1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform 4 * (derived from bytcr_rt5640.c) 5 * 6 * Copyright (C) 2015 Intel Corp 7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 8 * 9 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 10 */ 11 12 #include <linux/init.h> 13 #include <linux/i2c.h> 14 #include <linux/module.h> 15 #include <linux/platform_device.h> 16 #include <linux/property.h> 17 #include <linux/acpi.h> 18 #include <linux/clk.h> 19 #include <linux/device.h> 20 #include <linux/dmi.h> 21 #include <linux/input.h> 22 #include <linux/gpio/consumer.h> 23 #include <linux/gpio/machine.h> 24 #include <linux/slab.h> 25 #include <sound/pcm.h> 26 #include <sound/pcm_params.h> 27 #include <sound/soc.h> 28 #include <sound/jack.h> 29 #include <sound/soc-acpi.h> 30 #include "../../codecs/rt5651.h" 31 #include "../atom/sst-atom-controls.h" 32 #include "../common/soc-intel-quirks.h" 33 34 enum { 35 BYT_RT5651_DMIC_MAP, 36 BYT_RT5651_IN1_MAP, 37 BYT_RT5651_IN2_MAP, 38 BYT_RT5651_IN1_IN2_MAP, 39 }; 40 41 enum { 42 BYT_RT5651_JD_NULL = (RT5651_JD_NULL << 4), 43 BYT_RT5651_JD1_1 = (RT5651_JD1_1 << 4), 44 BYT_RT5651_JD1_2 = (RT5651_JD1_2 << 4), 45 BYT_RT5651_JD2 = (RT5651_JD2 << 4), 46 }; 47 48 enum { 49 BYT_RT5651_OVCD_TH_600UA = (6 << 8), 50 BYT_RT5651_OVCD_TH_1500UA = (15 << 8), 51 BYT_RT5651_OVCD_TH_2000UA = (20 << 8), 52 }; 53 54 enum { 55 BYT_RT5651_OVCD_SF_0P5 = (RT5651_OVCD_SF_0P5 << 13), 56 BYT_RT5651_OVCD_SF_0P75 = (RT5651_OVCD_SF_0P75 << 13), 57 BYT_RT5651_OVCD_SF_1P0 = (RT5651_OVCD_SF_1P0 << 13), 58 BYT_RT5651_OVCD_SF_1P5 = (RT5651_OVCD_SF_1P5 << 13), 59 }; 60 61 #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(3, 0)) 62 #define BYT_RT5651_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4) 63 #define BYT_RT5651_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8) 64 #define BYT_RT5651_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13) 65 #define BYT_RT5651_DMIC_EN BIT(16) 66 #define BYT_RT5651_MCLK_EN BIT(17) 67 #define BYT_RT5651_MCLK_25MHZ BIT(18) 68 #define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */ 69 #define BYT_RT5651_SSP0_AIF1 BIT(20) 70 #define BYT_RT5651_SSP0_AIF2 BIT(21) 71 #define BYT_RT5651_HP_LR_SWAPPED BIT(22) 72 #define BYT_RT5651_MONO_SPEAKER BIT(23) 73 #define BYT_RT5651_JD_NOT_INV BIT(24) 74 75 #define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ 76 BYT_RT5651_JD1_1 | \ 77 BYT_RT5651_OVCD_TH_2000UA | \ 78 BYT_RT5651_OVCD_SF_0P75) 79 80 /* jack-detect-source + inv + dmic-en + ovcd-th + -sf + terminating entry */ 81 #define MAX_NO_PROPS 6 82 83 struct byt_rt5651_private { 84 struct clk *mclk; 85 struct gpio_desc *ext_amp_gpio; 86 struct gpio_desc *hp_detect; 87 struct snd_soc_jack jack; 88 }; 89 90 static const struct acpi_gpio_mapping *byt_rt5651_gpios; 91 92 /* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ 93 static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | 94 BYT_RT5651_IN2_MAP; 95 96 static int quirk_override = -1; 97 module_param_named(quirk, quirk_override, int, 0444); 98 MODULE_PARM_DESC(quirk, "Board-specific quirk override"); 99 100 static void log_quirks(struct device *dev) 101 { 102 if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) 103 dev_info(dev, "quirk DMIC_MAP enabled"); 104 if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) 105 dev_info(dev, "quirk IN1_MAP enabled"); 106 if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) 107 dev_info(dev, "quirk IN2_MAP enabled"); 108 if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) 109 dev_info(dev, "quirk IN1_IN2_MAP enabled"); 110 if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { 111 dev_info(dev, "quirk realtek,jack-detect-source %ld\n", 112 BYT_RT5651_JDSRC(byt_rt5651_quirk)); 113 dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", 114 BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); 115 dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", 116 BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); 117 } 118 if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) 119 dev_info(dev, "quirk DMIC enabled"); 120 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) 121 dev_info(dev, "quirk MCLK_EN enabled"); 122 if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) 123 dev_info(dev, "quirk MCLK_25MHZ enabled"); 124 if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) 125 dev_info(dev, "quirk SSP2_AIF2 enabled\n"); 126 if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) 127 dev_info(dev, "quirk SSP0_AIF1 enabled\n"); 128 if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) 129 dev_info(dev, "quirk SSP0_AIF2 enabled\n"); 130 if (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) 131 dev_info(dev, "quirk MONO_SPEAKER enabled\n"); 132 if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) 133 dev_info(dev, "quirk JD_NOT_INV enabled\n"); 134 } 135 136 #define BYT_CODEC_DAI1 "rt5651-aif1" 137 #define BYT_CODEC_DAI2 "rt5651-aif2" 138 139 static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, 140 int rate, int bclk_ratio) 141 { 142 int clk_id, clk_freq, ret; 143 144 /* Configure the PLL before selecting it */ 145 if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { 146 clk_id = RT5651_PLL1_S_BCLK1, 147 clk_freq = rate * bclk_ratio; 148 } else { 149 clk_id = RT5651_PLL1_S_MCLK; 150 if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) 151 clk_freq = 25000000; 152 else 153 clk_freq = 19200000; 154 } 155 ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, rate * 512); 156 if (ret < 0) { 157 dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); 158 return ret; 159 } 160 161 ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, 162 rate * 512, SND_SOC_CLOCK_IN); 163 if (ret < 0) { 164 dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); 165 return ret; 166 } 167 168 return 0; 169 } 170 171 static int platform_clock_control(struct snd_soc_dapm_widget *w, 172 struct snd_kcontrol *k, int event) 173 { 174 struct snd_soc_dapm_context *dapm = w->dapm; 175 struct snd_soc_card *card = dapm->card; 176 struct snd_soc_dai *codec_dai; 177 struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); 178 int ret; 179 180 codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); 181 if (!codec_dai) 182 codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); 183 if (!codec_dai) { 184 dev_err(card->dev, 185 "Codec dai not found; Unable to set platform clock\n"); 186 return -EIO; 187 } 188 189 if (SND_SOC_DAPM_EVENT_ON(event)) { 190 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { 191 ret = clk_prepare_enable(priv->mclk); 192 if (ret < 0) { 193 dev_err(card->dev, 194 "could not configure MCLK state"); 195 return ret; 196 } 197 } 198 ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50); 199 } else { 200 /* 201 * Set codec clock source to internal clock before 202 * turning off the platform clock. Codec needs clock 203 * for Jack detection and button press 204 */ 205 ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, 206 48000 * 512, 207 SND_SOC_CLOCK_IN); 208 if (!ret) 209 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) 210 clk_disable_unprepare(priv->mclk); 211 } 212 213 if (ret < 0) { 214 dev_err(card->dev, "can't set codec sysclk: %d\n", ret); 215 return ret; 216 } 217 218 return 0; 219 } 220 221 static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, 222 struct snd_kcontrol *kcontrol, int event) 223 { 224 struct snd_soc_card *card = w->dapm->card; 225 struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); 226 227 if (SND_SOC_DAPM_EVENT_ON(event)) 228 gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); 229 else 230 gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); 231 232 return 0; 233 } 234 235 static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { 236 SND_SOC_DAPM_HP("Headphone", NULL), 237 SND_SOC_DAPM_MIC("Headset Mic", NULL), 238 SND_SOC_DAPM_MIC("Internal Mic", NULL), 239 SND_SOC_DAPM_SPK("Speaker", NULL), 240 SND_SOC_DAPM_LINE("Line In", NULL), 241 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, 242 platform_clock_control, SND_SOC_DAPM_PRE_PMU | 243 SND_SOC_DAPM_POST_PMD), 244 SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, 245 rt5651_ext_amp_power_event, 246 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), 247 }; 248 249 static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { 250 {"Headphone", NULL, "Platform Clock"}, 251 {"Headset Mic", NULL, "Platform Clock"}, 252 {"Internal Mic", NULL, "Platform Clock"}, 253 {"Speaker", NULL, "Platform Clock"}, 254 {"Speaker", NULL, "Ext Amp Power"}, 255 {"Line In", NULL, "Platform Clock"}, 256 257 {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ 258 {"Headphone", NULL, "HPOL"}, 259 {"Headphone", NULL, "HPOR"}, 260 {"Speaker", NULL, "LOUTL"}, 261 {"Speaker", NULL, "LOUTR"}, 262 {"IN2P", NULL, "Line In"}, 263 {"IN2N", NULL, "Line In"}, 264 265 }; 266 267 static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { 268 {"DMIC L1", NULL, "Internal Mic"}, 269 {"DMIC R1", NULL, "Internal Mic"}, 270 {"IN2P", NULL, "Headset Mic"}, 271 }; 272 273 static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { 274 {"Internal Mic", NULL, "micbias1"}, 275 {"IN1P", NULL, "Internal Mic"}, 276 {"IN3P", NULL, "Headset Mic"}, 277 }; 278 279 static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { 280 {"Internal Mic", NULL, "micbias1"}, 281 {"IN2P", NULL, "Internal Mic"}, 282 {"IN3P", NULL, "Headset Mic"}, 283 }; 284 285 static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { 286 {"Internal Mic", NULL, "micbias1"}, 287 {"IN1P", NULL, "Internal Mic"}, 288 {"IN2P", NULL, "Internal Mic"}, 289 {"IN3P", NULL, "Headset Mic"}, 290 }; 291 292 static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { 293 {"ssp0 Tx", NULL, "modem_out"}, 294 {"modem_in", NULL, "ssp0 Rx"}, 295 296 {"AIF1 Playback", NULL, "ssp0 Tx"}, 297 {"ssp0 Rx", NULL, "AIF1 Capture"}, 298 }; 299 300 static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = { 301 {"ssp0 Tx", NULL, "modem_out"}, 302 {"modem_in", NULL, "ssp0 Rx"}, 303 304 {"AIF2 Playback", NULL, "ssp0 Tx"}, 305 {"ssp0 Rx", NULL, "AIF2 Capture"}, 306 }; 307 308 static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = { 309 {"ssp2 Tx", NULL, "codec_out0"}, 310 {"ssp2 Tx", NULL, "codec_out1"}, 311 {"codec_in0", NULL, "ssp2 Rx"}, 312 {"codec_in1", NULL, "ssp2 Rx"}, 313 314 {"AIF1 Playback", NULL, "ssp2 Tx"}, 315 {"ssp2 Rx", NULL, "AIF1 Capture"}, 316 }; 317 318 static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = { 319 {"ssp2 Tx", NULL, "codec_out0"}, 320 {"ssp2 Tx", NULL, "codec_out1"}, 321 {"codec_in0", NULL, "ssp2 Rx"}, 322 {"codec_in1", NULL, "ssp2 Rx"}, 323 324 {"AIF2 Playback", NULL, "ssp2 Tx"}, 325 {"ssp2 Rx", NULL, "AIF2 Capture"}, 326 }; 327 328 static const struct snd_kcontrol_new byt_rt5651_controls[] = { 329 SOC_DAPM_PIN_SWITCH("Headphone"), 330 SOC_DAPM_PIN_SWITCH("Headset Mic"), 331 SOC_DAPM_PIN_SWITCH("Internal Mic"), 332 SOC_DAPM_PIN_SWITCH("Speaker"), 333 SOC_DAPM_PIN_SWITCH("Line In"), 334 }; 335 336 static struct snd_soc_jack_pin bytcr_jack_pins[] = { 337 { 338 .pin = "Headphone", 339 .mask = SND_JACK_HEADPHONE, 340 }, 341 { 342 .pin = "Headset Mic", 343 .mask = SND_JACK_MICROPHONE, 344 }, 345 }; 346 347 static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, 348 struct snd_pcm_hw_params *params) 349 { 350 struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); 351 struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); 352 snd_pcm_format_t format = params_format(params); 353 int rate = params_rate(params); 354 int bclk_ratio; 355 356 if (format == SNDRV_PCM_FORMAT_S16_LE) 357 bclk_ratio = 32; 358 else 359 bclk_ratio = 50; 360 361 return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio); 362 } 363 364 static const struct acpi_gpio_params pov_p1006w_hp_detect = { 1, 0, false }; 365 static const struct acpi_gpio_params pov_p1006w_ext_amp_en = { 2, 0, true }; 366 367 static const struct acpi_gpio_mapping byt_rt5651_pov_p1006w_gpios[] = { 368 { "hp-detect-gpios", &pov_p1006w_hp_detect, 1, }, 369 { "ext-amp-enable-gpios", &pov_p1006w_ext_amp_en, 1, }, 370 { }, 371 }; 372 373 static int byt_rt5651_pov_p1006w_quirk_cb(const struct dmi_system_id *id) 374 { 375 byt_rt5651_quirk = (unsigned long)id->driver_data; 376 byt_rt5651_gpios = byt_rt5651_pov_p1006w_gpios; 377 return 1; 378 } 379 380 static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) 381 { 382 byt_rt5651_quirk = (unsigned long)id->driver_data; 383 return 1; 384 } 385 386 static const struct dmi_system_id byt_rt5651_quirk_table[] = { 387 { 388 /* Chuwi Hi8 Pro (CWI513) */ 389 .callback = byt_rt5651_quirk_cb, 390 .matches = { 391 DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), 392 DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), 393 }, 394 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 395 BYT_RT5651_IN2_MAP | 396 BYT_RT5651_HP_LR_SWAPPED | 397 BYT_RT5651_MONO_SPEAKER), 398 }, 399 { 400 /* Chuwi Vi8 Plus (CWI519) */ 401 .callback = byt_rt5651_quirk_cb, 402 .matches = { 403 DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), 404 DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), 405 }, 406 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 407 BYT_RT5651_IN2_MAP | 408 BYT_RT5651_HP_LR_SWAPPED | 409 BYT_RT5651_MONO_SPEAKER), 410 }, 411 { 412 /* Complet Electro Serv MY8307 */ 413 .callback = byt_rt5651_quirk_cb, 414 .matches = { 415 DMI_MATCH(DMI_SYS_VENDOR, "Complet Electro Serv"), 416 DMI_MATCH(DMI_PRODUCT_NAME, "MY8307"), 417 }, 418 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 419 BYT_RT5651_IN2_MAP | 420 BYT_RT5651_MONO_SPEAKER | 421 BYT_RT5651_JD_NOT_INV), 422 }, 423 { 424 /* I.T.Works TW701, Ployer Momo7w and Trekstor ST70416-6 425 * (these all use the same mainboard) */ 426 .callback = byt_rt5651_quirk_cb, 427 .matches = { 428 DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), 429 /* Partial match for all of itWORKS.G.WI71C.JGBMRBA, 430 * TREK.G.WI71C.JGBMRBA0x and MOMO.G.WI71C.MABMRBA02 */ 431 DMI_MATCH(DMI_BIOS_VERSION, ".G.WI71C."), 432 }, 433 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 434 BYT_RT5651_IN2_MAP | 435 BYT_RT5651_SSP0_AIF1 | 436 BYT_RT5651_MONO_SPEAKER), 437 }, 438 { 439 /* KIANO SlimNote 14.2 */ 440 .callback = byt_rt5651_quirk_cb, 441 .matches = { 442 DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), 443 DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), 444 }, 445 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 446 BYT_RT5651_IN1_IN2_MAP), 447 }, 448 { 449 /* Minnowboard Max B3 */ 450 .callback = byt_rt5651_quirk_cb, 451 .matches = { 452 DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), 453 DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), 454 }, 455 .driver_data = (void *)(BYT_RT5651_IN1_MAP), 456 }, 457 { 458 /* Minnowboard Turbot */ 459 .callback = byt_rt5651_quirk_cb, 460 .matches = { 461 DMI_MATCH(DMI_SYS_VENDOR, "ADI"), 462 DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), 463 }, 464 .driver_data = (void *)(BYT_RT5651_MCLK_EN | 465 BYT_RT5651_IN1_MAP), 466 }, 467 { 468 /* Point of View mobii wintab p1006w (v1.0) */ 469 .callback = byt_rt5651_pov_p1006w_quirk_cb, 470 .matches = { 471 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), 472 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"), 473 /* Note 105b is Foxcon's USB/PCI vendor id */ 474 DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"), 475 DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"), 476 }, 477 .driver_data = (void *)(BYT_RT5651_DMIC_MAP | 478 BYT_RT5651_OVCD_TH_2000UA | 479 BYT_RT5651_OVCD_SF_0P75 | 480 BYT_RT5651_DMIC_EN | 481 BYT_RT5651_MCLK_EN | 482 BYT_RT5651_SSP0_AIF1), 483 }, 484 { 485 /* VIOS LTH17 */ 486 .callback = byt_rt5651_quirk_cb, 487 .matches = { 488 DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), 489 DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), 490 }, 491 .driver_data = (void *)(BYT_RT5651_IN1_IN2_MAP | 492 BYT_RT5651_JD1_1 | 493 BYT_RT5651_OVCD_TH_2000UA | 494 BYT_RT5651_OVCD_SF_1P0 | 495 BYT_RT5651_MCLK_EN), 496 }, 497 { 498 /* Yours Y8W81 (and others using the same mainboard) */ 499 .callback = byt_rt5651_quirk_cb, 500 .matches = { 501 DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), 502 /* Partial match for all devs with a W86C mainboard */ 503 DMI_MATCH(DMI_BIOS_VERSION, ".F.W86C."), 504 }, 505 .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | 506 BYT_RT5651_IN2_MAP | 507 BYT_RT5651_SSP0_AIF1 | 508 BYT_RT5651_MONO_SPEAKER), 509 }, 510 {} 511 }; 512 513 /* 514 * Note this MUST be called before snd_soc_register_card(), so that the props 515 * are in place before the codec component driver's probe function parses them. 516 */ 517 static int byt_rt5651_add_codec_device_props(struct device *i2c_dev) 518 { 519 struct property_entry props[MAX_NO_PROPS] = {}; 520 int cnt = 0; 521 522 props[cnt++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source", 523 BYT_RT5651_JDSRC(byt_rt5651_quirk)); 524 525 props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-threshold-microamp", 526 BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); 527 528 props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-scale-factor", 529 BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); 530 531 if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) 532 props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,dmic-en"); 533 534 if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) 535 props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); 536 537 return device_add_properties(i2c_dev, props); 538 } 539 540 static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) 541 { 542 struct snd_soc_card *card = runtime->card; 543 struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component; 544 struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); 545 const struct snd_soc_dapm_route *custom_map; 546 int num_routes; 547 int report; 548 int ret; 549 550 card->dapm.idle_bias_off = true; 551 552 /* Start with RC clk for jack-detect (we disable MCLK below) */ 553 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) 554 snd_soc_component_update_bits(codec, RT5651_GLB_CLK, 555 RT5651_SCLK_SRC_MASK, RT5651_SCLK_SRC_RCCLK); 556 557 switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { 558 case BYT_RT5651_IN1_MAP: 559 custom_map = byt_rt5651_intmic_in1_map; 560 num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); 561 break; 562 case BYT_RT5651_IN2_MAP: 563 custom_map = byt_rt5651_intmic_in2_map; 564 num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); 565 break; 566 case BYT_RT5651_IN1_IN2_MAP: 567 custom_map = byt_rt5651_intmic_in1_in2_map; 568 num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); 569 break; 570 default: 571 custom_map = byt_rt5651_intmic_dmic_map; 572 num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); 573 } 574 ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); 575 if (ret) 576 return ret; 577 578 if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) { 579 ret = snd_soc_dapm_add_routes(&card->dapm, 580 byt_rt5651_ssp2_aif2_map, 581 ARRAY_SIZE(byt_rt5651_ssp2_aif2_map)); 582 } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) { 583 ret = snd_soc_dapm_add_routes(&card->dapm, 584 byt_rt5651_ssp0_aif1_map, 585 ARRAY_SIZE(byt_rt5651_ssp0_aif1_map)); 586 } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) { 587 ret = snd_soc_dapm_add_routes(&card->dapm, 588 byt_rt5651_ssp0_aif2_map, 589 ARRAY_SIZE(byt_rt5651_ssp0_aif2_map)); 590 } else { 591 ret = snd_soc_dapm_add_routes(&card->dapm, 592 byt_rt5651_ssp2_aif1_map, 593 ARRAY_SIZE(byt_rt5651_ssp2_aif1_map)); 594 } 595 if (ret) 596 return ret; 597 598 ret = snd_soc_add_card_controls(card, byt_rt5651_controls, 599 ARRAY_SIZE(byt_rt5651_controls)); 600 if (ret) { 601 dev_err(card->dev, "unable to add card controls\n"); 602 return ret; 603 } 604 605 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { 606 /* 607 * The firmware might enable the clock at 608 * boot (this information may or may not 609 * be reflected in the enable clock register). 610 * To change the rate we must disable the clock 611 * first to cover these cases. Due to common 612 * clock framework restrictions that do not allow 613 * to disable a clock that has not been enabled, 614 * we need to enable the clock first. 615 */ 616 ret = clk_prepare_enable(priv->mclk); 617 if (!ret) 618 clk_disable_unprepare(priv->mclk); 619 620 if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) 621 ret = clk_set_rate(priv->mclk, 25000000); 622 else 623 ret = clk_set_rate(priv->mclk, 19200000); 624 625 if (ret) 626 dev_err(card->dev, "unable to set MCLK rate\n"); 627 } 628 629 report = 0; 630 if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) 631 report = SND_JACK_HEADSET | SND_JACK_BTN_0; 632 else if (priv->hp_detect) 633 report = SND_JACK_HEADSET; 634 635 if (report) { 636 ret = snd_soc_card_jack_new(runtime->card, "Headset", 637 report, &priv->jack, bytcr_jack_pins, 638 ARRAY_SIZE(bytcr_jack_pins)); 639 if (ret) { 640 dev_err(runtime->dev, "jack creation failed %d\n", ret); 641 return ret; 642 } 643 644 if (report & SND_JACK_BTN_0) 645 snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, 646 KEY_PLAYPAUSE); 647 648 ret = snd_soc_component_set_jack(codec, &priv->jack, 649 priv->hp_detect); 650 if (ret) 651 return ret; 652 } 653 654 return 0; 655 } 656 657 static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, 658 struct snd_pcm_hw_params *params) 659 { 660 struct snd_interval *rate = hw_param_interval(params, 661 SNDRV_PCM_HW_PARAM_RATE); 662 struct snd_interval *channels = hw_param_interval(params, 663 SNDRV_PCM_HW_PARAM_CHANNELS); 664 int ret, bits; 665 666 /* The DSP will covert the FE rate to 48k, stereo */ 667 rate->min = rate->max = 48000; 668 channels->min = channels->max = 2; 669 670 if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || 671 (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { 672 /* set SSP0 to 16-bit */ 673 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); 674 bits = 16; 675 } else { 676 /* set SSP2 to 24-bit */ 677 params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); 678 bits = 24; 679 } 680 681 /* 682 * Default mode for SSP configuration is TDM 4 slot, override config 683 * with explicit setting to I2S 2ch. The word length is set with 684 * dai_set_tdm_slot() since there is no other API exposed 685 */ 686 ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), 687 SND_SOC_DAIFMT_I2S | 688 SND_SOC_DAIFMT_NB_NF | 689 SND_SOC_DAIFMT_CBS_CFS 690 ); 691 692 if (ret < 0) { 693 dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); 694 return ret; 695 } 696 697 ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); 698 if (ret < 0) { 699 dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); 700 return ret; 701 } 702 703 return 0; 704 } 705 706 static const unsigned int rates_48000[] = { 707 48000, 708 }; 709 710 static const struct snd_pcm_hw_constraint_list constraints_48000 = { 711 .count = ARRAY_SIZE(rates_48000), 712 .list = rates_48000, 713 }; 714 715 static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream) 716 { 717 return snd_pcm_hw_constraint_list(substream->runtime, 0, 718 SNDRV_PCM_HW_PARAM_RATE, 719 &constraints_48000); 720 } 721 722 static const struct snd_soc_ops byt_rt5651_aif1_ops = { 723 .startup = byt_rt5651_aif1_startup, 724 }; 725 726 static const struct snd_soc_ops byt_rt5651_be_ssp2_ops = { 727 .hw_params = byt_rt5651_aif1_hw_params, 728 }; 729 730 SND_SOC_DAILINK_DEF(dummy, 731 DAILINK_COMP_ARRAY(COMP_DUMMY())); 732 733 SND_SOC_DAILINK_DEF(media, 734 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); 735 736 SND_SOC_DAILINK_DEF(deepbuffer, 737 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); 738 739 SND_SOC_DAILINK_DEF(ssp2_port, 740 DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); 741 SND_SOC_DAILINK_DEF(ssp2_codec, 742 DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5651:00", "rt5651-aif1"))); 743 744 SND_SOC_DAILINK_DEF(platform, 745 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); 746 747 static struct snd_soc_dai_link byt_rt5651_dais[] = { 748 [MERR_DPCM_AUDIO] = { 749 .name = "Audio Port", 750 .stream_name = "Audio", 751 .nonatomic = true, 752 .dynamic = 1, 753 .dpcm_playback = 1, 754 .dpcm_capture = 1, 755 .ops = &byt_rt5651_aif1_ops, 756 SND_SOC_DAILINK_REG(media, dummy, platform), 757 }, 758 [MERR_DPCM_DEEP_BUFFER] = { 759 .name = "Deep-Buffer Audio Port", 760 .stream_name = "Deep-Buffer Audio", 761 .nonatomic = true, 762 .dynamic = 1, 763 .dpcm_playback = 1, 764 .ops = &byt_rt5651_aif1_ops, 765 SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), 766 }, 767 /* CODEC<->CODEC link */ 768 /* back ends */ 769 { 770 .name = "SSP2-Codec", 771 .id = 0, 772 .no_pcm = 1, 773 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF 774 | SND_SOC_DAIFMT_CBS_CFS, 775 .be_hw_params_fixup = byt_rt5651_codec_fixup, 776 .nonatomic = true, 777 .dpcm_playback = 1, 778 .dpcm_capture = 1, 779 .init = byt_rt5651_init, 780 .ops = &byt_rt5651_be_ssp2_ops, 781 SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), 782 }, 783 }; 784 785 /* SoC card */ 786 static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; 787 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) 788 static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */ 789 #endif 790 static char byt_rt5651_components[50]; /* = "cfg-spk:* cfg-mic:*" */ 791 792 static int byt_rt5651_suspend(struct snd_soc_card *card) 793 { 794 struct snd_soc_component *component; 795 796 if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) 797 return 0; 798 799 for_each_card_components(card, component) { 800 if (!strcmp(component->name, byt_rt5651_codec_name)) { 801 dev_dbg(component->dev, "disabling jack detect before suspend\n"); 802 snd_soc_component_set_jack(component, NULL, NULL); 803 break; 804 } 805 } 806 807 return 0; 808 } 809 810 static int byt_rt5651_resume(struct snd_soc_card *card) 811 { 812 struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); 813 struct snd_soc_component *component; 814 815 if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) 816 return 0; 817 818 for_each_card_components(card, component) { 819 if (!strcmp(component->name, byt_rt5651_codec_name)) { 820 dev_dbg(component->dev, "re-enabling jack detect after resume\n"); 821 snd_soc_component_set_jack(component, &priv->jack, 822 priv->hp_detect); 823 break; 824 } 825 } 826 827 return 0; 828 } 829 830 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) 831 /* use space before codec name to simplify card ID, and simplify driver name */ 832 #define CARD_NAME "bytcht rt5651" /* card name will be 'sof-bytcht rt5651' */ 833 #define DRIVER_NAME "SOF" 834 #else 835 #define CARD_NAME "bytcr-rt5651" 836 #define DRIVER_NAME NULL /* card name will be used for driver name */ 837 #endif 838 839 static struct snd_soc_card byt_rt5651_card = { 840 .name = CARD_NAME, 841 .driver_name = DRIVER_NAME, 842 .owner = THIS_MODULE, 843 .dai_link = byt_rt5651_dais, 844 .num_links = ARRAY_SIZE(byt_rt5651_dais), 845 .dapm_widgets = byt_rt5651_widgets, 846 .num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets), 847 .dapm_routes = byt_rt5651_audio_map, 848 .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), 849 .fully_routed = true, 850 .suspend_pre = byt_rt5651_suspend, 851 .resume_post = byt_rt5651_resume, 852 }; 853 854 static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; 855 856 static const struct acpi_gpio_mapping cht_rt5651_gpios[] = { 857 /* 858 * Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, 859 * other boards may have I2cSerialBusV2, GpioInt, GpioIo instead. 860 * We want the GpioIo one for the ext-amp-enable-gpio. 861 */ 862 { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO }, 863 { }, 864 }; 865 866 struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ 867 u64 aif_value; /* 1: AIF1, 2: AIF2 */ 868 u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ 869 }; 870 871 static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) 872 { 873 static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" }; 874 struct byt_rt5651_private *priv; 875 struct snd_soc_acpi_mach *mach; 876 const char *platform_name; 877 struct acpi_device *adev; 878 struct device *codec_dev; 879 bool is_bytcr = false; 880 int ret_val = 0; 881 int dai_index = 0; 882 int i; 883 884 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 885 if (!priv) 886 return -ENOMEM; 887 888 /* register the soc card */ 889 byt_rt5651_card.dev = &pdev->dev; 890 891 mach = byt_rt5651_card.dev->platform_data; 892 snd_soc_card_set_drvdata(&byt_rt5651_card, priv); 893 894 /* fix index of codec dai */ 895 for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { 896 if (!strcmp(byt_rt5651_dais[i].codecs->name, 897 "i2c-10EC5651:00")) { 898 dai_index = i; 899 break; 900 } 901 } 902 903 /* fixup codec name based on HID */ 904 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); 905 if (adev) { 906 snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), 907 "i2c-%s", acpi_dev_name(adev)); 908 put_device(&adev->dev); 909 byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name; 910 } else { 911 dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); 912 return -ENODEV; 913 } 914 915 codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, 916 byt_rt5651_codec_name); 917 if (!codec_dev) 918 return -EPROBE_DEFER; 919 920 /* 921 * swap SSP0 if bytcr is detected 922 * (will be overridden if DMI quirk is detected) 923 */ 924 if (soc_intel_is_byt()) { 925 if (mach->mach_params.acpi_ipc_irq_index == 0) 926 is_bytcr = true; 927 } 928 929 if (is_bytcr) { 930 /* 931 * Baytrail CR platforms may have CHAN package in BIOS, try 932 * to find relevant routing quirk based as done on Windows 933 * platforms. We have to read the information directly from the 934 * BIOS, at this stage the card is not created and the links 935 * with the codec driver/pdata are non-existent 936 */ 937 938 struct acpi_chan_package chan_package; 939 940 /* format specified: 2 64-bit integers */ 941 struct acpi_buffer format = {sizeof("NN"), "NN"}; 942 struct acpi_buffer state = {0, NULL}; 943 struct snd_soc_acpi_package_context pkg_ctx; 944 bool pkg_found = false; 945 946 state.length = sizeof(chan_package); 947 state.pointer = &chan_package; 948 949 pkg_ctx.name = "CHAN"; 950 pkg_ctx.length = 2; 951 pkg_ctx.format = &format; 952 pkg_ctx.state = &state; 953 pkg_ctx.data_valid = false; 954 955 pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, 956 &pkg_ctx); 957 if (pkg_found) { 958 if (chan_package.aif_value == 1) { 959 dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); 960 byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1; 961 } else if (chan_package.aif_value == 2) { 962 dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); 963 byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; 964 } else { 965 dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); 966 pkg_found = false; 967 } 968 } 969 970 if (!pkg_found) { 971 /* no BIOS indications, assume SSP0-AIF2 connection */ 972 byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; 973 } 974 } 975 976 /* check quirks before creating card */ 977 dmi_check_system(byt_rt5651_quirk_table); 978 979 if (quirk_override != -1) { 980 dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n", 981 byt_rt5651_quirk, quirk_override); 982 byt_rt5651_quirk = quirk_override; 983 } 984 985 /* Must be called before register_card, also see declaration comment. */ 986 ret_val = byt_rt5651_add_codec_device_props(codec_dev); 987 if (ret_val) { 988 put_device(codec_dev); 989 return ret_val; 990 } 991 992 /* Cherry Trail devices use an external amplifier enable gpio */ 993 if (soc_intel_is_cht() && !byt_rt5651_gpios) 994 byt_rt5651_gpios = cht_rt5651_gpios; 995 996 if (byt_rt5651_gpios) { 997 devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); 998 priv->ext_amp_gpio = devm_fwnode_gpiod_get(&pdev->dev, 999 codec_dev->fwnode, 1000 "ext-amp-enable", 1001 GPIOD_OUT_LOW, 1002 "speaker-amp"); 1003 if (IS_ERR(priv->ext_amp_gpio)) { 1004 ret_val = PTR_ERR(priv->ext_amp_gpio); 1005 switch (ret_val) { 1006 case -ENOENT: 1007 priv->ext_amp_gpio = NULL; 1008 break; 1009 default: 1010 dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", 1011 ret_val); 1012 fallthrough; 1013 case -EPROBE_DEFER: 1014 put_device(codec_dev); 1015 return ret_val; 1016 } 1017 } 1018 priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev, 1019 codec_dev->fwnode, 1020 "hp-detect", 1021 GPIOD_IN, 1022 "hp-detect"); 1023 if (IS_ERR(priv->hp_detect)) { 1024 ret_val = PTR_ERR(priv->hp_detect); 1025 switch (ret_val) { 1026 case -ENOENT: 1027 priv->hp_detect = NULL; 1028 break; 1029 default: 1030 dev_err(&pdev->dev, "Failed to get hp-detect GPIO: %d\n", 1031 ret_val); 1032 fallthrough; 1033 case -EPROBE_DEFER: 1034 put_device(codec_dev); 1035 return ret_val; 1036 } 1037 } 1038 } 1039 1040 put_device(codec_dev); 1041 1042 log_quirks(&pdev->dev); 1043 1044 if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) || 1045 (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) 1046 byt_rt5651_dais[dai_index].codecs->dai_name = "rt5651-aif2"; 1047 1048 if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || 1049 (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) 1050 byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port"; 1051 1052 if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { 1053 priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); 1054 if (IS_ERR(priv->mclk)) { 1055 ret_val = PTR_ERR(priv->mclk); 1056 dev_err(&pdev->dev, 1057 "Failed to get MCLK from pmc_plt_clk_3: %d\n", 1058 ret_val); 1059 /* 1060 * Fall back to bit clock usage for -ENOENT (clock not 1061 * available likely due to missing dependencies), bail 1062 * for all other errors, including -EPROBE_DEFER 1063 */ 1064 if (ret_val != -ENOENT) 1065 return ret_val; 1066 byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; 1067 } 1068 } 1069 1070 snprintf(byt_rt5651_components, sizeof(byt_rt5651_components), 1071 "cfg-spk:%s cfg-mic:%s%s", 1072 (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? "1" : "2", 1073 mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], 1074 (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? 1075 " cfg-hp:lrswap" : ""); 1076 byt_rt5651_card.components = byt_rt5651_components; 1077 #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) 1078 snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), 1079 "bytcr-rt5651-%s-spk-%s-mic%s", 1080 (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? 1081 "mono" : "stereo", 1082 mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], 1083 (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? 1084 "-hp-swapped" : ""); 1085 byt_rt5651_card.long_name = byt_rt5651_long_name; 1086 #endif 1087 1088 /* override plaform name, if required */ 1089 platform_name = mach->mach_params.platform; 1090 1091 ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5651_card, 1092 platform_name); 1093 if (ret_val) 1094 return ret_val; 1095 1096 ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); 1097 1098 if (ret_val) { 1099 dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", 1100 ret_val); 1101 return ret_val; 1102 } 1103 platform_set_drvdata(pdev, &byt_rt5651_card); 1104 return ret_val; 1105 } 1106 1107 static struct platform_driver snd_byt_rt5651_mc_driver = { 1108 .driver = { 1109 .name = "bytcr_rt5651", 1110 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) 1111 .pm = &snd_soc_pm_ops, 1112 #endif 1113 }, 1114 .probe = snd_byt_rt5651_mc_probe, 1115 }; 1116 1117 module_platform_driver(snd_byt_rt5651_mc_driver); 1118 1119 MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651"); 1120 MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>"); 1121 MODULE_LICENSE("GPL v2"); 1122 MODULE_ALIAS("platform:bytcr_rt5651"); 1123