1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // Speyside audio support 4 // 5 // Copyright 2011 Wolfson Microelectronics 6 7 #include <sound/soc.h> 8 #include <sound/soc-dapm.h> 9 #include <sound/jack.h> 10 #include <linux/gpio.h> 11 #include <linux/module.h> 12 13 #include "../codecs/wm8996.h" 14 #include "../codecs/wm9081.h" 15 16 #define WM8996_HPSEL_GPIO 214 17 #define MCLK_AUDIO_RATE (512 * 48000) 18 19 static int speyside_set_bias_level(struct snd_soc_card *card, 20 struct snd_soc_dapm_context *dapm, 21 enum snd_soc_bias_level level) 22 { 23 struct snd_soc_pcm_runtime *rtd; 24 struct snd_soc_dai *codec_dai; 25 int ret; 26 27 rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); 28 codec_dai = rtd->codec_dai; 29 30 if (dapm->dev != codec_dai->dev) 31 return 0; 32 33 switch (level) { 34 case SND_SOC_BIAS_STANDBY: 35 ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2, 36 32768, SND_SOC_CLOCK_IN); 37 if (ret < 0) 38 return ret; 39 40 ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2, 41 0, 0, 0); 42 if (ret < 0) { 43 pr_err("Failed to stop FLL\n"); 44 return ret; 45 } 46 break; 47 48 default: 49 break; 50 } 51 52 return 0; 53 } 54 55 static int speyside_set_bias_level_post(struct snd_soc_card *card, 56 struct snd_soc_dapm_context *dapm, 57 enum snd_soc_bias_level level) 58 { 59 struct snd_soc_pcm_runtime *rtd; 60 struct snd_soc_dai *codec_dai; 61 int ret; 62 63 rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); 64 codec_dai = rtd->codec_dai; 65 66 if (dapm->dev != codec_dai->dev) 67 return 0; 68 69 switch (level) { 70 case SND_SOC_BIAS_PREPARE: 71 if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) { 72 ret = snd_soc_dai_set_pll(codec_dai, 0, 73 WM8996_FLL_MCLK2, 74 32768, MCLK_AUDIO_RATE); 75 if (ret < 0) { 76 pr_err("Failed to start FLL\n"); 77 return ret; 78 } 79 80 ret = snd_soc_dai_set_sysclk(codec_dai, 81 WM8996_SYSCLK_FLL, 82 MCLK_AUDIO_RATE, 83 SND_SOC_CLOCK_IN); 84 if (ret < 0) 85 return ret; 86 } 87 break; 88 89 default: 90 break; 91 } 92 93 card->dapm.bias_level = level; 94 95 return 0; 96 } 97 98 static struct snd_soc_jack speyside_headset; 99 100 /* Headset jack detection DAPM pins */ 101 static struct snd_soc_jack_pin speyside_headset_pins[] = { 102 { 103 .pin = "Headset Mic", 104 .mask = SND_JACK_MICROPHONE, 105 }, 106 }; 107 108 /* Default the headphone selection to active high */ 109 static int speyside_jack_polarity; 110 111 static int speyside_get_micbias(struct snd_soc_dapm_widget *source, 112 struct snd_soc_dapm_widget *sink) 113 { 114 if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0)) 115 return 1; 116 if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0)) 117 return 1; 118 119 return 0; 120 } 121 122 static void speyside_set_polarity(struct snd_soc_component *component, 123 int polarity) 124 { 125 speyside_jack_polarity = !polarity; 126 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); 127 128 /* Re-run DAPM to make sure we're using the correct mic bias */ 129 snd_soc_dapm_sync(snd_soc_component_get_dapm(component)); 130 } 131 132 static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd) 133 { 134 struct snd_soc_dai *dai = rtd->codec_dai; 135 int ret; 136 137 ret = snd_soc_dai_set_sysclk(dai, 0, MCLK_AUDIO_RATE, 0); 138 if (ret < 0) 139 return ret; 140 141 return 0; 142 } 143 144 static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd) 145 { 146 struct snd_soc_dai *dai = rtd->codec_dai; 147 struct snd_soc_component *component = dai->component; 148 int ret; 149 150 ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0); 151 if (ret < 0) 152 return ret; 153 154 ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL"); 155 if (ret != 0) 156 pr_err("Failed to request HP_SEL GPIO: %d\n", ret); 157 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); 158 159 ret = snd_soc_card_jack_new(rtd->card, "Headset", SND_JACK_LINEOUT | 160 SND_JACK_HEADSET | SND_JACK_BTN_0, 161 &speyside_headset, speyside_headset_pins, 162 ARRAY_SIZE(speyside_headset_pins)); 163 if (ret) 164 return ret; 165 166 wm8996_detect(component, &speyside_headset, speyside_set_polarity); 167 168 return 0; 169 } 170 171 static int speyside_late_probe(struct snd_soc_card *card) 172 { 173 snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); 174 snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); 175 snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); 176 snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); 177 snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker"); 178 snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); 179 snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); 180 181 return 0; 182 } 183 184 static const struct snd_soc_pcm_stream dsp_codec_params = { 185 .formats = SNDRV_PCM_FMTBIT_S32_LE, 186 .rate_min = 48000, 187 .rate_max = 48000, 188 .channels_min = 2, 189 .channels_max = 2, 190 }; 191 192 SND_SOC_DAILINK_DEFS(cpu_dsp, 193 DAILINK_COMP_ARRAY(COMP_CPU("samsung-i2s.0")), 194 DAILINK_COMP_ARRAY(COMP_CODEC("spi0.0", "wm0010-sdi1")), 195 DAILINK_COMP_ARRAY(COMP_PLATFORM("samsung-i2s.0"))); 196 197 SND_SOC_DAILINK_DEFS(dsp_codec, 198 DAILINK_COMP_ARRAY(COMP_CPU("wm0010-sdi2")), 199 DAILINK_COMP_ARRAY(COMP_CODEC("wm8996.1-001a", "wm8996-aif1"))); 200 201 SND_SOC_DAILINK_DEFS(baseband, 202 DAILINK_COMP_ARRAY(COMP_CPU("wm8996-aif2")), 203 DAILINK_COMP_ARRAY(COMP_CODEC("wm1250-ev1.1-0027", "wm1250-ev1"))); 204 205 static struct snd_soc_dai_link speyside_dai[] = { 206 { 207 .name = "CPU-DSP", 208 .stream_name = "CPU-DSP", 209 .init = speyside_wm0010_init, 210 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF 211 | SND_SOC_DAIFMT_CBM_CFM, 212 SND_SOC_DAILINK_REG(cpu_dsp), 213 }, 214 { 215 .name = "DSP-CODEC", 216 .stream_name = "DSP-CODEC", 217 .init = speyside_wm8996_init, 218 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF 219 | SND_SOC_DAIFMT_CBM_CFM, 220 .params = &dsp_codec_params, 221 .ignore_suspend = 1, 222 SND_SOC_DAILINK_REG(dsp_codec), 223 }, 224 { 225 .name = "Baseband", 226 .stream_name = "Baseband", 227 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF 228 | SND_SOC_DAIFMT_CBM_CFM, 229 .ignore_suspend = 1, 230 SND_SOC_DAILINK_REG(baseband), 231 }, 232 }; 233 234 static int speyside_wm9081_init(struct snd_soc_component *component) 235 { 236 /* At any time the WM9081 is active it will have this clock */ 237 return snd_soc_component_set_sysclk(component, WM9081_SYSCLK_MCLK, 0, 238 MCLK_AUDIO_RATE, 0); 239 } 240 241 static struct snd_soc_aux_dev speyside_aux_dev[] = { 242 { 243 .dlc = COMP_AUX("wm9081.1-006c"), 244 .init = speyside_wm9081_init, 245 }, 246 }; 247 248 static struct snd_soc_codec_conf speyside_codec_conf[] = { 249 { 250 .dev_name = "wm9081.1-006c", 251 .name_prefix = "Sub", 252 }, 253 }; 254 255 static const struct snd_kcontrol_new controls[] = { 256 SOC_DAPM_PIN_SWITCH("Main Speaker"), 257 SOC_DAPM_PIN_SWITCH("Main DMIC"), 258 SOC_DAPM_PIN_SWITCH("Main AMIC"), 259 SOC_DAPM_PIN_SWITCH("WM1250 Input"), 260 SOC_DAPM_PIN_SWITCH("WM1250 Output"), 261 SOC_DAPM_PIN_SWITCH("Headphone"), 262 }; 263 264 static struct snd_soc_dapm_widget widgets[] = { 265 SND_SOC_DAPM_HP("Headphone", NULL), 266 SND_SOC_DAPM_MIC("Headset Mic", NULL), 267 268 SND_SOC_DAPM_SPK("Main Speaker", NULL), 269 270 SND_SOC_DAPM_MIC("Main AMIC", NULL), 271 SND_SOC_DAPM_MIC("Main DMIC", NULL), 272 }; 273 274 static struct snd_soc_dapm_route audio_paths[] = { 275 { "IN1RN", NULL, "MICB1" }, 276 { "IN1RP", NULL, "MICB1" }, 277 { "IN1RN", NULL, "MICB2" }, 278 { "IN1RP", NULL, "MICB2" }, 279 { "MICB1", NULL, "Headset Mic", speyside_get_micbias }, 280 { "MICB2", NULL, "Headset Mic", speyside_get_micbias }, 281 282 { "IN1LP", NULL, "MICB2" }, 283 { "IN1RN", NULL, "MICB1" }, 284 { "MICB2", NULL, "Main AMIC" }, 285 286 { "DMIC1DAT", NULL, "MICB1" }, 287 { "DMIC2DAT", NULL, "MICB1" }, 288 { "MICB1", NULL, "Main DMIC" }, 289 290 { "Headphone", NULL, "HPOUT1L" }, 291 { "Headphone", NULL, "HPOUT1R" }, 292 293 { "Sub IN1", NULL, "HPOUT2L" }, 294 { "Sub IN2", NULL, "HPOUT2R" }, 295 296 { "Main Speaker", NULL, "Sub SPKN" }, 297 { "Main Speaker", NULL, "Sub SPKP" }, 298 { "Main Speaker", NULL, "SPKDAT" }, 299 }; 300 301 static struct snd_soc_card speyside = { 302 .name = "Speyside", 303 .owner = THIS_MODULE, 304 .dai_link = speyside_dai, 305 .num_links = ARRAY_SIZE(speyside_dai), 306 .aux_dev = speyside_aux_dev, 307 .num_aux_devs = ARRAY_SIZE(speyside_aux_dev), 308 .codec_conf = speyside_codec_conf, 309 .num_configs = ARRAY_SIZE(speyside_codec_conf), 310 311 .set_bias_level = speyside_set_bias_level, 312 .set_bias_level_post = speyside_set_bias_level_post, 313 314 .controls = controls, 315 .num_controls = ARRAY_SIZE(controls), 316 .dapm_widgets = widgets, 317 .num_dapm_widgets = ARRAY_SIZE(widgets), 318 .dapm_routes = audio_paths, 319 .num_dapm_routes = ARRAY_SIZE(audio_paths), 320 .fully_routed = true, 321 322 .late_probe = speyside_late_probe, 323 }; 324 325 static int speyside_probe(struct platform_device *pdev) 326 { 327 struct snd_soc_card *card = &speyside; 328 int ret; 329 330 card->dev = &pdev->dev; 331 332 ret = devm_snd_soc_register_card(&pdev->dev, card); 333 if (ret) 334 dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", 335 ret); 336 337 return ret; 338 } 339 340 static struct platform_driver speyside_driver = { 341 .driver = { 342 .name = "speyside", 343 .pm = &snd_soc_pm_ops, 344 }, 345 .probe = speyside_probe, 346 }; 347 348 module_platform_driver(speyside_driver); 349 350 MODULE_DESCRIPTION("Speyside audio support"); 351 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); 352 MODULE_LICENSE("GPL"); 353 MODULE_ALIAS("platform:speyside"); 354