SND_SOC_SOF_TOPLEVEL 3 bool "Sound Open Firmware Support" 4 help 5 This adds support for Sound Open Firmware (SOF). SOF is a free and 6 generic open source audio DSP firmware for multiple devices. 7 Say Y if you have such a device that is supported by SOF. 8 If unsure select "N". 9 10if SND_SOC_SOF_TOPLEVEL 11 12config SND_SOC_SOF_PCI 13 tristate "SOF PCI enumeration support" 14 depends on PCI 15 select SND_SOC_SOF 16 select SND_SOC_ACPI if ACPI 17 help 18 This adds support for PCI enumeration. This option is 19 required to enable Intel Skylake+ devices 20 Say Y if you need this option 21 If unsure select "N". 22 23config SND_SOC_SOF_ACPI 24 tristate "SOF ACPI enumeration support" 25 depends on ACPI || COMPILE_TEST 26 select SND_SOC_SOF 27 select SND_SOC_ACPI if ACPI 28 select IOSF_MBI if X86 && PCI 29 help 30 This adds support for ACPI enumeration. This option is required 31 to enable Intel Broadwell/Baytrail/Cherrytrail devices 32 Say Y if you need this option 33 If unsure select "N". 34 35config SND_SOC_SOF_OF 36 tristate "SOF OF enumeration support" 37 depends on OF || COMPILE_TEST 38 select SND_SOC_SOF 39 help 40 This adds support for Device Tree enumeration. This option is 41 required to enable i.MX8 devices. 42 Say Y if you need this option. If unsure select "N". 43 44config SND_SOC_SOF_DEVELOPER_SUPPORT 45 bool "SOF developer options support" 46 depends on EXPERT 47 help 48 This option unlock SOF developer options for debug/performance/ 49 code hardening. 50 Distributions should not select this option, only SOF development 51 teams should select it. 52 Say Y if you are involved in SOF development and need this option 53 If not, select N 54 55if SND_SOC_SOF_DEVELOPER_SUPPORT 56 57config SND_SOC_SOF_NOCODEC 58 tristate 59 60config SND_SOC_SOF_NOCODEC_SUPPORT 61 bool "SOF nocodec mode support" 62 help 63 This adds support for a dummy/nocodec machine driver fallback 64 option if no known codec is detected. This is typically only 65 enabled for developers or devices where the sound card is 66 controlled externally 67 This option is mutually exclusive with the Intel HDaudio support, 68 selecting it may have negative impacts and prevent e.g. microphone 69 functionality from being enabled on Intel CoffeeLake and later 70 platforms. 71 Distributions should not select this option! 72 Say Y if you need this nocodec fallback option 73 If unsure select "N". 74 75config SND_SOC_SOF_STRICT_ABI_CHECKS 76 bool "SOF strict ABI checks" 77 help 78 This option enables strict ABI checks for firmware and topology 79 files. 80 When these files are more recent than the kernel, the kernel 81 will handle the functionality it supports and may report errors 82 during topology creation or run-time usage if new functionality 83 is invoked. 84 This option will stop topology creation and firmware load upfront. 85 It is intended for SOF CI/releases and not for users or distros. 86 Say Y if you want strict ABI checks for an SOF release 87 If you are not involved in SOF releases and CI development 88 select "N". 89 90config SND_SOC_SOF_DEBUG 91 bool "SOF debugging features" 92 help 93 This option can be used to enable or disable individual SOF firmware 94 and driver debugging options. 95 Say Y if you are debugging SOF FW or drivers. 96 If unsure select "N". 97 98if SND_SOC_SOF_DEBUG 99 100config SND_SOC_SOF_FORCE_NOCODEC_MODE 101 bool "SOF force nocodec Mode" 102 depends on SND_SOC_SOF_NOCODEC_SUPPORT 103 help 104 This forces SOF to use dummy/nocodec as machine driver, even 105 though there is a codec detected on the real platform. This is 106 typically only enabled for developers for debug purposes, before 107 codec/machine driver is ready, or to exclude the impact of those 108 drivers 109 Say Y if you need this force nocodec mode option 110 If unsure select "N". 111 112config SND_SOC_SOF_DEBUG_XRUN_STOP 113 bool "SOF stop on XRUN" 114 help 115 This option forces PCMs to stop on any XRUN event. This is useful to 116 preserve any trace data ond pipeline status prior to the XRUN. 117 Say Y if you are debugging SOF FW pipeline XRUNs. 118 If unsure select "N". 119 120config SND_SOC_SOF_DEBUG_VERBOSE_IPC 121 bool "SOF verbose IPC logs" 122 help 123 This option enables more verbose IPC logs, with command types in 124 human-readable form instead of just 32-bit hex dumps. This is useful 125 if you are trying to debug IPC with the DSP firmware. 126 If unsure select "N". 127 128config SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION 129 bool "SOF force to use IPC for position update on SKL+" 130 help 131 This option force to handle stream position update IPCs and run pcm 132 elapse to inform ALSA about that, on platforms (e.g. Intel SKL+) that 133 with other approach (e.g. HDAC DPIB/posbuf) to elapse PCM. 134 On platforms (e.g. Intel SKL-) where position update IPC is the only 135 one choice, this setting won't impact anything. 136 if you are trying to debug pointer update with position IPCs or where 137 DPIB/posbuf is not ready, select "Y". 138 If unsure select "N". 139 140config SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE 141 bool "SOF enable debugfs caching" 142 help 143 This option enables caching of debugfs 144 memory -> DSP resource (memory, register, etc) 145 before the audio DSP is suspended. This will increase the suspend 146 latency and therefore should be used for debug purposes only. 147 Say Y if you want to enable caching the memory windows. 148 If unsure, select "N". 149 150config SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE 151 bool "SOF enable firmware trace" 152 help 153 The firmware trace can be enabled either at build-time with 154 this option, or dynamically by setting flags in the SOF core 155 module parameter (similar to dynamic debug) 156 If unsure, select "N". 157 158config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST 159 bool "SOF enable IPC flood test" 160 help 161 This option enables the IPC flood test which can be used to flood 162 the DSP with test IPCs and gather stats about response times. 163 Say Y if you want to enable IPC flood test. 164 If unsure, select "N". 165 166config SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT 167 bool "SOF retain DSP context on any FW exceptions" 168 help 169 This option keeps the DSP in D0 state so that firmware debug 170 information can be retained and dumped to userspace. 171 Say Y if you want to retain DSP context for FW exceptions. 172 If unsure, select "N". 173 174endif ## SND_SOC_SOF_DEBUG 175 176endif ## SND_SOC_SOF_DEVELOPER_SUPPORT 177 178config SND_SOC_SOF 179 tristate 180 select SND_SOC_TOPOLOGY 181 select SND_SOC_SOF_NOCODEC if SND_SOC_SOF_NOCODEC_SUPPORT 182 help 183 This option is not user-selectable but automagically handled by 184 'select' statements at a higher level 185 The selection is made at the top level and does not exactly follow 186 module dependencies but since the module or built-in type is decided 187 at the top level it doesn't matter. 188 189config SND_SOC_SOF_PROBE_WORK_QUEUE 190 bool 191 help 192 This option is not user-selectable but automagically handled by 193 'select' statements at a higher level 194 When selected, the probe is handled in two steps, for example to 195 avoid lockdeps if request_module is used in the probe. 196 197source "sound/soc/sof/imx/Kconfig" 198source "sound/soc/sof/intel/Kconfig" 199source "sound/soc/sof/xtensa/Kconfig" 200 201endif 202