1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * bytcr_wm5102.c - ASoc Machine driver for Intel Baytrail platforms with a 4 * Wolfson Microelectronics WM5102 codec 5 * 6 * Copyright (C) 2020 Hans de Goede <hdegoede@redhat.com> 7 * Loosely based on bytcr_rt5640.c which is: 8 * Copyright (C) 2014-2020 Intel Corp 9 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com> 10 */ 11 12 #include <linux/acpi.h> 13 #include <linux/clk.h> 14 #include <linux/device.h> 15 #include <linux/init.h> 16 #include <linux/module.h> 17 #include <linux/moduleparam.h> 18 #include <linux/platform_device.h> 19 #include <linux/slab.h> 20 #include <linux/spi/spi.h> 21 #include <sound/jack.h> 22 #include <sound/pcm.h> 23 #include <sound/pcm_params.h> 24 #include <sound/soc.h> 25 #include <sound/soc-acpi.h> 26 #include "../../codecs/wm5102.h" 27 #include "../atom/sst-atom-controls.h" 28 29 #define MCLK_FREQ 25000000 30 31 #define WM5102_MAX_SYSCLK_4K 49152000 /* max sysclk for 4K family */ 32 #define WM5102_MAX_SYSCLK_11025 45158400 /* max sysclk for 11.025K family */ 33 34 struct byt_wm5102_private { 35 struct snd_soc_jack jack; 36 struct clk *mclk; 37 struct gpio_desc *spkvdd_en_gpio; 38 }; 39 40 static int byt_wm5102_spkvdd_power_event(struct snd_soc_dapm_widget *w, 41 struct snd_kcontrol *kcontrol, int event) 42 { 43 struct snd_soc_card *card = w->dapm->card; 44 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); 45 46 gpiod_set_value_cansleep(priv->spkvdd_en_gpio, 47 !!SND_SOC_DAPM_EVENT_ON(event)); 48 49 return 0; 50 } 51 52 static int byt_wm5102_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, int rate) 53 { 54 struct snd_soc_component *codec_component = codec_dai->component; 55 int sr_mult = ((rate % 4000) == 0) ? 56 (WM5102_MAX_SYSCLK_4K / rate) : 57 (WM5102_MAX_SYSCLK_11025 / rate); 58 int ret; 59 60 /* Reset FLL1 */ 61 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0); 62 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); 63 64 /* Configure the FLL1 PLL before selecting it */ 65 ret = snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_CLK_SRC_MCLK1, 66 MCLK_FREQ, rate * sr_mult); 67 if (ret) { 68 dev_err(codec_component->dev, "Error setting PLL: %d\n", ret); 69 return ret; 70 } 71 72 ret = snd_soc_component_set_sysclk(codec_component, ARIZONA_CLK_SYSCLK, 73 ARIZONA_CLK_SRC_FLL1, rate * sr_mult, 74 SND_SOC_CLOCK_IN); 75 if (ret) { 76 dev_err(codec_component->dev, "Error setting SYSCLK: %d\n", ret); 77 return ret; 78 } 79 80 ret = snd_soc_dai_set_sysclk(codec_dai, ARIZONA_CLK_SYSCLK, 81 rate * 512, SND_SOC_CLOCK_IN); 82 if (ret) { 83 dev_err(codec_component->dev, "Error setting clock: %d\n", ret); 84 return ret; 85 } 86 87 return 0; 88 } 89 90 static int platform_clock_control(struct snd_soc_dapm_widget *w, 91 struct snd_kcontrol *k, int event) 92 { 93 struct snd_soc_dapm_context *dapm = w->dapm; 94 struct snd_soc_card *card = dapm->card; 95 struct snd_soc_dai *codec_dai; 96 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); 97 int ret; 98 99 codec_dai = snd_soc_card_get_codec_dai(card, "wm5102-aif1"); 100 if (!codec_dai) { 101 dev_err(card->dev, "Error codec DAI not found\n"); 102 return -EIO; 103 } 104 105 if (SND_SOC_DAPM_EVENT_ON(event)) { 106 ret = clk_prepare_enable(priv->mclk); 107 if (ret) { 108 dev_err(card->dev, "Error enabling MCLK: %d\n", ret); 109 return ret; 110 } 111 ret = byt_wm5102_prepare_and_enable_pll1(codec_dai, 48000); 112 if (ret) { 113 dev_err(card->dev, "Error setting codec sysclk: %d\n", ret); 114 return ret; 115 } 116 } else { 117 /* 118 * The WM5102 has a separate 32KHz clock for jack-detect 119 * so we can disable the PLL, followed by disabling the 120 * platform clock which is the source-clock for the PLL. 121 */ 122 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); 123 clk_disable_unprepare(priv->mclk); 124 } 125 126 return 0; 127 } 128 129 static const struct snd_soc_dapm_widget byt_wm5102_widgets[] = { 130 SND_SOC_DAPM_HP("Headphone", NULL), 131 SND_SOC_DAPM_MIC("Headset Mic", NULL), 132 SND_SOC_DAPM_MIC("Internal Mic", NULL), 133 SND_SOC_DAPM_SPK("Speaker", NULL), 134 SND_SOC_DAPM_LINE("Line Out", NULL), 135 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, 136 platform_clock_control, SND_SOC_DAPM_PRE_PMU | 137 SND_SOC_DAPM_POST_PMD), 138 SND_SOC_DAPM_SUPPLY("Speaker VDD", SND_SOC_NOPM, 0, 0, 139 byt_wm5102_spkvdd_power_event, 140 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), 141 }; 142 143 static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = { 144 {"Headphone", NULL, "Platform Clock"}, 145 {"Headset Mic", NULL, "Platform Clock"}, 146 {"Internal Mic", NULL, "Platform Clock"}, 147 {"Speaker", NULL, "Platform Clock"}, 148 {"Line Out", NULL, "Platform Clock"}, 149 150 {"Speaker", NULL, "SPKOUTLP"}, 151 {"Speaker", NULL, "SPKOUTLN"}, 152 {"Speaker", NULL, "SPKOUTRP"}, 153 {"Speaker", NULL, "SPKOUTRN"}, 154 {"Speaker", NULL, "Speaker VDD"}, 155 156 {"Headphone", NULL, "HPOUT1L"}, 157 {"Headphone", NULL, "HPOUT1R"}, 158 159 {"Internal Mic", NULL, "MICBIAS3"}, 160 {"IN3L", NULL, "Internal Mic"}, 161 162 /* 163 * The Headset Mix uses MICBIAS1 or 2 depending on if a CTIA/OMTP Headset 164 * is connected, as the MICBIAS is applied after the CTIA/OMTP cross-switch. 165 */ 166 {"Headset Mic", NULL, "MICBIAS1"}, 167 {"Headset Mic", NULL, "MICBIAS2"}, 168 {"IN1L", NULL, "Headset Mic"}, 169 170 {"AIF1 Playback", NULL, "ssp0 Tx"}, 171 {"ssp0 Tx", NULL, "modem_out"}, 172 173 {"modem_in", NULL, "ssp0 Rx"}, 174 {"ssp0 Rx", NULL, "AIF1 Capture"}, 175 }; 176 177 static const struct snd_kcontrol_new byt_wm5102_controls[] = { 178 SOC_DAPM_PIN_SWITCH("Headphone"), 179 SOC_DAPM_PIN_SWITCH("Headset Mic"), 180 SOC_DAPM_PIN_SWITCH("Internal Mic"), 181 SOC_DAPM_PIN_SWITCH("Speaker"), 182 SOC_DAPM_PIN_SWITCH("Line Out"), 183 }; 184 185 static struct snd_soc_jack_pin byt_wm5102_pins[] = { 186 { 187 .pin = "Headphone", 188 .mask = SND_JACK_HEADPHONE, 189 }, 190 { 191 .pin = "Headset Mic", 192 .mask = SND_JACK_MICROPHONE, 193 }, 194 { 195 .pin = "Line Out", 196 .mask = SND_JACK_LINEOUT, 197 }, 198 }; 199 200 static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) 201 { 202 struct snd_soc_card *card = runtime->card; 203 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); 204 struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component; 205 int ret, jack_type; 206 207 card->dapm.idle_bias_off = true; 208 209 ret = snd_soc_add_card_controls(card, byt_wm5102_controls, 210 ARRAY_SIZE(byt_wm5102_controls)); 211 if (ret) { 212 dev_err(card->dev, "Error adding card controls: %d\n", ret); 213 return ret; 214 } 215 216 /* 217 * The firmware might enable the clock at boot (this information 218 * may or may not be reflected in the enable clock register). 219 * To change the rate we must disable the clock first to cover these 220 * cases. Due to common clock framework restrictions that do not allow 221 * to disable a clock that has not been enabled, we need to enable 222 * the clock first. 223 */ 224 ret = clk_prepare_enable(priv->mclk); 225 if (!ret) 226 clk_disable_unprepare(priv->mclk); 227 228 ret = clk_set_rate(priv->mclk, MCLK_FREQ); 229 if (ret) { 230 dev_err(card->dev, "Error setting MCLK rate: %d\n", ret); 231 return ret; 232 } 233 234 jack_type = ARIZONA_JACK_MASK | SND_JACK_BTN_0 | SND_JACK_BTN_1 | 235 SND_JACK_BTN_2 | SND_JACK_BTN_3; 236 ret = snd_soc_card_jack_new_pins(card, "Headset", jack_type, 237 &priv->jack, byt_wm5102_pins, 238 ARRAY_SIZE(byt_wm5102_pins)); 239 if (ret) { 240 dev_err(card->dev, "Error creating jack: %d\n", ret); 241 return ret; 242 } 243 244 snd_soc_component_set_jack(component, &priv->jack, NULL); 245 246 return 0; 247 } 248 249 static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd, 250 struct snd_pcm_hw_params *params) 251 { 252 struct snd_interval *rate = hw_param_interval(params, 253 SNDRV_PCM_HW_PARAM_RATE); 254 struct snd_interval *channels = hw_param_interval(params, 255 SNDRV_PCM_HW_PARAM_CHANNELS); 256 int ret; 257 258 /* The DSP will convert the FE rate to 48k, stereo */ 259 rate->min = 48000; 260 rate->max = 48000; 261 channels->min = 2; 262 channels->max = 2; 263 264 /* set SSP0 to 16-bit */ 265 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); 266 267 /* 268 * Default mode for SSP configuration is TDM 4 slot, override config 269 * with explicit setting to I2S 2ch 16-bit. The word length is set with 270 * dai_set_tdm_slot() since there is no other API exposed 271 */ 272 ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), 273 SND_SOC_DAIFMT_I2S | 274 SND_SOC_DAIFMT_NB_NF | 275 SND_SOC_DAIFMT_BP_FP); 276 if (ret) { 277 dev_err(rtd->dev, "Error setting format to I2S: %d\n", ret); 278 return ret; 279 } 280 281 ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16); 282 if (ret) { 283 dev_err(rtd->dev, "Error setting I2S config: %d\n", ret); 284 return ret; 285 } 286 287 return 0; 288 } 289 290 static int byt_wm5102_aif1_startup(struct snd_pcm_substream *substream) 291 { 292 return snd_pcm_hw_constraint_single(substream->runtime, 293 SNDRV_PCM_HW_PARAM_RATE, 48000); 294 } 295 296 static const struct snd_soc_ops byt_wm5102_aif1_ops = { 297 .startup = byt_wm5102_aif1_startup, 298 }; 299 300 SND_SOC_DAILINK_DEF(dummy, 301 DAILINK_COMP_ARRAY(COMP_DUMMY())); 302 303 SND_SOC_DAILINK_DEF(media, 304 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); 305 306 SND_SOC_DAILINK_DEF(deepbuffer, 307 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); 308 309 SND_SOC_DAILINK_DEF(ssp0_port, 310 DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port"))); 311 312 SND_SOC_DAILINK_DEF(ssp0_codec, 313 DAILINK_COMP_ARRAY(COMP_CODEC( 314 /* 315 * Note there is no need to overwrite the codec-name as is done in 316 * other bytcr machine drivers, because the codec is a MFD child-dev. 317 */ 318 "wm5102-codec", 319 "wm5102-aif1"))); 320 321 SND_SOC_DAILINK_DEF(platform, 322 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); 323 324 static struct snd_soc_dai_link byt_wm5102_dais[] = { 325 [MERR_DPCM_AUDIO] = { 326 .name = "Baytrail Audio Port", 327 .stream_name = "Baytrail Audio", 328 .nonatomic = true, 329 .dynamic = 1, 330 .dpcm_playback = 1, 331 .dpcm_capture = 1, 332 .ops = &byt_wm5102_aif1_ops, 333 SND_SOC_DAILINK_REG(media, dummy, platform), 334 335 }, 336 [MERR_DPCM_DEEP_BUFFER] = { 337 .name = "Deep-Buffer Audio Port", 338 .stream_name = "Deep-Buffer Audio", 339 .nonatomic = true, 340 .dynamic = 1, 341 .dpcm_playback = 1, 342 .ops = &byt_wm5102_aif1_ops, 343 SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), 344 }, 345 /* back ends */ 346 { 347 /* 348 * This must be named SSP2-Codec even though this machine driver 349 * always uses SSP0. Most machine drivers support both and dynamically 350 * update the dailink to point to SSP0 or SSP2, while keeping the name 351 * as "SSP2-Codec". The SOF tplg files hardcode the "SSP2-Codec" even 352 * in the byt-foo-ssp0.tplg versions because the other machine-drivers 353 * use "SSP2-Codec" even when SSP0 is used. 354 */ 355 .name = "SSP2-Codec", 356 .id = 0, 357 .no_pcm = 1, 358 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF 359 | SND_SOC_DAIFMT_CBC_CFC, 360 .be_hw_params_fixup = byt_wm5102_codec_fixup, 361 .dpcm_playback = 1, 362 .dpcm_capture = 1, 363 .init = byt_wm5102_init, 364 SND_SOC_DAILINK_REG(ssp0_port, ssp0_codec, platform), 365 }, 366 }; 367 368 /* use space before codec name to simplify card ID, and simplify driver name */ 369 #define SOF_CARD_NAME "bytcht wm5102" /* card name will be 'sof-bytcht wm5102' */ 370 #define SOF_DRIVER_NAME "SOF" 371 372 #define CARD_NAME "bytcr-wm5102" 373 #define DRIVER_NAME NULL /* card name will be used for driver name */ 374 375 /* SoC card */ 376 static struct snd_soc_card byt_wm5102_card = { 377 .owner = THIS_MODULE, 378 .dai_link = byt_wm5102_dais, 379 .num_links = ARRAY_SIZE(byt_wm5102_dais), 380 .dapm_widgets = byt_wm5102_widgets, 381 .num_dapm_widgets = ARRAY_SIZE(byt_wm5102_widgets), 382 .dapm_routes = byt_wm5102_audio_map, 383 .num_dapm_routes = ARRAY_SIZE(byt_wm5102_audio_map), 384 .fully_routed = true, 385 }; 386 387 static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) 388 { 389 char codec_name[SND_ACPI_I2C_ID_LEN]; 390 struct device *dev = &pdev->dev; 391 struct byt_wm5102_private *priv; 392 struct snd_soc_acpi_mach *mach; 393 const char *platform_name; 394 struct acpi_device *adev; 395 struct device *codec_dev; 396 bool sof_parent; 397 int ret; 398 399 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 400 if (!priv) 401 return -ENOMEM; 402 403 /* Get MCLK */ 404 priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3"); 405 if (IS_ERR(priv->mclk)) 406 return dev_err_probe(dev, PTR_ERR(priv->mclk), "getting pmc_plt_clk_3\n"); 407 408 /* 409 * Get speaker VDD enable GPIO: 410 * 1. Get codec-device-name 411 * 2. Get codec-device 412 * 3. Get GPIO from codec-device 413 */ 414 mach = dev->platform_data; 415 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); 416 if (!adev) { 417 dev_err(dev, "Error cannot find acpi-dev for codec\n"); 418 return -ENOENT; 419 } 420 snprintf(codec_name, sizeof(codec_name), "spi-%s", acpi_dev_name(adev)); 421 422 codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, codec_name); 423 acpi_dev_put(adev); 424 if (!codec_dev) 425 return -EPROBE_DEFER; 426 427 /* Note no devm_ here since we call gpiod_get on codec_dev rather then dev */ 428 priv->spkvdd_en_gpio = gpiod_get(codec_dev, "wlf,spkvdd-ena", GPIOD_OUT_LOW); 429 put_device(codec_dev); 430 431 if (IS_ERR(priv->spkvdd_en_gpio)) { 432 ret = PTR_ERR(priv->spkvdd_en_gpio); 433 /* 434 * The spkvdd gpio-lookup is registered by: drivers/mfd/arizona-spi.c, 435 * so -ENOENT means that arizona-spi hasn't probed yet. 436 */ 437 if (ret == -ENOENT) 438 ret = -EPROBE_DEFER; 439 440 return dev_err_probe(dev, ret, "getting spkvdd-GPIO\n"); 441 } 442 443 /* override platform name, if required */ 444 byt_wm5102_card.dev = dev; 445 platform_name = mach->mach_params.platform; 446 ret = snd_soc_fixup_dai_links_platform_name(&byt_wm5102_card, platform_name); 447 if (ret) 448 goto out_put_gpio; 449 450 /* set card and driver name and pm-ops */ 451 sof_parent = snd_soc_acpi_sof_parent(dev); 452 if (sof_parent) { 453 byt_wm5102_card.name = SOF_CARD_NAME; 454 byt_wm5102_card.driver_name = SOF_DRIVER_NAME; 455 dev->driver->pm = &snd_soc_pm_ops; 456 } else { 457 byt_wm5102_card.name = CARD_NAME; 458 byt_wm5102_card.driver_name = DRIVER_NAME; 459 } 460 461 snd_soc_card_set_drvdata(&byt_wm5102_card, priv); 462 ret = devm_snd_soc_register_card(dev, &byt_wm5102_card); 463 if (ret) { 464 dev_err_probe(dev, ret, "registering card\n"); 465 goto out_put_gpio; 466 } 467 468 platform_set_drvdata(pdev, &byt_wm5102_card); 469 return 0; 470 471 out_put_gpio: 472 gpiod_put(priv->spkvdd_en_gpio); 473 return ret; 474 } 475 476 static void snd_byt_wm5102_mc_remove(struct platform_device *pdev) 477 { 478 struct snd_soc_card *card = platform_get_drvdata(pdev); 479 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); 480 481 gpiod_put(priv->spkvdd_en_gpio); 482 } 483 484 static struct platform_driver snd_byt_wm5102_mc_driver = { 485 .driver = { 486 .name = "bytcr_wm5102", 487 }, 488 .probe = snd_byt_wm5102_mc_probe, 489 .remove_new = snd_byt_wm5102_mc_remove, 490 }; 491 492 module_platform_driver(snd_byt_wm5102_mc_driver); 493 494 MODULE_DESCRIPTION("ASoC Baytrail with WM5102 codec machine driver"); 495 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 496 MODULE_LICENSE("GPL v2"); 497 MODULE_ALIAS("platform:bytcr_wm5102"); 498