xref: /openbmc/linux/sound/soc/samsung/Kconfig (revision ba61bb17)
1menuconfig SND_SOC_SAMSUNG
2	tristate "ASoC support for Samsung"
3	depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
4	depends on COMMON_CLK
5	select SND_SOC_GENERIC_DMAENGINE_PCM
6	---help---
7	  Say Y or M if you want to add support for codecs attached to
8	  the Samsung SoCs' Audio interfaces. You will also need to
9	  select the audio interfaces to support below.
10
11if SND_SOC_SAMSUNG
12
13config SND_S3C24XX_I2S
14	tristate
15
16config SND_S3C_I2SV2_SOC
17	tristate
18
19config SND_S3C2412_SOC_I2S
20	tristate
21	select SND_S3C_I2SV2_SOC
22
23config SND_SAMSUNG_PCM
24	tristate "Samsung PCM interface support"
25
26config SND_SAMSUNG_SPDIF
27	tristate "Samsung SPDIF transmitter support"
28	select SND_SOC_SPDIF
29
30config SND_SAMSUNG_I2S
31	tristate "Samsung I2S interface support"
32
33config SND_SOC_SAMSUNG_NEO1973_WM8753
34	tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
35	depends on MACH_NEO1973_GTA02
36	select SND_S3C24XX_I2S
37	select SND_SOC_WM8753
38	select SND_SOC_BT_SCO
39	help
40	  Say Y here to enable audio support for the Openmoko Neo1973
41	  Smartphones.
42
43config SND_SOC_SAMSUNG_JIVE_WM8750
44	tristate "SoC I2S Audio support for Jive"
45	depends on MACH_JIVE && I2C
46	select SND_SOC_WM8750
47	select SND_S3C2412_SOC_I2S
48	help
49	  Say Y if you want to add support for SoC audio on the Jive.
50
51config SND_SOC_SAMSUNG_SMDK_WM8580
52	tristate "SoC I2S Audio support for WM8580 on SMDK"
53	depends on MACH_SMDK6410 || COMPILE_TEST
54	depends on I2C
55	select SND_SOC_WM8580
56	select SND_SAMSUNG_I2S
57	help
58	  Say Y if you want to add support for SoC audio on the SMDKs.
59
60config SND_SOC_SAMSUNG_SMDK_WM8994
61	tristate "SoC I2S Audio support for WM8994 on SMDK"
62	depends on I2C=y
63	select MFD_WM8994
64	select SND_SOC_WM8994
65	select SND_SAMSUNG_I2S
66	help
67		Say Y if you want to add support for SoC audio on the SMDKs.
68
69config SND_SOC_SAMSUNG_S3C24XX_UDA134X
70	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
71	depends on ARCH_S3C24XX
72	select SND_S3C24XX_I2S
73	select SND_SOC_L3
74	select SND_SOC_UDA134X
75
76config SND_SOC_SAMSUNG_SIMTEC
77	tristate
78	help
79	  Internal node for common S3C24XX/Simtec suppor
80
81config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
82	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
83	depends on ARCH_S3C24XX && I2C
84	select SND_S3C24XX_I2S
85	select SND_SOC_TLV320AIC23_I2C
86	select SND_SOC_SAMSUNG_SIMTEC
87
88config SND_SOC_SAMSUNG_SIMTEC_HERMES
89	tristate "SoC I2S Audio support for Simtec Hermes board"
90	depends on ARCH_S3C24XX && I2C
91	select SND_S3C24XX_I2S
92	select SND_SOC_TLV320AIC3X
93	select SND_SOC_SAMSUNG_SIMTEC
94
95config SND_SOC_SAMSUNG_H1940_UDA1380
96	tristate "Audio support for the HP iPAQ H1940"
97	depends on ARCH_H1940 && I2C
98	select SND_S3C24XX_I2S
99	select SND_SOC_UDA1380
100	help
101	  This driver provides audio support for HP iPAQ h1940 PDA.
102
103config SND_SOC_SAMSUNG_RX1950_UDA1380
104	tristate "Audio support for the HP iPAQ RX1950"
105	depends on MACH_RX1950 && I2C
106	select SND_S3C24XX_I2S
107	select SND_SOC_UDA1380
108	help
109	  This driver provides audio support for HP iPAQ RX1950 PDA.
110
111config SND_SOC_SMARTQ
112	tristate "SoC I2S Audio support for SmartQ board"
113	depends on MACH_SMARTQ || COMPILE_TEST
114	depends on GPIOLIB || COMPILE_TEST
115	depends on I2C
116	select SND_SAMSUNG_I2S
117	select SND_SOC_WM8750
118
119config SND_SOC_SAMSUNG_SMDK_SPDIF
120	tristate "SoC S/PDIF Audio support for SMDK"
121	select SND_SAMSUNG_SPDIF
122	help
123	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
124
125config SND_SOC_SMDK_WM8994_PCM
126	tristate "SoC PCM Audio support for WM8994 on SMDK"
127	depends on I2C=y
128	select MFD_WM8994
129	select SND_SOC_WM8994
130	select SND_SAMSUNG_PCM
131	help
132	  Say Y if you want to add support for SoC audio on the SMDK
133
134config SND_SOC_SPEYSIDE
135	tristate "Audio support for Wolfson Speyside"
136	depends on I2C && SPI_MASTER
137	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
138	select SND_SAMSUNG_I2S
139	select SND_SOC_WM8996
140	select SND_SOC_WM9081
141	select SND_SOC_WM0010
142	select SND_SOC_WM1250_EV1
143
144config SND_SOC_TOBERMORY
145	tristate "Audio support for Wolfson Tobermory"
146	depends on INPUT && I2C
147	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
148	select SND_SAMSUNG_I2S
149	select SND_SOC_WM8962
150
151config SND_SOC_BELLS
152	tristate "Audio support for Wolfson Bells"
153	depends on MFD_ARIZONA && I2C && SPI_MASTER
154	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
155	select SND_SAMSUNG_I2S
156	select SND_SOC_WM5102
157	select SND_SOC_WM5110
158	select SND_SOC_WM9081
159	select SND_SOC_WM0010
160	select SND_SOC_WM1250_EV1
161
162config SND_SOC_LOWLAND
163	tristate "Audio support for Wolfson Lowland"
164	depends on I2C
165	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
166	select SND_SAMSUNG_I2S
167	select SND_SOC_WM5100
168	select SND_SOC_WM9081
169
170config SND_SOC_LITTLEMILL
171	tristate "Audio support for Wolfson Littlemill"
172	depends on I2C
173	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
174	select SND_SAMSUNG_I2S
175	select MFD_WM8994
176	select SND_SOC_WM8994
177
178config SND_SOC_SNOW
179	tristate "Audio support for Google Snow boards"
180	depends on I2C
181	select SND_SOC_MAX98090
182	select SND_SOC_MAX98095
183	select SND_SAMSUNG_I2S
184	help
185	  Say Y if you want to add audio support for various Snow
186	  boards based on Exynos5 series of SoCs.
187
188config SND_SOC_ODROID
189	tristate "Audio support for Odroid XU3/XU4"
190	depends on SND_SOC_SAMSUNG && I2C
191	select SND_SOC_MAX98090
192	select SND_SAMSUNG_I2S
193	help
194	  Say Y here to enable audio support for the Odroid XU3/XU4.
195
196config SND_SOC_ARNDALE_RT5631_ALC5631
197        tristate "Audio support for RT5631(ALC5631) on Arndale Board"
198        depends on I2C
199        select SND_SAMSUNG_I2S
200        select SND_SOC_RT5631
201
202config SND_SOC_SAMSUNG_TM2_WM5110
203	tristate "SoC I2S Audio support for WM5110 on TM2 board"
204	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
205	depends on GPIOLIB || COMPILE_TEST
206	select SND_SOC_MAX98504
207	select SND_SOC_WM5110
208	select SND_SAMSUNG_I2S
209	help
210	  Say Y if you want to add support for SoC audio on the TM2 board.
211
212endif #SND_SOC_SAMSUNG
213