1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig SND_SOC_SAMSUNG 3 tristate "ASoC support for Samsung" 4 depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST 5 depends on COMMON_CLK 6 select SND_SOC_GENERIC_DMAENGINE_PCM 7 help 8 Say Y or M if you want to add support for codecs attached to 9 the Samsung SoCs' Audio interfaces. You will also need to 10 select the audio interfaces to support below. 11 12if SND_SOC_SAMSUNG 13 14config SND_S3C24XX_I2S 15 tristate 16 17config SND_S3C_I2SV2_SOC 18 tristate 19 20config SND_S3C2412_SOC_I2S 21 tristate 22 select SND_S3C_I2SV2_SOC 23 24config SND_SAMSUNG_PCM 25 tristate "Samsung PCM interface support" 26 27config SND_SAMSUNG_SPDIF 28 tristate "Samsung SPDIF transmitter support" 29 select SND_SOC_SPDIF 30 31config SND_SAMSUNG_I2S 32 tristate "Samsung I2S interface support" 33 34config SND_SOC_SAMSUNG_NEO1973_WM8753 35 tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)" 36 depends on MACH_NEO1973_GTA02 37 select SND_S3C24XX_I2S 38 select SND_SOC_WM8753 39 select SND_SOC_BT_SCO 40 help 41 Say Y here to enable audio support for the Openmoko Neo1973 42 Smartphones. 43 44config SND_SOC_SAMSUNG_JIVE_WM8750 45 tristate "SoC I2S Audio support for Jive" 46 depends on MACH_JIVE && I2C 47 select SND_SOC_WM8750 48 select SND_S3C2412_SOC_I2S 49 help 50 Say Y if you want to add support for SoC audio on the Jive. 51 52config SND_SOC_SAMSUNG_SMDK_WM8580 53 tristate "SoC I2S Audio support for WM8580 on SMDK" 54 depends on MACH_SMDK6410 || COMPILE_TEST 55 depends on I2C 56 select SND_SOC_WM8580 57 select SND_SAMSUNG_I2S 58 help 59 Say Y if you want to add support for SoC audio on the SMDKs. 60 61config SND_SOC_SAMSUNG_SMDK_WM8994 62 tristate "SoC I2S Audio support for WM8994 on SMDK" 63 depends on I2C=y 64 select MFD_WM8994 65 select SND_SOC_WM8994 66 select SND_SAMSUNG_I2S 67 help 68 Say Y if you want to add support for SoC audio on the SMDKs. 69 70config SND_SOC_SAMSUNG_S3C24XX_UDA134X 71 tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" 72 depends on ARCH_S3C24XX 73 select SND_S3C24XX_I2S 74 select SND_SOC_L3 75 select SND_SOC_UDA134X 76 77config SND_SOC_SAMSUNG_SIMTEC 78 tristate 79 help 80 Internal node for common S3C24XX/Simtec support. 81 82config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 83 tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" 84 depends on ARCH_S3C24XX && I2C 85 select SND_S3C24XX_I2S 86 select SND_SOC_TLV320AIC23_I2C 87 select SND_SOC_SAMSUNG_SIMTEC 88 89config SND_SOC_SAMSUNG_SIMTEC_HERMES 90 tristate "SoC I2S Audio support for Simtec Hermes board" 91 depends on ARCH_S3C24XX && I2C 92 select SND_S3C24XX_I2S 93 select SND_SOC_TLV320AIC3X 94 select SND_SOC_SAMSUNG_SIMTEC 95 96config SND_SOC_SAMSUNG_H1940_UDA1380 97 tristate "Audio support for the HP iPAQ H1940" 98 depends on ARCH_H1940 && I2C 99 select SND_S3C24XX_I2S 100 select SND_SOC_UDA1380 101 help 102 This driver provides audio support for HP iPAQ h1940 PDA. 103 104config SND_SOC_SAMSUNG_RX1950_UDA1380 105 tristate "Audio support for the HP iPAQ RX1950" 106 depends on MACH_RX1950 && I2C 107 select SND_S3C24XX_I2S 108 select SND_SOC_UDA1380 109 help 110 This driver provides audio support for HP iPAQ RX1950 PDA. 111 112config SND_SOC_SMARTQ 113 tristate "SoC I2S Audio support for SmartQ board" 114 depends on MACH_SMARTQ || COMPILE_TEST 115 depends on GPIOLIB || COMPILE_TEST 116 depends on I2C 117 select SND_SAMSUNG_I2S 118 select SND_SOC_WM8750 119 120config SND_SOC_SAMSUNG_SMDK_SPDIF 121 tristate "SoC S/PDIF Audio support for SMDK" 122 select SND_SAMSUNG_SPDIF 123 help 124 Say Y if you want to add support for SoC S/PDIF audio on the SMDK. 125 126config SND_SOC_SMDK_WM8994_PCM 127 tristate "SoC PCM Audio support for WM8994 on SMDK" 128 depends on I2C=y 129 select MFD_WM8994 130 select SND_SOC_WM8994 131 select SND_SAMSUNG_PCM 132 help 133 Say Y if you want to add support for SoC audio on the SMDK 134 135config SND_SOC_SPEYSIDE 136 tristate "Audio support for Wolfson Speyside" 137 depends on I2C && SPI_MASTER 138 depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST 139 select SND_SAMSUNG_I2S 140 select SND_SOC_WM8996 141 select SND_SOC_WM9081 142 select SND_SOC_WM0010 143 select SND_SOC_WM1250_EV1 144 145config SND_SOC_TOBERMORY 146 tristate "Audio support for Wolfson Tobermory" 147 depends on INPUT && I2C 148 depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST 149 select SND_SAMSUNG_I2S 150 select SND_SOC_WM8962 151 152config SND_SOC_BELLS 153 tristate "Audio support for Wolfson Bells" 154 depends on MFD_ARIZONA && MFD_WM5102 && MFD_WM5110 && I2C && SPI_MASTER 155 depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST 156 select SND_SAMSUNG_I2S 157 select SND_SOC_WM5102 158 select SND_SOC_WM5110 159 select SND_SOC_WM9081 160 select SND_SOC_WM0010 161 select SND_SOC_WM1250_EV1 162 163config SND_SOC_LOWLAND 164 tristate "Audio support for Wolfson Lowland" 165 depends on I2C 166 depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST 167 select SND_SAMSUNG_I2S 168 select SND_SOC_WM5100 169 select SND_SOC_WM9081 170 171config SND_SOC_LITTLEMILL 172 tristate "Audio support for Wolfson Littlemill" 173 depends on I2C 174 depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST 175 select SND_SAMSUNG_I2S 176 select MFD_WM8994 177 select SND_SOC_WM8994 178 179config SND_SOC_SNOW 180 tristate "Audio support for Google Snow boards" 181 depends on I2C 182 select SND_SOC_MAX98090 183 select SND_SOC_MAX98095 184 select SND_SAMSUNG_I2S 185 help 186 Say Y if you want to add audio support for various Snow 187 boards based on Exynos5 series of SoCs. 188 189config SND_SOC_ODROID 190 tristate "Audio support for Odroid XU3/XU4" 191 depends on SND_SOC_SAMSUNG && I2C 192 select SND_SOC_MAX98090 193 select SND_SAMSUNG_I2S 194 help 195 Say Y here to enable audio support for the Odroid XU3/XU4. 196 197config SND_SOC_ARNDALE 198 tristate "Audio support for Arndale Board" 199 depends on I2C 200 select SND_SAMSUNG_I2S 201 select SND_SOC_RT5631 202 select MFD_WM8994 203 select SND_SOC_WM8994 204 205config SND_SOC_SAMSUNG_TM2_WM5110 206 tristate "SoC I2S Audio support for WM5110 on TM2 board" 207 depends on SND_SOC_SAMSUNG && MFD_ARIZONA && MFD_WM5110 && I2C && SPI_MASTER 208 depends on GPIOLIB || COMPILE_TEST 209 select SND_SOC_MAX98504 210 select SND_SOC_WM5110 211 select SND_SAMSUNG_I2S 212 help 213 Say Y if you want to add support for SoC audio on the TM2 board. 214 215config SND_SOC_SAMSUNG_ARIES_WM8994 216 tristate "SoC I2S Audio support for WM8994 on Aries" 217 depends on SND_SOC_SAMSUNG && MFD_WM8994 && IIO && EXTCON 218 select SND_SOC_BT_SCO 219 select SND_SOC_WM8994 220 select SND_SAMSUNG_I2S 221 help 222 Say Y if you want to add support for SoC audio on Aries boards, 223 which has a WM8994 codec connected to a BT codec, a cellular 224 modem, and the Samsung I2S controller. Jack detection is done 225 via ADC, GPIOs, and an extcon device. Switching between the Mic 226 and TV-Out path is also handled. 227 228config SND_SOC_SAMSUNG_MIDAS_WM1811 229 tristate "SoC I2S Audio support for Midas boards" 230 depends on SND_SOC_SAMSUNG 231 select SND_SAMSUNG_I2S 232 select SND_SOC_WM8994 233 help 234 Say Y if you want to add support for SoC audio on the Midas boards. 235 236endif #SND_SOC_SAMSUNG 237