1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * skl-message.c - HDA DSP interface for FW registration, Pipe and Module 4 * configurations 5 * 6 * Copyright (C) 2015 Intel Corp 7 * Author:Rafal Redzimski <rafal.f.redzimski@intel.com> 8 * Jeeja KP <jeeja.kp@intel.com> 9 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 10 */ 11 12 #include <linux/slab.h> 13 #include <linux/pci.h> 14 #include <sound/core.h> 15 #include <sound/pcm.h> 16 #include <uapi/sound/skl-tplg-interface.h> 17 #include "skl-sst-dsp.h" 18 #include "cnl-sst-dsp.h" 19 #include "skl-sst-ipc.h" 20 #include "skl.h" 21 #include "../common/sst-dsp.h" 22 #include "../common/sst-dsp-priv.h" 23 #include "skl-topology.h" 24 25 static int skl_alloc_dma_buf(struct device *dev, 26 struct snd_dma_buffer *dmab, size_t size) 27 { 28 return snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size, dmab); 29 } 30 31 static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab) 32 { 33 snd_dma_free_pages(dmab); 34 return 0; 35 } 36 37 #define SKL_ASTATE_PARAM_ID 4 38 39 void skl_dsp_set_astate_cfg(struct skl_dev *skl, u32 cnt, void *data) 40 { 41 struct skl_ipc_large_config_msg msg = {0}; 42 43 msg.large_param_id = SKL_ASTATE_PARAM_ID; 44 msg.param_data_size = (cnt * sizeof(struct skl_astate_param) + 45 sizeof(cnt)); 46 47 skl_ipc_set_large_config(&skl->ipc, &msg, data); 48 } 49 50 static int skl_dsp_setup_spib(struct device *dev, unsigned int size, 51 int stream_tag, int enable) 52 { 53 struct hdac_bus *bus = dev_get_drvdata(dev); 54 struct hdac_stream *stream = snd_hdac_get_stream(bus, 55 SNDRV_PCM_STREAM_PLAYBACK, stream_tag); 56 57 if (!stream) 58 return -EINVAL; 59 60 /* enable/disable SPIB for this hdac stream */ 61 snd_hdac_stream_spbcap_enable(bus, enable, stream->index); 62 63 /* set the spib value */ 64 snd_hdac_stream_set_spib(bus, stream, size); 65 66 return 0; 67 } 68 69 static int skl_dsp_prepare(struct device *dev, unsigned int format, 70 unsigned int size, struct snd_dma_buffer *dmab) 71 { 72 struct hdac_bus *bus = dev_get_drvdata(dev); 73 struct hdac_ext_stream *estream; 74 struct hdac_stream *stream; 75 struct snd_pcm_substream substream; 76 int ret; 77 78 if (!bus) 79 return -ENODEV; 80 81 memset(&substream, 0, sizeof(substream)); 82 substream.stream = SNDRV_PCM_STREAM_PLAYBACK; 83 84 estream = snd_hdac_ext_stream_assign(bus, &substream, 85 HDAC_EXT_STREAM_TYPE_HOST); 86 if (!estream) 87 return -ENODEV; 88 89 stream = hdac_stream(estream); 90 91 /* assign decouple host dma channel */ 92 ret = snd_hdac_dsp_prepare(stream, format, size, dmab); 93 if (ret < 0) 94 return ret; 95 96 skl_dsp_setup_spib(dev, size, stream->stream_tag, true); 97 98 return stream->stream_tag; 99 } 100 101 static int skl_dsp_trigger(struct device *dev, bool start, int stream_tag) 102 { 103 struct hdac_bus *bus = dev_get_drvdata(dev); 104 struct hdac_stream *stream; 105 106 if (!bus) 107 return -ENODEV; 108 109 stream = snd_hdac_get_stream(bus, 110 SNDRV_PCM_STREAM_PLAYBACK, stream_tag); 111 if (!stream) 112 return -EINVAL; 113 114 snd_hdac_dsp_trigger(stream, start); 115 116 return 0; 117 } 118 119 static int skl_dsp_cleanup(struct device *dev, 120 struct snd_dma_buffer *dmab, int stream_tag) 121 { 122 struct hdac_bus *bus = dev_get_drvdata(dev); 123 struct hdac_stream *stream; 124 struct hdac_ext_stream *estream; 125 126 if (!bus) 127 return -ENODEV; 128 129 stream = snd_hdac_get_stream(bus, 130 SNDRV_PCM_STREAM_PLAYBACK, stream_tag); 131 if (!stream) 132 return -EINVAL; 133 134 estream = stream_to_hdac_ext_stream(stream); 135 skl_dsp_setup_spib(dev, 0, stream_tag, false); 136 snd_hdac_ext_stream_release(estream, HDAC_EXT_STREAM_TYPE_HOST); 137 138 snd_hdac_dsp_cleanup(stream, dmab); 139 140 return 0; 141 } 142 143 static struct skl_dsp_loader_ops skl_get_loader_ops(void) 144 { 145 struct skl_dsp_loader_ops loader_ops; 146 147 memset(&loader_ops, 0, sizeof(struct skl_dsp_loader_ops)); 148 149 loader_ops.alloc_dma_buf = skl_alloc_dma_buf; 150 loader_ops.free_dma_buf = skl_free_dma_buf; 151 152 return loader_ops; 153 }; 154 155 static struct skl_dsp_loader_ops bxt_get_loader_ops(void) 156 { 157 struct skl_dsp_loader_ops loader_ops; 158 159 memset(&loader_ops, 0, sizeof(loader_ops)); 160 161 loader_ops.alloc_dma_buf = skl_alloc_dma_buf; 162 loader_ops.free_dma_buf = skl_free_dma_buf; 163 loader_ops.prepare = skl_dsp_prepare; 164 loader_ops.trigger = skl_dsp_trigger; 165 loader_ops.cleanup = skl_dsp_cleanup; 166 167 return loader_ops; 168 }; 169 170 static const struct skl_dsp_ops dsp_ops[] = { 171 { 172 .id = 0x9d70, 173 .num_cores = 2, 174 .loader_ops = skl_get_loader_ops, 175 .init = skl_sst_dsp_init, 176 .init_fw = skl_sst_init_fw, 177 .cleanup = skl_sst_dsp_cleanup 178 }, 179 { 180 .id = 0x9d71, 181 .num_cores = 2, 182 .loader_ops = skl_get_loader_ops, 183 .init = skl_sst_dsp_init, 184 .init_fw = skl_sst_init_fw, 185 .cleanup = skl_sst_dsp_cleanup 186 }, 187 { 188 .id = 0x5a98, 189 .num_cores = 2, 190 .loader_ops = bxt_get_loader_ops, 191 .init = bxt_sst_dsp_init, 192 .init_fw = bxt_sst_init_fw, 193 .cleanup = bxt_sst_dsp_cleanup 194 }, 195 { 196 .id = 0x3198, 197 .num_cores = 2, 198 .loader_ops = bxt_get_loader_ops, 199 .init = bxt_sst_dsp_init, 200 .init_fw = bxt_sst_init_fw, 201 .cleanup = bxt_sst_dsp_cleanup 202 }, 203 { 204 .id = 0x9dc8, 205 .num_cores = 4, 206 .loader_ops = bxt_get_loader_ops, 207 .init = cnl_sst_dsp_init, 208 .init_fw = cnl_sst_init_fw, 209 .cleanup = cnl_sst_dsp_cleanup 210 }, 211 { 212 .id = 0xa348, 213 .num_cores = 4, 214 .loader_ops = bxt_get_loader_ops, 215 .init = cnl_sst_dsp_init, 216 .init_fw = cnl_sst_init_fw, 217 .cleanup = cnl_sst_dsp_cleanup 218 }, 219 { 220 .id = 0x02c8, 221 .num_cores = 4, 222 .loader_ops = bxt_get_loader_ops, 223 .init = cnl_sst_dsp_init, 224 .init_fw = cnl_sst_init_fw, 225 .cleanup = cnl_sst_dsp_cleanup 226 }, 227 { 228 .id = 0x06c8, 229 .num_cores = 4, 230 .loader_ops = bxt_get_loader_ops, 231 .init = cnl_sst_dsp_init, 232 .init_fw = cnl_sst_init_fw, 233 .cleanup = cnl_sst_dsp_cleanup 234 }, 235 }; 236 237 const struct skl_dsp_ops *skl_get_dsp_ops(int pci_id) 238 { 239 int i; 240 241 for (i = 0; i < ARRAY_SIZE(dsp_ops); i++) { 242 if (dsp_ops[i].id == pci_id) 243 return &dsp_ops[i]; 244 } 245 246 return NULL; 247 } 248 249 int skl_init_dsp(struct skl_dev *skl) 250 { 251 void __iomem *mmio_base; 252 struct hdac_bus *bus = skl_to_bus(skl); 253 struct skl_dsp_loader_ops loader_ops; 254 int irq = bus->irq; 255 const struct skl_dsp_ops *ops; 256 struct skl_dsp_cores *cores; 257 int ret; 258 259 /* enable ppcap interrupt */ 260 snd_hdac_ext_bus_ppcap_enable(bus, true); 261 snd_hdac_ext_bus_ppcap_int_enable(bus, true); 262 263 /* read the BAR of the ADSP MMIO */ 264 mmio_base = pci_ioremap_bar(skl->pci, 4); 265 if (mmio_base == NULL) { 266 dev_err(bus->dev, "ioremap error\n"); 267 return -ENXIO; 268 } 269 270 ops = skl_get_dsp_ops(skl->pci->device); 271 if (!ops) { 272 ret = -EIO; 273 goto unmap_mmio; 274 } 275 276 loader_ops = ops->loader_ops(); 277 ret = ops->init(bus->dev, mmio_base, irq, 278 skl->fw_name, loader_ops, 279 &skl); 280 281 if (ret < 0) 282 goto unmap_mmio; 283 284 skl->dsp_ops = ops; 285 cores = &skl->cores; 286 cores->count = ops->num_cores; 287 288 cores->state = kcalloc(cores->count, sizeof(*cores->state), GFP_KERNEL); 289 if (!cores->state) { 290 ret = -ENOMEM; 291 goto unmap_mmio; 292 } 293 294 cores->usage_count = kcalloc(cores->count, sizeof(*cores->usage_count), 295 GFP_KERNEL); 296 if (!cores->usage_count) { 297 ret = -ENOMEM; 298 goto free_core_state; 299 } 300 301 dev_dbg(bus->dev, "dsp registration status=%d\n", ret); 302 303 return 0; 304 305 free_core_state: 306 kfree(cores->state); 307 308 unmap_mmio: 309 iounmap(mmio_base); 310 311 return ret; 312 } 313 314 int skl_free_dsp(struct skl_dev *skl) 315 { 316 struct hdac_bus *bus = skl_to_bus(skl); 317 318 /* disable ppcap interrupt */ 319 snd_hdac_ext_bus_ppcap_int_enable(bus, false); 320 321 skl->dsp_ops->cleanup(bus->dev, skl); 322 323 kfree(skl->cores.state); 324 kfree(skl->cores.usage_count); 325 326 if (skl->dsp->addr.lpe) 327 iounmap(skl->dsp->addr.lpe); 328 329 return 0; 330 } 331 332 /* 333 * In the case of "suspend_active" i.e, the Audio IP being active 334 * during system suspend, immediately excecute any pending D0i3 work 335 * before suspending. This is needed for the IP to work in low power 336 * mode during system suspend. In the case of normal suspend, cancel 337 * any pending D0i3 work. 338 */ 339 int skl_suspend_late_dsp(struct skl_dev *skl) 340 { 341 struct delayed_work *dwork; 342 343 if (!skl) 344 return 0; 345 346 dwork = &skl->d0i3.work; 347 348 if (dwork->work.func) { 349 if (skl->supend_active) 350 flush_delayed_work(dwork); 351 else 352 cancel_delayed_work_sync(dwork); 353 } 354 355 return 0; 356 } 357 358 int skl_suspend_dsp(struct skl_dev *skl) 359 { 360 struct hdac_bus *bus = skl_to_bus(skl); 361 int ret; 362 363 /* if ppcap is not supported return 0 */ 364 if (!bus->ppcap) 365 return 0; 366 367 ret = skl_dsp_sleep(skl->dsp); 368 if (ret < 0) 369 return ret; 370 371 /* disable ppcap interrupt */ 372 snd_hdac_ext_bus_ppcap_int_enable(bus, false); 373 snd_hdac_ext_bus_ppcap_enable(bus, false); 374 375 return 0; 376 } 377 378 int skl_resume_dsp(struct skl_dev *skl) 379 { 380 struct hdac_bus *bus = skl_to_bus(skl); 381 int ret; 382 383 /* if ppcap is not supported return 0 */ 384 if (!bus->ppcap) 385 return 0; 386 387 /* enable ppcap interrupt */ 388 snd_hdac_ext_bus_ppcap_enable(bus, true); 389 snd_hdac_ext_bus_ppcap_int_enable(bus, true); 390 391 /* check if DSP 1st boot is done */ 392 if (skl->is_first_boot) 393 return 0; 394 395 /* 396 * Disable dynamic clock and power gating during firmware 397 * and library download 398 */ 399 skl->enable_miscbdcge(skl->dev, false); 400 skl->clock_power_gating(skl->dev, false); 401 402 ret = skl_dsp_wake(skl->dsp); 403 skl->enable_miscbdcge(skl->dev, true); 404 skl->clock_power_gating(skl->dev, true); 405 if (ret < 0) 406 return ret; 407 408 if (skl->cfg.astate_cfg != NULL) { 409 skl_dsp_set_astate_cfg(skl, skl->cfg.astate_cfg->count, 410 skl->cfg.astate_cfg); 411 } 412 return ret; 413 } 414 415 enum skl_bitdepth skl_get_bit_depth(int params) 416 { 417 switch (params) { 418 case 8: 419 return SKL_DEPTH_8BIT; 420 421 case 16: 422 return SKL_DEPTH_16BIT; 423 424 case 24: 425 return SKL_DEPTH_24BIT; 426 427 case 32: 428 return SKL_DEPTH_32BIT; 429 430 default: 431 return SKL_DEPTH_INVALID; 432 433 } 434 } 435 436 /* 437 * Each module in DSP expects a base module configuration, which consists of 438 * PCM format information, which we calculate in driver and resource values 439 * which are read from widget information passed through topology binary 440 * This is send when we create a module with INIT_INSTANCE IPC msg 441 */ 442 static void skl_set_base_module_format(struct skl_dev *skl, 443 struct skl_module_cfg *mconfig, 444 struct skl_base_cfg *base_cfg) 445 { 446 struct skl_module *module = mconfig->module; 447 struct skl_module_res *res = &module->resources[mconfig->res_idx]; 448 struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx]; 449 struct skl_module_fmt *format = &fmt->inputs[0].fmt; 450 451 base_cfg->audio_fmt.number_of_channels = format->channels; 452 453 base_cfg->audio_fmt.s_freq = format->s_freq; 454 base_cfg->audio_fmt.bit_depth = format->bit_depth; 455 base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth; 456 base_cfg->audio_fmt.ch_cfg = format->ch_cfg; 457 base_cfg->audio_fmt.sample_type = format->sample_type; 458 459 dev_dbg(skl->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n", 460 format->bit_depth, format->valid_bit_depth, 461 format->ch_cfg); 462 463 base_cfg->audio_fmt.channel_map = format->ch_map; 464 465 base_cfg->audio_fmt.interleaving = format->interleaving_style; 466 467 base_cfg->cpc = res->cpc; 468 base_cfg->ibs = res->ibs; 469 base_cfg->obs = res->obs; 470 base_cfg->is_pages = res->is_pages; 471 } 472 473 static void fill_pin_params(struct skl_audio_data_format *pin_fmt, 474 struct skl_module_fmt *format) 475 { 476 pin_fmt->number_of_channels = format->channels; 477 pin_fmt->s_freq = format->s_freq; 478 pin_fmt->bit_depth = format->bit_depth; 479 pin_fmt->valid_bit_depth = format->valid_bit_depth; 480 pin_fmt->ch_cfg = format->ch_cfg; 481 pin_fmt->sample_type = format->sample_type; 482 pin_fmt->channel_map = format->ch_map; 483 pin_fmt->interleaving = format->interleaving_style; 484 } 485 486 /* 487 * Any module configuration begins with a base module configuration but 488 * can be followed by a generic extension containing audio format for all 489 * module's pins that are in use. 490 */ 491 static void skl_set_base_ext_module_format(struct skl_dev *skl, 492 struct skl_module_cfg *mconfig, 493 struct skl_base_cfg_ext *base_cfg_ext) 494 { 495 struct skl_module *module = mconfig->module; 496 struct skl_module_pin_resources *pin_res; 497 struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx]; 498 struct skl_module_res *res = &module->resources[mconfig->res_idx]; 499 struct skl_module_fmt *format; 500 struct skl_pin_format *pin_fmt; 501 char *params; 502 int i; 503 504 base_cfg_ext->nr_input_pins = res->nr_input_pins; 505 base_cfg_ext->nr_output_pins = res->nr_output_pins; 506 base_cfg_ext->priv_param_length = 507 mconfig->formats_config[SKL_PARAM_INIT].caps_size; 508 509 for (i = 0; i < res->nr_input_pins; i++) { 510 pin_res = &res->input[i]; 511 pin_fmt = &base_cfg_ext->pins_fmt[i]; 512 513 pin_fmt->pin_idx = pin_res->pin_index; 514 pin_fmt->buf_size = pin_res->buf_size; 515 516 format = &fmt->inputs[pin_res->pin_index].fmt; 517 fill_pin_params(&pin_fmt->audio_fmt, format); 518 } 519 520 for (i = 0; i < res->nr_output_pins; i++) { 521 pin_res = &res->output[i]; 522 pin_fmt = &base_cfg_ext->pins_fmt[res->nr_input_pins + i]; 523 524 pin_fmt->pin_idx = pin_res->pin_index; 525 pin_fmt->buf_size = pin_res->buf_size; 526 527 format = &fmt->outputs[pin_res->pin_index].fmt; 528 fill_pin_params(&pin_fmt->audio_fmt, format); 529 } 530 531 if (!base_cfg_ext->priv_param_length) 532 return; 533 534 params = (char *)base_cfg_ext + sizeof(struct skl_base_cfg_ext); 535 params += (base_cfg_ext->nr_input_pins + base_cfg_ext->nr_output_pins) * 536 sizeof(struct skl_pin_format); 537 538 memcpy(params, mconfig->formats_config[SKL_PARAM_INIT].caps, 539 mconfig->formats_config[SKL_PARAM_INIT].caps_size); 540 } 541 542 /* 543 * Copies copier capabilities into copier module and updates copier module 544 * config size. 545 */ 546 static void skl_copy_copier_caps(struct skl_module_cfg *mconfig, 547 struct skl_cpr_cfg *cpr_mconfig) 548 { 549 if (mconfig->formats_config[SKL_PARAM_INIT].caps_size == 0) 550 return; 551 552 memcpy(cpr_mconfig->gtw_cfg.config_data, 553 mconfig->formats_config[SKL_PARAM_INIT].caps, 554 mconfig->formats_config[SKL_PARAM_INIT].caps_size); 555 556 cpr_mconfig->gtw_cfg.config_length = 557 (mconfig->formats_config[SKL_PARAM_INIT].caps_size) / 4; 558 } 559 560 #define SKL_NON_GATEWAY_CPR_NODE_ID 0xFFFFFFFF 561 /* 562 * Calculate the gatewat settings required for copier module, type of 563 * gateway and index of gateway to use 564 */ 565 static u32 skl_get_node_id(struct skl_dev *skl, 566 struct skl_module_cfg *mconfig) 567 { 568 union skl_connector_node_id node_id = {0}; 569 union skl_ssp_dma_node ssp_node = {0}; 570 struct skl_pipe_params *params = mconfig->pipe->p_params; 571 572 switch (mconfig->dev_type) { 573 case SKL_DEVICE_BT: 574 node_id.node.dma_type = 575 (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? 576 SKL_DMA_I2S_LINK_OUTPUT_CLASS : 577 SKL_DMA_I2S_LINK_INPUT_CLASS; 578 node_id.node.vindex = params->host_dma_id + 579 (mconfig->vbus_id << 3); 580 break; 581 582 case SKL_DEVICE_I2S: 583 node_id.node.dma_type = 584 (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? 585 SKL_DMA_I2S_LINK_OUTPUT_CLASS : 586 SKL_DMA_I2S_LINK_INPUT_CLASS; 587 ssp_node.dma_node.time_slot_index = mconfig->time_slot; 588 ssp_node.dma_node.i2s_instance = mconfig->vbus_id; 589 node_id.node.vindex = ssp_node.val; 590 break; 591 592 case SKL_DEVICE_DMIC: 593 node_id.node.dma_type = SKL_DMA_DMIC_LINK_INPUT_CLASS; 594 node_id.node.vindex = mconfig->vbus_id + 595 (mconfig->time_slot); 596 break; 597 598 case SKL_DEVICE_HDALINK: 599 node_id.node.dma_type = 600 (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? 601 SKL_DMA_HDA_LINK_OUTPUT_CLASS : 602 SKL_DMA_HDA_LINK_INPUT_CLASS; 603 node_id.node.vindex = params->link_dma_id; 604 break; 605 606 case SKL_DEVICE_HDAHOST: 607 node_id.node.dma_type = 608 (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? 609 SKL_DMA_HDA_HOST_OUTPUT_CLASS : 610 SKL_DMA_HDA_HOST_INPUT_CLASS; 611 node_id.node.vindex = params->host_dma_id; 612 break; 613 614 default: 615 node_id.val = 0xFFFFFFFF; 616 break; 617 } 618 619 return node_id.val; 620 } 621 622 static void skl_setup_cpr_gateway_cfg(struct skl_dev *skl, 623 struct skl_module_cfg *mconfig, 624 struct skl_cpr_cfg *cpr_mconfig) 625 { 626 u32 dma_io_buf; 627 struct skl_module_res *res; 628 int res_idx = mconfig->res_idx; 629 630 cpr_mconfig->gtw_cfg.node_id = skl_get_node_id(skl, mconfig); 631 632 if (cpr_mconfig->gtw_cfg.node_id == SKL_NON_GATEWAY_CPR_NODE_ID) { 633 cpr_mconfig->cpr_feature_mask = 0; 634 return; 635 } 636 637 if (skl->nr_modules) { 638 res = &mconfig->module->resources[mconfig->res_idx]; 639 cpr_mconfig->gtw_cfg.dma_buffer_size = res->dma_buffer_size; 640 goto skip_buf_size_calc; 641 } else { 642 res = &mconfig->module->resources[res_idx]; 643 } 644 645 switch (mconfig->hw_conn_type) { 646 case SKL_CONN_SOURCE: 647 if (mconfig->dev_type == SKL_DEVICE_HDAHOST) 648 dma_io_buf = res->ibs; 649 else 650 dma_io_buf = res->obs; 651 break; 652 653 case SKL_CONN_SINK: 654 if (mconfig->dev_type == SKL_DEVICE_HDAHOST) 655 dma_io_buf = res->obs; 656 else 657 dma_io_buf = res->ibs; 658 break; 659 660 default: 661 dev_warn(skl->dev, "wrong connection type: %d\n", 662 mconfig->hw_conn_type); 663 return; 664 } 665 666 cpr_mconfig->gtw_cfg.dma_buffer_size = 667 mconfig->dma_buffer_size * dma_io_buf; 668 669 /* fallback to 2ms default value */ 670 if (!cpr_mconfig->gtw_cfg.dma_buffer_size) { 671 if (mconfig->hw_conn_type == SKL_CONN_SOURCE) 672 cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->obs; 673 else 674 cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * res->ibs; 675 } 676 677 skip_buf_size_calc: 678 cpr_mconfig->cpr_feature_mask = 0; 679 cpr_mconfig->gtw_cfg.config_length = 0; 680 681 skl_copy_copier_caps(mconfig, cpr_mconfig); 682 } 683 684 #define DMA_CONTROL_ID 5 685 #define DMA_I2S_BLOB_SIZE 21 686 687 int skl_dsp_set_dma_control(struct skl_dev *skl, u32 *caps, 688 u32 caps_size, u32 node_id) 689 { 690 struct skl_dma_control *dma_ctrl; 691 struct skl_ipc_large_config_msg msg = {0}; 692 int err = 0; 693 694 695 /* 696 * if blob size zero, then return 697 */ 698 if (caps_size == 0) 699 return 0; 700 701 msg.large_param_id = DMA_CONTROL_ID; 702 msg.param_data_size = sizeof(struct skl_dma_control) + caps_size; 703 704 dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL); 705 if (dma_ctrl == NULL) 706 return -ENOMEM; 707 708 dma_ctrl->node_id = node_id; 709 710 /* 711 * NHLT blob may contain additional configs along with i2s blob. 712 * firmware expects only the i2s blob size as the config_length. 713 * So fix to i2s blob size. 714 * size in dwords. 715 */ 716 dma_ctrl->config_length = DMA_I2S_BLOB_SIZE; 717 718 memcpy(dma_ctrl->config_data, caps, caps_size); 719 720 err = skl_ipc_set_large_config(&skl->ipc, &msg, (u32 *)dma_ctrl); 721 722 kfree(dma_ctrl); 723 return err; 724 } 725 EXPORT_SYMBOL_GPL(skl_dsp_set_dma_control); 726 727 static void skl_setup_out_format(struct skl_dev *skl, 728 struct skl_module_cfg *mconfig, 729 struct skl_audio_data_format *out_fmt) 730 { 731 struct skl_module *module = mconfig->module; 732 struct skl_module_iface *fmt = &module->formats[mconfig->fmt_idx]; 733 struct skl_module_fmt *format = &fmt->outputs[0].fmt; 734 735 out_fmt->number_of_channels = (u8)format->channels; 736 out_fmt->s_freq = format->s_freq; 737 out_fmt->bit_depth = format->bit_depth; 738 out_fmt->valid_bit_depth = format->valid_bit_depth; 739 out_fmt->ch_cfg = format->ch_cfg; 740 741 out_fmt->channel_map = format->ch_map; 742 out_fmt->interleaving = format->interleaving_style; 743 out_fmt->sample_type = format->sample_type; 744 745 dev_dbg(skl->dev, "copier out format chan=%d fre=%d bitdepth=%d\n", 746 out_fmt->number_of_channels, format->s_freq, format->bit_depth); 747 } 748 749 /* 750 * DSP needs SRC module for frequency conversion, SRC takes base module 751 * configuration and the target frequency as extra parameter passed as src 752 * config 753 */ 754 static void skl_set_src_format(struct skl_dev *skl, 755 struct skl_module_cfg *mconfig, 756 struct skl_src_module_cfg *src_mconfig) 757 { 758 struct skl_module *module = mconfig->module; 759 struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; 760 struct skl_module_fmt *fmt = &iface->outputs[0].fmt; 761 762 skl_set_base_module_format(skl, mconfig, 763 (struct skl_base_cfg *)src_mconfig); 764 765 src_mconfig->src_cfg = fmt->s_freq; 766 } 767 768 /* 769 * DSP needs updown module to do channel conversion. updown module take base 770 * module configuration and channel configuration 771 * It also take coefficients and now we have defaults applied here 772 */ 773 static void skl_set_updown_mixer_format(struct skl_dev *skl, 774 struct skl_module_cfg *mconfig, 775 struct skl_up_down_mixer_cfg *mixer_mconfig) 776 { 777 struct skl_module *module = mconfig->module; 778 struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; 779 struct skl_module_fmt *fmt = &iface->outputs[0].fmt; 780 781 skl_set_base_module_format(skl, mconfig, 782 (struct skl_base_cfg *)mixer_mconfig); 783 mixer_mconfig->out_ch_cfg = fmt->ch_cfg; 784 mixer_mconfig->ch_map = fmt->ch_map; 785 } 786 787 /* 788 * 'copier' is DSP internal module which copies data from Host DMA (HDA host 789 * dma) or link (hda link, SSP, PDM) 790 * Here we calculate the copier module parameters, like PCM format, output 791 * format, gateway settings 792 * copier_module_config is sent as input buffer with INIT_INSTANCE IPC msg 793 */ 794 static void skl_set_copier_format(struct skl_dev *skl, 795 struct skl_module_cfg *mconfig, 796 struct skl_cpr_cfg *cpr_mconfig) 797 { 798 struct skl_audio_data_format *out_fmt = &cpr_mconfig->out_fmt; 799 struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)cpr_mconfig; 800 801 skl_set_base_module_format(skl, mconfig, base_cfg); 802 803 skl_setup_out_format(skl, mconfig, out_fmt); 804 skl_setup_cpr_gateway_cfg(skl, mconfig, cpr_mconfig); 805 } 806 807 /* 808 * Mic select module allows selecting one or many input channels, thus 809 * acting as a demux. 810 * 811 * Mic select module take base module configuration and out-format 812 * configuration 813 */ 814 static void skl_set_base_outfmt_format(struct skl_dev *skl, 815 struct skl_module_cfg *mconfig, 816 struct skl_base_outfmt_cfg *base_outfmt_mcfg) 817 { 818 struct skl_audio_data_format *out_fmt = &base_outfmt_mcfg->out_fmt; 819 struct skl_base_cfg *base_cfg = 820 (struct skl_base_cfg *)base_outfmt_mcfg; 821 822 skl_set_base_module_format(skl, mconfig, base_cfg); 823 skl_setup_out_format(skl, mconfig, out_fmt); 824 } 825 826 static u16 skl_get_module_param_size(struct skl_dev *skl, 827 struct skl_module_cfg *mconfig) 828 { 829 struct skl_module_res *res; 830 struct skl_module *module = mconfig->module; 831 u16 param_size; 832 833 switch (mconfig->m_type) { 834 case SKL_MODULE_TYPE_COPIER: 835 param_size = sizeof(struct skl_cpr_cfg); 836 param_size += mconfig->formats_config[SKL_PARAM_INIT].caps_size; 837 return param_size; 838 839 case SKL_MODULE_TYPE_SRCINT: 840 return sizeof(struct skl_src_module_cfg); 841 842 case SKL_MODULE_TYPE_UPDWMIX: 843 return sizeof(struct skl_up_down_mixer_cfg); 844 845 case SKL_MODULE_TYPE_BASE_OUTFMT: 846 case SKL_MODULE_TYPE_MIC_SELECT: 847 return sizeof(struct skl_base_outfmt_cfg); 848 849 case SKL_MODULE_TYPE_MIXER: 850 case SKL_MODULE_TYPE_KPB: 851 return sizeof(struct skl_base_cfg); 852 853 case SKL_MODULE_TYPE_ALGO: 854 default: 855 res = &module->resources[mconfig->res_idx]; 856 857 param_size = sizeof(struct skl_base_cfg) + sizeof(struct skl_base_cfg_ext); 858 param_size += (res->nr_input_pins + res->nr_output_pins) * 859 sizeof(struct skl_pin_format); 860 param_size += mconfig->formats_config[SKL_PARAM_INIT].caps_size; 861 862 return param_size; 863 } 864 865 return 0; 866 } 867 868 /* 869 * DSP firmware supports various modules like copier, SRC, updown etc. 870 * These modules required various parameters to be calculated and sent for 871 * the module initialization to DSP. By default a generic module needs only 872 * base module format configuration 873 */ 874 875 static int skl_set_module_format(struct skl_dev *skl, 876 struct skl_module_cfg *module_config, 877 u16 *module_config_size, 878 void **param_data) 879 { 880 u16 param_size; 881 882 param_size = skl_get_module_param_size(skl, module_config); 883 884 *param_data = kzalloc(param_size, GFP_KERNEL); 885 if (NULL == *param_data) 886 return -ENOMEM; 887 888 *module_config_size = param_size; 889 890 switch (module_config->m_type) { 891 case SKL_MODULE_TYPE_COPIER: 892 skl_set_copier_format(skl, module_config, *param_data); 893 break; 894 895 case SKL_MODULE_TYPE_SRCINT: 896 skl_set_src_format(skl, module_config, *param_data); 897 break; 898 899 case SKL_MODULE_TYPE_UPDWMIX: 900 skl_set_updown_mixer_format(skl, module_config, *param_data); 901 break; 902 903 case SKL_MODULE_TYPE_BASE_OUTFMT: 904 case SKL_MODULE_TYPE_MIC_SELECT: 905 skl_set_base_outfmt_format(skl, module_config, *param_data); 906 break; 907 908 case SKL_MODULE_TYPE_MIXER: 909 case SKL_MODULE_TYPE_KPB: 910 skl_set_base_module_format(skl, module_config, *param_data); 911 break; 912 913 case SKL_MODULE_TYPE_ALGO: 914 default: 915 skl_set_base_module_format(skl, module_config, *param_data); 916 skl_set_base_ext_module_format(skl, module_config, 917 *param_data + 918 sizeof(struct skl_base_cfg)); 919 break; 920 } 921 922 dev_dbg(skl->dev, "Module type=%d id=%d config size: %d bytes\n", 923 module_config->m_type, module_config->id.module_id, 924 param_size); 925 print_hex_dump_debug("Module params:", DUMP_PREFIX_OFFSET, 8, 4, 926 *param_data, param_size, false); 927 return 0; 928 } 929 930 static int skl_get_queue_index(struct skl_module_pin *mpin, 931 struct skl_module_inst_id id, int max) 932 { 933 int i; 934 935 for (i = 0; i < max; i++) { 936 if (mpin[i].id.module_id == id.module_id && 937 mpin[i].id.instance_id == id.instance_id) 938 return i; 939 } 940 941 return -EINVAL; 942 } 943 944 /* 945 * Allocates queue for each module. 946 * if dynamic, the pin_index is allocated 0 to max_pin. 947 * In static, the pin_index is fixed based on module_id and instance id 948 */ 949 static int skl_alloc_queue(struct skl_module_pin *mpin, 950 struct skl_module_cfg *tgt_cfg, int max) 951 { 952 int i; 953 struct skl_module_inst_id id = tgt_cfg->id; 954 /* 955 * if pin in dynamic, find first free pin 956 * otherwise find match module and instance id pin as topology will 957 * ensure a unique pin is assigned to this so no need to 958 * allocate/free 959 */ 960 for (i = 0; i < max; i++) { 961 if (mpin[i].is_dynamic) { 962 if (!mpin[i].in_use && 963 mpin[i].pin_state == SKL_PIN_UNBIND) { 964 965 mpin[i].in_use = true; 966 mpin[i].id.module_id = id.module_id; 967 mpin[i].id.instance_id = id.instance_id; 968 mpin[i].id.pvt_id = id.pvt_id; 969 mpin[i].tgt_mcfg = tgt_cfg; 970 return i; 971 } 972 } else { 973 if (mpin[i].id.module_id == id.module_id && 974 mpin[i].id.instance_id == id.instance_id && 975 mpin[i].pin_state == SKL_PIN_UNBIND) { 976 977 mpin[i].tgt_mcfg = tgt_cfg; 978 return i; 979 } 980 } 981 } 982 983 return -EINVAL; 984 } 985 986 static void skl_free_queue(struct skl_module_pin *mpin, int q_index) 987 { 988 if (mpin[q_index].is_dynamic) { 989 mpin[q_index].in_use = false; 990 mpin[q_index].id.module_id = 0; 991 mpin[q_index].id.instance_id = 0; 992 mpin[q_index].id.pvt_id = 0; 993 } 994 mpin[q_index].pin_state = SKL_PIN_UNBIND; 995 mpin[q_index].tgt_mcfg = NULL; 996 } 997 998 /* Module state will be set to unint, if all the out pin state is UNBIND */ 999 1000 static void skl_clear_module_state(struct skl_module_pin *mpin, int max, 1001 struct skl_module_cfg *mcfg) 1002 { 1003 int i; 1004 bool found = false; 1005 1006 for (i = 0; i < max; i++) { 1007 if (mpin[i].pin_state == SKL_PIN_UNBIND) 1008 continue; 1009 found = true; 1010 break; 1011 } 1012 1013 if (!found) 1014 mcfg->m_state = SKL_MODULE_INIT_DONE; 1015 return; 1016 } 1017 1018 /* 1019 * A module needs to be instanataited in DSP. A mdoule is present in a 1020 * collection of module referred as a PIPE. 1021 * We first calculate the module format, based on module type and then 1022 * invoke the DSP by sending IPC INIT_INSTANCE using ipc helper 1023 */ 1024 int skl_init_module(struct skl_dev *skl, 1025 struct skl_module_cfg *mconfig) 1026 { 1027 u16 module_config_size = 0; 1028 void *param_data = NULL; 1029 int ret; 1030 struct skl_ipc_init_instance_msg msg; 1031 1032 dev_dbg(skl->dev, "%s: module_id = %d instance=%d\n", __func__, 1033 mconfig->id.module_id, mconfig->id.pvt_id); 1034 1035 if (mconfig->pipe->state != SKL_PIPE_CREATED) { 1036 dev_err(skl->dev, "Pipe not created state= %d pipe_id= %d\n", 1037 mconfig->pipe->state, mconfig->pipe->ppl_id); 1038 return -EIO; 1039 } 1040 1041 ret = skl_set_module_format(skl, mconfig, 1042 &module_config_size, ¶m_data); 1043 if (ret < 0) { 1044 dev_err(skl->dev, "Failed to set module format ret=%d\n", ret); 1045 return ret; 1046 } 1047 1048 msg.module_id = mconfig->id.module_id; 1049 msg.instance_id = mconfig->id.pvt_id; 1050 msg.ppl_instance_id = mconfig->pipe->ppl_id; 1051 msg.param_data_size = module_config_size; 1052 msg.core_id = mconfig->core_id; 1053 msg.domain = mconfig->domain; 1054 1055 ret = skl_ipc_init_instance(&skl->ipc, &msg, param_data); 1056 if (ret < 0) { 1057 dev_err(skl->dev, "Failed to init instance ret=%d\n", ret); 1058 kfree(param_data); 1059 return ret; 1060 } 1061 mconfig->m_state = SKL_MODULE_INIT_DONE; 1062 kfree(param_data); 1063 return ret; 1064 } 1065 1066 static void skl_dump_bind_info(struct skl_dev *skl, struct skl_module_cfg 1067 *src_module, struct skl_module_cfg *dst_module) 1068 { 1069 dev_dbg(skl->dev, "%s: src module_id = %d src_instance=%d\n", 1070 __func__, src_module->id.module_id, src_module->id.pvt_id); 1071 dev_dbg(skl->dev, "%s: dst_module=%d dst_instance=%d\n", __func__, 1072 dst_module->id.module_id, dst_module->id.pvt_id); 1073 1074 dev_dbg(skl->dev, "src_module state = %d dst module state = %d\n", 1075 src_module->m_state, dst_module->m_state); 1076 } 1077 1078 /* 1079 * On module freeup, we need to unbind the module with modules 1080 * it is already bind. 1081 * Find the pin allocated and unbind then using bind_unbind IPC 1082 */ 1083 int skl_unbind_modules(struct skl_dev *skl, 1084 struct skl_module_cfg *src_mcfg, 1085 struct skl_module_cfg *dst_mcfg) 1086 { 1087 int ret; 1088 struct skl_ipc_bind_unbind_msg msg; 1089 struct skl_module_inst_id src_id = src_mcfg->id; 1090 struct skl_module_inst_id dst_id = dst_mcfg->id; 1091 int in_max = dst_mcfg->module->max_input_pins; 1092 int out_max = src_mcfg->module->max_output_pins; 1093 int src_index, dst_index, src_pin_state, dst_pin_state; 1094 1095 skl_dump_bind_info(skl, src_mcfg, dst_mcfg); 1096 1097 /* get src queue index */ 1098 src_index = skl_get_queue_index(src_mcfg->m_out_pin, dst_id, out_max); 1099 if (src_index < 0) 1100 return 0; 1101 1102 msg.src_queue = src_index; 1103 1104 /* get dst queue index */ 1105 dst_index = skl_get_queue_index(dst_mcfg->m_in_pin, src_id, in_max); 1106 if (dst_index < 0) 1107 return 0; 1108 1109 msg.dst_queue = dst_index; 1110 1111 src_pin_state = src_mcfg->m_out_pin[src_index].pin_state; 1112 dst_pin_state = dst_mcfg->m_in_pin[dst_index].pin_state; 1113 1114 if (src_pin_state != SKL_PIN_BIND_DONE || 1115 dst_pin_state != SKL_PIN_BIND_DONE) 1116 return 0; 1117 1118 msg.module_id = src_mcfg->id.module_id; 1119 msg.instance_id = src_mcfg->id.pvt_id; 1120 msg.dst_module_id = dst_mcfg->id.module_id; 1121 msg.dst_instance_id = dst_mcfg->id.pvt_id; 1122 msg.bind = false; 1123 1124 ret = skl_ipc_bind_unbind(&skl->ipc, &msg); 1125 if (!ret) { 1126 /* free queue only if unbind is success */ 1127 skl_free_queue(src_mcfg->m_out_pin, src_index); 1128 skl_free_queue(dst_mcfg->m_in_pin, dst_index); 1129 1130 /* 1131 * check only if src module bind state, bind is 1132 * always from src -> sink 1133 */ 1134 skl_clear_module_state(src_mcfg->m_out_pin, out_max, src_mcfg); 1135 } 1136 1137 return ret; 1138 } 1139 1140 #define CPR_SINK_FMT_PARAM_ID 2 1141 1142 /* 1143 * Once a module is instantiated it need to be 'bind' with other modules in 1144 * the pipeline. For binding we need to find the module pins which are bind 1145 * together 1146 * This function finds the pins and then sends bund_unbind IPC message to 1147 * DSP using IPC helper 1148 */ 1149 int skl_bind_modules(struct skl_dev *skl, 1150 struct skl_module_cfg *src_mcfg, 1151 struct skl_module_cfg *dst_mcfg) 1152 { 1153 int ret = 0; 1154 struct skl_ipc_bind_unbind_msg msg; 1155 int in_max = dst_mcfg->module->max_input_pins; 1156 int out_max = src_mcfg->module->max_output_pins; 1157 int src_index, dst_index; 1158 struct skl_module_fmt *format; 1159 struct skl_cpr_pin_fmt pin_fmt; 1160 struct skl_module *module; 1161 struct skl_module_iface *fmt; 1162 1163 skl_dump_bind_info(skl, src_mcfg, dst_mcfg); 1164 1165 if (src_mcfg->m_state < SKL_MODULE_INIT_DONE || 1166 dst_mcfg->m_state < SKL_MODULE_INIT_DONE) 1167 return 0; 1168 1169 src_index = skl_alloc_queue(src_mcfg->m_out_pin, dst_mcfg, out_max); 1170 if (src_index < 0) 1171 return -EINVAL; 1172 1173 msg.src_queue = src_index; 1174 dst_index = skl_alloc_queue(dst_mcfg->m_in_pin, src_mcfg, in_max); 1175 if (dst_index < 0) { 1176 skl_free_queue(src_mcfg->m_out_pin, src_index); 1177 return -EINVAL; 1178 } 1179 1180 /* 1181 * Copier module requires the separate large_config_set_ipc to 1182 * configure the pins other than 0 1183 */ 1184 if (src_mcfg->m_type == SKL_MODULE_TYPE_COPIER && src_index > 0) { 1185 pin_fmt.sink_id = src_index; 1186 module = src_mcfg->module; 1187 fmt = &module->formats[src_mcfg->fmt_idx]; 1188 1189 /* Input fmt is same as that of src module input cfg */ 1190 format = &fmt->inputs[0].fmt; 1191 fill_pin_params(&(pin_fmt.src_fmt), format); 1192 1193 format = &fmt->outputs[src_index].fmt; 1194 fill_pin_params(&(pin_fmt.dst_fmt), format); 1195 ret = skl_set_module_params(skl, (void *)&pin_fmt, 1196 sizeof(struct skl_cpr_pin_fmt), 1197 CPR_SINK_FMT_PARAM_ID, src_mcfg); 1198 1199 if (ret < 0) 1200 goto out; 1201 } 1202 1203 msg.dst_queue = dst_index; 1204 1205 dev_dbg(skl->dev, "src queue = %d dst queue =%d\n", 1206 msg.src_queue, msg.dst_queue); 1207 1208 msg.module_id = src_mcfg->id.module_id; 1209 msg.instance_id = src_mcfg->id.pvt_id; 1210 msg.dst_module_id = dst_mcfg->id.module_id; 1211 msg.dst_instance_id = dst_mcfg->id.pvt_id; 1212 msg.bind = true; 1213 1214 ret = skl_ipc_bind_unbind(&skl->ipc, &msg); 1215 1216 if (!ret) { 1217 src_mcfg->m_state = SKL_MODULE_BIND_DONE; 1218 src_mcfg->m_out_pin[src_index].pin_state = SKL_PIN_BIND_DONE; 1219 dst_mcfg->m_in_pin[dst_index].pin_state = SKL_PIN_BIND_DONE; 1220 return ret; 1221 } 1222 out: 1223 /* error case , if IPC fails, clear the queue index */ 1224 skl_free_queue(src_mcfg->m_out_pin, src_index); 1225 skl_free_queue(dst_mcfg->m_in_pin, dst_index); 1226 1227 return ret; 1228 } 1229 1230 static int skl_set_pipe_state(struct skl_dev *skl, struct skl_pipe *pipe, 1231 enum skl_ipc_pipeline_state state) 1232 { 1233 dev_dbg(skl->dev, "%s: pipe_state = %d\n", __func__, state); 1234 1235 return skl_ipc_set_pipeline_state(&skl->ipc, pipe->ppl_id, state); 1236 } 1237 1238 /* 1239 * A pipeline is a collection of modules. Before a module in instantiated a 1240 * pipeline needs to be created for it. 1241 * This function creates pipeline, by sending create pipeline IPC messages 1242 * to FW 1243 */ 1244 int skl_create_pipeline(struct skl_dev *skl, struct skl_pipe *pipe) 1245 { 1246 int ret; 1247 1248 dev_dbg(skl->dev, "%s: pipe_id = %d\n", __func__, pipe->ppl_id); 1249 1250 ret = skl_ipc_create_pipeline(&skl->ipc, pipe->memory_pages, 1251 pipe->pipe_priority, pipe->ppl_id, 1252 pipe->lp_mode); 1253 if (ret < 0) { 1254 dev_err(skl->dev, "Failed to create pipeline\n"); 1255 return ret; 1256 } 1257 1258 pipe->state = SKL_PIPE_CREATED; 1259 1260 return 0; 1261 } 1262 1263 /* 1264 * A pipeline needs to be deleted on cleanup. If a pipeline is running, 1265 * then pause it first. Before actual deletion, pipeline should enter 1266 * reset state. Finish the procedure by sending delete pipeline IPC. 1267 * DSP will stop the DMA engines and release resources 1268 */ 1269 int skl_delete_pipe(struct skl_dev *skl, struct skl_pipe *pipe) 1270 { 1271 int ret; 1272 1273 dev_dbg(skl->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); 1274 1275 /* If pipe was not created in FW, do not try to delete it */ 1276 if (pipe->state < SKL_PIPE_CREATED) 1277 return 0; 1278 1279 /* If pipe is started, do stop the pipe in FW. */ 1280 if (pipe->state >= SKL_PIPE_STARTED) { 1281 ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED); 1282 if (ret < 0) { 1283 dev_err(skl->dev, "Failed to stop pipeline\n"); 1284 return ret; 1285 } 1286 1287 pipe->state = SKL_PIPE_PAUSED; 1288 } 1289 1290 /* reset pipe state before deletion */ 1291 ret = skl_set_pipe_state(skl, pipe, PPL_RESET); 1292 if (ret < 0) { 1293 dev_err(skl->dev, "Failed to reset pipe ret=%d\n", ret); 1294 return ret; 1295 } 1296 1297 pipe->state = SKL_PIPE_RESET; 1298 1299 ret = skl_ipc_delete_pipeline(&skl->ipc, pipe->ppl_id); 1300 if (ret < 0) { 1301 dev_err(skl->dev, "Failed to delete pipeline\n"); 1302 return ret; 1303 } 1304 1305 pipe->state = SKL_PIPE_INVALID; 1306 1307 return ret; 1308 } 1309 1310 /* 1311 * A pipeline is also a scheduling entity in DSP which can be run, stopped 1312 * For processing data the pipe need to be run by sending IPC set pipe state 1313 * to DSP 1314 */ 1315 int skl_run_pipe(struct skl_dev *skl, struct skl_pipe *pipe) 1316 { 1317 int ret; 1318 1319 dev_dbg(skl->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); 1320 1321 /* If pipe was not created in FW, do not try to pause or delete */ 1322 if (pipe->state < SKL_PIPE_CREATED) 1323 return 0; 1324 1325 /* Pipe has to be paused before it is started */ 1326 ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED); 1327 if (ret < 0) { 1328 dev_err(skl->dev, "Failed to pause pipe\n"); 1329 return ret; 1330 } 1331 1332 pipe->state = SKL_PIPE_PAUSED; 1333 1334 ret = skl_set_pipe_state(skl, pipe, PPL_RUNNING); 1335 if (ret < 0) { 1336 dev_err(skl->dev, "Failed to start pipe\n"); 1337 return ret; 1338 } 1339 1340 pipe->state = SKL_PIPE_STARTED; 1341 1342 return 0; 1343 } 1344 1345 /* 1346 * Stop the pipeline by sending set pipe state IPC 1347 * DSP doesnt implement stop so we always send pause message 1348 */ 1349 int skl_stop_pipe(struct skl_dev *skl, struct skl_pipe *pipe) 1350 { 1351 int ret; 1352 1353 dev_dbg(skl->dev, "In %s pipe=%d\n", __func__, pipe->ppl_id); 1354 1355 /* If pipe was not created in FW, do not try to pause or delete */ 1356 if (pipe->state < SKL_PIPE_PAUSED) 1357 return 0; 1358 1359 ret = skl_set_pipe_state(skl, pipe, PPL_PAUSED); 1360 if (ret < 0) { 1361 dev_dbg(skl->dev, "Failed to stop pipe\n"); 1362 return ret; 1363 } 1364 1365 pipe->state = SKL_PIPE_PAUSED; 1366 1367 return 0; 1368 } 1369 1370 /* 1371 * Reset the pipeline by sending set pipe state IPC this will reset the DMA 1372 * from the DSP side 1373 */ 1374 int skl_reset_pipe(struct skl_dev *skl, struct skl_pipe *pipe) 1375 { 1376 int ret; 1377 1378 /* If pipe was not created in FW, do not try to pause or delete */ 1379 if (pipe->state < SKL_PIPE_PAUSED) 1380 return 0; 1381 1382 ret = skl_set_pipe_state(skl, pipe, PPL_RESET); 1383 if (ret < 0) { 1384 dev_dbg(skl->dev, "Failed to reset pipe ret=%d\n", ret); 1385 return ret; 1386 } 1387 1388 pipe->state = SKL_PIPE_RESET; 1389 1390 return 0; 1391 } 1392 1393 /* Algo parameter set helper function */ 1394 int skl_set_module_params(struct skl_dev *skl, u32 *params, int size, 1395 u32 param_id, struct skl_module_cfg *mcfg) 1396 { 1397 struct skl_ipc_large_config_msg msg; 1398 1399 msg.module_id = mcfg->id.module_id; 1400 msg.instance_id = mcfg->id.pvt_id; 1401 msg.param_data_size = size; 1402 msg.large_param_id = param_id; 1403 1404 return skl_ipc_set_large_config(&skl->ipc, &msg, params); 1405 } 1406 1407 int skl_get_module_params(struct skl_dev *skl, u32 *params, int size, 1408 u32 param_id, struct skl_module_cfg *mcfg) 1409 { 1410 struct skl_ipc_large_config_msg msg; 1411 size_t bytes = size; 1412 1413 msg.module_id = mcfg->id.module_id; 1414 msg.instance_id = mcfg->id.pvt_id; 1415 msg.param_data_size = size; 1416 msg.large_param_id = param_id; 1417 1418 return skl_ipc_get_large_config(&skl->ipc, &msg, ¶ms, &bytes); 1419 } 1420