xref: /openbmc/linux/sound/soc/sof/Kconfig (revision 5b7b41cb) 
1# SPDX-License-Identifier: GPL-2.0-only
2config SND_SOC_SOF_TOPLEVEL
3	bool "Sound Open Firmware Support"
4	help
5	  This adds support for Sound Open Firmware (SOF). SOF is a free and
6	  generic open source audio DSP firmware for multiple devices.
7	  Say Y if you have such a device that is supported by SOF.
8	  If unsure select "N".
9
10if SND_SOC_SOF_TOPLEVEL
11
12config SND_SOC_SOF_PCI
13	tristate "SOF PCI enumeration support"
14	depends on PCI
15	select SND_SOC_SOF
16	select SND_SOC_ACPI if ACPI
17	help
18	  This adds support for PCI enumeration. This option is
19	  required to enable Intel Skylake+ devices
20	  Say Y if you need this option
21	  If unsure select "N".
22
23config SND_SOC_SOF_ACPI
24	tristate "SOF ACPI enumeration support"
25	depends on ACPI || COMPILE_TEST
26	select SND_SOC_SOF
27	select SND_SOC_ACPI if ACPI
28	select IOSF_MBI if X86 && PCI
29	help
30	  This adds support for ACPI enumeration. This option is required
31	  to enable Intel Broadwell/Baytrail/Cherrytrail devices
32	  Say Y if you need this option
33	  If unsure select "N".
34
35config SND_SOC_SOF_OF
36	tristate "SOF OF enumeration support"
37	depends on OF || COMPILE_TEST
38	select SND_SOC_SOF
39	help
40	  This adds support for Device Tree enumeration. This option is
41	  required to enable i.MX8 devices.
42	  Say Y if you need this option. If unsure select "N".
43
44config SND_SOC_SOF_DEBUG_PROBES
45	bool "SOF enable data probing"
46	select SND_SOC_COMPRESS
47	help
48	  This option enables the data probing feature that can be used to
49	  gather data directly from specific points of the audio pipeline.
50	  Say Y if you want to enable probes.
51	  If unsure, select "N".
52
53config SND_SOC_SOF_DEVELOPER_SUPPORT
54	bool "SOF developer options support"
55	depends on EXPERT
56	help
57	  This option unlock SOF developer options for debug/performance/
58	  code hardening.
59	  Distributions should not select this option, only SOF development
60	  teams should select it.
61	  Say Y if you are involved in SOF development and need this option
62	  If not, select N
63
64if SND_SOC_SOF_DEVELOPER_SUPPORT
65
66config SND_SOC_SOF_NOCODEC
67	tristate
68
69config SND_SOC_SOF_NOCODEC_SUPPORT
70	bool "SOF nocodec mode support"
71	help
72	  This adds support for a dummy/nocodec machine driver fallback
73	  option if no known codec is detected. This is typically only
74	  enabled for developers or devices where the sound card is
75	  controlled externally
76	  This option is mutually exclusive with the Intel HDAudio support,
77	  selecting it may have negative impacts and prevent e.g. microphone
78	  functionality from being enabled on Intel CoffeeLake and later
79	  platforms.
80	  Distributions should not select this option!
81	  Say Y if you need this nocodec fallback option
82	  If unsure select "N".
83
84config SND_SOC_SOF_STRICT_ABI_CHECKS
85	bool "SOF strict ABI checks"
86	help
87	  This option enables strict ABI checks for firmware and topology
88	  files.
89	  When these files are more recent than the kernel, the kernel
90	  will handle the functionality it supports and may report errors
91	  during topology creation or run-time usage if new functionality
92	  is invoked.
93	  This option will stop topology creation and firmware load upfront.
94	  It is intended for SOF CI/releases and not for users or distros.
95	  Say Y if you want strict ABI checks for an SOF release
96	  If you are not involved in SOF releases and CI development
97	  select "N".
98
99config SND_SOC_SOF_DEBUG
100	bool "SOF debugging features"
101	help
102	  This option can be used to enable or disable individual SOF firmware
103	  and driver debugging options.
104	  Say Y if you are debugging SOF FW or drivers.
105	  If unsure select "N".
106
107if SND_SOC_SOF_DEBUG
108
109config SND_SOC_SOF_FORCE_NOCODEC_MODE
110	bool "SOF force nocodec Mode"
111	depends on SND_SOC_SOF_NOCODEC_SUPPORT
112	help
113	  This forces SOF to use dummy/nocodec as machine driver, even
114	  though there is a codec detected on the real platform. This is
115	  typically only enabled for developers for debug purposes, before
116	  codec/machine driver is ready, or to exclude the impact of those
117	  drivers
118	  Say Y if you need this force nocodec mode option
119	  If unsure select "N".
120
121config SND_SOC_SOF_DEBUG_XRUN_STOP
122	bool "SOF stop on XRUN"
123	help
124	  This option forces PCMs to stop on any XRUN event. This is useful to
125	  preserve any trace data ond pipeline status prior to the XRUN.
126	  Say Y if you are debugging SOF FW pipeline XRUNs.
127	  If unsure select "N".
128
129config SND_SOC_SOF_DEBUG_VERBOSE_IPC
130	bool "SOF verbose IPC logs"
131	help
132	  This option enables more verbose IPC logs, with command types in
133	  human-readable form instead of just 32-bit hex dumps. This is useful
134	  if you are trying to debug IPC with the DSP firmware.
135	  If unsure select "N".
136
137config SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION
138	bool "SOF force to use IPC for position update on SKL+"
139	help
140	  This option force to handle stream position update IPCs and run pcm
141	  elapse to inform ALSA about that, on platforms (e.g. Intel SKL+) that
142	  with other approach (e.g. HDAC DPIB/posbuf) to elapse PCM.
143	  On platforms (e.g. Intel SKL-) where position update IPC is the only
144	  one choice, this setting won't impact anything.
145	  if you are trying to debug pointer update with position IPCs or where
146	  DPIB/posbuf is not ready, select "Y".
147	  If unsure select "N".
148
149config SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE
150	bool "SOF enable debugfs caching"
151	help
152	  This option enables caching of debugfs
153	  memory -> DSP resource (memory, register, etc)
154	  before the audio DSP is suspended. This will increase the suspend
155	  latency and therefore should be used for debug purposes only.
156	  Say Y if you want to enable caching the memory windows.
157	  If unsure, select "N".
158
159config SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE
160	bool "SOF enable firmware trace"
161	help
162	  The firmware trace can be enabled either at build-time with
163	  this option, or dynamically by setting flags in the SOF core
164	  module parameter (similar to dynamic debug)
165	  If unsure, select "N".
166
167config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST
168	bool "SOF enable IPC flood test"
169	help
170	  This option enables the IPC flood test which can be used to flood
171	  the DSP with test IPCs and gather stats about response times.
172	  Say Y if you want to enable IPC flood test.
173	  If unsure, select "N".
174
175config SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT
176	bool "SOF retain DSP context on any FW exceptions"
177	help
178	  This option keeps the DSP in D0 state so that firmware debug
179	  information can be retained and dumped to userspace.
180	  Say Y if you want to retain DSP context for FW exceptions.
181	  If unsure, select "N".
182
183endif ## SND_SOC_SOF_DEBUG
184
185endif ## SND_SOC_SOF_DEVELOPER_SUPPORT
186
187config SND_SOC_SOF
188	tristate
189	select SND_SOC_TOPOLOGY
190	select SND_SOC_SOF_NOCODEC if SND_SOC_SOF_NOCODEC_SUPPORT
191	help
192	  This option is not user-selectable but automagically handled by
193	  'select' statements at a higher level
194	  The selection is made at the top level and does not exactly follow
195	  module dependencies but since the module or built-in type is decided
196	  at the top level it doesn't matter.
197
198config SND_SOC_SOF_PROBE_WORK_QUEUE
199	bool
200	help
201	  This option is not user-selectable but automagically handled by
202	  'select' statements at a higher level
203	  When selected, the probe is handled in two steps, for example to
204	  avoid lockdeps if request_module is used in the probe.
205
206source "sound/soc/sof/imx/Kconfig"
207source "sound/soc/sof/intel/Kconfig"
208source "sound/soc/sof/xtensa/Kconfig"
209
210endif
211